| Message ID | 1536650820-16076-2-git-send-email-pierre-yves.mordret@st.com (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Headers | show |
| Series | Add-DMA-MDMA-chaining-support | expand |
On Tue, Sep 11, 2018 at 09:26:54AM +0200, Pierre-Yves MORDRET wrote: > This patch adds dma bindings to support DMA/MDMA chaining transfer. > 1 bit is to manage both DMA FIFO Threshold > 1 bit is to manage DMA/MDMA Chaining features. > 2 bits are used to specify SDRAM size to use for DMA/MDMA chaining. > The size in bytes of a certain order is given by the formula: > (2 ^ order) * PAGE_SIZE. > The order is given by those 2 bits. > For cyclic, whether chaining is chosen, any value above 1 can be set : > SRAM buffer size will rely on period size and not on this DT value. > > Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> > --- > Version history: > v1: > * Initial > --- > --- > .../devicetree/bindings/dma/stm32-dma.txt | 32 +++++++++++++++++++--- > 1 file changed, 28 insertions(+), 4 deletions(-) > > diff --git a/Documentation/devicetree/bindings/dma/stm32-dma.txt b/Documentation/devicetree/bindings/dma/stm32-dma.txt > index c5f5190..163be09 100644 > --- a/Documentation/devicetree/bindings/dma/stm32-dma.txt > +++ b/Documentation/devicetree/bindings/dma/stm32-dma.txt > @@ -17,6 +17,12 @@ Optional properties: > - resets: Reference to a reset controller asserting the DMA controller > - st,mem2mem: boolean; if defined, it indicates that the controller supports > memory-to-memory transfer > +- dmas: A list of eight dma specifiers, one for each entry in dma-names. > + Refer to stm32-mdma.txt for more details. > +- dma-names: should contain "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6" and > + "ch7" and represents each STM32 DMA channel connected to a STM32 MDMA one. > +- memory-region : phandle to a node describing memory to be used for > + M2M intermediate transfer between DMA and MDMA. > > Example: > > @@ -36,6 +42,16 @@ Example: > st,mem2mem; > resets = <&rcc 150>; > dma-requests = <8>; > + dmas = <&mdma1 8 0x10 0x1200000a 0x40026408 0x00000020 1>, > + <&mdma1 9 0x10 0x1200000a 0x40026408 0x00000800 1>, > + <&mdma1 10 0x10 0x1200000a 0x40026408 0x00200000 1>, > + <&mdma1 11 0x10 0x1200000a 0x40026408 0x08000000 1>, > + <&mdma1 12 0x10 0x1200000a 0x4002640C 0x00000020 1>, > + <&mdma1 13 0x10 0x1200000a 0x4002640C 0x00000800 1>, > + <&mdma1 14 0x10 0x1200000a 0x4002640C 0x00200000 1>, > + <&mdma1 15 0x10 0x1200000a 0x4002640C 0x08000000 1>; > + dma-names = "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7"; > + memory-region = <&sram_dmapool>; > }; > > * DMA client > @@ -62,13 +78,21 @@ channel: a phandle to the DMA controller plus the following four integer cells: > 0x1: medium > 0x2: high > 0x3: very high > -4. A 32bit bitfield value specifying DMA features which are device dependent: > +4. A bitfield value specifying DMA features which are device dependent: It's still a 32-bit value, right? > -bit 0-1: DMA FIFO threshold selection > 0x0: 1/4 full FIFO > 0x1: 1/2 full FIFO > 0x2: 3/4 full FIFO > 0x3: full FIFO > - > + -bit 2: Intermediate M2M transfer from/to DDR to/from SRAM throughout MDMA > + 0: MDMA not used to generate an intermediate M2M transfer > + 1: MDMA used to generate an intermediate M2M transfer. > + -bit 3-4: indicated SRAM Buffer size in (2^order)*PAGE_SIZE. What's PAGE_SIZE? That's not defined for DT. > + Order is given by those 2 bits starting at 0. > + Valid only whether Intermediate M2M transfer is set. > + For cyclic, whether Intermediate M2M transfer is chosen, any value can > + be set: SRAM buffer size will rely on period size and not on this DT > + value. > > Example: > > @@ -77,7 +101,7 @@ Example: > reg = <0x40011000 0x400>; > interrupts = <37>; > clocks = <&clk_pclk2>; > - dmas = <&dma2 2 4 0x10400 0x3>, > - <&dma2 7 5 0x10200 0x3>; > + dmas = <&dma2 2 4 0x10400 0x1>, > + <&dma2 7 5 0x10200 0x1>; > dma-names = "rx", "tx"; > }; > -- > 2.7.4 >
diff --git a/Documentation/devicetree/bindings/dma/stm32-dma.txt b/Documentation/devicetree/bindings/dma/stm32-dma.txt index c5f5190..163be09 100644 --- a/Documentation/devicetree/bindings/dma/stm32-dma.txt +++ b/Documentation/devicetree/bindings/dma/stm32-dma.txt @@ -17,6 +17,12 @@ Optional properties: - resets: Reference to a reset controller asserting the DMA controller - st,mem2mem: boolean; if defined, it indicates that the controller supports memory-to-memory transfer +- dmas: A list of eight dma specifiers, one for each entry in dma-names. + Refer to stm32-mdma.txt for more details. +- dma-names: should contain "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6" and + "ch7" and represents each STM32 DMA channel connected to a STM32 MDMA one. +- memory-region : phandle to a node describing memory to be used for + M2M intermediate transfer between DMA and MDMA. Example: @@ -36,6 +42,16 @@ Example: st,mem2mem; resets = <&rcc 150>; dma-requests = <8>; + dmas = <&mdma1 8 0x10 0x1200000a 0x40026408 0x00000020 1>, + <&mdma1 9 0x10 0x1200000a 0x40026408 0x00000800 1>, + <&mdma1 10 0x10 0x1200000a 0x40026408 0x00200000 1>, + <&mdma1 11 0x10 0x1200000a 0x40026408 0x08000000 1>, + <&mdma1 12 0x10 0x1200000a 0x4002640C 0x00000020 1>, + <&mdma1 13 0x10 0x1200000a 0x4002640C 0x00000800 1>, + <&mdma1 14 0x10 0x1200000a 0x4002640C 0x00200000 1>, + <&mdma1 15 0x10 0x1200000a 0x4002640C 0x08000000 1>; + dma-names = "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7"; + memory-region = <&sram_dmapool>; }; * DMA client @@ -62,13 +78,21 @@ channel: a phandle to the DMA controller plus the following four integer cells: 0x1: medium 0x2: high 0x3: very high -4. A 32bit bitfield value specifying DMA features which are device dependent: +4. A bitfield value specifying DMA features which are device dependent: -bit 0-1: DMA FIFO threshold selection 0x0: 1/4 full FIFO 0x1: 1/2 full FIFO 0x2: 3/4 full FIFO 0x3: full FIFO - + -bit 2: Intermediate M2M transfer from/to DDR to/from SRAM throughout MDMA + 0: MDMA not used to generate an intermediate M2M transfer + 1: MDMA used to generate an intermediate M2M transfer. + -bit 3-4: indicated SRAM Buffer size in (2^order)*PAGE_SIZE. + Order is given by those 2 bits starting at 0. + Valid only whether Intermediate M2M transfer is set. + For cyclic, whether Intermediate M2M transfer is chosen, any value can + be set: SRAM buffer size will rely on period size and not on this DT + value. Example: @@ -77,7 +101,7 @@ Example: reg = <0x40011000 0x400>; interrupts = <37>; clocks = <&clk_pclk2>; - dmas = <&dma2 2 4 0x10400 0x3>, - <&dma2 7 5 0x10200 0x3>; + dmas = <&dma2 2 4 0x10400 0x1>, + <&dma2 7 5 0x10200 0x1>; dma-names = "rx", "tx"; };
This patch adds dma bindings to support DMA/MDMA chaining transfer. 1 bit is to manage both DMA FIFO Threshold 1 bit is to manage DMA/MDMA Chaining features. 2 bits are used to specify SDRAM size to use for DMA/MDMA chaining. The size in bytes of a certain order is given by the formula: (2 ^ order) * PAGE_SIZE. The order is given by those 2 bits. For cyclic, whether chaining is chosen, any value above 1 can be set : SRAM buffer size will rely on period size and not on this DT value. Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> --- Version history: v1: * Initial --- --- .../devicetree/bindings/dma/stm32-dma.txt | 32 +++++++++++++++++++--- 1 file changed, 28 insertions(+), 4 deletions(-)