==============
unlock mutex before goto "out_unlocked",
if active reset is in progress.
v2 change set:
==============
1) Use pci_device_is_present instead of
mpt3sas_base_pci_device_is_unplugged.
2) As suggested by Lukas, removed using
watchdog thread for checking hba hot unplug(Patch 02 of V1).
Added Hot unplug checks in scan finish and reset paths.
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
---
drivers/scsi/mpt3sas/mpt3sas_base.c | 46 ++++++++++++++++++++++++++++++++-
drivers/scsi/mpt3sas/mpt3sas_base.h | 2 +-
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 50 ++++++++++++++++++++++++++++++++----
3 files changed, 91 insertions(+), 7 deletions(-)
@@ -62,7 +62,6 @@
#include <asm/page.h> /* To get host page size per arch */
#include <linux/aer.h>
-
#include "mpt3sas_base.h"
static MPT_CALLBACK mpt_callbacks[MPT_MAX_CALLBACKS];
@@ -543,6 +542,24 @@ static int mpt3sas_remove_dead_ioc_func(void *arg)
}
/**
+ * mpt3sas_base_pci_device_is_available - check whether pci device is
+ * available for any transactions with FW
+ *
+ * @ioc: per adapter object
+ *
+ * Return 1 if pci device state is up and running else return 0.
+ */
+u8
+mpt3sas_base_pci_device_is_available(struct MPT3SAS_ADAPTER *ioc)
+{
+ if (ioc->pci_error_recovery ||
+ (!pci_device_is_present(ioc->pdev)))
+ return 0;
+
+ return 1;
+}
+
+/**
* _base_fault_reset_work - workq handling ioc fault conditions
* @work: input argument, used to derive ioc
*
@@ -6122,6 +6139,11 @@ _base_diag_reset(struct MPT3SAS_ADAPTER *ioc)
count = 0;
do {
+ if (!pci_device_is_present(ioc->pdev)) {
+ ioc->remove_host = 1;
+ pr_err(MPT3SAS_FMT "Hba Hot unplugged\n", ioc->name);
+ goto out;
+ }
/* Write magic sequence to WriteSequence register
* Loop until in diagnostic mode
*/
@@ -6853,6 +6875,14 @@ mpt3sas_wait_for_commands_to_complete(struct MPT3SAS_ADAPTER *ioc)
ioc->pending_io_count = 0;
+ if (!mpt3sas_base_pci_device_is_available(ioc)) {
+ pr_err(MPT3SAS_FMT
+ "%s: pci error recovery reset or"
+ " pci device unplug occurred\n",
+ ioc->name, __func__);
+ return;
+ }
+
ioc_state = mpt3sas_base_get_iocstate(ioc, 0);
if ((ioc_state & MPI2_IOC_STATE_MASK) != MPI2_IOC_STATE_OPERATIONAL)
return;
@@ -6899,6 +6929,20 @@ mpt3sas_base_hard_reset_handler(struct MPT3SAS_ADAPTER *ioc,
/* wait for an active reset in progress to complete */
mutex_lock(&ioc->reset_in_progress_mutex);
+ if (!mpt3sas_base_pci_device_is_available(ioc)) {
+ pr_err(MPT3SAS_FMT
+ "%s: pci error recovery reset or"
+ " pci device unplug occurred\n",
+ ioc->name, __func__);
+ if (!pci_device_is_present(ioc->pdev))
+ ioc->schedule_dead_ioc_flush_running_cmds(ioc);
+ r = 0;
+ mutex_unlock(&ioc->reset_in_progress_mutex);
+ goto out_unlocked;
+ }
+
+ mpt3sas_halt_firmware(ioc);
+
spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
ioc->shost_recovery = 1;
spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
@@ -1474,7 +1474,7 @@ void mpt3sas_base_update_missing_delay(struct MPT3SAS_ADAPTER *ioc,
u16 device_missing_delay, u8 io_missing_delay);
int mpt3sas_port_enable(struct MPT3SAS_ADAPTER *ioc);
-
+u8 mpt3sas_base_pci_device_is_available(struct MPT3SAS_ADAPTER *ioc);
void
mpt3sas_wait_for_commands_to_complete(struct MPT3SAS_ADAPTER *ioc);
@@ -2846,9 +2846,19 @@ scsih_abort(struct scsi_cmnd *scmd)
"attempting task abort! scmd(%p)\n", scmd);
_scsih_tm_display_info(ioc, scmd);
+ if (!pci_device_is_present(ioc->pdev) || ioc->remove_host) {
+ sdev_printk(KERN_INFO, scmd->device, "%s scmd(%p)\n",
+ ((ioc->remove_host) ? ("shost is getting removed!") :
+ ("pci device been removed!")), scmd);
+ if (st && st->smid)
+ mpt3sas_base_free_smid(ioc, st->smid);
+ scmd->result = DID_NO_CONNECT << 16;
+ r = FAST_IO_FAIL;
+ goto out;
+ }
+
sas_device_priv_data = scmd->device->hostdata;
- if (!sas_device_priv_data || !sas_device_priv_data->sas_target ||
- ioc->remove_host) {
+ if (!sas_device_priv_data || !sas_device_priv_data->sas_target) {
sdev_printk(KERN_INFO, scmd->device,
"device been deleted! scmd(%p)\n", scmd);
scmd->result = DID_NO_CONNECT << 16;
@@ -2918,6 +2928,15 @@ scsih_dev_reset(struct scsi_cmnd *scmd)
"attempting device reset! scmd(%p)\n", scmd);
_scsih_tm_display_info(ioc, scmd);
+ if (!pci_device_is_present(ioc->pdev) || ioc->remove_host) {
+ sdev_printk(KERN_INFO, scmd->device, "%s scmd(%p)\n",
+ ((ioc->remove_host) ? ("shost is getting removed!") :
+ ("pci device been removed!")), scmd);
+ scmd->result = DID_NO_CONNECT << 16;
+ r = FAST_IO_FAIL;
+ goto out;
+ }
+
sas_device_priv_data = scmd->device->hostdata;
if (!sas_device_priv_data || !sas_device_priv_data->sas_target ||
ioc->remove_host) {
@@ -2995,9 +3014,17 @@ scsih_target_reset(struct scsi_cmnd *scmd)
scmd);
_scsih_tm_display_info(ioc, scmd);
+ if ((!pci_device_is_present(ioc->pdev)) || ioc->remove_host) {
+ sdev_printk(KERN_INFO, scmd->device, "%s scmd(%p)\n",
+ ((ioc->remove_host) ? ("shost is getting removed!") :
+ ("pci device been removed!")), scmd);
+ scmd->result = DID_NO_CONNECT << 16;
+ r = FAST_IO_FAIL;
+ goto out;
+ }
+
sas_device_priv_data = scmd->device->hostdata;
- if (!sas_device_priv_data || !sas_device_priv_data->sas_target ||
- ioc->remove_host) {
+ if (!sas_device_priv_data || !sas_device_priv_data->sas_target) {
starget_printk(KERN_INFO, starget, "target been deleted! scmd(%p)\n",
scmd);
scmd->result = DID_NO_CONNECT << 16;
@@ -4474,7 +4501,9 @@ _scsih_flush_running_cmds(struct MPT3SAS_ADAPTER *ioc)
st = scsi_cmd_priv(scmd);
mpt3sas_base_clear_st(ioc, st);
scsi_dma_unmap(scmd);
- if (ioc->pci_error_recovery || ioc->remove_host)
+
+ if ((!mpt3sas_base_pci_device_is_available(ioc))
+ || ioc->remove_host)
scmd->result = DID_NO_CONNECT << 16;
else
scmd->result = DID_RESET << 16;
@@ -9726,6 +9755,9 @@ _scsih_ir_shutdown(struct MPT3SAS_ADAPTER *ioc)
if (list_empty(&ioc->raid_device_list))
return;
+ if (!pci_device_is_present(ioc->pdev))
+ return;
+
mutex_lock(&ioc->scsih_cmds.mutex);
if (ioc->scsih_cmds.status != MPT3_CMD_NOT_USED) {
@@ -10247,6 +10279,14 @@ scsih_scan_finished(struct Scsi_Host *shost, unsigned long time)
{
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
+ if (!pci_device_is_present(ioc->pdev)) {
+ complete(&ioc->port_enable_cmds.done);
+ ioc->port_enable_cmds.status = MPT3_CMD_NOT_USED;
+ ioc->is_driver_loading = 0;
+ ioc->remove_host = 1;
+ return 1;
+ }
+
if (disable_discovery > 0) {
ioc->is_driver_loading = 0;
ioc->wait_for_discovery_to_complete = 0;