| Message ID | 20181023155035.9101-5-jagan@amarulasolutions.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | drm/sun4i: Allwinner A64 MIPI-DSI support | expand |
On Tue, Oct 23, 2018 at 09:20:24PM +0530, Jagan Teki wrote: > The MIPI DSI controller on Allwinner A64 is similar to > Allwinner A31 without support of DSI mod clock(CLK_DSI_SCLK) > > So, alter has_mod_clk bool via driver data for respective > SoC's compatible. > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > --- > Changes for v2: > - none > > drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 47 ++++++++++++++++++++------ > drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h | 5 +++ > 2 files changed, 41 insertions(+), 11 deletions(-) > > diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > index e3b34a345546..8e9c76febca2 100644 > --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > @@ -10,6 +10,7 @@ > #include <linux/component.h> > #include <linux/crc-ccitt.h> > #include <linux/of_address.h> > +#include <linux/of_device.h> > #include <linux/pm_runtime.h> > #include <linux/regmap.h> > #include <linux/reset.h> > @@ -981,6 +982,8 @@ static int sun6i_dsi_probe(struct platform_device *pdev) > dsi->host.ops = &sun6i_dsi_host_ops; > dsi->host.dev = dev; > > + dsi->variant = of_device_get_match_data(dev); > + > res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > base = devm_ioremap_resource(dev, res); > if (IS_ERR(base)) { > @@ -1001,17 +1004,20 @@ static int sun6i_dsi_probe(struct platform_device *pdev) > return PTR_ERR(dsi->reset); > } > > - dsi->mod_clk = devm_clk_get(dev, "mod"); > - if (IS_ERR(dsi->mod_clk)) { > - dev_err(dev, "Couldn't get the DSI mod clock\n"); > - return PTR_ERR(dsi->mod_clk); > + if (dsi->variant->has_mod_clk) { > + dsi->mod_clk = devm_clk_get(dev, "mod"); > + if (IS_ERR(dsi->mod_clk)) { > + dev_err(dev, "Couldn't get the DSI mod clock\n"); > + return PTR_ERR(dsi->mod_clk); > + } > } > > /* > * In order to operate properly, that clock seems to be always > * set to 297MHz. > */ > - clk_set_rate_exclusive(dsi->mod_clk, 297000000); > + if (dsi->variant->has_mod_clk) > + clk_set_rate_exclusive(dsi->mod_clk, 297000000); > > dphy_node = of_parse_phandle(dev->of_node, "phys", 0); > ret = sun6i_dphy_probe(dsi, dphy_node); > @@ -1043,7 +1049,8 @@ static int sun6i_dsi_probe(struct platform_device *pdev) > pm_runtime_disable(dev); > sun6i_dphy_remove(dsi); > err_unprotect_clk: > - clk_rate_exclusive_put(dsi->mod_clk); > + if (dsi->variant->has_mod_clk) > + clk_rate_exclusive_put(dsi->mod_clk); > return ret; > } > > @@ -1056,7 +1063,8 @@ static int sun6i_dsi_remove(struct platform_device *pdev) > mipi_dsi_host_unregister(&dsi->host); > pm_runtime_disable(dev); > sun6i_dphy_remove(dsi); > - clk_rate_exclusive_put(dsi->mod_clk); > + if (dsi->variant->has_mod_clk) > + clk_rate_exclusive_put(dsi->mod_clk); > > return 0; > } > @@ -1066,7 +1074,8 @@ static int __maybe_unused sun6i_dsi_runtime_resume(struct device *dev) > struct sun6i_dsi *dsi = dev_get_drvdata(dev); > > reset_control_deassert(dsi->reset); > - clk_prepare_enable(dsi->mod_clk); > + if (dsi->variant->has_mod_clk) > + clk_prepare_enable(dsi->mod_clk); > > /* > * Enable the DSI block. > @@ -1094,7 +1103,8 @@ static int __maybe_unused sun6i_dsi_runtime_suspend(struct device *dev) > { > struct sun6i_dsi *dsi = dev_get_drvdata(dev); > > - clk_disable_unprepare(dsi->mod_clk); > + if (dsi->variant->has_mod_clk) > + clk_disable_unprepare(dsi->mod_clk); > reset_control_assert(dsi->reset); > > return 0; > @@ -1106,9 +1116,24 @@ static const struct dev_pm_ops sun6i_dsi_pm_ops = { > NULL) > }; > > +static const struct sun6i_dsi_variant sun6i_a31_dsi = { > + .has_mod_clk = true, > +}; > + > +static const struct sun6i_dsi_variant sun50i_a64_dsi = { > + .has_mod_clk = false, This is the default already. > +}; > + > static const struct of_device_id sun6i_dsi_of_table[] = { > - { .compatible = "allwinner,sun6i-a31-mipi-dsi" }, > - { } > + { > + .compatible = "allwinner,sun6i-a31-mipi-dsi", > + .data = &sun6i_a31_dsi, > + }, > + { > + .compatible = "allwinner,sun50i-a64-mipi-dsi", > + .data = &sun50i_a64_dsi, > + }, > + { /* sentinel */ } > }; > MODULE_DEVICE_TABLE(of, sun6i_dsi_of_table); > > diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h > index dbbc5b3ecbda..597b62227019 100644 > --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h > +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h > @@ -20,6 +20,10 @@ struct sun6i_dphy { > struct reset_control *reset; > }; > > +struct sun6i_dsi_variant { > + bool has_mod_clk; > +}; > + This should be part of a separate patch. Maxime
On Wed, Oct 24, 2018 at 11:36 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote: > > On Tue, Oct 23, 2018 at 09:20:24PM +0530, Jagan Teki wrote: > > The MIPI DSI controller on Allwinner A64 is similar to > > Allwinner A31 without support of DSI mod clock(CLK_DSI_SCLK) > > > > So, alter has_mod_clk bool via driver data for respective > > SoC's compatible. > > > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > > --- > > Changes for v2: > > - none > > > > drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 47 ++++++++++++++++++++------ > > drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h | 5 +++ > > 2 files changed, 41 insertions(+), 11 deletions(-) > > > > diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > > index e3b34a345546..8e9c76febca2 100644 > > --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > > +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > > @@ -10,6 +10,7 @@ > > #include <linux/component.h> > > #include <linux/crc-ccitt.h> > > #include <linux/of_address.h> > > +#include <linux/of_device.h> > > #include <linux/pm_runtime.h> > > #include <linux/regmap.h> > > #include <linux/reset.h> > > @@ -981,6 +982,8 @@ static int sun6i_dsi_probe(struct platform_device *pdev) > > dsi->host.ops = &sun6i_dsi_host_ops; > > dsi->host.dev = dev; > > > > + dsi->variant = of_device_get_match_data(dev); > > + > > res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > > base = devm_ioremap_resource(dev, res); > > if (IS_ERR(base)) { > > @@ -1001,17 +1004,20 @@ static int sun6i_dsi_probe(struct platform_device *pdev) > > return PTR_ERR(dsi->reset); > > } > > > > - dsi->mod_clk = devm_clk_get(dev, "mod"); > > - if (IS_ERR(dsi->mod_clk)) { > > - dev_err(dev, "Couldn't get the DSI mod clock\n"); > > - return PTR_ERR(dsi->mod_clk); > > + if (dsi->variant->has_mod_clk) { > > + dsi->mod_clk = devm_clk_get(dev, "mod"); > > + if (IS_ERR(dsi->mod_clk)) { > > + dev_err(dev, "Couldn't get the DSI mod clock\n"); > > + return PTR_ERR(dsi->mod_clk); > > + } > > } > > > > /* > > * In order to operate properly, that clock seems to be always > > * set to 297MHz. > > */ > > - clk_set_rate_exclusive(dsi->mod_clk, 297000000); > > + if (dsi->variant->has_mod_clk) > > + clk_set_rate_exclusive(dsi->mod_clk, 297000000); > > > > dphy_node = of_parse_phandle(dev->of_node, "phys", 0); > > ret = sun6i_dphy_probe(dsi, dphy_node); > > @@ -1043,7 +1049,8 @@ static int sun6i_dsi_probe(struct platform_device *pdev) > > pm_runtime_disable(dev); > > sun6i_dphy_remove(dsi); > > err_unprotect_clk: > > - clk_rate_exclusive_put(dsi->mod_clk); > > + if (dsi->variant->has_mod_clk) > > + clk_rate_exclusive_put(dsi->mod_clk); > > return ret; > > } > > > > @@ -1056,7 +1063,8 @@ static int sun6i_dsi_remove(struct platform_device *pdev) > > mipi_dsi_host_unregister(&dsi->host); > > pm_runtime_disable(dev); > > sun6i_dphy_remove(dsi); > > - clk_rate_exclusive_put(dsi->mod_clk); > > + if (dsi->variant->has_mod_clk) > > + clk_rate_exclusive_put(dsi->mod_clk); > > > > return 0; > > } > > @@ -1066,7 +1074,8 @@ static int __maybe_unused sun6i_dsi_runtime_resume(struct device *dev) > > struct sun6i_dsi *dsi = dev_get_drvdata(dev); > > > > reset_control_deassert(dsi->reset); > > - clk_prepare_enable(dsi->mod_clk); > > + if (dsi->variant->has_mod_clk) > > + clk_prepare_enable(dsi->mod_clk); > > > > /* > > * Enable the DSI block. > > @@ -1094,7 +1103,8 @@ static int __maybe_unused sun6i_dsi_runtime_suspend(struct device *dev) > > { > > struct sun6i_dsi *dsi = dev_get_drvdata(dev); > > > > - clk_disable_unprepare(dsi->mod_clk); > > + if (dsi->variant->has_mod_clk) > > + clk_disable_unprepare(dsi->mod_clk); > > reset_control_assert(dsi->reset); > > > > return 0; > > @@ -1106,9 +1116,24 @@ static const struct dev_pm_ops sun6i_dsi_pm_ops = { > > NULL) > > }; > > > > +static const struct sun6i_dsi_variant sun6i_a31_dsi = { > > + .has_mod_clk = true, > > +}; > > + > > +static const struct sun6i_dsi_variant sun50i_a64_dsi = { > > + .has_mod_clk = false, > > This is the default already. True but we need to assign the .data. how about checking device compatible? I'm thinking of difference in driver data in future between SoC's > > > +}; > > + > > static const struct of_device_id sun6i_dsi_of_table[] = { > > - { .compatible = "allwinner,sun6i-a31-mipi-dsi" }, > > - { } > > + { > > + .compatible = "allwinner,sun6i-a31-mipi-dsi", > > + .data = &sun6i_a31_dsi, > > + }, > > + { > > + .compatible = "allwinner,sun50i-a64-mipi-dsi", > > + .data = &sun50i_a64_dsi, > > + }, > > + { /* sentinel */ } > > }; > > MODULE_DEVICE_TABLE(of, sun6i_dsi_of_table); > > > > diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h > > index dbbc5b3ecbda..597b62227019 100644 > > --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h > > +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h > > @@ -20,6 +20,10 @@ struct sun6i_dphy { > > struct reset_control *reset; > > }; > > > > +struct sun6i_dsi_variant { > > + bool has_mod_clk; > > +}; > > + > > This should be part of a separate patch. How come, because has_mod_clk is using in driver file?
On Thu, Oct 25, 2018 at 04:32:06PM +0530, Jagan Teki wrote: > On Wed, Oct 24, 2018 at 11:36 PM Maxime Ripard > <maxime.ripard@bootlin.com> wrote: > > > > On Tue, Oct 23, 2018 at 09:20:24PM +0530, Jagan Teki wrote: > > > The MIPI DSI controller on Allwinner A64 is similar to > > > Allwinner A31 without support of DSI mod clock(CLK_DSI_SCLK) > > > > > > So, alter has_mod_clk bool via driver data for respective > > > SoC's compatible. > > > > > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > > > --- > > > Changes for v2: > > > - none > > > > > > drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 47 ++++++++++++++++++++------ > > > drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h | 5 +++ > > > 2 files changed, 41 insertions(+), 11 deletions(-) > > > > > > diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > > > index e3b34a345546..8e9c76febca2 100644 > > > --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > > > +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > > > @@ -10,6 +10,7 @@ > > > #include <linux/component.h> > > > #include <linux/crc-ccitt.h> > > > #include <linux/of_address.h> > > > +#include <linux/of_device.h> > > > #include <linux/pm_runtime.h> > > > #include <linux/regmap.h> > > > #include <linux/reset.h> > > > @@ -981,6 +982,8 @@ static int sun6i_dsi_probe(struct platform_device *pdev) > > > dsi->host.ops = &sun6i_dsi_host_ops; > > > dsi->host.dev = dev; > > > > > > + dsi->variant = of_device_get_match_data(dev); > > > + > > > res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > > > base = devm_ioremap_resource(dev, res); > > > if (IS_ERR(base)) { > > > @@ -1001,17 +1004,20 @@ static int sun6i_dsi_probe(struct platform_device *pdev) > > > return PTR_ERR(dsi->reset); > > > } > > > > > > - dsi->mod_clk = devm_clk_get(dev, "mod"); > > > - if (IS_ERR(dsi->mod_clk)) { > > > - dev_err(dev, "Couldn't get the DSI mod clock\n"); > > > - return PTR_ERR(dsi->mod_clk); > > > + if (dsi->variant->has_mod_clk) { > > > + dsi->mod_clk = devm_clk_get(dev, "mod"); > > > + if (IS_ERR(dsi->mod_clk)) { > > > + dev_err(dev, "Couldn't get the DSI mod clock\n"); > > > + return PTR_ERR(dsi->mod_clk); > > > + } > > > } > > > > > > /* > > > * In order to operate properly, that clock seems to be always > > > * set to 297MHz. > > > */ > > > - clk_set_rate_exclusive(dsi->mod_clk, 297000000); > > > + if (dsi->variant->has_mod_clk) > > > + clk_set_rate_exclusive(dsi->mod_clk, 297000000); > > > > > > dphy_node = of_parse_phandle(dev->of_node, "phys", 0); > > > ret = sun6i_dphy_probe(dsi, dphy_node); > > > @@ -1043,7 +1049,8 @@ static int sun6i_dsi_probe(struct platform_device *pdev) > > > pm_runtime_disable(dev); > > > sun6i_dphy_remove(dsi); > > > err_unprotect_clk: > > > - clk_rate_exclusive_put(dsi->mod_clk); > > > + if (dsi->variant->has_mod_clk) > > > + clk_rate_exclusive_put(dsi->mod_clk); > > > return ret; > > > } > > > > > > @@ -1056,7 +1063,8 @@ static int sun6i_dsi_remove(struct platform_device *pdev) > > > mipi_dsi_host_unregister(&dsi->host); > > > pm_runtime_disable(dev); > > > sun6i_dphy_remove(dsi); > > > - clk_rate_exclusive_put(dsi->mod_clk); > > > + if (dsi->variant->has_mod_clk) > > > + clk_rate_exclusive_put(dsi->mod_clk); > > > > > > return 0; > > > } > > > @@ -1066,7 +1074,8 @@ static int __maybe_unused sun6i_dsi_runtime_resume(struct device *dev) > > > struct sun6i_dsi *dsi = dev_get_drvdata(dev); > > > > > > reset_control_deassert(dsi->reset); > > > - clk_prepare_enable(dsi->mod_clk); > > > + if (dsi->variant->has_mod_clk) > > > + clk_prepare_enable(dsi->mod_clk); > > > > > > /* > > > * Enable the DSI block. > > > @@ -1094,7 +1103,8 @@ static int __maybe_unused sun6i_dsi_runtime_suspend(struct device *dev) > > > { > > > struct sun6i_dsi *dsi = dev_get_drvdata(dev); > > > > > > - clk_disable_unprepare(dsi->mod_clk); > > > + if (dsi->variant->has_mod_clk) > > > + clk_disable_unprepare(dsi->mod_clk); > > > reset_control_assert(dsi->reset); > > > > > > return 0; > > > @@ -1106,9 +1116,24 @@ static const struct dev_pm_ops sun6i_dsi_pm_ops = { > > > NULL) > > > }; > > > > > > +static const struct sun6i_dsi_variant sun6i_a31_dsi = { > > > + .has_mod_clk = true, > > > +}; > > > + > > > +static const struct sun6i_dsi_variant sun50i_a64_dsi = { > > > + .has_mod_clk = false, > > > > This is the default already. > > True but we need to assign the .data. how about checking device > compatible? I'm thinking of difference in driver data in future > between SoC's That's not my point. You'll need the structure, but has_mod_clk will be initialised to false already, so you can drop the explicit assignment. > > > > > +}; > > > + > > > static const struct of_device_id sun6i_dsi_of_table[] = { > > > - { .compatible = "allwinner,sun6i-a31-mipi-dsi" }, > > > - { } > > > + { > > > + .compatible = "allwinner,sun6i-a31-mipi-dsi", > > > + .data = &sun6i_a31_dsi, > > > + }, > > > + { > > > + .compatible = "allwinner,sun50i-a64-mipi-dsi", > > > + .data = &sun50i_a64_dsi, > > > + }, > > > + { /* sentinel */ } > > > }; > > > MODULE_DEVICE_TABLE(of, sun6i_dsi_of_table); > > > > > > diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h > > > index dbbc5b3ecbda..597b62227019 100644 > > > --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h > > > +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h > > > @@ -20,6 +20,10 @@ struct sun6i_dphy { > > > struct reset_control *reset; > > > }; > > > > > > +struct sun6i_dsi_variant { > > > + bool has_mod_clk; > > > +}; > > > + > > > > This should be part of a separate patch. > > How come, because has_mod_clk is using in driver file? You're doing two things here: Adding a quirk structure, and adding support for an SoC. This should be two patches. Maxime
diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c index e3b34a345546..8e9c76febca2 100644 --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c @@ -10,6 +10,7 @@ #include <linux/component.h> #include <linux/crc-ccitt.h> #include <linux/of_address.h> +#include <linux/of_device.h> #include <linux/pm_runtime.h> #include <linux/regmap.h> #include <linux/reset.h> @@ -981,6 +982,8 @@ static int sun6i_dsi_probe(struct platform_device *pdev) dsi->host.ops = &sun6i_dsi_host_ops; dsi->host.dev = dev; + dsi->variant = of_device_get_match_data(dev); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); base = devm_ioremap_resource(dev, res); if (IS_ERR(base)) { @@ -1001,17 +1004,20 @@ static int sun6i_dsi_probe(struct platform_device *pdev) return PTR_ERR(dsi->reset); } - dsi->mod_clk = devm_clk_get(dev, "mod"); - if (IS_ERR(dsi->mod_clk)) { - dev_err(dev, "Couldn't get the DSI mod clock\n"); - return PTR_ERR(dsi->mod_clk); + if (dsi->variant->has_mod_clk) { + dsi->mod_clk = devm_clk_get(dev, "mod"); + if (IS_ERR(dsi->mod_clk)) { + dev_err(dev, "Couldn't get the DSI mod clock\n"); + return PTR_ERR(dsi->mod_clk); + } } /* * In order to operate properly, that clock seems to be always * set to 297MHz. */ - clk_set_rate_exclusive(dsi->mod_clk, 297000000); + if (dsi->variant->has_mod_clk) + clk_set_rate_exclusive(dsi->mod_clk, 297000000); dphy_node = of_parse_phandle(dev->of_node, "phys", 0); ret = sun6i_dphy_probe(dsi, dphy_node); @@ -1043,7 +1049,8 @@ static int sun6i_dsi_probe(struct platform_device *pdev) pm_runtime_disable(dev); sun6i_dphy_remove(dsi); err_unprotect_clk: - clk_rate_exclusive_put(dsi->mod_clk); + if (dsi->variant->has_mod_clk) + clk_rate_exclusive_put(dsi->mod_clk); return ret; } @@ -1056,7 +1063,8 @@ static int sun6i_dsi_remove(struct platform_device *pdev) mipi_dsi_host_unregister(&dsi->host); pm_runtime_disable(dev); sun6i_dphy_remove(dsi); - clk_rate_exclusive_put(dsi->mod_clk); + if (dsi->variant->has_mod_clk) + clk_rate_exclusive_put(dsi->mod_clk); return 0; } @@ -1066,7 +1074,8 @@ static int __maybe_unused sun6i_dsi_runtime_resume(struct device *dev) struct sun6i_dsi *dsi = dev_get_drvdata(dev); reset_control_deassert(dsi->reset); - clk_prepare_enable(dsi->mod_clk); + if (dsi->variant->has_mod_clk) + clk_prepare_enable(dsi->mod_clk); /* * Enable the DSI block. @@ -1094,7 +1103,8 @@ static int __maybe_unused sun6i_dsi_runtime_suspend(struct device *dev) { struct sun6i_dsi *dsi = dev_get_drvdata(dev); - clk_disable_unprepare(dsi->mod_clk); + if (dsi->variant->has_mod_clk) + clk_disable_unprepare(dsi->mod_clk); reset_control_assert(dsi->reset); return 0; @@ -1106,9 +1116,24 @@ static const struct dev_pm_ops sun6i_dsi_pm_ops = { NULL) }; +static const struct sun6i_dsi_variant sun6i_a31_dsi = { + .has_mod_clk = true, +}; + +static const struct sun6i_dsi_variant sun50i_a64_dsi = { + .has_mod_clk = false, +}; + static const struct of_device_id sun6i_dsi_of_table[] = { - { .compatible = "allwinner,sun6i-a31-mipi-dsi" }, - { } + { + .compatible = "allwinner,sun6i-a31-mipi-dsi", + .data = &sun6i_a31_dsi, + }, + { + .compatible = "allwinner,sun50i-a64-mipi-dsi", + .data = &sun50i_a64_dsi, + }, + { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, sun6i_dsi_of_table); diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h index dbbc5b3ecbda..597b62227019 100644 --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h @@ -20,6 +20,10 @@ struct sun6i_dphy { struct reset_control *reset; }; +struct sun6i_dsi_variant { + bool has_mod_clk; +}; + struct sun6i_dsi { struct drm_connector connector; struct drm_encoder encoder; @@ -35,6 +39,7 @@ struct sun6i_dsi { struct sun4i_drv *drv; struct mipi_dsi_device *device; struct drm_panel *panel; + const struct sun6i_dsi_variant *variant; }; static inline struct sun6i_dsi *host_to_sun6i_dsi(struct mipi_dsi_host *host)
The MIPI DSI controller on Allwinner A64 is similar to Allwinner A31 without support of DSI mod clock(CLK_DSI_SCLK) So, alter has_mod_clk bool via driver data for respective SoC's compatible. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- Changes for v2: - none drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 47 ++++++++++++++++++++------ drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h | 5 +++ 2 files changed, 41 insertions(+), 11 deletions(-)