| Message ID | 20180913180545.29756-1-manivannan.sadhasivam@linaro.org (mailing list archive) |
|---|---|
| Headers | show |
| Series | Add 96Boards Rock960 CE board support | expand |
On Thu, 2018-09-13 at 23:35 +0530, Manivannan Sadhasivam wrote: > This patchset adds 96Boards Rock960 CE board support. Rock960 CE > (Consumer Edition) board is one of the member of 96Boards Consumer > Edition and AI platform and is manufactured by Vamrs Limited. Most of > the board configuration is shared with the Ficus board manufactured by > vamrs, which is an Enterprise 96Board. > > For the sake of avoiding code duplication, a common rock960.dtsi file > with common DT nodes for both boards and separate board specific DTS > files has been added. > > To be specific, below are some of the key differences between both > boards: > > 1. Different host enable GPIO for USB > 2. Different power and reset GPIO for PCI-E > 3. No Ethernet port on Rock960 > > While adding the board support, SD card Chip detection support is also > added to the common dtsi file, shared by both boards. > > This series has been tested on Rock960 CE v1.2 board. > > Thanks, > Mani > > Changes in v3: > > * Moved usb and pcie nodes to common dtsi and kept only the properties > which differ in board specific dts. > * Updated the common dtsi commit description. > > Changes in v2: > > * Changed the board compatible to "vamrs,rock960" > > Manivannan Sadhasivam (4): > arm64: dts: rockchip: Split out common nodes for Rock960 based boards > dt-bindings: arm: rockchip: Add binding for Rock960 board > arm64: boot: dts: rockchip: Add support for Rock960 board > arm64: dts: rockchip: Enable SD card detection for Rock960 boards > > .../devicetree/bindings/arm/rockchip.txt | 4 + > arch/arm64/boot/dts/rockchip/Makefile | 1 + > arch/arm64/boot/dts/rockchip/rk3399-ficus.dts | 524 +---------------- > .../boot/dts/rockchip/rk3399-rock960.dts | 52 ++ > .../boot/dts/rockchip/rk3399-rock960.dtsi | 542 ++++++++++++++++++ > 5 files changed, 604 insertions(+), 519 deletions(-) > create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-rock960.dts > create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi > Looks pretty good! When applying this series, I noticed that it conflicts with commit 8bb878cf20ae10809c36db96993bfce7026d062b Author: Levin Du <djw@t-chip.com.cn> Date: Mon Jul 30 10:12:01 2018 +0800 arm64: dts: rockchip: add support for ROC-RK3399-PC board resolution is trivial, but you might want to rebase and resend, to make Heiko's life easier. Thanks, Eze
Am Freitag, 14. September 2018, 19:42:51 CEST schrieb Ezequiel Garcia: > On Thu, 2018-09-13 at 23:35 +0530, Manivannan Sadhasivam wrote: > > This patchset adds 96Boards Rock960 CE board support. Rock960 CE > > (Consumer Edition) board is one of the member of 96Boards Consumer > > Edition and AI platform and is manufactured by Vamrs Limited. Most of > > the board configuration is shared with the Ficus board manufactured by > > vamrs, which is an Enterprise 96Board. > > > > For the sake of avoiding code duplication, a common rock960.dtsi file > > with common DT nodes for both boards and separate board specific DTS > > files has been added. > > > > To be specific, below are some of the key differences between both > > boards: > > > > 1. Different host enable GPIO for USB > > 2. Different power and reset GPIO for PCI-E > > 3. No Ethernet port on Rock960 > > > > While adding the board support, SD card Chip detection support is also > > added to the common dtsi file, shared by both boards. > > > > This series has been tested on Rock960 CE v1.2 board. > > > > Thanks, > > Mani > > > > Changes in v3: > > > > * Moved usb and pcie nodes to common dtsi and kept only the properties > > which differ in board specific dts. > > * Updated the common dtsi commit description. > > > > Changes in v2: > > > > * Changed the board compatible to "vamrs,rock960" > > > > Manivannan Sadhasivam (4): > > arm64: dts: rockchip: Split out common nodes for Rock960 based boards > > dt-bindings: arm: rockchip: Add binding for Rock960 board > > arm64: boot: dts: rockchip: Add support for Rock960 board > > arm64: dts: rockchip: Enable SD card detection for Rock960 boards > > > > .../devicetree/bindings/arm/rockchip.txt | 4 + > > arch/arm64/boot/dts/rockchip/Makefile | 1 + > > arch/arm64/boot/dts/rockchip/rk3399-ficus.dts | 524 +---------------- > > .../boot/dts/rockchip/rk3399-rock960.dts | 52 ++ > > .../boot/dts/rockchip/rk3399-rock960.dtsi | 542 ++++++++++++++++++ > > 5 files changed, 604 insertions(+), 519 deletions(-) > > create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-rock960.dts > > create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi > > > > Looks pretty good! > > When applying this series, I noticed that it conflicts with > > commit 8bb878cf20ae10809c36db96993bfce7026d062b > Author: Levin Du <djw@t-chip.com.cn> > Date: Mon Jul 30 10:12:01 2018 +0800 > > arm64: dts: rockchip: add support for ROC-RK3399-PC board > > resolution is trivial, but you might want to rebase and resend, > to make Heiko's life easier. nah, that's ok as it is ;-) Such a Makefile conflict I can fix up myself. As it looks pretty good, I'd like to just give Rob a chance to look at the added binding before applying.
Am Donnerstag, 13. September 2018, 20:05:41 CEST schrieb Manivannan Sadhasivam: > This patchset adds 96Boards Rock960 CE board support. Rock960 CE > (Consumer Edition) board is one of the member of 96Boards Consumer > Edition and AI platform and is manufactured by Vamrs Limited. Most of > the board configuration is shared with the Ficus board manufactured by > vamrs, which is an Enterprise 96Board. > > For the sake of avoiding code duplication, a common rock960.dtsi file > with common DT nodes for both boards and separate board specific DTS > files has been added. > > To be specific, below are some of the key differences between both > boards: > > 1. Different host enable GPIO for USB > 2. Different power and reset GPIO for PCI-E > 3. No Ethernet port on Rock960 > > While adding the board support, SD card Chip detection support is also > added to the common dtsi file, shared by both boards. > > This series has been tested on Rock960 CE v1.2 board. > > Thanks, > Mani > > Changes in v3: > > * Moved usb and pcie nodes to common dtsi and kept only the properties > which differ in board specific dts. > * Updated the common dtsi commit description. > > Changes in v2: > > * Changed the board compatible to "vamrs,rock960" > > Manivannan Sadhasivam (4): > arm64: dts: rockchip: Split out common nodes for Rock960 based boards > dt-bindings: arm: rockchip: Add binding for Rock960 board > arm64: boot: dts: rockchip: Add support for Rock960 board > arm64: dts: rockchip: Enable SD card detection for Rock960 boards applied all 4 for 4.20, after fixing the subject of patch3 (-boot:) and adapting to recent Makefile changes as pointed out by Ezequiel. Heiko