diff mbox series

[RFC,v2] scsi: ufs: Fix hynix ufs bug with quirk on hi36xx SoC

Message ID 1540254710-26936-1-git-send-email-john.stultz@linaro.org (mailing list archive)
State Superseded
Headers show
Series [RFC,v2] scsi: ufs: Fix hynix ufs bug with quirk on hi36xx SoC | expand

Commit Message

John Stultz Oct. 23, 2018, 12:31 a.m. UTC
From: Wei Li <liwei213@huawei.com>

Hynix ufs has deviations on hi36xx platform which will result in
ufs bursts transfer failures.

To fix the problem, the Hynix device must set the register
VS_DebugSaveConfigTime to 0x10, which will set time reference
for SaveConfigTime is 250 ns. The time reference for SaveConfigTime
is 40 ns by default.

This patch is necessary to boot on HiKey960 boards that use
Hynix UFS chips (H28U62301AMR model: hB8aL1).

Not sure if this is the preferred way of scoping the quirk to
the controller or not. Feedback would be greatly appreciated!

Cc: Vinayak Holikatti <vinholikatti@gmail.com>
Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Wei Li <liwei213@huawei.com>
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
[jstultz: Forward ported from older code, slight tweak to commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
---
v2:
* Narrowed the UFS chip model to the specific model where
  the issue has been seen. (SKhynix  H28U62301AMR model: hB8aL1)
* Reworked logic to be contained in ufs-hisi.c since it seems to
  be a controller issue that crops up with this specific chip
---
 drivers/scsi/ufs/ufs-hisi.c | 14 ++++++++++++++
 drivers/scsi/ufs/ufshcd.c   |  2 +-
 drivers/scsi/ufs/ufshcd.h   |  2 ++
 3 files changed, 17 insertions(+), 1 deletion(-)

Comments

Martin K. Petersen Oct. 24, 2018, 2:47 a.m. UTC | #1
John,

Thanks for tweaking this.

> Not sure if this is the preferred way of scoping the quirk to
> the controller or not. Feedback would be greatly appreciated!

I think my preference would be to add:

       UFS_FIX(UFS_VENDOR_SKHYNIX, "hB8aL1",
                UFS_DEVICE_QUIRK_HOST_VS_DEBUG),

to ufs_fixups[] and then key off of that in the driver. That's how we do
it in SCSI but the UFS folks may have a different opinion.
John Stultz Oct. 24, 2018, 3:02 a.m. UTC | #2
On Tue, Oct 23, 2018 at 7:47 PM, Martin K. Petersen
<martin.petersen@oracle.com> wrote:
>
> John,
>
> Thanks for tweaking this.
>
>> Not sure if this is the preferred way of scoping the quirk to
>> the controller or not. Feedback would be greatly appreciated!
>
> I think my preference would be to add:
>
>        UFS_FIX(UFS_VENDOR_SKHYNIX, "hB8aL1",
>                 UFS_DEVICE_QUIRK_HOST_VS_DEBUG),
>
> to ufs_fixups[] and then key off of that in the driver. That's how we do
> it in SCSI but the UFS folks may have a different opinion.

Ok. Yea, I saw something similar in the qcom code, but I wasn't sure
if folks would want host specific quirks isolated to host code.

I appreciate the clarification, I'll rework and respin it here shortly.

Thanks again!
-john
Martin K. Petersen Oct. 24, 2018, 3:09 a.m. UTC | #3
John,

> Ok. Yea, I saw something similar in the qcom code, but I wasn't sure
> if folks would want host specific quirks isolated to host code.

Yeah, that's why I thought it would be good for the UFS folks to chime
in.
diff mbox series

Patch

diff --git a/drivers/scsi/ufs/ufs-hisi.c b/drivers/scsi/ufs/ufs-hisi.c
index 46df707..a306acf 100644
--- a/drivers/scsi/ufs/ufs-hisi.c
+++ b/drivers/scsi/ufs/ufs-hisi.c
@@ -20,6 +20,7 @@ 
 #include "unipro.h"
 #include "ufs-hisi.h"
 #include "ufshci.h"
+#include "ufs_quirks.h"
 
 static int ufs_hisi_check_hibern8(struct ufs_hba *hba)
 {
@@ -390,6 +391,19 @@  static void ufs_hisi_set_dev_cap(struct ufs_hisi_dev_params *hisi_param)
 
 static void ufs_hisi_pwr_change_pre_change(struct ufs_hba *hba)
 {
+	struct ufs_dev_desc card = {0};
+
+	if (!ufs_get_device_desc(hba, &card)) {
+		if ((card.wmanufacturerid == UFS_VENDOR_SKHYNIX) &&
+		    (STR_PRFX_EQUAL("hB8aL1" /*H28U62301AMR*/, card.model))) {
+			pr_info("Hynix ufs flash device must set VS_DebugSaveConfigTime 0x10\n");
+			/* VS_DebugSaveConfigTime */
+			ufshcd_dme_set(hba, UIC_ARG_MIB(0xD0A0), 0x10);
+			/* sync length */
+			ufshcd_dme_set(hba, UIC_ARG_MIB(0x1556), 0x48);
+		}
+	}
+
 	/* update */
 	ufshcd_dme_set(hba, UIC_ARG_MIB(0x15A8), 0x1);
 	/* PA_TxSkip */
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index c55f38e..326fa32 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -6242,7 +6242,7 @@  static int ufshcd_scsi_add_wlus(struct ufs_hba *hba)
 	return ret;
 }
 
-static int ufs_get_device_desc(struct ufs_hba *hba,
+int ufs_get_device_desc(struct ufs_hba *hba,
 			       struct ufs_dev_desc *dev_desc)
 {
 	int err;
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 33fdd3f..31c0562 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -877,6 +877,8 @@  int ufshcd_read_desc_param(struct ufs_hba *hba,
 			   u8 param_offset,
 			   u8 *param_read_buf,
 			   u8 param_size);
+int ufs_get_device_desc(struct ufs_hba *hba,
+			struct ufs_dev_desc *dev_desc);
 int ufshcd_query_attr(struct ufs_hba *hba, enum query_opcode opcode,
 		      enum attr_idn idn, u8 index, u8 selector, u32 *attr_val);
 int ufshcd_query_flag(struct ufs_hba *hba, enum query_opcode opcode,