| Message ID | 20180927114850.24565-11-jagan@amarulasolutions.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | drm/sun4i: Allwinner A64 MIPI-DSI support | expand |
On Thu, Sep 27, 2018 at 7:50 PM Jagan Teki <jagan@amarulasolutions.com> wrote: > > Bananapi S070WV20-CT16 is 800x480, 4-lane MIPI-DSI panel which > can be used to connect via BPI-M64 board, so add a driver for it. > > The same panel PCB comes with parallel RBG which is supported via > panel-simple driver with "bananapi,s070wv20-ct16" compatible. As I mentioned before, this PCB uses a ICN6211 MIPI-DSI to RGB bridge. Please model it as such. > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > --- > drivers/gpu/drm/panel/Kconfig | 9 + > drivers/gpu/drm/panel/Makefile | 1 + > .../gpu/drm/panel/panel-bananapi-s070wv20.c | 336 ++++++++++++++++++ > 3 files changed, 346 insertions(+) > create mode 100644 drivers/gpu/drm/panel/panel-bananapi-s070wv20.c > > diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig > index 6020c30a33b3..d25960a63b10 100644 > --- a/drivers/gpu/drm/panel/Kconfig > +++ b/drivers/gpu/drm/panel/Kconfig > @@ -17,6 +17,15 @@ config DRM_PANEL_ARM_VERSATILE > reference designs. The panel is detected using special registers > in the Versatile family syscon registers. > > +config DRM_PANEL_BANANAPI_S070WV20 > + tristate "Bananapi S070WV20-CT16 MIPI-DSI panel driver" > + depends on OF > + depends on DRM_MIPI_DSI > + depends on BACKLIGHT_CLASS_DEVICE > + help > + Say Y if you want to enable support for panels based on the > + Bananapi S070WV20-CT16 MIPI-DSI controller. > + > config DRM_PANEL_LVDS > tristate "Generic LVDS panel driver" > depends on OF > diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile > index 5ccaaa9d13af..345b6475d3a4 100644 > --- a/drivers/gpu/drm/panel/Makefile > +++ b/drivers/gpu/drm/panel/Makefile > @@ -1,5 +1,6 @@ > # SPDX-License-Identifier: GPL-2.0 > obj-$(CONFIG_DRM_PANEL_ARM_VERSATILE) += panel-arm-versatile.o > +obj-$(CONFIG_DRM_PANEL_BANANAPI_S070WV20) += panel-bananapi-s070wv20.o > obj-$(CONFIG_DRM_PANEL_LVDS) += panel-lvds.o > obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o > obj-$(CONFIG_DRM_PANEL_ILITEK_IL9322) += panel-ilitek-ili9322.o > diff --git a/drivers/gpu/drm/panel/panel-bananapi-s070wv20.c b/drivers/gpu/drm/panel/panel-bananapi-s070wv20.c > new file mode 100644 > index 000000000000..6c9adbec6dd8 > --- /dev/null > +++ b/drivers/gpu/drm/panel/panel-bananapi-s070wv20.c > @@ -0,0 +1,336 @@ > +// SPDX-License-Identifier: (GPL-2.0+ or MIT) > +/* > + * Copyright (C) 2018 Amarula Solutions > + * Author: Jagan Teki <jagan@amarulasolutions.com> > + */ > + > +#include <linux/backlight.h> > +#include <linux/delay.h> > +#include <linux/device.h> > +#include <linux/err.h> > +#include <linux/errno.h> > +#include <linux/fb.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > + > +#include <linux/gpio/consumer.h> > +#include <linux/regulator/consumer.h> > + > +#include <drm/drm_mipi_dsi.h> > +#include <drm/drm_modes.h> > +#include <drm/drm_panel.h> > + > +#include <video/mipi_display.h> > + > +struct s070wv20 { > + struct drm_panel panel; > + struct mipi_dsi_device *dsi; > + > + struct backlight_device *backlight; > + struct regulator *dvdd; > + struct regulator *avdd; > + struct gpio_desc *reset; > + > + bool is_enabled; > + bool is_prepared; > +}; > + > +static inline struct s070wv20 *panel_to_s070wv20(struct drm_panel *panel) > +{ > + return container_of(panel, struct s070wv20, panel); > +} > + > +struct s070wv20_init_cmd { > + size_t len; > + const char *data; > +}; > + > +#define S070WV20_INIT_CMD(...) { \ > + .len = sizeof((char[]){__VA_ARGS__}), \ > + .data = (char[]){__VA_ARGS__} } > + Using the timings from below, and comparing with https://shiminblog.github.io/mipi-to-rgb-lcd/ > +static const struct s070wv20_init_cmd s070wv20_init_cmds[] = { > + S070WV20_INIT_CMD(0x7A, 0xC1), > + S070WV20_INIT_CMD(0x20, 0x20), This is likely the lower 8 bits of .hdisplay. > + S070WV20_INIT_CMD(0x21, 0xE0), Lower 8 bits of .vdisplay > + S070WV20_INIT_CMD(0x22, 0x13), Might be ((.hdisplay >> 8) & 0xf | (.vdisplay >> 8) & 0xf) << 4). > + S070WV20_INIT_CMD(0x23, 0x28), HFP, or horizontal front porch. 40 in this case. > + S070WV20_INIT_CMD(0x24, 0x30), HSYNC, or horizontal sync pulse length. 48 in this case. > + S070WV20_INIT_CMD(0x25, 0x28), HBP, or horizontal back porch. 40 in this case. > + S070WV20_INIT_CMD(0x26, 0x00), Unknown. Possibly RGB phase shift? > + S070WV20_INIT_CMD(0x27, 0x0D), VFP, or vertical front porch. 13 in this case. > + S070WV20_INIT_CMD(0x28, 0x03), This might be VSYNC, judging from the grouping. 3 in this case. > + S070WV20_INIT_CMD(0x29, 0x1D), VBP, or vertical back porch. 29 in this case. > + S070WV20_INIT_CMD(0x34, 0x80), > + S070WV20_INIT_CMD(0x36, 0x28), > + S070WV20_INIT_CMD(0xB5, 0xA0), > + S070WV20_INIT_CMD(0x5C, 0xFF), > + S070WV20_INIT_CMD(0x2A, 0x01), > + S070WV20_INIT_CMD(0x56, 0x92), > + S070WV20_INIT_CMD(0x6B, 0x71), > + S070WV20_INIT_CMD(0x69, 0x2B), > + S070WV20_INIT_CMD(0x10, 0x40), > + S070WV20_INIT_CMD(0x11, 0x98), This might be related to number of MIPI lanes. I saw 0x88 for 2-lane devices. > + S070WV20_INIT_CMD(0xB6, 0x20), > + S070WV20_INIT_CMD(0x51, 0x20), > + S070WV20_INIT_CMD(0x09, 0x10), The last three seem standardized across all ICN6211 drivers I could find on github. Other drivers / init sequences I found: https://github.com/yesnoandor/x300/blob/master/kernel/arch/arm/boot/dts/erobbing/x300/x300.dtsi#L81 https://github.com/wxzed/Raspberry_5MIPI_Display/blob/master/I2C_Slave/USER/main.c#L15 https://github.com/eliot-shao/qcom/blob/master/icn6211_cxn0102/kernel/drivers/video/msm/mdss/mdss_i2c_interface.c#L152 matches timings for https://github.com/eliot-shao/qcom/blob/master/icn6211_cxn0102/kernel/arch/arm/boot/dts/qcom/dsi-mipi-2-rgb_1280p_video.dtsi#L20 https://github.com/zestroly/micromat/blob/master/test/raspberry/ICN6211.cpp#L169 I also reached out to Bananapi to see if they have more information on this chip. ChenYu > +}; > + > +static int s070wv20_prepare(struct drm_panel *panel) > +{ > + struct s070wv20 *ctx = panel_to_s070wv20(panel); > + struct mipi_dsi_device *dsi = ctx->dsi; > + unsigned int i; > + int ret; > + > + if (ctx->is_prepared) > + return 0; > + > + msleep(50); > + > + gpiod_set_value(ctx->reset, 1); > + msleep(50); > + > + gpiod_set_value(ctx->reset, 0); > + msleep(50); > + > + gpiod_set_value(ctx->reset, 1); > + msleep(20); > + > + ret = mipi_dsi_dcs_exit_sleep_mode(dsi); > + if (ret < 0) { > + dev_err(panel->dev, "failed to exit sleep mode: %d\n", ret); > + return ret; > + } > + > + msleep(120); > + > + for (i = 0; i < ARRAY_SIZE(s070wv20_init_cmds); i++) { > + const struct s070wv20_init_cmd *cmd = &s070wv20_init_cmds[i]; > + > + ret = mipi_dsi_generic_write(dsi, cmd->data, cmd->len); > + if (ret < 0) > + return ret; > + > + msleep(10); > + } > + > + ret = mipi_dsi_dcs_set_display_on(dsi); > + if (ret < 0) { > + dev_err(panel->dev, "failed to set display on: %d\n", ret); > + return ret; > + } > + > + ctx->is_prepared = true; > + > + return 0; > +} > + > +static int s070wv20_enable(struct drm_panel *panel) > +{ > + struct s070wv20 *ctx = panel_to_s070wv20(panel); > + > + if (ctx->is_enabled) > + return 0; > + > + msleep(120); > + > + backlight_enable(ctx->backlight); > + ctx->is_enabled = true; > + > + return 0; > +} > + > +static int s070wv20_disable(struct drm_panel *panel) > +{ > + struct s070wv20 *ctx = panel_to_s070wv20(panel); > + > + if (!ctx->is_enabled) > + return 0; > + > + backlight_disable(ctx->backlight); > + ctx->is_enabled = false; > + > + return 0; > +} > + > +static int s070wv20_unprepare(struct drm_panel *panel) > +{ > + struct s070wv20 *ctx = panel_to_s070wv20(panel); > + int ret; > + > + if (!ctx->is_prepared) > + return 0; > + > + ret = mipi_dsi_dcs_set_display_off(ctx->dsi); > + if (ret < 0) > + dev_err(panel->dev, "failed to set display off: %d\n", ret); > + > + ret = mipi_dsi_dcs_enter_sleep_mode(ctx->dsi); > + if (ret < 0) > + dev_err(panel->dev, "failed to enter sleep mode: %d\n", ret); > + > + msleep(100); > + > + regulator_disable(ctx->avdd); > + > + regulator_disable(ctx->dvdd); > + > + gpiod_set_value(ctx->reset, 0); > + > + gpiod_set_value(ctx->reset, 1); > + > + gpiod_set_value(ctx->reset, 0); > + > + ctx->is_prepared = false; > + > + return 0; > +} > + > +static const struct drm_display_mode s070wv20_default_mode = { > + .clock = 30000, > + .vrefresh = 60, > + > + .hdisplay = 800, > + .hsync_start = 800 + 40, > + .hsync_end = 800 + 40 + 48, > + .htotal = 800 + 40 + 48 + 40, > + > + .vdisplay = 480, > + .vsync_start = 480 + 13, > + .vsync_end = 480 + 13 + 3, > + .vtotal = 480 + 13 + 3 + 29, > +}; > + > +static int s070wv20_get_modes(struct drm_panel *panel) > +{ > + struct drm_connector *connector = panel->connector; > + struct s070wv20 *ctx = panel_to_s070wv20(panel); > + struct drm_display_mode *mode; > + > + mode = drm_mode_duplicate(panel->drm, &s070wv20_default_mode); > + if (!mode) { > + dev_err(&ctx->dsi->dev, "failed to add mode %ux%ux@%u\n", > + s070wv20_default_mode.hdisplay, > + s070wv20_default_mode.vdisplay, > + s070wv20_default_mode.vrefresh); > + return -ENOMEM; > + } > + > + drm_mode_set_name(mode); > + > + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; > + drm_mode_probed_add(connector, mode); > + > + panel->connector->display_info.width_mm = 86; > + panel->connector->display_info.height_mm = 154; > + > + return 1; > +} > + > +static const struct drm_panel_funcs s070wv20_funcs = { > + .disable = s070wv20_disable, > + .unprepare = s070wv20_unprepare, > + .prepare = s070wv20_prepare, > + .enable = s070wv20_enable, > + .get_modes = s070wv20_get_modes, > +}; > + > +static int s070wv20_dsi_probe(struct mipi_dsi_device *dsi) > +{ > + struct device_node *np; > + struct s070wv20 *ctx; > + int ret; > + > + ctx = devm_kzalloc(&dsi->dev, sizeof(*ctx), GFP_KERNEL); > + if (!ctx) > + return -ENOMEM; > + mipi_dsi_set_drvdata(dsi, ctx); > + ctx->dsi = dsi; > + > + drm_panel_init(&ctx->panel); > + ctx->panel.dev = &dsi->dev; > + ctx->panel.funcs = &s070wv20_funcs; > + > + ctx->dvdd = devm_regulator_get(&dsi->dev, "dvdd"); > + if (IS_ERR(ctx->dvdd)) { > + dev_err(&dsi->dev, "Couldn't get dvdd regulator\n"); > + return PTR_ERR(ctx->dvdd); > + } > + > + ctx->avdd = devm_regulator_get(&dsi->dev, "avdd"); > + if (IS_ERR(ctx->avdd)) { > + dev_err(&dsi->dev, "Couldn't get avdd regulator\n"); > + return PTR_ERR(ctx->avdd); > + } > + > + ret = regulator_enable(ctx->dvdd); > + if (ret) > + return ret; > + > + msleep(5); > + > + ret = regulator_enable(ctx->avdd); > + if (ret) > + return ret; > + > + msleep(5); > + > + ctx->reset = devm_gpiod_get(&dsi->dev, "reset", GPIOD_OUT_LOW); > + if (IS_ERR(ctx->reset)) { > + dev_err(&dsi->dev, "Couldn't get our reset GPIO\n"); > + return PTR_ERR(ctx->reset); > + } > + > + np = of_parse_phandle(dsi->dev.of_node, "backlight", 0); > + if (np) { > + ctx->backlight = of_find_backlight_by_node(np); > + of_node_put(np); > + > + if (!ctx->backlight) > + return -EPROBE_DEFER; > + } > + > + ret = drm_panel_add(&ctx->panel); > + if (ret < 0) > + return ret; > + > + dsi->mode_flags = MIPI_DSI_MODE_VIDEO_SYNC_PULSE; > + dsi->format = MIPI_DSI_FMT_RGB888; > + dsi->lanes = 4; > + > + return mipi_dsi_attach(dsi); > +} > + > +static int s070wv20_dsi_remove(struct mipi_dsi_device *dsi) > +{ > + struct s070wv20 *ctx = mipi_dsi_get_drvdata(dsi); > + > + mipi_dsi_detach(dsi); > + drm_panel_remove(&ctx->panel); > + > + if (ctx->backlight) > + put_device(&ctx->backlight->dev); > + > + return 0; > +} > + > +static const struct of_device_id s070wv20_of_match[] = { > + { .compatible = "bananapi,s070wv20-ct16-dsi", }, > + { } > +}; > +MODULE_DEVICE_TABLE(of, s070wv20_of_match); > + > +static struct mipi_dsi_driver s070wv20_driver = { > + .probe = s070wv20_dsi_probe, > + .remove = s070wv20_dsi_remove, > + .driver = { > + .name = "bananapi-s070wv20-ct16-dsi", > + .of_match_table = s070wv20_of_match, > + }, > +}; > +module_mipi_dsi_driver(s070wv20_driver); > + > +MODULE_AUTHOR("Jagan Teki <jagan@amarulasolutions.com>"); > +MODULE_DESCRIPTION("Bananapi S070WV20-CT16 MIPI-DSI"); > +MODULE_LICENSE("GPL v2"); > -- > 2.18.0.321.gffc6fa0e3 >
On Fri, Sep 28, 2018 at 10:02 AM Chen-Yu Tsai <wens@csie.org> wrote: > > On Thu, Sep 27, 2018 at 7:50 PM Jagan Teki <jagan@amarulasolutions.com> wrote: > > > > Bananapi S070WV20-CT16 is 800x480, 4-lane MIPI-DSI panel which > > can be used to connect via BPI-M64 board, so add a driver for it. > > > > The same panel PCB comes with parallel RBG which is supported via > > panel-simple driver with "bananapi,s070wv20-ct16" compatible. > > As I mentioned before, this PCB uses a ICN6211 MIPI-DSI to RGB bridge. > Please model it as such. OK. > > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > > --- > > drivers/gpu/drm/panel/Kconfig | 9 + > > drivers/gpu/drm/panel/Makefile | 1 + > > .../gpu/drm/panel/panel-bananapi-s070wv20.c | 336 ++++++++++++++++++ > > 3 files changed, 346 insertions(+) > > create mode 100644 drivers/gpu/drm/panel/panel-bananapi-s070wv20.c > > > > diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig > > index 6020c30a33b3..d25960a63b10 100644 > > --- a/drivers/gpu/drm/panel/Kconfig > > +++ b/drivers/gpu/drm/panel/Kconfig > > @@ -17,6 +17,15 @@ config DRM_PANEL_ARM_VERSATILE > > reference designs. The panel is detected using special registers > > in the Versatile family syscon registers. > > > > +config DRM_PANEL_BANANAPI_S070WV20 > > + tristate "Bananapi S070WV20-CT16 MIPI-DSI panel driver" > > + depends on OF > > + depends on DRM_MIPI_DSI > > + depends on BACKLIGHT_CLASS_DEVICE > > + help > > + Say Y if you want to enable support for panels based on the > > + Bananapi S070WV20-CT16 MIPI-DSI controller. > > + > > config DRM_PANEL_LVDS > > tristate "Generic LVDS panel driver" > > depends on OF > > diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile > > index 5ccaaa9d13af..345b6475d3a4 100644 > > --- a/drivers/gpu/drm/panel/Makefile > > +++ b/drivers/gpu/drm/panel/Makefile > > @@ -1,5 +1,6 @@ > > # SPDX-License-Identifier: GPL-2.0 > > obj-$(CONFIG_DRM_PANEL_ARM_VERSATILE) += panel-arm-versatile.o > > +obj-$(CONFIG_DRM_PANEL_BANANAPI_S070WV20) += panel-bananapi-s070wv20.o > > obj-$(CONFIG_DRM_PANEL_LVDS) += panel-lvds.o > > obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o > > obj-$(CONFIG_DRM_PANEL_ILITEK_IL9322) += panel-ilitek-ili9322.o > > diff --git a/drivers/gpu/drm/panel/panel-bananapi-s070wv20.c b/drivers/gpu/drm/panel/panel-bananapi-s070wv20.c > > new file mode 100644 > > index 000000000000..6c9adbec6dd8 > > --- /dev/null > > +++ b/drivers/gpu/drm/panel/panel-bananapi-s070wv20.c > > @@ -0,0 +1,336 @@ > > +// SPDX-License-Identifier: (GPL-2.0+ or MIT) > > +/* > > + * Copyright (C) 2018 Amarula Solutions > > + * Author: Jagan Teki <jagan@amarulasolutions.com> > > + */ > > + > > +#include <linux/backlight.h> > > +#include <linux/delay.h> > > +#include <linux/device.h> > > +#include <linux/err.h> > > +#include <linux/errno.h> > > +#include <linux/fb.h> > > +#include <linux/kernel.h> > > +#include <linux/module.h> > > + > > +#include <linux/gpio/consumer.h> > > +#include <linux/regulator/consumer.h> > > + > > +#include <drm/drm_mipi_dsi.h> > > +#include <drm/drm_modes.h> > > +#include <drm/drm_panel.h> > > + > > +#include <video/mipi_display.h> > > + > > +struct s070wv20 { > > + struct drm_panel panel; > > + struct mipi_dsi_device *dsi; > > + > > + struct backlight_device *backlight; > > + struct regulator *dvdd; > > + struct regulator *avdd; > > + struct gpio_desc *reset; > > + > > + bool is_enabled; > > + bool is_prepared; > > +}; > > + > > +static inline struct s070wv20 *panel_to_s070wv20(struct drm_panel *panel) > > +{ > > + return container_of(panel, struct s070wv20, panel); > > +} > > + > > +struct s070wv20_init_cmd { > > + size_t len; > > + const char *data; > > +}; > > + > > +#define S070WV20_INIT_CMD(...) { \ > > + .len = sizeof((char[]){__VA_ARGS__}), \ > > + .data = (char[]){__VA_ARGS__} } > > + > > Using the timings from below, and comparing with > > https://shiminblog.github.io/mipi-to-rgb-lcd/ > > > +static const struct s070wv20_init_cmd s070wv20_init_cmds[] = { > > + S070WV20_INIT_CMD(0x7A, 0xC1), > > > + S070WV20_INIT_CMD(0x20, 0x20), > > This is likely the lower 8 bits of .hdisplay. > > > + S070WV20_INIT_CMD(0x21, 0xE0), > > Lower 8 bits of .vdisplay > > > + S070WV20_INIT_CMD(0x22, 0x13), > > Might be ((.hdisplay >> 8) & 0xf | (.vdisplay >> 8) & 0xf) << 4). > > > + S070WV20_INIT_CMD(0x23, 0x28), > > HFP, or horizontal front porch. 40 in this case. > > > + S070WV20_INIT_CMD(0x24, 0x30), > > HSYNC, or horizontal sync pulse length. 48 in this case. > > > + S070WV20_INIT_CMD(0x25, 0x28), > > HBP, or horizontal back porch. 40 in this case. > > > + S070WV20_INIT_CMD(0x26, 0x00), > > Unknown. Possibly RGB phase shift? > > > + S070WV20_INIT_CMD(0x27, 0x0D), > > VFP, or vertical front porch. 13 in this case. > > > + S070WV20_INIT_CMD(0x28, 0x03), > > This might be VSYNC, judging from the grouping. 3 in this case. > > > + S070WV20_INIT_CMD(0x29, 0x1D), > > VBP, or vertical back porch. 29 in this case. > > > + S070WV20_INIT_CMD(0x34, 0x80), > > + S070WV20_INIT_CMD(0x36, 0x28), > > + S070WV20_INIT_CMD(0xB5, 0xA0), > > + S070WV20_INIT_CMD(0x5C, 0xFF), > > + S070WV20_INIT_CMD(0x2A, 0x01), > > + S070WV20_INIT_CMD(0x56, 0x92), > > + S070WV20_INIT_CMD(0x6B, 0x71), > > + S070WV20_INIT_CMD(0x69, 0x2B), > > + S070WV20_INIT_CMD(0x10, 0x40), > > + S070WV20_INIT_CMD(0x11, 0x98), > > This might be related to number of MIPI lanes. I saw 0x88 for 2-lane devices. > > > + S070WV20_INIT_CMD(0xB6, 0x20), > > + S070WV20_INIT_CMD(0x51, 0x20), > > + S070WV20_INIT_CMD(0x09, 0x10), > > The last three seem standardized across all ICN6211 drivers I could > find on github. > > Other drivers / init sequences I found: > > https://github.com/yesnoandor/x300/blob/master/kernel/arch/arm/boot/dts/erobbing/x300/x300.dtsi#L81 > https://github.com/wxzed/Raspberry_5MIPI_Display/blob/master/I2C_Slave/USER/main.c#L15 > > https://github.com/eliot-shao/qcom/blob/master/icn6211_cxn0102/kernel/drivers/video/msm/mdss/mdss_i2c_interface.c#L152 > matches timings for > https://github.com/eliot-shao/qcom/blob/master/icn6211_cxn0102/kernel/arch/arm/boot/dts/qcom/dsi-mipi-2-rgb_1280p_video.dtsi#L20 > > https://github.com/zestroly/micromat/blob/master/test/raspberry/ICN6211.cpp#L169 > > I also reached out to Bananapi to see if they have more information on > this chip. Did you get any further information from BPI?
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig index 6020c30a33b3..d25960a63b10 100644 --- a/drivers/gpu/drm/panel/Kconfig +++ b/drivers/gpu/drm/panel/Kconfig @@ -17,6 +17,15 @@ config DRM_PANEL_ARM_VERSATILE reference designs. The panel is detected using special registers in the Versatile family syscon registers. +config DRM_PANEL_BANANAPI_S070WV20 + tristate "Bananapi S070WV20-CT16 MIPI-DSI panel driver" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + help + Say Y if you want to enable support for panels based on the + Bananapi S070WV20-CT16 MIPI-DSI controller. + config DRM_PANEL_LVDS tristate "Generic LVDS panel driver" depends on OF diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile index 5ccaaa9d13af..345b6475d3a4 100644 --- a/drivers/gpu/drm/panel/Makefile +++ b/drivers/gpu/drm/panel/Makefile @@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 obj-$(CONFIG_DRM_PANEL_ARM_VERSATILE) += panel-arm-versatile.o +obj-$(CONFIG_DRM_PANEL_BANANAPI_S070WV20) += panel-bananapi-s070wv20.o obj-$(CONFIG_DRM_PANEL_LVDS) += panel-lvds.o obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o obj-$(CONFIG_DRM_PANEL_ILITEK_IL9322) += panel-ilitek-ili9322.o diff --git a/drivers/gpu/drm/panel/panel-bananapi-s070wv20.c b/drivers/gpu/drm/panel/panel-bananapi-s070wv20.c new file mode 100644 index 000000000000..6c9adbec6dd8 --- /dev/null +++ b/drivers/gpu/drm/panel/panel-bananapi-s070wv20.c @@ -0,0 +1,336 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +/* + * Copyright (C) 2018 Amarula Solutions + * Author: Jagan Teki <jagan@amarulasolutions.com> + */ + +#include <linux/backlight.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/errno.h> +#include <linux/fb.h> +#include <linux/kernel.h> +#include <linux/module.h> + +#include <linux/gpio/consumer.h> +#include <linux/regulator/consumer.h> + +#include <drm/drm_mipi_dsi.h> +#include <drm/drm_modes.h> +#include <drm/drm_panel.h> + +#include <video/mipi_display.h> + +struct s070wv20 { + struct drm_panel panel; + struct mipi_dsi_device *dsi; + + struct backlight_device *backlight; + struct regulator *dvdd; + struct regulator *avdd; + struct gpio_desc *reset; + + bool is_enabled; + bool is_prepared; +}; + +static inline struct s070wv20 *panel_to_s070wv20(struct drm_panel *panel) +{ + return container_of(panel, struct s070wv20, panel); +} + +struct s070wv20_init_cmd { + size_t len; + const char *data; +}; + +#define S070WV20_INIT_CMD(...) { \ + .len = sizeof((char[]){__VA_ARGS__}), \ + .data = (char[]){__VA_ARGS__} } + +static const struct s070wv20_init_cmd s070wv20_init_cmds[] = { + S070WV20_INIT_CMD(0x7A, 0xC1), + S070WV20_INIT_CMD(0x20, 0x20), + S070WV20_INIT_CMD(0x21, 0xE0), + S070WV20_INIT_CMD(0x22, 0x13), + S070WV20_INIT_CMD(0x23, 0x28), + S070WV20_INIT_CMD(0x24, 0x30), + S070WV20_INIT_CMD(0x25, 0x28), + S070WV20_INIT_CMD(0x26, 0x00), + S070WV20_INIT_CMD(0x27, 0x0D), + S070WV20_INIT_CMD(0x28, 0x03), + S070WV20_INIT_CMD(0x29, 0x1D), + S070WV20_INIT_CMD(0x34, 0x80), + S070WV20_INIT_CMD(0x36, 0x28), + S070WV20_INIT_CMD(0xB5, 0xA0), + S070WV20_INIT_CMD(0x5C, 0xFF), + S070WV20_INIT_CMD(0x2A, 0x01), + S070WV20_INIT_CMD(0x56, 0x92), + S070WV20_INIT_CMD(0x6B, 0x71), + S070WV20_INIT_CMD(0x69, 0x2B), + S070WV20_INIT_CMD(0x10, 0x40), + S070WV20_INIT_CMD(0x11, 0x98), + S070WV20_INIT_CMD(0xB6, 0x20), + S070WV20_INIT_CMD(0x51, 0x20), + S070WV20_INIT_CMD(0x09, 0x10), +}; + +static int s070wv20_prepare(struct drm_panel *panel) +{ + struct s070wv20 *ctx = panel_to_s070wv20(panel); + struct mipi_dsi_device *dsi = ctx->dsi; + unsigned int i; + int ret; + + if (ctx->is_prepared) + return 0; + + msleep(50); + + gpiod_set_value(ctx->reset, 1); + msleep(50); + + gpiod_set_value(ctx->reset, 0); + msleep(50); + + gpiod_set_value(ctx->reset, 1); + msleep(20); + + ret = mipi_dsi_dcs_exit_sleep_mode(dsi); + if (ret < 0) { + dev_err(panel->dev, "failed to exit sleep mode: %d\n", ret); + return ret; + } + + msleep(120); + + for (i = 0; i < ARRAY_SIZE(s070wv20_init_cmds); i++) { + const struct s070wv20_init_cmd *cmd = &s070wv20_init_cmds[i]; + + ret = mipi_dsi_generic_write(dsi, cmd->data, cmd->len); + if (ret < 0) + return ret; + + msleep(10); + } + + ret = mipi_dsi_dcs_set_display_on(dsi); + if (ret < 0) { + dev_err(panel->dev, "failed to set display on: %d\n", ret); + return ret; + } + + ctx->is_prepared = true; + + return 0; +} + +static int s070wv20_enable(struct drm_panel *panel) +{ + struct s070wv20 *ctx = panel_to_s070wv20(panel); + + if (ctx->is_enabled) + return 0; + + msleep(120); + + backlight_enable(ctx->backlight); + ctx->is_enabled = true; + + return 0; +} + +static int s070wv20_disable(struct drm_panel *panel) +{ + struct s070wv20 *ctx = panel_to_s070wv20(panel); + + if (!ctx->is_enabled) + return 0; + + backlight_disable(ctx->backlight); + ctx->is_enabled = false; + + return 0; +} + +static int s070wv20_unprepare(struct drm_panel *panel) +{ + struct s070wv20 *ctx = panel_to_s070wv20(panel); + int ret; + + if (!ctx->is_prepared) + return 0; + + ret = mipi_dsi_dcs_set_display_off(ctx->dsi); + if (ret < 0) + dev_err(panel->dev, "failed to set display off: %d\n", ret); + + ret = mipi_dsi_dcs_enter_sleep_mode(ctx->dsi); + if (ret < 0) + dev_err(panel->dev, "failed to enter sleep mode: %d\n", ret); + + msleep(100); + + regulator_disable(ctx->avdd); + + regulator_disable(ctx->dvdd); + + gpiod_set_value(ctx->reset, 0); + + gpiod_set_value(ctx->reset, 1); + + gpiod_set_value(ctx->reset, 0); + + ctx->is_prepared = false; + + return 0; +} + +static const struct drm_display_mode s070wv20_default_mode = { + .clock = 30000, + .vrefresh = 60, + + .hdisplay = 800, + .hsync_start = 800 + 40, + .hsync_end = 800 + 40 + 48, + .htotal = 800 + 40 + 48 + 40, + + .vdisplay = 480, + .vsync_start = 480 + 13, + .vsync_end = 480 + 13 + 3, + .vtotal = 480 + 13 + 3 + 29, +}; + +static int s070wv20_get_modes(struct drm_panel *panel) +{ + struct drm_connector *connector = panel->connector; + struct s070wv20 *ctx = panel_to_s070wv20(panel); + struct drm_display_mode *mode; + + mode = drm_mode_duplicate(panel->drm, &s070wv20_default_mode); + if (!mode) { + dev_err(&ctx->dsi->dev, "failed to add mode %ux%ux@%u\n", + s070wv20_default_mode.hdisplay, + s070wv20_default_mode.vdisplay, + s070wv20_default_mode.vrefresh); + return -ENOMEM; + } + + drm_mode_set_name(mode); + + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; + drm_mode_probed_add(connector, mode); + + panel->connector->display_info.width_mm = 86; + panel->connector->display_info.height_mm = 154; + + return 1; +} + +static const struct drm_panel_funcs s070wv20_funcs = { + .disable = s070wv20_disable, + .unprepare = s070wv20_unprepare, + .prepare = s070wv20_prepare, + .enable = s070wv20_enable, + .get_modes = s070wv20_get_modes, +}; + +static int s070wv20_dsi_probe(struct mipi_dsi_device *dsi) +{ + struct device_node *np; + struct s070wv20 *ctx; + int ret; + + ctx = devm_kzalloc(&dsi->dev, sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return -ENOMEM; + mipi_dsi_set_drvdata(dsi, ctx); + ctx->dsi = dsi; + + drm_panel_init(&ctx->panel); + ctx->panel.dev = &dsi->dev; + ctx->panel.funcs = &s070wv20_funcs; + + ctx->dvdd = devm_regulator_get(&dsi->dev, "dvdd"); + if (IS_ERR(ctx->dvdd)) { + dev_err(&dsi->dev, "Couldn't get dvdd regulator\n"); + return PTR_ERR(ctx->dvdd); + } + + ctx->avdd = devm_regulator_get(&dsi->dev, "avdd"); + if (IS_ERR(ctx->avdd)) { + dev_err(&dsi->dev, "Couldn't get avdd regulator\n"); + return PTR_ERR(ctx->avdd); + } + + ret = regulator_enable(ctx->dvdd); + if (ret) + return ret; + + msleep(5); + + ret = regulator_enable(ctx->avdd); + if (ret) + return ret; + + msleep(5); + + ctx->reset = devm_gpiod_get(&dsi->dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(ctx->reset)) { + dev_err(&dsi->dev, "Couldn't get our reset GPIO\n"); + return PTR_ERR(ctx->reset); + } + + np = of_parse_phandle(dsi->dev.of_node, "backlight", 0); + if (np) { + ctx->backlight = of_find_backlight_by_node(np); + of_node_put(np); + + if (!ctx->backlight) + return -EPROBE_DEFER; + } + + ret = drm_panel_add(&ctx->panel); + if (ret < 0) + return ret; + + dsi->mode_flags = MIPI_DSI_MODE_VIDEO_SYNC_PULSE; + dsi->format = MIPI_DSI_FMT_RGB888; + dsi->lanes = 4; + + return mipi_dsi_attach(dsi); +} + +static int s070wv20_dsi_remove(struct mipi_dsi_device *dsi) +{ + struct s070wv20 *ctx = mipi_dsi_get_drvdata(dsi); + + mipi_dsi_detach(dsi); + drm_panel_remove(&ctx->panel); + + if (ctx->backlight) + put_device(&ctx->backlight->dev); + + return 0; +} + +static const struct of_device_id s070wv20_of_match[] = { + { .compatible = "bananapi,s070wv20-ct16-dsi", }, + { } +}; +MODULE_DEVICE_TABLE(of, s070wv20_of_match); + +static struct mipi_dsi_driver s070wv20_driver = { + .probe = s070wv20_dsi_probe, + .remove = s070wv20_dsi_remove, + .driver = { + .name = "bananapi-s070wv20-ct16-dsi", + .of_match_table = s070wv20_of_match, + }, +}; +module_mipi_dsi_driver(s070wv20_driver); + +MODULE_AUTHOR("Jagan Teki <jagan@amarulasolutions.com>"); +MODULE_DESCRIPTION("Bananapi S070WV20-CT16 MIPI-DSI"); +MODULE_LICENSE("GPL v2");
Bananapi S070WV20-CT16 is 800x480, 4-lane MIPI-DSI panel which can be used to connect via BPI-M64 board, so add a driver for it. The same panel PCB comes with parallel RBG which is supported via panel-simple driver with "bananapi,s070wv20-ct16" compatible. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- drivers/gpu/drm/panel/Kconfig | 9 + drivers/gpu/drm/panel/Makefile | 1 + .../gpu/drm/panel/panel-bananapi-s070wv20.c | 336 ++++++++++++++++++ 3 files changed, 346 insertions(+) create mode 100644 drivers/gpu/drm/panel/panel-bananapi-s070wv20.c