Message ID | 20180904101719.18049-2-vivek.gautam@codeaurora.org (mailing list archive) |
---|---|
State | Accepted |
Headers | show |
Series | scsi: ufs-qcom: Remove all direct calls to qcom-ufs phy | expand |
On Tue 04 Sep 03:17 PDT 2018, Vivek Gautam wrote: > Remove ufs_qcom_phy_enable/(disable)_dev_ref_clk() that > are not being used by any code. > > Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Thanks for the ping Vivek, I didn't spot these when you posted them. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Regards, Bjorn > --- > drivers/phy/qualcomm/phy-qcom-ufs.c | 50 ------------------------------------- > include/linux/phy/phy-qcom-ufs.h | 14 ----------- > 2 files changed, 64 deletions(-) > > diff --git a/drivers/phy/qualcomm/phy-qcom-ufs.c b/drivers/phy/qualcomm/phy-qcom-ufs.c > index c5493ea51282..f2979ccad00a 100644 > --- a/drivers/phy/qualcomm/phy-qcom-ufs.c > +++ b/drivers/phy/qualcomm/phy-qcom-ufs.c > @@ -431,56 +431,6 @@ static void ufs_qcom_phy_disable_ref_clk(struct ufs_qcom_phy *phy) > } > } > > -#define UFS_REF_CLK_EN (1 << 5) > - > -static void ufs_qcom_phy_dev_ref_clk_ctrl(struct phy *generic_phy, bool enable) > -{ > - struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy); > - > - if (phy->dev_ref_clk_ctrl_mmio && > - (enable ^ phy->is_dev_ref_clk_enabled)) { > - u32 temp = readl_relaxed(phy->dev_ref_clk_ctrl_mmio); > - > - if (enable) > - temp |= UFS_REF_CLK_EN; > - else > - temp &= ~UFS_REF_CLK_EN; > - > - /* > - * If we are here to disable this clock immediately after > - * entering into hibern8, we need to make sure that device > - * ref_clk is active atleast 1us after the hibern8 enter. > - */ > - if (!enable) > - udelay(1); > - > - writel_relaxed(temp, phy->dev_ref_clk_ctrl_mmio); > - /* ensure that ref_clk is enabled/disabled before we return */ > - wmb(); > - /* > - * If we call hibern8 exit after this, we need to make sure that > - * device ref_clk is stable for atleast 1us before the hibern8 > - * exit command. > - */ > - if (enable) > - udelay(1); > - > - phy->is_dev_ref_clk_enabled = enable; > - } > -} > - > -void ufs_qcom_phy_enable_dev_ref_clk(struct phy *generic_phy) > -{ > - ufs_qcom_phy_dev_ref_clk_ctrl(generic_phy, true); > -} > -EXPORT_SYMBOL_GPL(ufs_qcom_phy_enable_dev_ref_clk); > - > -void ufs_qcom_phy_disable_dev_ref_clk(struct phy *generic_phy) > -{ > - ufs_qcom_phy_dev_ref_clk_ctrl(generic_phy, false); > -} > -EXPORT_SYMBOL_GPL(ufs_qcom_phy_disable_dev_ref_clk); > - > /* Turn ON M-PHY RMMI interface clocks */ > static int ufs_qcom_phy_enable_iface_clk(struct ufs_qcom_phy *phy) > { > diff --git a/include/linux/phy/phy-qcom-ufs.h b/include/linux/phy/phy-qcom-ufs.h > index 0a2c18a9771d..9dd85071bcce 100644 > --- a/include/linux/phy/phy-qcom-ufs.h > +++ b/include/linux/phy/phy-qcom-ufs.h > @@ -17,20 +17,6 @@ > > #include "phy.h" > > -/** > - * ufs_qcom_phy_enable_dev_ref_clk() - Enable the device > - * ref clock. > - * @phy: reference to a generic phy. > - */ > -void ufs_qcom_phy_enable_dev_ref_clk(struct phy *phy); > - > -/** > - * ufs_qcom_phy_disable_dev_ref_clk() - Disable the device > - * ref clock. > - * @phy: reference to a generic phy. > - */ > -void ufs_qcom_phy_disable_dev_ref_clk(struct phy *phy); > - > int ufs_qcom_phy_set_tx_lane_enable(struct phy *phy, u32 tx_lanes); > void ufs_qcom_phy_save_controller_version(struct phy *phy, > u8 major, u16 minor, u16 step); > -- > QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member > of Code Aurora Forum, hosted by The Linux Foundation >
On 9/24/2018 10:53 PM, Bjorn Andersson wrote: > On Tue 04 Sep 03:17 PDT 2018, Vivek Gautam wrote: > >> Remove ufs_qcom_phy_enable/(disable)_dev_ref_clk() that >> are not being used by any code. >> >> Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> > Thanks for the ping Vivek, I didn't spot these when you posted them. > > Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Thanks for reviewing the series, Bjorn. Best regards Vivek > > Regards, > Bjorn > >> --- >> drivers/phy/qualcomm/phy-qcom-ufs.c | 50 ------------------------------------- >> include/linux/phy/phy-qcom-ufs.h | 14 ----------- >> 2 files changed, 64 deletions(-) >> >> diff --git a/drivers/phy/qualcomm/phy-qcom-ufs.c b/drivers/phy/qualcomm/phy-qcom-ufs.c >> index c5493ea51282..f2979ccad00a 100644 >> --- a/drivers/phy/qualcomm/phy-qcom-ufs.c >> +++ b/drivers/phy/qualcomm/phy-qcom-ufs.c >> @@ -431,56 +431,6 @@ static void ufs_qcom_phy_disable_ref_clk(struct ufs_qcom_phy *phy) >> } >> } >> >> -#define UFS_REF_CLK_EN (1 << 5) >> - >> -static void ufs_qcom_phy_dev_ref_clk_ctrl(struct phy *generic_phy, bool enable) >> -{ >> - struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy); >> - >> - if (phy->dev_ref_clk_ctrl_mmio && >> - (enable ^ phy->is_dev_ref_clk_enabled)) { >> - u32 temp = readl_relaxed(phy->dev_ref_clk_ctrl_mmio); >> - >> - if (enable) >> - temp |= UFS_REF_CLK_EN; >> - else >> - temp &= ~UFS_REF_CLK_EN; >> - >> - /* >> - * If we are here to disable this clock immediately after >> - * entering into hibern8, we need to make sure that device >> - * ref_clk is active atleast 1us after the hibern8 enter. >> - */ >> - if (!enable) >> - udelay(1); >> - >> - writel_relaxed(temp, phy->dev_ref_clk_ctrl_mmio); >> - /* ensure that ref_clk is enabled/disabled before we return */ >> - wmb(); >> - /* >> - * If we call hibern8 exit after this, we need to make sure that >> - * device ref_clk is stable for atleast 1us before the hibern8 >> - * exit command. >> - */ >> - if (enable) >> - udelay(1); >> - >> - phy->is_dev_ref_clk_enabled = enable; >> - } >> -} >> - >> -void ufs_qcom_phy_enable_dev_ref_clk(struct phy *generic_phy) >> -{ >> - ufs_qcom_phy_dev_ref_clk_ctrl(generic_phy, true); >> -} >> -EXPORT_SYMBOL_GPL(ufs_qcom_phy_enable_dev_ref_clk); >> - >> -void ufs_qcom_phy_disable_dev_ref_clk(struct phy *generic_phy) >> -{ >> - ufs_qcom_phy_dev_ref_clk_ctrl(generic_phy, false); >> -} >> -EXPORT_SYMBOL_GPL(ufs_qcom_phy_disable_dev_ref_clk); >> - >> /* Turn ON M-PHY RMMI interface clocks */ >> static int ufs_qcom_phy_enable_iface_clk(struct ufs_qcom_phy *phy) >> { >> diff --git a/include/linux/phy/phy-qcom-ufs.h b/include/linux/phy/phy-qcom-ufs.h >> index 0a2c18a9771d..9dd85071bcce 100644 >> --- a/include/linux/phy/phy-qcom-ufs.h >> +++ b/include/linux/phy/phy-qcom-ufs.h >> @@ -17,20 +17,6 @@ >> >> #include "phy.h" >> >> -/** >> - * ufs_qcom_phy_enable_dev_ref_clk() - Enable the device >> - * ref clock. >> - * @phy: reference to a generic phy. >> - */ >> -void ufs_qcom_phy_enable_dev_ref_clk(struct phy *phy); >> - >> -/** >> - * ufs_qcom_phy_disable_dev_ref_clk() - Disable the device >> - * ref clock. >> - * @phy: reference to a generic phy. >> - */ >> -void ufs_qcom_phy_disable_dev_ref_clk(struct phy *phy); >> - >> int ufs_qcom_phy_set_tx_lane_enable(struct phy *phy, u32 tx_lanes); >> void ufs_qcom_phy_save_controller_version(struct phy *phy, >> u8 major, u16 minor, u16 step); >> -- >> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member >> of Code Aurora Forum, hosted by The Linux Foundation >>
diff --git a/drivers/phy/qualcomm/phy-qcom-ufs.c b/drivers/phy/qualcomm/phy-qcom-ufs.c index c5493ea51282..f2979ccad00a 100644 --- a/drivers/phy/qualcomm/phy-qcom-ufs.c +++ b/drivers/phy/qualcomm/phy-qcom-ufs.c @@ -431,56 +431,6 @@ static void ufs_qcom_phy_disable_ref_clk(struct ufs_qcom_phy *phy) } } -#define UFS_REF_CLK_EN (1 << 5) - -static void ufs_qcom_phy_dev_ref_clk_ctrl(struct phy *generic_phy, bool enable) -{ - struct ufs_qcom_phy *phy = get_ufs_qcom_phy(generic_phy); - - if (phy->dev_ref_clk_ctrl_mmio && - (enable ^ phy->is_dev_ref_clk_enabled)) { - u32 temp = readl_relaxed(phy->dev_ref_clk_ctrl_mmio); - - if (enable) - temp |= UFS_REF_CLK_EN; - else - temp &= ~UFS_REF_CLK_EN; - - /* - * If we are here to disable this clock immediately after - * entering into hibern8, we need to make sure that device - * ref_clk is active atleast 1us after the hibern8 enter. - */ - if (!enable) - udelay(1); - - writel_relaxed(temp, phy->dev_ref_clk_ctrl_mmio); - /* ensure that ref_clk is enabled/disabled before we return */ - wmb(); - /* - * If we call hibern8 exit after this, we need to make sure that - * device ref_clk is stable for atleast 1us before the hibern8 - * exit command. - */ - if (enable) - udelay(1); - - phy->is_dev_ref_clk_enabled = enable; - } -} - -void ufs_qcom_phy_enable_dev_ref_clk(struct phy *generic_phy) -{ - ufs_qcom_phy_dev_ref_clk_ctrl(generic_phy, true); -} -EXPORT_SYMBOL_GPL(ufs_qcom_phy_enable_dev_ref_clk); - -void ufs_qcom_phy_disable_dev_ref_clk(struct phy *generic_phy) -{ - ufs_qcom_phy_dev_ref_clk_ctrl(generic_phy, false); -} -EXPORT_SYMBOL_GPL(ufs_qcom_phy_disable_dev_ref_clk); - /* Turn ON M-PHY RMMI interface clocks */ static int ufs_qcom_phy_enable_iface_clk(struct ufs_qcom_phy *phy) { diff --git a/include/linux/phy/phy-qcom-ufs.h b/include/linux/phy/phy-qcom-ufs.h index 0a2c18a9771d..9dd85071bcce 100644 --- a/include/linux/phy/phy-qcom-ufs.h +++ b/include/linux/phy/phy-qcom-ufs.h @@ -17,20 +17,6 @@ #include "phy.h" -/** - * ufs_qcom_phy_enable_dev_ref_clk() - Enable the device - * ref clock. - * @phy: reference to a generic phy. - */ -void ufs_qcom_phy_enable_dev_ref_clk(struct phy *phy); - -/** - * ufs_qcom_phy_disable_dev_ref_clk() - Disable the device - * ref clock. - * @phy: reference to a generic phy. - */ -void ufs_qcom_phy_disable_dev_ref_clk(struct phy *phy); - int ufs_qcom_phy_set_tx_lane_enable(struct phy *phy, u32 tx_lanes); void ufs_qcom_phy_save_controller_version(struct phy *phy, u8 major, u16 minor, u16 step);
Remove ufs_qcom_phy_enable/(disable)_dev_ref_clk() that are not being used by any code. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> --- drivers/phy/qualcomm/phy-qcom-ufs.c | 50 ------------------------------------- include/linux/phy/phy-qcom-ufs.h | 14 ----------- 2 files changed, 64 deletions(-)