diff mbox series

[v4,10/21] tpm: factor out tpm 1.x pm suspend flow into tpm1-cmd.c

Message ID 20180921135820.20549-11-tomas.winkler@intel.com (mailing list archive)
State New, archived
Headers show
Series tpm: separate tpm 1.x and tpm 2.x commands | expand

Commit Message

Winkler, Tomas Sept. 21, 2018, 1:58 p.m. UTC 
Factor out TPM 1.x suspend flow from tpm-interface.c into a new function
tpm1_pm_suspend() in tpm1-cmd.c

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
---
V2-V3: Rebase
V4: 1. Add kdoc for tpm1_pm_suspend().
    2. Fix commit message.

 drivers/char/tpm/tpm-interface.c | 55 ++++---------------------------------
 drivers/char/tpm/tpm.h           |  1 +
 drivers/char/tpm/tpm1-cmd.c      | 59 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 65 insertions(+), 50 deletions(-)

Comments

Jarkko Sakkinen Sept. 25, 2018, 2:31 p.m. UTC | #1 
On Fri, 2018-09-21 at 16:58 +0300, Tomas Winkler wrote:
> Factor out TPM 1.x suspend flow from tpm-interface.c into a new function
> tpm1_pm_suspend() in tpm1-cmd.c
> 
> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
> ---
> V2-V3: Rebase
> V4: 1. Add kdoc for tpm1_pm_suspend().
>     2. Fix commit message.
> 
>  drivers/char/tpm/tpm-interface.c | 55 ++++---------------------------------
>  drivers/char/tpm/tpm.h           |  1 +
>  drivers/char/tpm/tpm1-cmd.c      | 59
> ++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 65 insertions(+), 50 deletions(-)
> 
> diff --git a/drivers/char/tpm/tpm-interface.c b/drivers/char/tpm/tpm-
> interface.c
> index 7239ccc16e2f..dfa972bbdd81 100644
> --- a/drivers/char/tpm/tpm-interface.c
> +++ b/drivers/char/tpm/tpm-interface.c
> @@ -585,15 +585,6 @@ int tpm_send(struct tpm_chip *chip, void *cmd, size_t
> buflen)
>  }
>  EXPORT_SYMBOL_GPL(tpm_send);
>  
> -#define TPM_ORD_SAVESTATE 152
> -#define SAVESTATE_RESULT_SIZE 10
> -
> -static const struct tpm_input_header savestate_header = {
> -	.tag = cpu_to_be16(TPM_TAG_RQU_COMMAND),
> -	.length = cpu_to_be32(10),
> -	.ordinal = cpu_to_be32(TPM_ORD_SAVESTATE)
> -};
> -
>  /*
>   * We are about to suspend. Save the TPM state
>   * so that it can be restored.
> @@ -601,54 +592,18 @@ static const struct tpm_input_header savestate_header =
> {
>  int tpm_pm_suspend(struct device *dev)
>  {
>  	struct tpm_chip *chip = dev_get_drvdata(dev);
> -	struct tpm_cmd_t cmd;
> -	int rc, try;
> -
> -	u8 dummy_hash[TPM_DIGEST_SIZE] = { 0 };
> +	int rc = 0;
>  
> -	if (chip == NULL)
> +	if (!chip)
>  		return -ENODEV;
>  
>  	if (chip->flags & TPM_CHIP_FLAG_ALWAYS_POWERED)
>  		return 0;
>  
> -	if (chip->flags & TPM_CHIP_FLAG_TPM2) {
> +	if (chip->flags & TPM_CHIP_FLAG_TPM2)
>  		tpm2_shutdown(chip, TPM2_SU_STATE);
> -		return 0;
> -	}
> -
> -	/* for buggy tpm, flush pcrs with extend to selected dummy */
> -	if (tpm_suspend_pcr)
> -		rc = tpm1_pcr_extend(chip, tpm_suspend_pcr, dummy_hash,
> -				     "extending dummy pcr before suspend");
> -
> -	/* now do the actual savestate */
> -	for (try = 0; try < TPM_RETRY; try++) {
> -		cmd.header.in = savestate_header;
> -		rc = tpm_transmit_cmd(chip, NULL, &cmd,
> SAVESTATE_RESULT_SIZE,
> -				      0, 0, NULL);
> -
> -		/*
> -		 * If the TPM indicates that it is too busy to respond to
> -		 * this command then retry before giving up.  It can take
> -		 * several seconds for this TPM to be ready.
> -		 *
> -		 * This can happen if the TPM has already been sent the
> -		 * SaveState command before the driver has loaded.  TCG 1.2
> -		 * specification states that any communication after
> SaveState
> -		 * may cause the TPM to invalidate previously saved state.
> -		 */
> -		if (rc != TPM_WARN_RETRY)
> -			break;
> -		tpm_msleep(TPM_TIMEOUT_RETRY);
> -	}
> -
> -	if (rc)
> -		dev_err(&chip->dev,
> -			"Error (%d) sending savestate before suspend\n", rc);
> -	else if (try > 0)
> -		dev_warn(&chip->dev, "TPM savestate took %dms\n",
> -			 try * TPM_TIMEOUT_RETRY);
> +	else
> +		rc = tpm1_pm_suspend(chip, tpm_suspend_pcr);
>  
>  	return rc;
>  }
> diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h
> index fd945fc828b6..862c9262e037 100644
> --- a/drivers/char/tpm/tpm.h
> +++ b/drivers/char/tpm/tpm.h
> @@ -543,6 +543,7 @@ ssize_t tpm_transmit_cmd(struct tpm_chip *chip, struct
> tpm_space *space,
>  int tpm_startup(struct tpm_chip *chip);
>  int tpm_get_timeouts(struct tpm_chip *);
>  
> +int tpm1_pm_suspend(struct tpm_chip *chip, int tpm_suspend_pcr);
>  int tpm1_do_selftest(struct tpm_chip *chip);
>  int tpm1_auto_startup(struct tpm_chip *chip);
>  int tpm1_get_timeouts(struct tpm_chip *chip);
> diff --git a/drivers/char/tpm/tpm1-cmd.c b/drivers/char/tpm/tpm1-cmd.c
> index 8ecda2cd3734..d118adbcd2a7 100644
> --- a/drivers/char/tpm/tpm1-cmd.c
> +++ b/drivers/char/tpm/tpm1-cmd.c
> @@ -667,3 +667,62 @@ int tpm1_auto_startup(struct tpm_chip *chip)
>  		rc = -ENODEV;
>  	return rc;
>  }
> +
> +#define TPM_ORD_SAVESTATE 152
> +#define SAVESTATE_RESULT_SIZE 10
> +static const struct tpm_input_header savestate_header = {
> +	.tag = cpu_to_be16(TPM_TAG_RQU_COMMAND),
> +	.length = cpu_to_be32(10),
> +	.ordinal = cpu_to_be32(TPM_ORD_SAVESTATE)
> +};
> +
> +/**
> + * tpm1_pm_suspend() - pm suspend handler
> + *    The functions saves the TPM state to be restored on resume.
> + *
> + * @chip:    TPM chip to use.
> + * @tpm_suspend_pcr: flush pcr for buggy TPM chips.
> + *
> + * Return: 0 on success, < 0 on error.
> + */
> +int tpm1_pm_suspend(struct tpm_chip *chip, int tpm_suspend_pcr)
> +{
> +	u8 dummy_hash[TPM_DIGEST_SIZE] = { 0 };
> +	struct tpm_cmd_t cmd;
> +	int rc, try;
> +
> +	/* for buggy tpm, flush pcrs with extend to selected dummy */
> +	if (tpm_suspend_pcr)
> +		rc = tpm1_pcr_extend(chip, tpm_suspend_pcr, dummy_hash,
> +				     "extending dummy pcr before suspend");
> +
> +	/* now do the actual savestate */
> +	for (try = 0; try < TPM_RETRY; try++) {
> +		cmd.header.in = savestate_header;
> +		rc = tpm_transmit_cmd(chip, NULL, &cmd,
> SAVESTATE_RESULT_SIZE,
> +				      0, 0, NULL);
> +
> +		/*
> +		 * If the TPM indicates that it is too busy to respond to
> +		 * this command then retry before giving up.  It can take
> +		 * several seconds for this TPM to be ready.
> +		 *
> +		 * This can happen if the TPM has already been sent the
> +		 * SaveState command before the driver has loaded.  TCG 1.2
> +		 * specification states that any communication after
> SaveState
> +		 * may cause the TPM to invalidate previously saved state.
> +		 */
> +		if (rc != TPM_WARN_RETRY)
> +			break;
> +		tpm_msleep(TPM_TIMEOUT_RETRY);
> +	}
> +
> +	if (rc)
> +		dev_err(&chip->dev, "Error (%d) sending savestate before
> suspend\n",
> +			rc);
> +	else if (try > 0)
> +		dev_warn(&chip->dev, "TPM savestate took %dms\n",
> +			 try * TPM_TIMEOUT_RETRY);
> +
> +	return rc;
> +}

Again, looks otherwise good except for the heading comment.

/Jarkko
diff mbox series

Patch

diff --git a/drivers/char/tpm/tpm-interface.c b/drivers/char/tpm/tpm-interface.c
index 7239ccc16e2f..dfa972bbdd81 100644
--- a/drivers/char/tpm/tpm-interface.c
+++ b/drivers/char/tpm/tpm-interface.c
@@ -585,15 +585,6 @@  int tpm_send(struct tpm_chip *chip, void *cmd, size_t buflen)
 }
 EXPORT_SYMBOL_GPL(tpm_send);
 
-#define TPM_ORD_SAVESTATE 152
-#define SAVESTATE_RESULT_SIZE 10
-
-static const struct tpm_input_header savestate_header = {
-	.tag = cpu_to_be16(TPM_TAG_RQU_COMMAND),
-	.length = cpu_to_be32(10),
-	.ordinal = cpu_to_be32(TPM_ORD_SAVESTATE)
-};
-
 /*
  * We are about to suspend. Save the TPM state
  * so that it can be restored.
@@ -601,54 +592,18 @@  static const struct tpm_input_header savestate_header = {
 int tpm_pm_suspend(struct device *dev)
 {
 	struct tpm_chip *chip = dev_get_drvdata(dev);
-	struct tpm_cmd_t cmd;
-	int rc, try;
-
-	u8 dummy_hash[TPM_DIGEST_SIZE] = { 0 };
+	int rc = 0;
 
-	if (chip == NULL)
+	if (!chip)
 		return -ENODEV;
 
 	if (chip->flags & TPM_CHIP_FLAG_ALWAYS_POWERED)
 		return 0;
 
-	if (chip->flags & TPM_CHIP_FLAG_TPM2) {
+	if (chip->flags & TPM_CHIP_FLAG_TPM2)
 		tpm2_shutdown(chip, TPM2_SU_STATE);
-		return 0;
-	}
-
-	/* for buggy tpm, flush pcrs with extend to selected dummy */
-	if (tpm_suspend_pcr)
-		rc = tpm1_pcr_extend(chip, tpm_suspend_pcr, dummy_hash,
-				     "extending dummy pcr before suspend");
-
-	/* now do the actual savestate */
-	for (try = 0; try < TPM_RETRY; try++) {
-		cmd.header.in = savestate_header;
-		rc = tpm_transmit_cmd(chip, NULL, &cmd, SAVESTATE_RESULT_SIZE,
-				      0, 0, NULL);
-
-		/*
-		 * If the TPM indicates that it is too busy to respond to
-		 * this command then retry before giving up.  It can take
-		 * several seconds for this TPM to be ready.
-		 *
-		 * This can happen if the TPM has already been sent the
-		 * SaveState command before the driver has loaded.  TCG 1.2
-		 * specification states that any communication after SaveState
-		 * may cause the TPM to invalidate previously saved state.
-		 */
-		if (rc != TPM_WARN_RETRY)
-			break;
-		tpm_msleep(TPM_TIMEOUT_RETRY);
-	}
-
-	if (rc)
-		dev_err(&chip->dev,
-			"Error (%d) sending savestate before suspend\n", rc);
-	else if (try > 0)
-		dev_warn(&chip->dev, "TPM savestate took %dms\n",
-			 try * TPM_TIMEOUT_RETRY);
+	else
+		rc = tpm1_pm_suspend(chip, tpm_suspend_pcr);
 
 	return rc;
 }
diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h
index fd945fc828b6..862c9262e037 100644
--- a/drivers/char/tpm/tpm.h
+++ b/drivers/char/tpm/tpm.h
@@ -543,6 +543,7 @@  ssize_t tpm_transmit_cmd(struct tpm_chip *chip, struct tpm_space *space,
 int tpm_startup(struct tpm_chip *chip);
 int tpm_get_timeouts(struct tpm_chip *);
 
+int tpm1_pm_suspend(struct tpm_chip *chip, int tpm_suspend_pcr);
 int tpm1_do_selftest(struct tpm_chip *chip);
 int tpm1_auto_startup(struct tpm_chip *chip);
 int tpm1_get_timeouts(struct tpm_chip *chip);
diff --git a/drivers/char/tpm/tpm1-cmd.c b/drivers/char/tpm/tpm1-cmd.c
index 8ecda2cd3734..d118adbcd2a7 100644
--- a/drivers/char/tpm/tpm1-cmd.c
+++ b/drivers/char/tpm/tpm1-cmd.c
@@ -667,3 +667,62 @@  int tpm1_auto_startup(struct tpm_chip *chip)
 		rc = -ENODEV;
 	return rc;
 }
+
+#define TPM_ORD_SAVESTATE 152
+#define SAVESTATE_RESULT_SIZE 10
+static const struct tpm_input_header savestate_header = {
+	.tag = cpu_to_be16(TPM_TAG_RQU_COMMAND),
+	.length = cpu_to_be32(10),
+	.ordinal = cpu_to_be32(TPM_ORD_SAVESTATE)
+};
+
+/**
+ * tpm1_pm_suspend() - pm suspend handler
+ *    The functions saves the TPM state to be restored on resume.
+ *
+ * @chip:    TPM chip to use.
+ * @tpm_suspend_pcr: flush pcr for buggy TPM chips.
+ *
+ * Return: 0 on success, < 0 on error.
+ */
+int tpm1_pm_suspend(struct tpm_chip *chip, int tpm_suspend_pcr)
+{
+	u8 dummy_hash[TPM_DIGEST_SIZE] = { 0 };
+	struct tpm_cmd_t cmd;
+	int rc, try;
+
+	/* for buggy tpm, flush pcrs with extend to selected dummy */
+	if (tpm_suspend_pcr)
+		rc = tpm1_pcr_extend(chip, tpm_suspend_pcr, dummy_hash,
+				     "extending dummy pcr before suspend");
+
+	/* now do the actual savestate */
+	for (try = 0; try < TPM_RETRY; try++) {
+		cmd.header.in = savestate_header;
+		rc = tpm_transmit_cmd(chip, NULL, &cmd, SAVESTATE_RESULT_SIZE,
+				      0, 0, NULL);
+
+		/*
+		 * If the TPM indicates that it is too busy to respond to
+		 * this command then retry before giving up.  It can take
+		 * several seconds for this TPM to be ready.
+		 *
+		 * This can happen if the TPM has already been sent the
+		 * SaveState command before the driver has loaded.  TCG 1.2
+		 * specification states that any communication after SaveState
+		 * may cause the TPM to invalidate previously saved state.
+		 */
+		if (rc != TPM_WARN_RETRY)
+			break;
+		tpm_msleep(TPM_TIMEOUT_RETRY);
+	}
+
+	if (rc)
+		dev_err(&chip->dev, "Error (%d) sending savestate before suspend\n",
+			rc);
+	else if (try > 0)
+		dev_warn(&chip->dev, "TPM savestate took %dms\n",
+			 try * TPM_TIMEOUT_RETRY);
+
+	return rc;
+}