| Message ID | 1537433449-65213-2-git-send-email-jianxin.pan@amlogic.com (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Headers | show |
| Series | mtd: rawnand: meson: add Amlogic NAND driver support | expand |
On Thu, Sep 20, 2018 at 04:50:48PM +0800, Jianxin Pan wrote: > From: Liang Yang <liang.yang@amlogic.com> > > Add Amlogic NAND controller dt-bindings for Meson SoC, > Current this driver support GXBB/GXL/AXG platform. > > Signed-off-by: Liang Yang <liang.yang@amlogic.com> > Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> > --- > .../devicetree/bindings/mtd/amlogic,meson-nand.txt | 60 ++++++++++++++++++++++ > 1 file changed, 60 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt > > diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt > new file mode 100644 > index 0000000..803df2a > --- /dev/null > +++ b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt > @@ -0,0 +1,60 @@ > +Amlogic NAND Flash Controller (NFC) for GXBB/GXL/AXG family SoCs > + > +This file documents the properties in addition to those available in > +the MTD NAND bindings. > + > +Required properties: > +- compatible : contains one of: > + - "amlogic,meson-gxl-nfc" > + - "amlogic,meson-axg-nfc" > +- clocks : > + A list of phandle + clock-specifier pairs for the clocks listed > + in clock-names. > + > +- clock-names: Should contain the following: > + "core" - NFC module gate clock > + "device" - device clock from eMMC sub clock controller > + > +- amlogic,mmc-syscon : Required for NAND clocks, it's shared with SD/eMMC > + controller port C > + > +Optional children nodes: > +Children nodes represent the available nand chips. > + > +Other properties: > +see Documentation/devicetree/bindings/mtd/nand.txt for generic bindings. > + > +Example demonstrate on AXG SoC: > + > + sd_emmc_c_clkc: mmc@7000 { > + compatible = "amlogic,meson-axg-mmc-clkc", "syscon"; > + reg = <0x0 0x7000 0x0 0x800>; > + status = "okay"; > + }; > + > + nand: nfc@7800 { nand-controller@7800 > + compatible = "amlogic,meson-axg-nfc"; > + reg = <0x0 0x7800 0x0 0x100>; > + #address-cells = <1>; > + #size-cells = <0>; > + interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>; > + status = "disabled"; > + > + clocks = <&clkc CLKID_SD_EMMC_C>, > + <&sd_emmc_c_clkc CLKID_MMC_DIV>; > + clock-names = "core", "device"; > + amlogic,mmc-syscon = <&sd_emmc_c_clkc>; > + > + status = "okay"; Don't show status in examples, plus you have it twice. > + > + pinctrl-names = "default"; > + pinctrl-0 = <&nand_pins>; > + > + nand@0 { > + reg = <0>; > + #address-cells = <1>; > + #size-cells = <1>; > + > + nand-on-flash-bbt; > + }; > + }; > -- > 1.9.1 >
On 9/28/2018 2:16 AM, Rob Herring wrote: > On Thu, Sep 20, 2018 at 04:50:48PM +0800, Jianxin Pan wrote: >> From: Liang Yang <liang.yang@amlogic.com> >> >> Add Amlogic NAND controller dt-bindings for Meson SoC, >> Current this driver support GXBB/GXL/AXG platform. >> >> Signed-off-by: Liang Yang <liang.yang@amlogic.com> >> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> >> --- >> .../devicetree/bindings/mtd/amlogic,meson-nand.txt | 60 ++++++++++++++++++++++ >> 1 file changed, 60 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt >> >> diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt >> new file mode 100644 >> index 0000000..803df2a >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt >> @@ -0,0 +1,60 @@ >> +Amlogic NAND Flash Controller (NFC) for GXBB/GXL/AXG family SoCs >> + >> +This file documents the properties in addition to those available in >> +the MTD NAND bindings. >> + >> +Required properties: >> +- compatible : contains one of: >> + - "amlogic,meson-gxl-nfc" >> + - "amlogic,meson-axg-nfc" >> +- clocks : >> + A list of phandle + clock-specifier pairs for the clocks listed >> + in clock-names. >> + >> +- clock-names: Should contain the following: >> + "core" - NFC module gate clock >> + "device" - device clock from eMMC sub clock controller >> + >> +- amlogic,mmc-syscon : Required for NAND clocks, it's shared with SD/eMMC >> + controller port C >> + >> +Optional children nodes: >> +Children nodes represent the available nand chips. >> + >> +Other properties: >> +see Documentation/devicetree/bindings/mtd/nand.txt for generic bindings. >> + >> +Example demonstrate on AXG SoC: >> + >> + sd_emmc_c_clkc: mmc@7000 { >> + compatible = "amlogic,meson-axg-mmc-clkc", "syscon"; >> + reg = <0x0 0x7000 0x0 0x800>; >> + status = "okay"; >> + }; >> + >> + nand: nfc@7800 { > > nand-controller@7800 > ok, i will fix it. >> + compatible = "amlogic,meson-axg-nfc"; >> + reg = <0x0 0x7800 0x0 0x100>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>; >> + status = "disabled"; >> + >> + clocks = <&clkc CLKID_SD_EMMC_C>, >> + <&sd_emmc_c_clkc CLKID_MMC_DIV>; >> + clock-names = "core", "device"; >> + amlogic,mmc-syscon = <&sd_emmc_c_clkc>; >> + >> + status = "okay"; > > Don't show status in examples, plus you have it twice. > ok, i will fix it. >> + >> + pinctrl-names = "default"; >> + pinctrl-0 = <&nand_pins>; >> + >> + nand@0 { >> + reg = <0>; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + >> + nand-on-flash-bbt; >> + }; >> + }; >> -- >> 1.9.1 >> > > . >
diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt new file mode 100644 index 0000000..803df2a --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt @@ -0,0 +1,60 @@ +Amlogic NAND Flash Controller (NFC) for GXBB/GXL/AXG family SoCs + +This file documents the properties in addition to those available in +the MTD NAND bindings. + +Required properties: +- compatible : contains one of: + - "amlogic,meson-gxl-nfc" + - "amlogic,meson-axg-nfc" +- clocks : + A list of phandle + clock-specifier pairs for the clocks listed + in clock-names. + +- clock-names: Should contain the following: + "core" - NFC module gate clock + "device" - device clock from eMMC sub clock controller + +- amlogic,mmc-syscon : Required for NAND clocks, it's shared with SD/eMMC + controller port C + +Optional children nodes: +Children nodes represent the available nand chips. + +Other properties: +see Documentation/devicetree/bindings/mtd/nand.txt for generic bindings. + +Example demonstrate on AXG SoC: + + sd_emmc_c_clkc: mmc@7000 { + compatible = "amlogic,meson-axg-mmc-clkc", "syscon"; + reg = <0x0 0x7000 0x0 0x800>; + status = "okay"; + }; + + nand: nfc@7800 { + compatible = "amlogic,meson-axg-nfc"; + reg = <0x0 0x7800 0x0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + + clocks = <&clkc CLKID_SD_EMMC_C>, + <&sd_emmc_c_clkc CLKID_MMC_DIV>; + clock-names = "core", "device"; + amlogic,mmc-syscon = <&sd_emmc_c_clkc>; + + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&nand_pins>; + + nand@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + + nand-on-flash-bbt; + }; + };