| Message ID | 20180907041948.19913-5-wens@csie.org (mailing list archive) |
|---|---|
| State | Mainlined, archived |
| Headers | show |
| Series | drm/sun4i: Support color dithering for LCD panels | expand |
On Fri, 7 Sep 2018 12:19:46 +0800, Chen-Yu Tsai wrote: > This panel is marketed as Banana Pi 7" LCD display. On the back is > a sticker denoting the model name S070WV20-CT16. > > This is a 7" 800x480 panel connected through a 24-bit RGB interface. > However the panel only does 262k colors. > > Depending on the variant, the PCB attached to the panel module either > supports DSI, or DSI + 24-bit RGB. DSI is converted to 24-bit RGB via > an onboard ICN6211 MIPI DSI - RGB bridge chip, then fed to the panel > itself. > > Signed-off-by: Chen-Yu Tsai <wens@csie.org> > --- > .../display/panel/bananapi,s070wv20-ct16.txt | 12 +++++++++ > drivers/gpu/drm/panel/panel-simple.c | 25 +++++++++++++++++++ > 2 files changed, 37 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt > Reviewed-by: Rob Herring <robh@kernel.org>
On Fri, Sep 07, 2018 at 12:19:46PM +0800, Chen-Yu Tsai wrote: > This panel is marketed as Banana Pi 7" LCD display. On the back is > a sticker denoting the model name S070WV20-CT16. > > This is a 7" 800x480 panel connected through a 24-bit RGB interface. > However the panel only does 262k colors. > > Depending on the variant, the PCB attached to the panel module either > supports DSI, or DSI + 24-bit RGB. DSI is converted to 24-bit RGB via > an onboard ICN6211 MIPI DSI - RGB bridge chip, then fed to the panel > itself. > > Signed-off-by: Chen-Yu Tsai <wens@csie.org> > --- > .../display/panel/bananapi,s070wv20-ct16.txt | 12 +++++++++ > drivers/gpu/drm/panel/panel-simple.c | 25 +++++++++++++++++++ > 2 files changed, 37 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt Next time, please make the bindings and driver changes separate patches. Applied, thanks. Thierry
diff --git a/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt new file mode 100644 index 000000000000..35bc0c839f49 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt @@ -0,0 +1,12 @@ +Banana Pi 7" (S070WV20-CT16) TFT LCD Panel + +Required properties: +- compatible: should be "bananapi,s070wv20-ct16" +- power-supply: see ./panel-common.txt + +Optional properties: +- enable-gpios: see ./simple-panel.txt +- backlight: see ./simple-panel.txt + +This binding is compatible with the simple-panel binding, which is specified +in ./simple-panel.txt. diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index 97964f7f2ace..52d6ac572825 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -772,6 +772,28 @@ static const struct panel_desc avic_tm070ddh03 = { }, }; +static const struct drm_display_mode bananapi_s070wv20_ct16_mode = { + .clock = 30000, + .hdisplay = 800, + .hsync_start = 800 + 40, + .hsync_end = 800 + 40 + 48, + .htotal = 800 + 40 + 48 + 40, + .vdisplay = 480, + .vsync_start = 480 + 13, + .vsync_end = 480 + 13 + 3, + .vtotal = 480 + 13 + 3 + 29, +}; + +static const struct panel_desc bananapi_s070wv20_ct16 = { + .modes = &bananapi_s070wv20_ct16_mode, + .num_modes = 1, + .bpc = 6, + .size = { + .width = 154, + .height = 86, + }, +}; + static const struct drm_display_mode boe_hv070wsa_mode = { .clock = 40800, .hdisplay = 1024, @@ -2369,6 +2391,9 @@ static const struct of_device_id platform_of_match[] = { }, { .compatible = "avic,tm070ddh03", .data = &avic_tm070ddh03, + }, { + .compatible = "bananapi,s070wv20-ct16", + .data = &bananapi_s070wv20_ct16, }, { .compatible = "boe,hv070wsa-100", .data = &boe_hv070wsa
This panel is marketed as Banana Pi 7" LCD display. On the back is a sticker denoting the model name S070WV20-CT16. This is a 7" 800x480 panel connected through a 24-bit RGB interface. However the panel only does 262k colors. Depending on the variant, the PCB attached to the panel module either supports DSI, or DSI + 24-bit RGB. DSI is converted to 24-bit RGB via an onboard ICN6211 MIPI DSI - RGB bridge chip, then fed to the panel itself. Signed-off-by: Chen-Yu Tsai <wens@csie.org> --- .../display/panel/bananapi,s070wv20-ct16.txt | 12 +++++++++ drivers/gpu/drm/panel/panel-simple.c | 25 +++++++++++++++++++ 2 files changed, 37 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/bananapi,s070wv20-ct16.txt