| Message ID | 20181001202748.8030-3-jae.hyun.yoo@linux.intel.com (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Headers | show |
| Series | i2c: aspeed: Add bus idle waiting logic for multi-master use cases | expand |
Hello Jae, On Mon, 1 Oct 2018 at 22:28, Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> wrote: > > This commit adds reading code of the 'timeout' DT property to set > bus timeout value in adapter configuration. This value still > can be configured through an I2C_TIMEOUT ioctl on cdev too. > > Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> > --- > drivers/i2c/busses/i2c-aspeed.c | 8 +++++++- > 1 file changed, 7 insertions(+), 1 deletion(-) > > diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c > index 8dc9161ced38..6d31f54a6653 100644 > --- a/drivers/i2c/busses/i2c-aspeed.c > +++ b/drivers/i2c/busses/i2c-aspeed.c > @@ -885,6 +885,7 @@ static int aspeed_i2c_probe_bus(struct platform_device *pdev) > struct clk *parent_clk; > struct resource *res; > int irq, ret; > + u32 timeout_ms; > > bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL); > if (!bus) > @@ -918,6 +919,11 @@ static int aspeed_i2c_probe_bus(struct platform_device *pdev) > bus->bus_frequency = 100000; > } > > + ret = of_property_read_u32(pdev->dev.of_node, "timeout", > + &timeout_ms); > + if (ret) > + timeout_ms = 0; /* then adap.timeout will be set by i2c-core */ Is it possible to implement the parsing of this property in the i2c core instead?
Hi Joel, On 10/3/2018 12:49 AM, Joel Stanley wrote: > Hello Jae, > > On Mon, 1 Oct 2018 at 22:28, Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> wrote: >> @@ -918,6 +919,11 @@ static int aspeed_i2c_probe_bus(struct platform_device *pdev) >> bus->bus_frequency = 100000; >> } >> >> + ret = of_property_read_u32(pdev->dev.of_node, "timeout", >> + &timeout_ms); >> + if (ret) >> + timeout_ms = 0; /* then adap.timeout will be set by i2c-core */ > > Is it possible to implement the parsing of this property in the i2c > core instead? > Yes, that's possible but I'm not sure that could be acceptable or not. Let me try. Thanks, Jae
diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c index 8dc9161ced38..6d31f54a6653 100644 --- a/drivers/i2c/busses/i2c-aspeed.c +++ b/drivers/i2c/busses/i2c-aspeed.c @@ -885,6 +885,7 @@ static int aspeed_i2c_probe_bus(struct platform_device *pdev) struct clk *parent_clk; struct resource *res; int irq, ret; + u32 timeout_ms; bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL); if (!bus) @@ -918,6 +919,11 @@ static int aspeed_i2c_probe_bus(struct platform_device *pdev) bus->bus_frequency = 100000; } + ret = of_property_read_u32(pdev->dev.of_node, "timeout", + &timeout_ms); + if (ret) + timeout_ms = 0; /* then adap.timeout will be set by i2c-core */ + match = of_match_node(aspeed_i2c_bus_of_table, pdev->dev.of_node); if (!match) bus->get_clk_reg_val = aspeed_i2c_24xx_get_clk_reg_val; @@ -930,7 +936,7 @@ static int aspeed_i2c_probe_bus(struct platform_device *pdev) init_completion(&bus->cmd_complete); bus->adap.owner = THIS_MODULE; bus->adap.retries = 0; - bus->adap.timeout = 5 * HZ; + bus->adap.timeout = timeout_ms ? msecs_to_jiffies(timeout_ms) : 0; bus->adap.algo = &aspeed_i2c_algo; bus->adap.dev.parent = &pdev->dev; bus->adap.dev.of_node = pdev->dev.of_node;
This commit adds reading code of the 'timeout' DT property to set bus timeout value in adapter configuration. This value still can be configured through an I2C_TIMEOUT ioctl on cdev too. Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> --- drivers/i2c/busses/i2c-aspeed.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)