| Message ID | 1535714796-2211-1-git-send-email-phil.edworthy@renesas.com (mailing list archive) |
|---|---|
| State | Awaiting Upstream, archived |
| Headers | show |
| Series | clk: renesas: r9a06g032: Fix UART34567 clock rate | expand |
Hi Phil, On Fri, Aug 31, 2018 at 1:26 PM Phil Edworthy <phil.edworthy@renesas.com> wrote: > The clock for UARTs 0 through 2 is UART012, the clock for UARTs 3 through > 7 is UART34567. > For UART012, we stop the clock driver from changing the clock rate. This > is because the Synopsys UART driver simply sets the reference clock to 16x > the baud rate, but doesn't check if the actual rate is within the required > tolerance. The RZ/N1 clock divider can't provide this (we have to rely on > the UART's internal divider to set the correct clock rate), so you end up > with a clock rate that is way off what you wanted. > > In addition, since the clock is shared between multiple UARTs, you don't > want the driver trying to change the clock rate as it may affect the other > UARTs (which may not have been configured yet, so you don't know what baud > rate they will use). Normally, the clock rate is set early on before Linux > to some very high rate that supports all of the clock rates you want. > > This change stops the UART34567 clock rate from changing for the same > reasons. > > Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> i.e. will queue in clk-renesas-for-v4.20. Gr{oetje,eeting}s, Geert
diff --git a/drivers/clk/renesas/r9a06g032-clocks.c b/drivers/clk/renesas/r9a06g032-clocks.c index a0b6ecd..6d2b568 100644 --- a/drivers/clk/renesas/r9a06g032-clocks.c +++ b/drivers/clk/renesas/r9a06g032-clocks.c @@ -539,7 +539,8 @@ r9a06g032_div_round_rate(struct clk_hw *hw, * several uarts attached to this divider, and changing this impacts * everyone. */ - if (clk->index == R9A06G032_DIV_UART) { + if (clk->index == R9A06G032_DIV_UART || + clk->index == R9A06G032_DIV_P2_PG) { pr_devel("%s div uart hack!\n", __func__); return clk_get_rate(hw->clk); }
The clock for UARTs 0 through 2 is UART012, the clock for UARTs 3 through 7 is UART34567. For UART012, we stop the clock driver from changing the clock rate. This is because the Synopsys UART driver simply sets the reference clock to 16x the baud rate, but doesn't check if the actual rate is within the required tolerance. The RZ/N1 clock divider can't provide this (we have to rely on the UART's internal divider to set the correct clock rate), so you end up with a clock rate that is way off what you wanted. In addition, since the clock is shared between multiple UARTs, you don't want the driver trying to change the clock rate as it may affect the other UARTs (which may not have been configured yet, so you don't know what baud rate they will use). Normally, the clock rate is set early on before Linux to some very high rate that supports all of the clock rates you want. This change stops the UART34567 clock rate from changing for the same reasons. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> --- drivers/clk/renesas/r9a06g032-clocks.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)