| Message ID | 1537445116-10780-2-git-send-email-akolli@codeaurora.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ath10k: Add support to update tx rate to mac80211 | expand |
Anilkumar Kolli <akolli@codeaurora.org> writes: > Current mac80211 has provision to update tx status through > ieee80211_tx_status() and ieee80211_tx_status_ext(). But > drivers like ath10k updates the tx status from the skb except > txrate, txrate will be updated from a different path, peer stats. > > Using ieee80211_tx_status_ext() in two different paths > - (one for the stats, one for the tx rate) will duplicate the stats. > > To avoid this stats duplication, ieee80211_tx_rate_update() is implemented. > > Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> > --- > V3: > - Added new API in mac80211 to update tx rate(Johannes) > > include/net/mac80211.h | 14 ++++++++++++++ > net/mac80211/status.c | 24 ++++++++++++++++++++++++ > 2 files changed, 38 insertions(+) > > diff --git a/include/net/mac80211.h b/include/net/mac80211.h > index 8c26d2d36cbe..042186a21770 100644 > --- a/include/net/mac80211.h > +++ b/include/net/mac80211.h > @@ -4331,6 +4331,20 @@ void ieee80211_sta_set_expected_throughput(struct ieee80211_sta *pubsta, > u32 thr); > > /** > + * ieee80211_tx_rate_update - transmit rate update callback > + * > + * This function can be used in drivers that does not have provision > + * in updating the tx rate in data path. > + * > + * @hw: the hardware the frame was transmitted by > + * @status: tx status information > + * @pubsta: the station to update the tx rate for. > + */ > +void ieee80211_tx_rate_update(struct ieee80211_hw *hw, > + struct ieee80211_sta *pubsta, > + struct ieee80211_tx_info *info); > + > +/** > * ieee80211_tx_status - transmit status callback > * > * Call this function for all transmitted frames after they have been > diff --git a/net/mac80211/status.c b/net/mac80211/status.c > index 9a6d7208bf4f..232297ddaa02 100644 > --- a/net/mac80211/status.c > +++ b/net/mac80211/status.c > @@ -988,6 +988,30 @@ void ieee80211_tx_status_ext(struct ieee80211_hw *hw, > } > EXPORT_SYMBOL(ieee80211_tx_status_ext); > > +void ieee80211_tx_rate_update(struct ieee80211_hw *hw, > + struct ieee80211_sta *pubsta, > + struct ieee80211_tx_info *info) > +{ > + struct ieee80211_local *local = hw_to_local(hw); > + struct ieee80211_supported_band *sband; > + struct sta_info *sta; > + struct ieee80211_tx_status status; > + > + sband = hw->wiphy->bands[info->band]; > + > + if (pubsta) { The function does nothing if pubsta is NULL; wouldn't it make more sense to just mandate that it isn't NULL rather than have this check? -Toke
On 2018-09-20 21:40, Toke Høiland-Jørgensen wrote: > Anilkumar Kolli <akolli@codeaurora.org> writes: > >> Current mac80211 has provision to update tx status through >> ieee80211_tx_status() and ieee80211_tx_status_ext(). But >> drivers like ath10k updates the tx status from the skb except >> txrate, txrate will be updated from a different path, peer stats. >> >> Using ieee80211_tx_status_ext() in two different paths >> - (one for the stats, one for the tx rate) will duplicate the stats. >> >> To avoid this stats duplication, ieee80211_tx_rate_update() is >> implemented. >> >> Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> >> --- >> V3: >> - Added new API in mac80211 to update tx rate(Johannes) >> >> include/net/mac80211.h | 14 ++++++++++++++ >> net/mac80211/status.c | 24 ++++++++++++++++++++++++ >> 2 files changed, 38 insertions(+) >> >> diff --git a/include/net/mac80211.h b/include/net/mac80211.h >> index 8c26d2d36cbe..042186a21770 100644 >> --- a/include/net/mac80211.h >> +++ b/include/net/mac80211.h >> @@ -4331,6 +4331,20 @@ void >> ieee80211_sta_set_expected_throughput(struct ieee80211_sta *pubsta, >> u32 thr); >> >> /** >> + * ieee80211_tx_rate_update - transmit rate update callback >> + * >> + * This function can be used in drivers that does not have provision >> + * in updating the tx rate in data path. >> + * >> + * @hw: the hardware the frame was transmitted by >> + * @status: tx status information >> + * @pubsta: the station to update the tx rate for. >> + */ >> +void ieee80211_tx_rate_update(struct ieee80211_hw *hw, >> + struct ieee80211_sta *pubsta, >> + struct ieee80211_tx_info *info); >> + >> +/** >> * ieee80211_tx_status - transmit status callback >> * >> * Call this function for all transmitted frames after they have been >> diff --git a/net/mac80211/status.c b/net/mac80211/status.c >> index 9a6d7208bf4f..232297ddaa02 100644 >> --- a/net/mac80211/status.c >> +++ b/net/mac80211/status.c >> @@ -988,6 +988,30 @@ void ieee80211_tx_status_ext(struct ieee80211_hw >> *hw, >> } >> EXPORT_SYMBOL(ieee80211_tx_status_ext); >> >> +void ieee80211_tx_rate_update(struct ieee80211_hw *hw, >> + struct ieee80211_sta *pubsta, >> + struct ieee80211_tx_info *info) >> +{ >> + struct ieee80211_local *local = hw_to_local(hw); >> + struct ieee80211_supported_band *sband; >> + struct sta_info *sta; >> + struct ieee80211_tx_status status; >> + >> + sband = hw->wiphy->bands[info->band]; >> + >> + if (pubsta) { > > The function does nothing if pubsta is NULL; wouldn't it make more > sense > to just mandate that it isn't NULL rather than have this check? > ATH10K driver always calls this function with a valid STA [not NULL]. Thanks Anil.
Anilkumar Kolli <akolli@codeaurora.org> writes: > On 2018-09-20 21:40, Toke Høiland-Jørgensen wrote: >> Anilkumar Kolli <akolli@codeaurora.org> writes: >> >>> Current mac80211 has provision to update tx status through >>> ieee80211_tx_status() and ieee80211_tx_status_ext(). But >>> drivers like ath10k updates the tx status from the skb except >>> txrate, txrate will be updated from a different path, peer stats. >>> >>> Using ieee80211_tx_status_ext() in two different paths >>> - (one for the stats, one for the tx rate) will duplicate the stats. >>> >>> To avoid this stats duplication, ieee80211_tx_rate_update() is >>> implemented. >>> >>> Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> >>> --- >>> V3: >>> - Added new API in mac80211 to update tx rate(Johannes) >>> >>> include/net/mac80211.h | 14 ++++++++++++++ >>> net/mac80211/status.c | 24 ++++++++++++++++++++++++ >>> 2 files changed, 38 insertions(+) >>> >>> diff --git a/include/net/mac80211.h b/include/net/mac80211.h >>> index 8c26d2d36cbe..042186a21770 100644 >>> --- a/include/net/mac80211.h >>> +++ b/include/net/mac80211.h >>> @@ -4331,6 +4331,20 @@ void >>> ieee80211_sta_set_expected_throughput(struct ieee80211_sta *pubsta, >>> u32 thr); >>> >>> /** >>> + * ieee80211_tx_rate_update - transmit rate update callback >>> + * >>> + * This function can be used in drivers that does not have provision >>> + * in updating the tx rate in data path. >>> + * >>> + * @hw: the hardware the frame was transmitted by >>> + * @status: tx status information >>> + * @pubsta: the station to update the tx rate for. >>> + */ >>> +void ieee80211_tx_rate_update(struct ieee80211_hw *hw, >>> + struct ieee80211_sta *pubsta, >>> + struct ieee80211_tx_info *info); >>> + >>> +/** >>> * ieee80211_tx_status - transmit status callback >>> * >>> * Call this function for all transmitted frames after they have been >>> diff --git a/net/mac80211/status.c b/net/mac80211/status.c >>> index 9a6d7208bf4f..232297ddaa02 100644 >>> --- a/net/mac80211/status.c >>> +++ b/net/mac80211/status.c >>> @@ -988,6 +988,30 @@ void ieee80211_tx_status_ext(struct ieee80211_hw >>> *hw, >>> } >>> EXPORT_SYMBOL(ieee80211_tx_status_ext); >>> >>> +void ieee80211_tx_rate_update(struct ieee80211_hw *hw, >>> + struct ieee80211_sta *pubsta, >>> + struct ieee80211_tx_info *info) >>> +{ >>> + struct ieee80211_local *local = hw_to_local(hw); >>> + struct ieee80211_supported_band *sband; >>> + struct sta_info *sta; >>> + struct ieee80211_tx_status status; >>> + >>> + sband = hw->wiphy->bands[info->band]; >>> + >>> + if (pubsta) { >> >> The function does nothing if pubsta is NULL; wouldn't it make more >> sense >> to just mandate that it isn't NULL rather than have this check? >> > > ATH10K driver always calls this function with a valid STA [not NULL]. Yeah, so why the check for non-NULL? :) -Toke
On 2018-09-21 17:51, Toke Høiland-Jørgensen wrote: > Anilkumar Kolli <akolli@codeaurora.org> writes: > >> On 2018-09-20 21:40, Toke Høiland-Jørgensen wrote: >>> Anilkumar Kolli <akolli@codeaurora.org> writes: >>> >>>> Current mac80211 has provision to update tx status through >>>> ieee80211_tx_status() and ieee80211_tx_status_ext(). But >>>> drivers like ath10k updates the tx status from the skb except >>>> txrate, txrate will be updated from a different path, peer stats. >>>> >>>> Using ieee80211_tx_status_ext() in two different paths >>>> - (one for the stats, one for the tx rate) will duplicate the >>>> stats. >>>> >>>> To avoid this stats duplication, ieee80211_tx_rate_update() is >>>> implemented. >>>> >>>> Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> >>>> --- >>>> V3: >>>> - Added new API in mac80211 to update tx rate(Johannes) >>>> >>>> include/net/mac80211.h | 14 ++++++++++++++ >>>> net/mac80211/status.c | 24 ++++++++++++++++++++++++ >>>> 2 files changed, 38 insertions(+) >>>> >>>> diff --git a/include/net/mac80211.h b/include/net/mac80211.h >>>> index 8c26d2d36cbe..042186a21770 100644 >>>> --- a/include/net/mac80211.h >>>> +++ b/include/net/mac80211.h >>>> @@ -4331,6 +4331,20 @@ void >>>> ieee80211_sta_set_expected_throughput(struct ieee80211_sta *pubsta, >>>> u32 thr); >>>> >>>> /** >>>> + * ieee80211_tx_rate_update - transmit rate update callback >>>> + * >>>> + * This function can be used in drivers that does not have >>>> provision >>>> + * in updating the tx rate in data path. >>>> + * >>>> + * @hw: the hardware the frame was transmitted by >>>> + * @status: tx status information >>>> + * @pubsta: the station to update the tx rate for. >>>> + */ >>>> +void ieee80211_tx_rate_update(struct ieee80211_hw *hw, >>>> + struct ieee80211_sta *pubsta, >>>> + struct ieee80211_tx_info *info); >>>> + >>>> +/** >>>> * ieee80211_tx_status - transmit status callback >>>> * >>>> * Call this function for all transmitted frames after they have >>>> been >>>> diff --git a/net/mac80211/status.c b/net/mac80211/status.c >>>> index 9a6d7208bf4f..232297ddaa02 100644 >>>> --- a/net/mac80211/status.c >>>> +++ b/net/mac80211/status.c >>>> @@ -988,6 +988,30 @@ void ieee80211_tx_status_ext(struct >>>> ieee80211_hw >>>> *hw, >>>> } >>>> EXPORT_SYMBOL(ieee80211_tx_status_ext); >>>> >>>> +void ieee80211_tx_rate_update(struct ieee80211_hw *hw, >>>> + struct ieee80211_sta *pubsta, >>>> + struct ieee80211_tx_info *info) >>>> +{ >>>> + struct ieee80211_local *local = hw_to_local(hw); >>>> + struct ieee80211_supported_band *sband; >>>> + struct sta_info *sta; >>>> + struct ieee80211_tx_status status; >>>> + >>>> + sband = hw->wiphy->bands[info->band]; >>>> + >>>> + if (pubsta) { >>> >>> The function does nothing if pubsta is NULL; wouldn't it make more >>> sense >>> to just mandate that it isn't NULL rather than have this check? >>> >> >> ATH10K driver always calls this function with a valid STA [not NULL]. > > Yeah, so why the check for non-NULL? :) > Agreed we can remove this check since ath10k driver calls ieee80211_tx_rate_update() with a valid STA. This adds a sanity check to avoid NULL dereference on pubsta. I will update the comments on ieee80211_tx_rate_update() and send RFCv4. Thanks Anil.
diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 8c26d2d36cbe..042186a21770 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -4331,6 +4331,20 @@ void ieee80211_sta_set_expected_throughput(struct ieee80211_sta *pubsta, u32 thr); /** + * ieee80211_tx_rate_update - transmit rate update callback + * + * This function can be used in drivers that does not have provision + * in updating the tx rate in data path. + * + * @hw: the hardware the frame was transmitted by + * @status: tx status information + * @pubsta: the station to update the tx rate for. + */ +void ieee80211_tx_rate_update(struct ieee80211_hw *hw, + struct ieee80211_sta *pubsta, + struct ieee80211_tx_info *info); + +/** * ieee80211_tx_status - transmit status callback * * Call this function for all transmitted frames after they have been diff --git a/net/mac80211/status.c b/net/mac80211/status.c index 9a6d7208bf4f..232297ddaa02 100644 --- a/net/mac80211/status.c +++ b/net/mac80211/status.c @@ -988,6 +988,30 @@ void ieee80211_tx_status_ext(struct ieee80211_hw *hw, } EXPORT_SYMBOL(ieee80211_tx_status_ext); +void ieee80211_tx_rate_update(struct ieee80211_hw *hw, + struct ieee80211_sta *pubsta, + struct ieee80211_tx_info *info) +{ + struct ieee80211_local *local = hw_to_local(hw); + struct ieee80211_supported_band *sband; + struct sta_info *sta; + struct ieee80211_tx_status status; + + sband = hw->wiphy->bands[info->band]; + + if (pubsta) { + sta = container_of(pubsta, struct sta_info, sta); + status.skb = NULL; + status.info = info; + status.sta = pubsta; + + rate_control_tx_status(local, sband, &status); + if (ieee80211_hw_check(&local->hw, HAS_RATE_CONTROL)) + sta->tx_stats.last_rate = info->status.rates[0]; + } +} +EXPORT_SYMBOL(ieee80211_tx_rate_update); + void ieee80211_report_low_ack(struct ieee80211_sta *pubsta, u32 num_packets) { struct sta_info *sta = container_of(pubsta, struct sta_info, sta);
Current mac80211 has provision to update tx status through ieee80211_tx_status() and ieee80211_tx_status_ext(). But drivers like ath10k updates the tx status from the skb except txrate, txrate will be updated from a different path, peer stats. Using ieee80211_tx_status_ext() in two different paths - (one for the stats, one for the tx rate) will duplicate the stats. To avoid this stats duplication, ieee80211_tx_rate_update() is implemented. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> --- V3: - Added new API in mac80211 to update tx rate(Johannes) include/net/mac80211.h | 14 ++++++++++++++ net/mac80211/status.c | 24 ++++++++++++++++++++++++ 2 files changed, 38 insertions(+)