@@ -121,9 +121,6 @@ void mt76x0_bss_info_changed(struct ieee80211_hw *hw,
MT_BKOFF_SLOT_CFG_SLOTTIME, slottime);
}
- if (changed & BSS_CHANGED_ASSOC)
- mt76x0_phy_recalibrate_after_assoc(dev);
-
mutex_unlock(&dev->mt76.mutex);
}
EXPORT_SYMBOL_GPL(mt76x0_bss_info_changed);
@@ -64,7 +64,6 @@ void mt76x0_phy_init(struct mt76x02_dev *dev);
int mt76x0_phy_wait_bbp_ready(struct mt76x02_dev *dev);
int mt76x0_phy_set_channel(struct mt76x02_dev *dev,
struct cfg80211_chan_def *chandef);
-void mt76x0_phy_recalibrate_after_assoc(struct mt76x02_dev *dev);
void mt76x0_phy_set_txpower(struct mt76x02_dev *dev);
void mt76x0_phy_calibrate(struct mt76x02_dev *dev, bool power_on);
@@ -212,44 +212,6 @@ int mt76x0_phy_wait_bbp_ready(struct mt76x02_dev *dev)
return 0;
}
-static void mt76x0_phy_vco_cal(struct mt76x02_dev *dev, u8 channel)
-{
- u8 val;
-
- val = mt76x0_rf_rr(dev, MT_RF(0, 4));
- if ((val & 0x70) != 0x30)
- return;
-
- /* closed loop calibarion - B0.R06.[3:0]: 1001 */
- mt76x0_rf_rmw(dev, MT_RF(0, 6), MT_RF_VCO_BP_CLOSE_LOOP_MASK,
- MT_RF_VCO_BP_CLOSE_LOOP | BIT(0));
-
- /* open loop calibration - B0.R05.[7:0]: 0x0 */
- mt76x0_rf_wr(dev, MT_RF(0, 5), 0x0);
-
- /* caliration mask - B0.R04.[2:0]: 000 */
- mt76x0_rf_clear(dev, MT_RF(0, 4), MT_RF_VCO_CAL_MASK);
-
- /* startup time - B0.R03.[2:0] startup_time: 011 */
- mt76x0_rf_rmw(dev, MT_RF(0, 3), MT_RF_START_TIME_MASK,
- MT_RF_START_TIME);
-
- /* settle_time - B0.R03.[6:4] */
- if (channel == 3 || channel == 4 || channel == 10)
- val = 0x50;
- else if (channel == 2 || channel == 5 || channel == 6 ||
- channel == 8 || channel == 11 || channel == 12)
- val = 0x40;
- else
- val = 0x60;
- mt76x0_rf_rmw(dev, MT_RF(0, 3), MT_RF_SETTLE_TIME_MASK, val);
-
- /* enable vco */
- mt76x0_rf_set(dev, MT_RF(0, 4), BIT(7));
-
- msleep(2);
-}
-
static void
mt76x0_phy_set_band(struct mt76x02_dev *dev, enum nl80211_band band)
{
@@ -670,18 +632,12 @@ int mt76x0_phy_set_channel(struct mt76x02_dev *dev,
mt76x0_phy_set_chan_bbp_params(dev, rf_bw_band);
mt76x02_init_agc_gain(dev);
- if (mt76_is_usb(dev)) {
- mt76x0_phy_vco_cal(dev, channel);
- } else {
- /* enable vco */
- mt76x0_rf_set(dev, MT_RF(0, 4), BIT(7));
- }
-
+ /* enable vco */
+ mt76x0_rf_set(dev, MT_RF(0, 4), BIT(7));
if (scan)
return 0;
- if (mt76_is_mmio(dev))
- mt76x0_phy_calibrate(dev, false);
+ mt76x0_phy_calibrate(dev, false);
mt76x0_phy_set_txpower(dev);
ieee80211_queue_delayed_work(dev->mt76.hw, &dev->cal_work,
@@ -690,39 +646,6 @@ int mt76x0_phy_set_channel(struct mt76x02_dev *dev,
return 0;
}
-void mt76x0_phy_recalibrate_after_assoc(struct mt76x02_dev *dev)
-{
- u32 tx_alc, reg_val;
- u8 channel = dev->mt76.chandef.chan->hw_value;
- int is_5ghz = (dev->mt76.chandef.chan->band == NL80211_BAND_5GHZ) ? 1 : 0;
-
- mt76x02_mcu_calibrate(dev, MCU_CAL_R, 0, false);
-
- mt76x0_phy_vco_cal(dev, channel);
-
- tx_alc = mt76_rr(dev, MT_TX_ALC_CFG_0);
- mt76_wr(dev, MT_TX_ALC_CFG_0, 0);
- usleep_range(500, 700);
-
- reg_val = mt76_rr(dev, MT_BBP(IBI, 9));
- mt76_wr(dev, MT_BBP(IBI, 9), 0xffffff7e);
-
- mt76x02_mcu_calibrate(dev, MCU_CAL_RXDCOC, 0, false);
-
- mt76x02_mcu_calibrate(dev, MCU_CAL_LC, is_5ghz, false);
- mt76x02_mcu_calibrate(dev, MCU_CAL_LOFT, is_5ghz, false);
- mt76x02_mcu_calibrate(dev, MCU_CAL_TXIQ, is_5ghz, false);
- mt76x02_mcu_calibrate(dev, MCU_CAL_TX_GROUP_DELAY, is_5ghz, false);
- mt76x02_mcu_calibrate(dev, MCU_CAL_RXIQ, is_5ghz, false);
- mt76x02_mcu_calibrate(dev, MCU_CAL_RX_GROUP_DELAY, is_5ghz, false);
-
- mt76_wr(dev, MT_BBP(IBI, 9), reg_val);
- mt76_wr(dev, MT_TX_ALC_CFG_0, tx_alc);
- msleep(100);
-
- mt76x02_mcu_calibrate(dev, MCU_CAL_RXDCOC, 1, false);
-}
-
static void mt76x0_phy_temp_sensor(struct mt76x02_dev *dev)
{
u8 rf_b7_73, rf_b0_66, rf_b0_67;
@@ -117,6 +117,7 @@ static int mt76x0u_start(struct ieee80211_hw *hw)
if (ret)
goto out;
+ mt76x0_phy_calibrate(dev, true);
ieee80211_queue_delayed_work(dev->mt76.hw, &dev->mac_work,
MT_CALIBRATE_INTERVAL);
ieee80211_queue_delayed_work(dev->mt76.hw, &dev->cal_work,
Align phy calibration logic between mt76x0u and mt76x0e drivers This patch improves connection stability with low SNR Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> --- .../net/wireless/mediatek/mt76/mt76x0/main.c | 3 - .../wireless/mediatek/mt76/mt76x0/mt76x0.h | 1 - .../net/wireless/mediatek/mt76/mt76x0/phy.c | 83 +------------------ .../net/wireless/mediatek/mt76/mt76x0/usb.c | 1 + 4 files changed, 4 insertions(+), 84 deletions(-)