diff mbox series

arm64: dts: ls1012a: Add FRWY-LS1012A board support

Message ID 20181016074102.10126-1-pramod.kumar_1@nxp.com (mailing list archive)
State New, archived
Headers show
Series arm64: dts: ls1012a: Add FRWY-LS1012A board support | expand

Commit Message

Pramod Kumar Oct. 16, 2018, 7:40 a.m. UTC
LS1012A-FRWY is an ls1012a based SoC board.
Key features of this board are  Micro SD, USB 3.0,
upto 1GB DDR, UART

Signed-off-by: Pramod Kumar <pramod.kumar_1@nxp.com>
---
 arch/arm64/boot/dts/freescale/Makefile        |  1 +
 .../boot/dts/freescale/fsl-ls1012a-frwy.dts   | 25 +++++++++++++++++++
 2 files changed, 26 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts

Comments

Shawn Guo Oct. 31, 2018, 6:48 a.m. UTC | #1
On Tue, Oct 16, 2018 at 07:40:29AM +0000, Pramod Kumar wrote:
> LS1012A-FRWY is an ls1012a based SoC board.
> Key features of this board are  Micro SD, USB 3.0,
> upto 1GB DDR, UART
> 
> Signed-off-by: Pramod Kumar <pramod.kumar_1@nxp.com>

Applied, thanks.
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 86e18adb695a..25a9fb766438 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -1,5 +1,6 @@ 
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frwy.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts
new file mode 100644
index 000000000000..8749634c55ee
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts
@@ -0,0 +1,25 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Freescale LS1012A FRWY Board.
+ *
+ * Copyright 2018 NXP
+ *
+ * Pramod Kumar <pramod.kumar_1@nxp.com>
+ *
+ */
+/dts-v1/;
+
+#include "fsl-ls1012a.dtsi"
+
+/ {
+	model = "LS1012A FRWY Board";
+	compatible = "fsl,ls1012a-frwy", "fsl,ls1012a";
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};