| Message ID | 20180831144044.31713-3-kieran.bingham+renesas@ideasonboard.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Delegated to: | Geert Uytterhoeven |
| Headers | show |
| Series | VSP1 Updates | expand |
Hi Kieran, Thank you for the patch. On Friday, 31 August 2018 17:40:40 EEST Kieran Bingham wrote: > DRM pipelines now support tri-planar as well as packed formats with > YCbCr, however the pitch calculation was not updated to support this. > > Correct this by adjusting the bytesperline accordingly when 3 planes are > used. > > Fixes: 7863ac504bc5 ("drm: rcar-du: Add tri-planar memory formats support") > Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> I already have a similar patch from Matsuoka-san in my tree, please see https://patchwork.kernel.org/patch/10425565/. I'll update it with the fixes tag. > --- > drivers/media/platform/vsp1/vsp1_drm.c | 10 ++++++++++ > include/media/vsp1.h | 2 +- > 2 files changed, 11 insertions(+), 1 deletion(-) > > diff --git a/drivers/media/platform/vsp1/vsp1_drm.c > b/drivers/media/platform/vsp1/vsp1_drm.c index b9c0f695d002..b9afd98f6867 > 100644 > --- a/drivers/media/platform/vsp1/vsp1_drm.c > +++ b/drivers/media/platform/vsp1/vsp1_drm.c > @@ -814,6 +814,16 @@ int vsp1_du_atomic_update(struct device *dev, unsigned > int pipe_index, rpf->format.num_planes = fmtinfo->planes; > rpf->format.plane_fmt[0].bytesperline = cfg->pitch; > rpf->format.plane_fmt[1].bytesperline = cfg->pitch; > + > + /* > + * Packed YUV formats are subsampled, but the packing of two components > + * into a single plane compensates for this leaving the bytesperline > + * to be the correct value. For multiplanar formats we must adjust the > + * pitch accordingly. > + */ > + if (fmtinfo->planes == 3) > + rpf->format.plane_fmt[1].bytesperline /= fmtinfo->hsub; > + > rpf->alpha = cfg->alpha; > > rpf->mem.addr[0] = cfg->mem[0]; > diff --git a/include/media/vsp1.h b/include/media/vsp1.h > index 3093b9cb9067..0ce19b595cc7 100644 > --- a/include/media/vsp1.h > +++ b/include/media/vsp1.h > @@ -46,7 +46,7 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int > pipe_index, /** > * struct vsp1_du_atomic_config - VSP atomic configuration parameters > * @pixelformat: plane pixel format (V4L2 4CC) > - * @pitch: line pitch in bytes, for all planes > + * @pitch: line pitch in bytes Should I update the above-mentioned patch with this as well ? How about phrasing it as "line pitch in bytes for the first plane" ? > * @mem: DMA memory address for each plane of the frame buffer > * @src: source rectangle in the frame buffer (integer coordinates) > * @dst: destination rectangle on the display (integer coordinates)
Hi Laurent, On 14/09/18 11:25, Laurent Pinchart wrote: > Hi Kieran, > > Thank you for the patch. > > On Friday, 31 August 2018 17:40:40 EEST Kieran Bingham wrote: >> DRM pipelines now support tri-planar as well as packed formats with >> YCbCr, however the pitch calculation was not updated to support this. >> >> Correct this by adjusting the bytesperline accordingly when 3 planes are >> used. >> >> Fixes: 7863ac504bc5 ("drm: rcar-du: Add tri-planar memory formats support") >> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> > > I already have a similar patch from Matsuoka-san in my tree, please see > https://patchwork.kernel.org/patch/10425565/. I'll update it with the fixes > tag. > >> --- >> drivers/media/platform/vsp1/vsp1_drm.c | 10 ++++++++++ >> include/media/vsp1.h | 2 +- >> 2 files changed, 11 insertions(+), 1 deletion(-) >> >> diff --git a/drivers/media/platform/vsp1/vsp1_drm.c >> b/drivers/media/platform/vsp1/vsp1_drm.c index b9c0f695d002..b9afd98f6867 >> 100644 >> --- a/drivers/media/platform/vsp1/vsp1_drm.c >> +++ b/drivers/media/platform/vsp1/vsp1_drm.c >> @@ -814,6 +814,16 @@ int vsp1_du_atomic_update(struct device *dev, unsigned >> int pipe_index, rpf->format.num_planes = fmtinfo->planes; >> rpf->format.plane_fmt[0].bytesperline = cfg->pitch; >> rpf->format.plane_fmt[1].bytesperline = cfg->pitch; >> + >> + /* >> + * Packed YUV formats are subsampled, but the packing of two components >> + * into a single plane compensates for this leaving the bytesperline >> + * to be the correct value. For multiplanar formats we must adjust the >> + * pitch accordingly. >> + */ >> + if (fmtinfo->planes == 3) >> + rpf->format.plane_fmt[1].bytesperline /= fmtinfo->hsub; >> + >> rpf->alpha = cfg->alpha; >> >> rpf->mem.addr[0] = cfg->mem[0]; >> diff --git a/include/media/vsp1.h b/include/media/vsp1.h >> index 3093b9cb9067..0ce19b595cc7 100644 >> --- a/include/media/vsp1.h >> +++ b/include/media/vsp1.h >> @@ -46,7 +46,7 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int >> pipe_index, /** >> * struct vsp1_du_atomic_config - VSP atomic configuration parameters >> * @pixelformat: plane pixel format (V4L2 4CC) >> - * @pitch: line pitch in bytes, for all planes >> + * @pitch: line pitch in bytes > > Should I update the above-mentioned patch with this as well ? How about > phrasing it as "line pitch in bytes for the first plane" ? Yes, your suggestion sounds fine. The patch at [0] looks good to me as a fix for this issue. for: "v4l: vsp1: Fix YCbCr planar formats pitch calculation" [0] With the fixes tag, and documentation updated: Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> [0] https://patchwork.kernel.org/patch/10425565 > >> * @mem: DMA memory address for each plane of the frame buffer >> * @src: source rectangle in the frame buffer (integer coordinates) >> * @dst: destination rectangle on the display (integer coordinates) >
diff --git a/drivers/media/platform/vsp1/vsp1_drm.c b/drivers/media/platform/vsp1/vsp1_drm.c index b9c0f695d002..b9afd98f6867 100644 --- a/drivers/media/platform/vsp1/vsp1_drm.c +++ b/drivers/media/platform/vsp1/vsp1_drm.c @@ -814,6 +814,16 @@ int vsp1_du_atomic_update(struct device *dev, unsigned int pipe_index, rpf->format.num_planes = fmtinfo->planes; rpf->format.plane_fmt[0].bytesperline = cfg->pitch; rpf->format.plane_fmt[1].bytesperline = cfg->pitch; + + /* + * Packed YUV formats are subsampled, but the packing of two components + * into a single plane compensates for this leaving the bytesperline + * to be the correct value. For multiplanar formats we must adjust the + * pitch accordingly. + */ + if (fmtinfo->planes == 3) + rpf->format.plane_fmt[1].bytesperline /= fmtinfo->hsub; + rpf->alpha = cfg->alpha; rpf->mem.addr[0] = cfg->mem[0]; diff --git a/include/media/vsp1.h b/include/media/vsp1.h index 3093b9cb9067..0ce19b595cc7 100644 --- a/include/media/vsp1.h +++ b/include/media/vsp1.h @@ -46,7 +46,7 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int pipe_index, /** * struct vsp1_du_atomic_config - VSP atomic configuration parameters * @pixelformat: plane pixel format (V4L2 4CC) - * @pitch: line pitch in bytes, for all planes + * @pitch: line pitch in bytes * @mem: DMA memory address for each plane of the frame buffer * @src: source rectangle in the frame buffer (integer coordinates) * @dst: destination rectangle on the display (integer coordinates)
DRM pipelines now support tri-planar as well as packed formats with YCbCr, however the pitch calculation was not updated to support this. Correct this by adjusting the bytesperline accordingly when 3 planes are used. Fixes: 7863ac504bc5 ("drm: rcar-du: Add tri-planar memory formats support") Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> --- drivers/media/platform/vsp1/vsp1_drm.c | 10 ++++++++++ include/media/vsp1.h | 2 +- 2 files changed, 11 insertions(+), 1 deletion(-)