diff mbox series

[6/9] PCI: consolidate PCI config entry in drivers/pci

Message ID 20181019120952.32763-7-hch@lst.de (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show
Series [1/9] aha152x: rename the PCMCIA define | expand

Commit Message

Christoph Hellwig Oct. 19, 2018, 12:09 p.m. UTC 
There is no good reason to duplicate the PCI menu in every architecture.
Instead provide a selectable HAVE_PCI symbol that indicates availability
of PCI support and the handle the rest in drivers/pci.

Note that for powerpc we now select HAVE_PCI globally instead of the
convoluted mess of conditional or or non-conditional support per board,
similar to what we do e.g. on x86.  For alpha PCI is selected for the
non-jensen configs as it was the default before, and a lot of code does
not compile without PCI enabled.  On other architectures with limited
PCI support that wasn't as complicated I've left the selection as-is.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
---
 arch/alpha/Kconfig                     | 15 ++-------
 arch/arc/Kconfig                       | 20 ------------
 arch/arc/plat-axs10x/Kconfig           |  2 +-
 arch/arc/plat-hsdk/Kconfig             |  2 +-
 arch/arm/Kconfig                       | 19 ++----------
 arch/arm/mach-ks8695/Kconfig           | 10 +++---
 arch/arm/mach-pxa/Kconfig              |  2 +-
 arch/arm64/Kconfig                     | 10 +-----
 arch/hexagon/Kconfig                   |  3 --
 arch/ia64/Kconfig                      |  9 +-----
 arch/m68k/Kconfig.bus                  | 11 -------
 arch/m68k/Kconfig.cpu                  |  1 +
 arch/microblaze/Kconfig                |  6 +---
 arch/mips/Kconfig                      | 43 +++++++++-----------------
 arch/mips/alchemy/Kconfig              |  6 ++--
 arch/mips/ath25/Kconfig                |  2 +-
 arch/mips/ath79/Kconfig                |  8 ++---
 arch/mips/bcm63xx/Kconfig              | 14 ++++-----
 arch/mips/lantiq/Kconfig               |  2 +-
 arch/mips/loongson64/Kconfig           |  6 ++--
 arch/mips/pmcs-msp71xx/Kconfig         | 10 +++---
 arch/mips/ralink/Kconfig               |  8 ++---
 arch/mips/sibyte/Kconfig               | 10 +++---
 arch/mips/txx9/Kconfig                 |  8 ++---
 arch/mips/vr41xx/Kconfig               |  8 ++---
 arch/parisc/Kconfig                    |  1 +
 arch/powerpc/Kconfig                   | 25 ++++-----------
 arch/powerpc/platforms/44x/Kconfig     |  1 -
 arch/powerpc/platforms/512x/Kconfig    |  1 -
 arch/powerpc/platforms/52xx/Kconfig    |  1 -
 arch/powerpc/platforms/83xx/Kconfig    |  1 -
 arch/powerpc/platforms/85xx/Kconfig    |  1 -
 arch/powerpc/platforms/86xx/Kconfig    |  2 --
 arch/powerpc/platforms/Kconfig         |  1 -
 arch/powerpc/platforms/Kconfig.cputype |  2 --
 arch/powerpc/platforms/ps3/Kconfig     |  1 -
 arch/riscv/Kconfig                     | 18 ++---------
 arch/s390/Kconfig                      | 23 +++++---------
 arch/sh/Kconfig                        | 19 ++----------
 arch/sh/boards/Kconfig                 | 30 +++++++++---------
 arch/sparc/Kconfig                     | 15 +--------
 arch/um/Kconfig                        |  3 --
 arch/unicore32/Kconfig                 | 11 +------
 arch/x86/Kconfig                       | 12 +------
 arch/x86/configs/i386_defconfig        |  1 +
 arch/x86/configs/x86_64_defconfig      |  1 +
 arch/xtensa/Kconfig                    | 16 +---------
 arch/xtensa/configs/common_defconfig   |  1 +
 arch/xtensa/configs/iss_defconfig      |  1 -
 drivers/Kconfig                        |  4 +++
 drivers/parisc/Kconfig                 | 11 -------
 drivers/pci/Kconfig                    | 12 +++++++
 drivers/pci/endpoint/Kconfig           |  2 +-
 53 files changed, 133 insertions(+), 319 deletions(-)

Comments

Russell King (Oracle) Oct. 19, 2018, 12:22 p.m. UTC | #1 
On Fri, Oct 19, 2018 at 02:09:49PM +0200, Christoph Hellwig wrote:
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index e33735ce1c14..7495d0a0aa31 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -149,9 +149,6 @@ config ARM_DMA_IOMMU_ALIGNMENT
>  
>  endif
>  
> -config MIGHT_HAVE_PCI
> -	bool
> -
>  config SYS_SUPPORTS_APM_EMULATION
>  	bool
>  
> @@ -320,7 +317,7 @@ config ARCH_MULTIPLATFORM
>  	select COMMON_CLK
>  	select GENERIC_CLOCKEVENTS
>  	select GENERIC_IRQ_MULTI_HANDLER
> -	select MIGHT_HAVE_PCI
> +	select HAVE_PCI
>  	select PCI_DOMAINS if PCI
>  	select SPARSE_IRQ
>  	select USE_OF
> @@ -436,7 +433,7 @@ config ARCH_IXP4XX
>  	select DMABOUNCE if PCI
>  	select GENERIC_CLOCKEVENTS
>  	select GPIOLIB
> -	select MIGHT_HAVE_PCI
> +	select HAVE_PCI
>  	select NEED_MACH_IO_H
>  	select USB_EHCI_BIG_ENDIAN_DESC
>  	select USB_EHCI_BIG_ENDIAN_MMIO
> @@ -449,7 +446,7 @@ config ARCH_DOVE
>  	select GENERIC_CLOCKEVENTS
>  	select GENERIC_IRQ_MULTI_HANDLER
>  	select GPIOLIB
> -	select MIGHT_HAVE_PCI
> +	select HAVE_PCI
>  	select MVEBU_MBUS
>  	select PINCTRL
>  	select PINCTRL_DOVE
> @@ -1216,14 +1213,6 @@ config ISA_DMA
>  config ISA_DMA_API
>  	bool
>  
> -config PCI
> -	bool "PCI support" if MIGHT_HAVE_PCI
> -	help
> -	  Find out whether you have a PCI motherboard. PCI is the name of a
> -	  bus system, i.e. the way the CPU talks to the other stuff inside
> -	  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
> -	  VESA. If you have PCI, say Y, otherwise N.
> -
>  config PCI_DOMAINS
>  	bool "Support for multiple PCI domains"
>  	depends on PCI
> @@ -1252,8 +1241,6 @@ config PCI_HOST_ITE8152
>  	default y
>  	select DMABOUNCE
>  
> -source "drivers/pci/Kconfig"
> -
>  source "drivers/pcmcia/Kconfig"
>  
>  endmenu
> diff --git a/arch/arm/mach-ks8695/Kconfig b/arch/arm/mach-ks8695/Kconfig
> index a545976bdbd6..b3185c05fffa 100644
> --- a/arch/arm/mach-ks8695/Kconfig
> +++ b/arch/arm/mach-ks8695/Kconfig
> @@ -4,7 +4,7 @@ menu "Kendin/Micrel KS8695 Implementations"
>  
>  config MACH_KS8695
>  	bool "KS8695 development board"
> -	select MIGHT_HAVE_PCI
> +	select HAVE_PCI
>  	help
>  	  Say 'Y' here if you want your kernel to run on the original
>  	  Kendin-Micrel KS8695 development board.
> @@ -52,7 +52,7 @@ config MACH_CM4002
>  
>  config MACH_CM4008
>  	bool "OpenGear CM4008"
> -	select MIGHT_HAVE_PCI
> +	select HAVE_PCI
>  	help
>  	  Say 'Y' here if you want your kernel to support the OpenGear
>  	  CM4008 Console Server. See http://www.opengear.com for more
> @@ -60,7 +60,7 @@ config MACH_CM4008
>  
>  config MACH_CM41xx
>  	bool "OpenGear CM41xx"
> -	select MIGHT_HAVE_PCI
> +	select HAVE_PCI
>  	help
>  	  Say 'Y' here if you want your kernel to support the OpenGear
>  	  CM4016 or CM4048 Console Servers. See http://www.opengear.com for
> @@ -68,7 +68,7 @@ config MACH_CM41xx
>  
>  config MACH_IM4004
>  	bool "OpenGear IM4004"
> -	select MIGHT_HAVE_PCI
> +	select HAVE_PCI
>  	help
>  	  Say 'Y' here if you want your kernel to support the OpenGear
>  	  IM4004 Secure Access Server. See http://www.opengear.com for
> @@ -76,7 +76,7 @@ config MACH_IM4004
>  
>  config MACH_IM42xx
>  	bool "OpenGear IM42xx"
> -	select MIGHT_HAVE_PCI
> +	select HAVE_PCI
>  	help
>  	  Say 'Y' here if you want your kernel to support the OpenGear
>  	  IM4216 or IM4248 Console Servers. See http://www.opengear.com for
> diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
> index a68b34183107..b185794549be 100644
> --- a/arch/arm/mach-pxa/Kconfig
> +++ b/arch/arm/mach-pxa/Kconfig
> @@ -125,7 +125,7 @@ config MACH_ARMCORE
>  	bool "CompuLab CM-X255/CM-X270 modules"
>  	select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI
>  	select IWMMXT
> -	select MIGHT_HAVE_PCI
> +	select HAVE_PCI
>  	select NEED_MACH_IO_H if PCI
>  	select PXA25x
>  	select PXA27x

This is wrong.  "MIGHT_HAVE_PCI" is _not_ the same as "HAVE_PCI" - we
have a bunch of platforms that mandatorily have PCI and these select
PCI directly.  "MIGHT_HAVE_PCI" controls the _visibility_ of the PCI
menu option, but does not prevent it being selected.  Your patch will
cause Kconfig to complain for those which mandatorily have PCI but
do not set HAVE_PCI.
Masahiro Yamada Oct. 19, 2018, 12:58 p.m. UTC | #2 
On Fri, Oct 19, 2018 at 9:23 PM Russell King - ARM Linux
<linux@armlinux.org.uk> wrote:

> > index a68b34183107..b185794549be 100644
> > --- a/arch/arm/mach-pxa/Kconfig
> > +++ b/arch/arm/mach-pxa/Kconfig
> > @@ -125,7 +125,7 @@ config MACH_ARMCORE
> >       bool "CompuLab CM-X255/CM-X270 modules"
> >       select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI
> >       select IWMMXT
> > -     select MIGHT_HAVE_PCI
> > +     select HAVE_PCI
> >       select NEED_MACH_IO_H if PCI
> >       select PXA25x
> >       select PXA27x
>
> This is wrong.  "MIGHT_HAVE_PCI" is _not_ the same as "HAVE_PCI" - we
> have a bunch of platforms that mandatorily have PCI and these select
> PCI directly.  "MIGHT_HAVE_PCI" controls the _visibility_ of the PCI
> menu option, but does not prevent it being selected.  Your patch will
> cause Kconfig to complain for those which mandatorily have PCI but
> do not set HAVE_PCI.


Good catch!
But, adding a bunch of 'select HAVE_PCI' along with 'select PCI' is ugly.

Do you have any suggestion?

How about letting CONFIG_ARM to select HAVE_PCI ?
Palmer Dabbelt Oct. 19, 2018, 6:18 p.m. UTC | #3 
On Fri, 19 Oct 2018 05:09:49 PDT (-0700), Christoph Hellwig wrote:
> There is no good reason to duplicate the PCI menu in every architecture.
> Instead provide a selectable HAVE_PCI symbol that indicates availability
> of PCI support and the handle the rest in drivers/pci.
>
> Note that for powerpc we now select HAVE_PCI globally instead of the
> convoluted mess of conditional or or non-conditional support per board,
> similar to what we do e.g. on x86.  For alpha PCI is selected for the
> non-jensen configs as it was the default before, and a lot of code does
> not compile without PCI enabled.  On other architectures with limited
> PCI support that wasn't as complicated I've left the selection as-is.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> Acked-by: Max Filippov <jcmvbkbc@gmail.com>
> Acked-by: Thomas Gleixner <tglx@linutronix.de>
> Acked-by: Bjorn Helgaas <bhelgaas@google.com>

...

> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> index a344980287a5..071952cd4cae 100644
> --- a/arch/riscv/Kconfig
> +++ b/arch/riscv/Kconfig
> @@ -39,8 +39,10 @@ config RISCV
>  	select SPARSE_IRQ
>  	select SYSCTL_EXCEPTION_TRACE
>  	select HAVE_ARCH_TRACEHOOK
> +	select HAVE_PCI
>  	select MODULES_USE_ELF_RELA if MODULES
>  	select THREAD_INFO_IN_TASK
> +	select PCI_MSI if PCI
>  	select RISCV_TIMER
>  	select GENERIC_IRQ_MULTI_HANDLER
>  	select ARCH_HAS_PTE_SPECIAL
> @@ -216,28 +218,12 @@ source "kernel/Kconfig.hz"
>
>  endmenu
>
> -menu "Bus support"
> -
> -config PCI
> -	bool "PCI support"
> -	select PCI_MSI
> -	help
> -	  This feature enables support for PCI bus system. If you say Y
> -	  here, the kernel will include drivers and infrastructure code
> -	  to support PCI bus devices.
> -
> -	  If you don't know what to do here, say Y.
> -
>  config PCI_DOMAINS
>  	def_bool PCI
>
>  config PCI_DOMAINS_GENERIC
>  	def_bool PCI
>
> -source "drivers/pci/Kconfig"
> -
> -endmenu
> -
>  menu "Power management options"
>
>  source kernel/power/Kconfig

Reviewed-by: Palmer Dabbelt <palmer@sifive.com>

I'm assuming this will go in via PCI tree of some sort, so I'm not going to 
touch it any further.

Thanks for cleaning this up!
Masahiro Yamada Oct. 31, 2018, 4:05 p.m. UTC | #4 
Hi Christoph,


On Fri, Oct 19, 2018 at 9:58 PM Masahiro Yamada
<yamada.masahiro@socionext.com> wrote:
>
> On Fri, Oct 19, 2018 at 9:23 PM Russell King - ARM Linux
> <linux@armlinux.org.uk> wrote:
>
> > > index a68b34183107..b185794549be 100644
> > > --- a/arch/arm/mach-pxa/Kconfig
> > > +++ b/arch/arm/mach-pxa/Kconfig
> > > @@ -125,7 +125,7 @@ config MACH_ARMCORE
> > >       bool "CompuLab CM-X255/CM-X270 modules"
> > >       select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI
> > >       select IWMMXT
> > > -     select MIGHT_HAVE_PCI
> > > +     select HAVE_PCI
> > >       select NEED_MACH_IO_H if PCI
> > >       select PXA25x
> > >       select PXA27x
> >
> > This is wrong.  "MIGHT_HAVE_PCI" is _not_ the same as "HAVE_PCI" - we
> > have a bunch of platforms that mandatorily have PCI and these select
> > PCI directly.  "MIGHT_HAVE_PCI" controls the _visibility_ of the PCI
> > menu option, but does not prevent it being selected.  Your patch will
> > cause Kconfig to complain for those which mandatorily have PCI but
> > do not set HAVE_PCI.
>
>
> Good catch!
> But, adding a bunch of 'select HAVE_PCI' along with 'select PCI' is ugly.
>
> Do you have any suggestion?
>
> How about letting CONFIG_ARM to select HAVE_PCI ?
>


I applied 1/9, 3/9, 4/9, 5/9.
(I think 2/9 should be squashed to 9/9)

As Russell pointed out, we need to avoid
the unmet dependency.


Are you planning to send
the updated version for 6/9 through - 9/9 ?

If so, could you please rebase 6/9
so that it is cleanly applicable ?


Thanks.


--
Best Regards
Masahiro Yamada
Christoph Hellwig Nov. 1, 2018, 5:48 a.m. UTC | #5 
On Thu, Nov 01, 2018 at 01:05:26AM +0900, Masahiro Yamada wrote:
> > How about letting CONFIG_ARM to select HAVE_PCI ?
> >
> 
> 
> I applied 1/9, 3/9, 4/9, 5/9.
> (I think 2/9 should be squashed to 9/9)
> 
> As Russell pointed out, we need to avoid
> the unmet dependency.

Yes, I think the HAVE_PCI is probably the nicest way, but we'll
need to wait what Russell as the maintainer wants.

> Are you planning to send
> the updated version for 6/9 through - 9/9 ?
> 
> If so, could you please rebase 6/9
> so that it is cleanly applicable ?

Will do once I find some time after rc1.
Russell King (Oracle) Nov. 1, 2018, 10:24 a.m. UTC | #6 
On Fri, Oct 19, 2018 at 09:58:46PM +0900, Masahiro Yamada wrote:
> On Fri, Oct 19, 2018 at 9:23 PM Russell King - ARM Linux
> <linux@armlinux.org.uk> wrote:
> 
> > > index a68b34183107..b185794549be 100644
> > > --- a/arch/arm/mach-pxa/Kconfig
> > > +++ b/arch/arm/mach-pxa/Kconfig
> > > @@ -125,7 +125,7 @@ config MACH_ARMCORE
> > >       bool "CompuLab CM-X255/CM-X270 modules"
> > >       select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI
> > >       select IWMMXT
> > > -     select MIGHT_HAVE_PCI
> > > +     select HAVE_PCI
> > >       select NEED_MACH_IO_H if PCI
> > >       select PXA25x
> > >       select PXA27x
> >
> > This is wrong.  "MIGHT_HAVE_PCI" is _not_ the same as "HAVE_PCI" - we
> > have a bunch of platforms that mandatorily have PCI and these select
> > PCI directly.  "MIGHT_HAVE_PCI" controls the _visibility_ of the PCI
> > menu option, but does not prevent it being selected.  Your patch will
> > cause Kconfig to complain for those which mandatorily have PCI but
> > do not set HAVE_PCI.
> 
> 
> Good catch!
> But, adding a bunch of 'select HAVE_PCI' along with 'select PCI' is ugly.
> 
> Do you have any suggestion?
> 
> How about letting CONFIG_ARM to select HAVE_PCI ?

Well, the situation we have on ARM is rather optimal - when the
rest of the configuration supports PCI, PCI is made visible.  When
there's no hardware support for PCI, PCI is hidden.  When PCI is
mandatory, PCI is selected and mostly always hidden.

It seems that with this consolidation, we lose that - we end up
with PCI being visible for every ARM config, not only those where
PCI is "impossible" but also for those where PCI is forcefully
selected.

That said, offering PCI for platforms that do not have any possibility
of PCI hardware shouldn't cause any compile issues, and would increase
build coverage - but I'd say it wouldn't _usefully_ increase build
coverage.
Bjorn Helgaas Nov. 8, 2018, 10:45 p.m. UTC | #7 
On Fri, Oct 19, 2018 at 02:09:49PM +0200, Christoph Hellwig wrote:
> There is no good reason to duplicate the PCI menu in every architecture.
> Instead provide a selectable HAVE_PCI symbol that indicates availability
> of PCI support and the handle the rest in drivers/pci.
> 
> Note that for powerpc we now select HAVE_PCI globally instead of the
> convoluted mess of conditional or or non-conditional support per board,
> similar to what we do e.g. on x86.  For alpha PCI is selected for the
> non-jensen configs as it was the default before, and a lot of code does
> not compile without PCI enabled.  On other architectures with limited
> PCI support that wasn't as complicated I've left the selection as-is.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> Acked-by: Max Filippov <jcmvbkbc@gmail.com>
> Acked-by: Thomas Gleixner <tglx@linutronix.de>
> Acked-by: Bjorn Helgaas <bhelgaas@google.com>

Sounds like Masahiro plans to take this series and I'm fine with that.
Minor typo below, since it sounds like there's another revision coming.

> --- a/drivers/pci/Kconfig
> +++ b/drivers/pci/Kconfig
> @@ -3,6 +3,18 @@
>  # PCI configuration
>  #
>  
> +config HAVE_PCI
> +	bool
> +
> +menuconfig PCI
> +	bool "PCI support"
> +	depends on HAVE_PCI
> +
> +	help
> +	  This option enables support for the PCI local bus, including
> +	  support for PCI-X and the fundations for PCI Express support.

s/fundations/foundations/

> +	  Say 'Y' here unless you know what you are doing.
> +
>  source "drivers/pci/pcie/Kconfig"
diff mbox series

Patch

diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 5b4f88363453..bb89924c0361 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -6,6 +6,8 @@  config ALPHA
 	select ARCH_MIGHT_HAVE_PC_SERIO
 	select ARCH_NO_PREEMPT
 	select ARCH_USE_CMPXCHG_LOCKREF
+	select HAVE_PCI if !ALPHA_JENSEN
+	select PCI if !ALPHA_JENSEN
 	select HAVE_AOUT
 	select HAVE_IDE
 	select HAVE_OPROFILE
@@ -15,6 +17,7 @@  config ALPHA
 	select NEED_SG_DMA_LENGTH
 	select VIRT_TO_BUS
 	select GENERIC_IRQ_PROBE
+	select GENERIC_PCI_IOMAP if PCI
 	select AUTO_IRQ_AFFINITY if SMP
 	select GENERIC_IRQ_SHOW
 	select ARCH_WANT_IPC_PARSE_VERSION
@@ -319,17 +322,6 @@  config ISA_DMA_API
 	bool
 	default y
 
-config PCI
-	bool
-	depends on !ALPHA_JENSEN
-	select GENERIC_PCI_IOMAP
-	default y
-	help
-	  Find out whether you have a PCI motherboard. PCI is the name of a
-	  bus system, i.e. the way the CPU talks to the other stuff inside
-	  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
-	  VESA. If you have PCI, say Y, otherwise N.
-
 config PCI_DOMAINS
 	bool
 	default y
@@ -681,7 +673,6 @@  config HZ
 	default 1200 if HZ_1200
 	default 1024
 
-source "drivers/pci/Kconfig"
 source "drivers/eisa/Kconfig"
 
 source "drivers/pcmcia/Kconfig"
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index a045f3086047..55a6953e9239 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -53,9 +53,6 @@  config ARC
 config ARCH_HAS_CACHE_LINE_SIZE
 	def_bool y
 
-config MIGHT_HAVE_PCI
-	bool
-
 config TRACE_IRQFLAGS_SUPPORT
 	def_bool y
 
@@ -555,24 +552,7 @@  config FORCE_MAX_ZONEORDER
 	default "12" if ARC_HUGEPAGE_16M
 	default "11"
 
-menu "Bus Support"
-
-config PCI
-	bool "PCI support" if MIGHT_HAVE_PCI
-	help
-	  PCI is the name of a bus system, i.e., the way the CPU talks to
-	  the other stuff inside your box.  Find out if your board/platform
-	  has PCI.
-
-	  Note: PCIe support for Synopsys Device will be available only
-	  when HAPS DX is configured with PCIe RC bitmap. If you have PCI,
-	  say Y, otherwise N.
-
 config PCI_SYSCALL
 	def_bool PCI
 
-source "drivers/pci/Kconfig"
-
-endmenu
-
 source "kernel/power/Kconfig"
diff --git a/arch/arc/plat-axs10x/Kconfig b/arch/arc/plat-axs10x/Kconfig
index 4e0df7b7a248..27b9eb97a6bf 100644
--- a/arch/arc/plat-axs10x/Kconfig
+++ b/arch/arc/plat-axs10x/Kconfig
@@ -11,7 +11,7 @@  menuconfig ARC_PLAT_AXS10X
 	select DW_APB_ICTL
 	select GPIO_DWAPB
 	select OF_GPIO
-	select MIGHT_HAVE_PCI
+	select HAVE_PCI
 	select GENERIC_IRQ_CHIP
 	select GPIOLIB
 	select AXS101 if ISA_ARCOMPACT
diff --git a/arch/arc/plat-hsdk/Kconfig b/arch/arc/plat-hsdk/Kconfig
index 9356753c2ed8..f25c085b9874 100644
--- a/arch/arc/plat-hsdk/Kconfig
+++ b/arch/arc/plat-hsdk/Kconfig
@@ -11,4 +11,4 @@  menuconfig ARC_SOC_HSDK
 	select ARC_HAS_ACCL_REGS
 	select CLK_HSDK
 	select RESET_HSDK
-	select MIGHT_HAVE_PCI
+	select HAVE_PCI
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e33735ce1c14..7495d0a0aa31 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -149,9 +149,6 @@  config ARM_DMA_IOMMU_ALIGNMENT
 
 endif
 
-config MIGHT_HAVE_PCI
-	bool
-
 config SYS_SUPPORTS_APM_EMULATION
 	bool
 
@@ -320,7 +317,7 @@  config ARCH_MULTIPLATFORM
 	select COMMON_CLK
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_MULTI_HANDLER
-	select MIGHT_HAVE_PCI
+	select HAVE_PCI
 	select PCI_DOMAINS if PCI
 	select SPARSE_IRQ
 	select USE_OF
@@ -436,7 +433,7 @@  config ARCH_IXP4XX
 	select DMABOUNCE if PCI
 	select GENERIC_CLOCKEVENTS
 	select GPIOLIB
-	select MIGHT_HAVE_PCI
+	select HAVE_PCI
 	select NEED_MACH_IO_H
 	select USB_EHCI_BIG_ENDIAN_DESC
 	select USB_EHCI_BIG_ENDIAN_MMIO
@@ -449,7 +446,7 @@  config ARCH_DOVE
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_MULTI_HANDLER
 	select GPIOLIB
-	select MIGHT_HAVE_PCI
+	select HAVE_PCI
 	select MVEBU_MBUS
 	select PINCTRL
 	select PINCTRL_DOVE
@@ -1216,14 +1213,6 @@  config ISA_DMA
 config ISA_DMA_API
 	bool
 
-config PCI
-	bool "PCI support" if MIGHT_HAVE_PCI
-	help
-	  Find out whether you have a PCI motherboard. PCI is the name of a
-	  bus system, i.e. the way the CPU talks to the other stuff inside
-	  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
-	  VESA. If you have PCI, say Y, otherwise N.
-
 config PCI_DOMAINS
 	bool "Support for multiple PCI domains"
 	depends on PCI
@@ -1252,8 +1241,6 @@  config PCI_HOST_ITE8152
 	default y
 	select DMABOUNCE
 
-source "drivers/pci/Kconfig"
-
 source "drivers/pcmcia/Kconfig"
 
 endmenu
diff --git a/arch/arm/mach-ks8695/Kconfig b/arch/arm/mach-ks8695/Kconfig
index a545976bdbd6..b3185c05fffa 100644
--- a/arch/arm/mach-ks8695/Kconfig
+++ b/arch/arm/mach-ks8695/Kconfig
@@ -4,7 +4,7 @@  menu "Kendin/Micrel KS8695 Implementations"
 
 config MACH_KS8695
 	bool "KS8695 development board"
-	select MIGHT_HAVE_PCI
+	select HAVE_PCI
 	help
 	  Say 'Y' here if you want your kernel to run on the original
 	  Kendin-Micrel KS8695 development board.
@@ -52,7 +52,7 @@  config MACH_CM4002
 
 config MACH_CM4008
 	bool "OpenGear CM4008"
-	select MIGHT_HAVE_PCI
+	select HAVE_PCI
 	help
 	  Say 'Y' here if you want your kernel to support the OpenGear
 	  CM4008 Console Server. See http://www.opengear.com for more
@@ -60,7 +60,7 @@  config MACH_CM4008
 
 config MACH_CM41xx
 	bool "OpenGear CM41xx"
-	select MIGHT_HAVE_PCI
+	select HAVE_PCI
 	help
 	  Say 'Y' here if you want your kernel to support the OpenGear
 	  CM4016 or CM4048 Console Servers. See http://www.opengear.com for
@@ -68,7 +68,7 @@  config MACH_CM41xx
 
 config MACH_IM4004
 	bool "OpenGear IM4004"
-	select MIGHT_HAVE_PCI
+	select HAVE_PCI
 	help
 	  Say 'Y' here if you want your kernel to support the OpenGear
 	  IM4004 Secure Access Server. See http://www.opengear.com for
@@ -76,7 +76,7 @@  config MACH_IM4004
 
 config MACH_IM42xx
 	bool "OpenGear IM42xx"
-	select MIGHT_HAVE_PCI
+	select HAVE_PCI
 	help
 	  Say 'Y' here if you want your kernel to support the OpenGear
 	  IM4216 or IM4248 Console Servers. See http://www.opengear.com for
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index a68b34183107..b185794549be 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -125,7 +125,7 @@  config MACH_ARMCORE
 	bool "CompuLab CM-X255/CM-X270 modules"
 	select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI
 	select IWMMXT
-	select MIGHT_HAVE_PCI
+	select HAVE_PCI
 	select NEED_MACH_IO_H if PCI
 	select PXA25x
 	select PXA27x
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 1b1a0e95c751..ae0f1ef0a748 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -98,6 +98,7 @@  config ARM64
 	select GENERIC_TIME_VSYSCALL
 	select HANDLE_DOMAIN_IRQ
 	select HARDIRQS_SW_RESEND
+	select HAVE_PCI
 	select HAVE_ACPI_APEI if (ACPI && EFI)
 	select HAVE_ALIGNED_STRUCT_PAGE if SLUB
 	select HAVE_ARCH_AUDITSYSCALL
@@ -284,13 +285,6 @@  source "arch/arm64/Kconfig.platforms"
 
 menu "Bus support"
 
-config PCI
-	bool "PCI support"
-	help
-	  This feature enables support for PCI bus system. If you say Y
-	  here, the kernel will include drivers and infrastructure code
-	  to support PCI bus devices.
-
 config PCI_DOMAINS
 	def_bool PCI
 
@@ -300,8 +294,6 @@  config PCI_DOMAINS_GENERIC
 config PCI_SYSCALL
 	def_bool PCI
 
-source "drivers/pci/Kconfig"
-
 endmenu
 
 menu "Kernel Features"
diff --git a/arch/hexagon/Kconfig b/arch/hexagon/Kconfig
index 89a4b22f34d9..1bc856c61ed8 100644
--- a/arch/hexagon/Kconfig
+++ b/arch/hexagon/Kconfig
@@ -44,9 +44,6 @@  config FRAME_POINTER
 config LOCKDEP_SUPPORT
 	def_bool y
 
-config PCI
-	def_bool n
-
 config EARLY_PRINTK
 	def_bool y
 
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 8b4a0c1748c0..89da763d7c17 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -51,6 +51,7 @@  config IA64
 	select MODULES_USE_ELF_RELA
 	select ARCH_USE_CMPXCHG_LOCKREF
 	select HAVE_ARCH_AUDITSYSCALL
+	select HAVE_PCI if !IA64_HP_SIM
 	select NEED_DMA_MAP_STATE
 	select NEED_SG_DMA_LENGTH
 	default y
@@ -546,20 +547,12 @@  if !IA64_HP_SIM
 
 menu "Bus options (PCI, PCMCIA)"
 
-config PCI
-	bool "PCI support"
-	help
-	  Real IA-64 machines all have PCI/PCI-X/PCI Express busses.  Say Y
-	  here unless you are using a simulator without PCI support.
-
 config PCI_DOMAINS
 	def_bool PCI
 
 config PCI_SYSCALL
 	def_bool PCI
 
-source "drivers/pci/Kconfig"
-
 source "drivers/pcmcia/Kconfig"
 
 endmenu
diff --git a/arch/m68k/Kconfig.bus b/arch/m68k/Kconfig.bus
index aef698fa50e5..8cb0604b195b 100644
--- a/arch/m68k/Kconfig.bus
+++ b/arch/m68k/Kconfig.bus
@@ -63,17 +63,6 @@  source "drivers/zorro/Kconfig"
 
 endif
 
-config PCI
-	bool "PCI support"
-	depends on M54xx
-	help
-	  Enable the PCI bus. Support for the PCI bus hardware built into the
-	  ColdFire 547x and 548x processors.
-
-if PCI
-source "drivers/pci/Kconfig"
-endif
-
 if !MMU
 
 config ISA_DMA_API
diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu
index 21f00349af52..60ac1cd8b96f 100644
--- a/arch/m68k/Kconfig.cpu
+++ b/arch/m68k/Kconfig.cpu
@@ -299,6 +299,7 @@  config M53xx
 	bool
 
 config M54xx
+	select HAVE_PCI
 	bool
 
 endif # COLDFIRE
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index ace5c5bf1836..3d352862db30 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -32,6 +32,7 @@  config MICROBLAZE
 	select HAVE_MEMBLOCK
 	select HAVE_MEMBLOCK_NODE_MAP
 	select HAVE_OPROFILE
+	select HAVE_PCI
 	select IRQ_DOMAIN
 	select XILINX_INTC
 	select MODULES_USE_ELF_RELA
@@ -268,9 +269,6 @@  endmenu
 
 menu "Bus Options"
 
-config PCI
-	bool "PCI support"
-
 config PCI_DOMAINS
 	def_bool PCI
 
@@ -284,6 +282,4 @@  config PCI_XILINX
 	bool "Xilinx PCI host bridge support"
 	depends on PCI
 
-source "drivers/pci/Kconfig"
-
 endmenu
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 35511999156a..09b93d5a55cb 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -74,6 +74,7 @@  config MIPS
 	select IRQ_FORCED_THREADING
 	select MODULES_USE_ELF_RELA if MODULES && 64BIT
 	select MODULES_USE_ELF_REL if MODULES
+	select PCI_DOMAINS if PCI
 	select PERF_USE_VMALLOC
 	select RTC_LIB if !MACH_LOONGSON64
 	select SYSCTL_EXCEPTION_TRACE
@@ -96,7 +97,7 @@  config MIPS_GENERIC
 	select CPU_MIPSR2_IRQ_EI
 	select CSRC_R4K
 	select DMA_PERDEV_COHERENT
-	select HW_HAS_PCI
+	select HAVE_PCI
 	select IRQ_MIPS_CPU
 	select LIBFDT
 	select MIPS_AUTO_PFN_OFFSET
@@ -256,7 +257,7 @@  config BCM47XX
 	select CEVT_R4K
 	select CSRC_R4K
 	select DMA_NONCOHERENT
-	select HW_HAS_PCI
+	select HAVE_PCI
 	select IRQ_MIPS_CPU
 	select SYS_HAS_CPU_MIPS32_R1
 	select NO_EXCEPT_FILL
@@ -299,7 +300,7 @@  config MIPS_COBALT
 	select CSRC_R4K
 	select CEVT_GT641XX
 	select DMA_NONCOHERENT
-	select HW_HAS_PCI
+	select HAVE_PCI
 	select I8253
 	select I8259
 	select IRQ_MIPS_CPU
@@ -422,7 +423,7 @@  config LASAT
 	select CSRC_R4K
 	select DMA_NONCOHERENT
 	select SYS_HAS_EARLY_PRINTK
-	select HW_HAS_PCI
+	select HAVE_PCI
 	select IRQ_MIPS_CPU
 	select PCI_GT64XXX_PCI0
 	select MIPS_NILE4
@@ -502,7 +503,7 @@  config MIPS_MALTA
 	select HAVE_PCSPKR_PLATFORM
 	select IRQ_MIPS_CPU
 	select MIPS_GIC
-	select HW_HAS_PCI
+	select HAVE_PCI
 	select I8253
 	select I8259
 	select MIPS_BONITO64
@@ -556,7 +557,7 @@  config MACH_PIC32
 config NEC_MARKEINS
 	bool "NEC EMMA2RH Mark-eins board"
 	select SOC_EMMA2RH
-	select HW_HAS_PCI
+	select HAVE_PCI
 	help
 	  This enables support for the NEC Electronics Mark-eins boards.
 
@@ -673,7 +674,7 @@  config SGI_IP27
 	select BOOT_ELF64
 	select DEFAULT_SGI_PARTITION
 	select SYS_HAS_EARLY_PRINTK
-	select HW_HAS_PCI
+	select HAVE_PCI
 	select NR_CPUS_DEFAULT_64
 	select SYS_HAS_CPU_R10000
 	select SYS_SUPPORTS_64BIT_KERNEL
@@ -733,7 +734,7 @@  config SGI_IP32
 	select CEVT_R4K
 	select CSRC_R4K
 	select DMA_NONCOHERENT
-	select HW_HAS_PCI
+	select HAVE_PCI
 	select IRQ_MIPS_CPU
 	select R5000_CPU_SCACHE
 	select RM7000_CPU_SCACHE
@@ -843,7 +844,7 @@  config SNI_RM
 	select GENERIC_ISA_DMA
 	select HAVE_PCSPKR_PLATFORM
 	select HW_HAS_EISA
-	select HW_HAS_PCI
+	select HAVE_PCI
 	select IRQ_MIPS_CPU
 	select I8253
 	select I8259
@@ -876,7 +877,7 @@  config MIKROTIK_RB532
 	select CEVT_R4K
 	select CSRC_R4K
 	select DMA_NONCOHERENT
-	select HW_HAS_PCI
+	select HAVE_PCI
 	select IRQ_MIPS_CPU
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_SUPPORTS_32BIT_KERNEL
@@ -903,7 +904,7 @@  config CAVIUM_OCTEON_SOC
 	select SYS_SUPPORTS_HOTPLUG_CPU if CPU_BIG_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
 	select SYS_HAS_CPU_CAVIUM_OCTEON
-	select HW_HAS_PCI
+	select HAVE_PCI
 	select ZONE_DMA32
 	select HOLES_IN_ZONE
 	select GPIOLIB
@@ -936,7 +937,7 @@  config NLM_XLR_BOARD
 	select NLM_COMMON
 	select SYS_HAS_CPU_XLR
 	select SYS_SUPPORTS_SMP
-	select HW_HAS_PCI
+	select HAVE_PCI
 	select SWAP_IO_SPACE
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
@@ -962,7 +963,7 @@  config NLM_XLP_BOARD
 	select NLM_COMMON
 	select SYS_HAS_CPU_XLP
 	select SYS_SUPPORTS_SMP
-	select HW_HAS_PCI
+	select HAVE_PCI
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select PHYS_ADDR_T_64BIT
@@ -997,7 +998,7 @@  config MIPS_PARAVIRT
 	select SYS_HAS_CPU_MIPS32_R2
 	select SYS_HAS_CPU_MIPS64_R2
 	select SYS_HAS_CPU_CAVIUM_OCTEON
-	select HW_HAS_PCI
+	select HAVE_PCI
 	select SWAP_IO_SPACE
 	help
 	  This option supports guest running under ????
@@ -2992,18 +2993,6 @@  menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)"
 
 config HW_HAS_EISA
 	bool
-config HW_HAS_PCI
-	bool
-
-config PCI
-	bool "Support for PCI controller"
-	depends on HW_HAS_PCI
-	select PCI_DOMAINS
-	help
-	  Find out whether you have a PCI motherboard. PCI is the name of a
-	  bus system, i.e. the way the CPU talks to the other stuff inside
-	  your box. Other bus systems are ISA, EISA, or VESA. If you have PCI,
-	  say Y, otherwise N.
 
 config HT_PCI
 	bool "Support for HT-linked PCI"
@@ -3030,8 +3019,6 @@  config PCI_DRIVERS_LEGACY
 	def_bool !PCI_DRIVERS_GENERIC
 	select NO_GENERIC_PCI_IOPORT_MAP
 
-source "drivers/pci/Kconfig"
-
 #
 # ISA support is now enabled via select.  Too many systems still have the one
 # or other ISA chip on the board that users don't know about so don't expect
diff --git a/arch/mips/alchemy/Kconfig b/arch/mips/alchemy/Kconfig
index 7d73f7f4202b..83b288b95b16 100644
--- a/arch/mips/alchemy/Kconfig
+++ b/arch/mips/alchemy/Kconfig
@@ -14,7 +14,7 @@  choice
 
 config MIPS_MTX1
 	bool "4G Systems MTX-1 board"
-	select HW_HAS_PCI
+	select HAVE_PCI
 	select ALCHEMY_GPIOINT_AU1000
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
@@ -22,7 +22,7 @@  config MIPS_MTX1
 config MIPS_DB1XXX
 	bool "Alchemy DB1XXX / PB1XXX boards"
 	select GPIOLIB
-	select HW_HAS_PCI
+	select HAVE_PCI
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
 	help
@@ -40,7 +40,7 @@  config MIPS_XXS1500
 config MIPS_GPR
 	bool "Trapeze ITS GPR board"
 	select ALCHEMY_GPIOINT_AU1000
-	select HW_HAS_PCI
+	select HAVE_PCI
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
 
diff --git a/arch/mips/ath25/Kconfig b/arch/mips/ath25/Kconfig
index 2c1dfd06c366..4c1b4579c814 100644
--- a/arch/mips/ath25/Kconfig
+++ b/arch/mips/ath25/Kconfig
@@ -13,6 +13,6 @@  config PCI_AR2315
 	bool "Atheros AR2315 PCI controller support"
 	depends on SOC_AR2315
 	select ARCH_HAS_PHYS_TO_DMA
-	select HW_HAS_PCI
+	select HAVE_PCI
 	select PCI
 	default y
diff --git a/arch/mips/ath79/Kconfig b/arch/mips/ath79/Kconfig
index 9547cf1ea38d..191c3910eac5 100644
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -75,11 +75,11 @@  config ATH79_MACH_UBNT_XM
 endmenu
 
 config SOC_AR71XX
-	select HW_HAS_PCI
+	select HAVE_PCI
 	def_bool n
 
 config SOC_AR724X
-	select HW_HAS_PCI
+	select HAVE_PCI
 	select PCI_AR724X if PCI
 	def_bool n
 
@@ -90,12 +90,12 @@  config SOC_AR933X
 	def_bool n
 
 config SOC_AR934X
-	select HW_HAS_PCI
+	select HAVE_PCI
 	select PCI_AR724X if PCI
 	def_bool n
 
 config SOC_QCA955X
-	select HW_HAS_PCI
+	select HAVE_PCI
 	select PCI_AR724X if PCI
 	def_bool n
 
diff --git a/arch/mips/bcm63xx/Kconfig b/arch/mips/bcm63xx/Kconfig
index 96ed735a4f4a..837f6e5a2f37 100644
--- a/arch/mips/bcm63xx/Kconfig
+++ b/arch/mips/bcm63xx/Kconfig
@@ -5,17 +5,17 @@  menu "CPU support"
 config BCM63XX_CPU_3368
 	bool "support 3368 CPU"
 	select SYS_HAS_CPU_BMIPS4350
-	select HW_HAS_PCI
+	select HAVE_PCI
 
 config BCM63XX_CPU_6328
 	bool "support 6328 CPU"
 	select SYS_HAS_CPU_BMIPS4350
-	select HW_HAS_PCI
+	select HAVE_PCI
 
 config BCM63XX_CPU_6338
 	bool "support 6338 CPU"
 	select SYS_HAS_CPU_BMIPS32_3300
-	select HW_HAS_PCI
+	select HAVE_PCI
 
 config BCM63XX_CPU_6345
 	bool "support 6345 CPU"
@@ -24,22 +24,22 @@  config BCM63XX_CPU_6345
 config BCM63XX_CPU_6348
 	bool "support 6348 CPU"
 	select SYS_HAS_CPU_BMIPS32_3300
-	select HW_HAS_PCI
+	select HAVE_PCI
 
 config BCM63XX_CPU_6358
 	bool "support 6358 CPU"
 	select SYS_HAS_CPU_BMIPS4350
-	select HW_HAS_PCI
+	select HAVE_PCI
 
 config BCM63XX_CPU_6362
 	bool "support 6362 CPU"
 	select SYS_HAS_CPU_BMIPS4350
-	select HW_HAS_PCI
+	select HAVE_PCI
 
 config BCM63XX_CPU_6368
 	bool "support 6368 CPU"
 	select SYS_HAS_CPU_BMIPS4350
-	select HW_HAS_PCI
+	select HAVE_PCI
 endmenu
 
 source "arch/mips/bcm63xx/boards/Kconfig"
diff --git a/arch/mips/lantiq/Kconfig b/arch/mips/lantiq/Kconfig
index 8e3a1fc2bc39..188de95d6dbd 100644
--- a/arch/mips/lantiq/Kconfig
+++ b/arch/mips/lantiq/Kconfig
@@ -19,7 +19,7 @@  config SOC_AMAZON_SE
 config SOC_XWAY
 	bool "XWAY"
 	select SOC_TYPE_XWAY
-	select HW_HAS_PCI
+	select HAVE_PCI
 	select MFD_SYSCON
 	select MFD_CORE
 
diff --git a/arch/mips/loongson64/Kconfig b/arch/mips/loongson64/Kconfig
index c865b4b9b775..edd23dc4589d 100644
--- a/arch/mips/loongson64/Kconfig
+++ b/arch/mips/loongson64/Kconfig
@@ -15,7 +15,7 @@  config LEMOTE_FULOONG2E
 	select DMA_NONCOHERENT
 	select BOOT_ELF32
 	select BOARD_SCACHE
-	select HW_HAS_PCI
+	select HAVE_PCI
 	select I8259
 	select ISA
 	select IRQ_MIPS_CPU
@@ -46,7 +46,7 @@  config LEMOTE_MACH2F
 	select DMA_NONCOHERENT
 	select GENERIC_ISA_DMA_SUPPORT_BROKEN
 	select HAVE_CLK
-	select HW_HAS_PCI
+	select HAVE_PCI
 	select I8259
 	select IRQ_MIPS_CPU
 	select ISA
@@ -74,7 +74,7 @@  config LOONGSON_MACH3X
 	select CSRC_R4K
 	select CEVT_R4K
 	select CPU_HAS_WB
-	select HW_HAS_PCI
+	select HAVE_PCI
 	select ISA
 	select HT_PCI
 	select I8259
diff --git a/arch/mips/pmcs-msp71xx/Kconfig b/arch/mips/pmcs-msp71xx/Kconfig
index d319bc0c3df6..b185b7620c97 100644
--- a/arch/mips/pmcs-msp71xx/Kconfig
+++ b/arch/mips/pmcs-msp71xx/Kconfig
@@ -6,25 +6,25 @@  choice
 config PMC_MSP4200_EVAL
 	bool "PMC-Sierra MSP4200 Eval Board"
 	select IRQ_MSP_SLP
-	select HW_HAS_PCI
+	select HAVE_PCI
 	select MIPS_L1_CACHE_SHIFT_4
 
 config PMC_MSP4200_GW
 	bool "PMC-Sierra MSP4200 VoIP Gateway"
 	select IRQ_MSP_SLP
-	select HW_HAS_PCI
+	select HAVE_PCI
 
 config PMC_MSP7120_EVAL
 	bool "PMC-Sierra MSP7120 Eval Board"
 	select SYS_SUPPORTS_MULTITHREADING
 	select IRQ_MSP_CIC
-	select HW_HAS_PCI
+	select HAVE_PCI
 
 config PMC_MSP7120_GW
 	bool "PMC-Sierra MSP7120 Residential Gateway"
 	select SYS_SUPPORTS_MULTITHREADING
 	select IRQ_MSP_CIC
-	select HW_HAS_PCI
+	select HAVE_PCI
 	select MSP_HAS_USB
 	select MSP_ETH
 
@@ -32,7 +32,7 @@  config PMC_MSP7120_FPGA
 	bool "PMC-Sierra MSP7120 FPGA"
 	select SYS_SUPPORTS_MULTITHREADING
 	select IRQ_MSP_CIC
-	select HW_HAS_PCI
+	select HAVE_PCI
 
 endchoice
 
diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
index 1f9cb0e3c79a..4c8006b4a5f7 100644
--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -27,18 +27,18 @@  choice
 	config SOC_RT288X
 		bool "RT288x"
 		select MIPS_L1_CACHE_SHIFT_4
-		select HW_HAS_PCI
+		select HAVE_PCI
 
 	config SOC_RT305X
 		bool "RT305x"
 
 	config SOC_RT3883
 		bool "RT3883"
-		select HW_HAS_PCI
+		select HAVE_PCI
 
 	config SOC_MT7620
 		bool "MT7620/8"
-		select HW_HAS_PCI
+		select HAVE_PCI
 
 	config SOC_MT7621
 		bool "MT7621"
@@ -50,7 +50,7 @@  choice
 		select MIPS_GIC
 		select COMMON_CLK
 		select CLKSRC_MIPS_GIC
-		select HW_HAS_PCI
+		select HAVE_PCI
 endchoice
 
 choice
diff --git a/arch/mips/sibyte/Kconfig b/arch/mips/sibyte/Kconfig
index 7ec278d72096..470d46183677 100644
--- a/arch/mips/sibyte/Kconfig
+++ b/arch/mips/sibyte/Kconfig
@@ -3,7 +3,7 @@  config SIBYTE_SB1250
 	bool
 	select CEVT_SB1250
 	select CSRC_SB1250
-	select HW_HAS_PCI
+	select HAVE_PCI
 	select IRQ_MIPS_CPU
 	select SIBYTE_ENABLE_LDT_IF_PCI
 	select SIBYTE_HAS_ZBUS_PROFILING
@@ -23,7 +23,7 @@  config SIBYTE_BCM1125
 	bool
 	select CEVT_SB1250
 	select CSRC_SB1250
-	select HW_HAS_PCI
+	select HAVE_PCI
 	select IRQ_MIPS_CPU
 	select SIBYTE_BCM112X
 	select SIBYTE_HAS_ZBUS_PROFILING
@@ -33,7 +33,7 @@  config SIBYTE_BCM1125H
 	bool
 	select CEVT_SB1250
 	select CSRC_SB1250
-	select HW_HAS_PCI
+	select HAVE_PCI
 	select IRQ_MIPS_CPU
 	select SIBYTE_BCM112X
 	select SIBYTE_ENABLE_LDT_IF_PCI
@@ -52,7 +52,7 @@  config SIBYTE_BCM1x80
 	bool
 	select CEVT_BCM1480
 	select CSRC_BCM1480
-	select HW_HAS_PCI
+	select HAVE_PCI
 	select IRQ_MIPS_CPU
 	select SIBYTE_HAS_ZBUS_PROFILING
 	select SIBYTE_SB1xxx_SOC
@@ -62,7 +62,7 @@  config SIBYTE_BCM1x55
 	bool
 	select CEVT_BCM1480
 	select CSRC_BCM1480
-	select HW_HAS_PCI
+	select HAVE_PCI
 	select IRQ_MIPS_CPU
 	select SIBYTE_SB1xxx_SOC
 	select SIBYTE_HAS_ZBUS_PROFILING
diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig
index d2509c93f0ee..9a22a182b7a4 100644
--- a/arch/mips/txx9/Kconfig
+++ b/arch/mips/txx9/Kconfig
@@ -59,7 +59,7 @@  config SOC_TX3927
 	bool
 	select CEVT_TXX9
 	select HAS_TXX9_SERIAL
-	select HW_HAS_PCI
+	select HAVE_PCI
 	select IRQ_TXX9
 	select GPIO_TXX9
 
@@ -67,7 +67,7 @@  config SOC_TX4927
 	bool
 	select CEVT_TXX9
 	select HAS_TXX9_SERIAL
-	select HW_HAS_PCI
+	select HAVE_PCI
 	select IRQ_TXX9
 	select PCI_TX4927
 	select GPIO_TXX9
@@ -77,7 +77,7 @@  config SOC_TX4938
 	bool
 	select CEVT_TXX9
 	select HAS_TXX9_SERIAL
-	select HW_HAS_PCI
+	select HAVE_PCI
 	select IRQ_TXX9
 	select PCI_TX4927
 	select GPIO_TXX9
@@ -87,7 +87,7 @@  config SOC_TX4939
 	bool
 	select CEVT_TXX9
 	select HAS_TXX9_SERIAL
-	select HW_HAS_PCI
+	select HAVE_PCI
 	select PCI_TX4927
 	select HAS_TXX9_ACLC
 
diff --git a/arch/mips/vr41xx/Kconfig b/arch/mips/vr41xx/Kconfig
index 992c988b83b0..e0b651db371d 100644
--- a/arch/mips/vr41xx/Kconfig
+++ b/arch/mips/vr41xx/Kconfig
@@ -30,7 +30,7 @@  config TANBAC_TB022X
 	select CSRC_R4K
 	select DMA_NONCOHERENT
 	select IRQ_MIPS_CPU
-	select HW_HAS_PCI
+	select HAVE_PCI
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	help
@@ -46,7 +46,7 @@  config VICTOR_MPC30X
 	select CSRC_R4K
 	select DMA_NONCOHERENT
 	select IRQ_MIPS_CPU
-	select HW_HAS_PCI
+	select HAVE_PCI
 	select PCI_VR41XX
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
@@ -57,7 +57,7 @@  config ZAO_CAPCELLA
 	select CSRC_R4K
 	select DMA_NONCOHERENT
 	select IRQ_MIPS_CPU
-	select HW_HAS_PCI
+	select HAVE_PCI
 	select PCI_VR41XX
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
@@ -99,6 +99,6 @@  endchoice
 
 config PCI_VR41XX
 	bool "Add PCI control unit support of NEC VR4100 series"
-	depends on MACH_VR41XX && HW_HAS_PCI
+	depends on MACH_VR41XX && HAVE_PCI
 	default y
 	select PCI
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index 8e6d83f79e72..b2b08ad9f411 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -19,6 +19,7 @@  config PARISC
 	select NO_BOOTMEM
 	select BUG
 	select BUILDTIME_EXTABLE_SORT
+	select HAVE_PCI
 	select HAVE_PERF_EVENTS
 	select HAVE_KERNEL_BZIP2
 	select HAVE_KERNEL_GZIP
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index d4e97469a5f0..086d78c7c2c8 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -168,6 +168,7 @@  config PPC
 	select GENERIC_CPU_VULNERABILITIES	if PPC_BARRIER_NOSPEC
 	select GENERIC_IRQ_SHOW
 	select GENERIC_IRQ_SHOW_LEVEL
+	select GENERIC_PCI_IOMAP		if PCI
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_STRNCPY_FROM_USER
 	select GENERIC_STRNLEN_USER
@@ -190,6 +191,11 @@  config PPC
 	select HAVE_FTRACE_MCOUNT_RECORD
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_FUNCTION_TRACER
+	# Platforms that what PCI turned unconditionally just do select PCI
+	# in their config node, otherwise allow the user to enable it.
+	# This means we can enable PCI even on platforms that don't support
+	# it, which is harmless except for wasted memory.
+	select HAVE_PCI
 	select HAVE_GCC_PLUGINS			if GCC_VERSION >= 50200   # plugin support on gcc <= 5.1 is buggy on PPC
 	select HAVE_GENERIC_GUP
 	select HAVE_HW_BREAKPOINT		if PERF_EVENTS && (PPC_BOOK3S || PPC_8xx)
@@ -941,23 +947,6 @@  config FSL_GTM
 	help
 	  Freescale General-purpose Timers support
 
-# Platforms that what PCI turned unconditionally just do select PCI
-# in their config node.  Platforms that want to choose at config
-# time should select PPC_PCI_CHOICE
-config PPC_PCI_CHOICE
-	bool
-
-config PCI
-	bool "PCI support" if PPC_PCI_CHOICE
-	default y if !40x && !CPM2 && !PPC_8xx && !PPC_83xx \
-		&& !PPC_85xx && !PPC_86xx && !GAMECUBE_COMMON
-	select GENERIC_PCI_IOMAP
-	help
-	  Find out whether your system includes a PCI bus. PCI is the name of
-	  a bus system, i.e. the way the CPU talks to the other stuff inside
-	  your box.  If you say Y here, the kernel will include drivers and
-	  infrastructure code to support PCI bus devices.
-
 config PCI_DOMAINS
 	def_bool PCI
 
@@ -970,8 +959,6 @@  config PCI_8260
 	select PPC_INDIRECT_PCI
 	default y
 
-source "drivers/pci/Kconfig"
-
 source "drivers/pcmcia/Kconfig"
 
 config HAS_RAPIDIO
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index 70856a213663..9c6c77984ac3 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -272,7 +272,6 @@  config XILINX_VIRTEX440_GENERIC_BOARD
 config XILINX_ML510
 	bool "Xilinx ML510 extra support"
 	depends on XILINX_VIRTEX440_GENERIC_BOARD
-	select PPC_PCI_CHOICE
 	select XILINX_PCI if PCI
 	select PPC_INDIRECT_PCI if PCI
 	select PPC_I8259 if PCI
diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig
index b59eab6cbb1b..3639a2a89eb4 100644
--- a/arch/powerpc/platforms/512x/Kconfig
+++ b/arch/powerpc/platforms/512x/Kconfig
@@ -5,7 +5,6 @@  config PPC_MPC512x
 	select COMMON_CLK
 	select FSL_SOC
 	select IPIC
-	select PPC_PCI_CHOICE
 	select FSL_PCI if PCI
 	select USB_EHCI_BIG_ENDIAN_MMIO if USB_EHCI_HCD
 	select USB_EHCI_BIG_ENDIAN_DESC if USB_EHCI_HCD
diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig
index 55a587070342..121235b25305 100644
--- a/arch/powerpc/platforms/52xx/Kconfig
+++ b/arch/powerpc/platforms/52xx/Kconfig
@@ -3,7 +3,6 @@  config PPC_MPC52xx
 	bool "52xx-based boards"
 	depends on 6xx
 	select COMMON_CLK
-	select PPC_PCI_CHOICE
 
 config PPC_MPC5200_SIMPLE
 	bool "Generic support for simple MPC5200 based boards"
diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig
index 071f53b0c0a0..8f65ec7feb06 100644
--- a/arch/powerpc/platforms/83xx/Kconfig
+++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -3,7 +3,6 @@  menuconfig PPC_83xx
 	bool "83xx-based boards"
 	depends on 6xx
 	select PPC_UDBG_16550
-	select PPC_PCI_CHOICE
 	select FSL_PCI if PCI
 	select FSL_SOC
 	select IPIC
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 68920d42b4bc..20867a23f3f2 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -5,7 +5,6 @@  menuconfig FSL_SOC_BOOKE
 	select FSL_SOC
 	select PPC_UDBG_16550
 	select MPIC
-	select PPC_PCI_CHOICE
 	select FSL_PCI if PCI
 	select SERIAL_8250_EXTENDED if SERIAL_8250
 	select SERIAL_8250_SHARE_IRQ if SERIAL_8250
diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index bcd179d3ed92..87220554dd6f 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -70,7 +70,6 @@  endif
 
 config MPC8641
 	bool
-	select PPC_PCI_CHOICE
 	select FSL_PCI if PCI
 	select PPC_UDBG_16550
 	select MPIC
@@ -79,7 +78,6 @@  config MPC8641
 
 config MPC8610
 	bool
-	select PPC_PCI_CHOICE
 	select FSL_PCI if PCI
 	select PPC_UDBG_16550
 	select MPIC
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 14ef17e10ec9..2d28af3681e8 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -285,7 +285,6 @@  config CPM2
 	bool "Enable support for the CPM2 (Communications Processor Module)"
 	depends on (FSL_SOC_BOOKE && PPC32) || 8260
 	select CPM
-	select PPC_PCI_CHOICE
 	select GPIOLIB
 	help
 	  The CPM2 (Communications Processor Module) is a coprocessor on
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 6c6a7c72cae4..c89500c0747a 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -40,14 +40,12 @@  config 40x
 	select PPC_DCR_NATIVE
 	select PPC_UDBG_16550
 	select 4xx_SOC
-	select PPC_PCI_CHOICE
 
 config 44x
 	bool "AMCC 44x, 46x or 47x"
 	select PPC_DCR_NATIVE
 	select PPC_UDBG_16550
 	select 4xx_SOC
-	select PPC_PCI_CHOICE
 	select PHYS_64BIT
 
 config E200
diff --git a/arch/powerpc/platforms/ps3/Kconfig b/arch/powerpc/platforms/ps3/Kconfig
index 6f7525555b19..a68c14221523 100644
--- a/arch/powerpc/platforms/ps3/Kconfig
+++ b/arch/powerpc/platforms/ps3/Kconfig
@@ -6,7 +6,6 @@  config PPC_PS3
 	select USB_OHCI_LITTLE_ENDIAN
 	select USB_OHCI_BIG_ENDIAN_MMIO
 	select USB_EHCI_BIG_ENDIAN_MMIO
-	select PPC_PCI_CHOICE
 	help
 	  This option enables support for the Sony PS3 game console
 	  and other platforms using the PS3 hypervisor.  Enabling this
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index a344980287a5..071952cd4cae 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -39,8 +39,10 @@  config RISCV
 	select SPARSE_IRQ
 	select SYSCTL_EXCEPTION_TRACE
 	select HAVE_ARCH_TRACEHOOK
+	select HAVE_PCI
 	select MODULES_USE_ELF_RELA if MODULES
 	select THREAD_INFO_IN_TASK
+	select PCI_MSI if PCI
 	select RISCV_TIMER
 	select GENERIC_IRQ_MULTI_HANDLER
 	select ARCH_HAS_PTE_SPECIAL
@@ -216,28 +218,12 @@  source "kernel/Kconfig.hz"
 
 endmenu
 
-menu "Bus support"
-
-config PCI
-	bool "PCI support"
-	select PCI_MSI
-	help
-	  This feature enables support for PCI bus system. If you say Y
-	  here, the kernel will include drivers and infrastructure code
-	  to support PCI bus devices.
-
-	  If you don't know what to do here, say Y.
-
 config PCI_DOMAINS
 	def_bool PCI
 
 config PCI_DOMAINS_GENERIC
 	def_bool PCI
 
-source "drivers/pci/Kconfig"
-
-endmenu
-
 menu "Power management options"
 
 source kernel/power/Kconfig
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 9a9c7a6fe925..1f56c96bb1c9 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -160,15 +160,21 @@  config S390
 	select HAVE_MOD_ARCH_SPECIFIC
 	select HAVE_NOP_MCOUNT
 	select HAVE_OPROFILE
+	select HAVE_PCI
 	select HAVE_PERF_EVENTS
 	select HAVE_REGS_AND_STACK_ACCESS_API
 	select HAVE_RSEQ
 	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_VIRT_CPU_ACCOUNTING
+	select IOMMU_HELPER		if PCI
+	select IOMMU_SUPPORT		if PCI
 	select MODULES_USE_ELF_RELA
+	select NEED_DMA_MAP_STATE	if PCI
+	select NEED_SG_DMA_LENGTH	if PCI
 	select NO_BOOTMEM
 	select OLD_SIGACTION
 	select OLD_SIGSUSPEND3
+	select PCI_MSI			if PCI
 	select SPARSE_IRQ
 	select SYSCTL_EXCEPTION_TRACE
 	select THREAD_INFO_IN_TASK
@@ -698,17 +704,6 @@  config QDIO
 
 	  If unsure, say Y.
 
-menuconfig PCI
-	bool "PCI support"
-	select PCI_MSI
-	select IOMMU_HELPER
-	select IOMMU_SUPPORT
-	select NEED_DMA_MAP_STATE
-	select NEED_SG_DMA_LENGTH
-
-	help
-	  Enable PCI support.
-
 if PCI
 
 config PCI_NR_FUNCTIONS
@@ -719,13 +714,11 @@  config PCI_NR_FUNCTIONS
 	  This allows you to specify the maximum number of PCI functions which
 	  this kernel will support.
 
-source "drivers/pci/Kconfig"
-
-endif	# PCI
-
 config PCI_DOMAINS
 	def_bool PCI
 
+endif	# PCI
+
 config HAS_IOMEM
 	def_bool PCI
 
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 1fb7b6d72baf..2ff6855811a5 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -41,13 +41,16 @@  config SUPERH
 	select GENERIC_IDLE_POLL_SETUP
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_CMOS_UPDATE if SH_SH03 || SH_DREAMCAST
+	select GENERIC_PCI_IOMAP if PCI
 	select GENERIC_SCHED_CLOCK
 	select GENERIC_STRNCPY_FROM_USER
 	select GENERIC_STRNLEN_USER
 	select HAVE_MOD_ARCH_SPECIFIC if DWARF_UNWINDER
 	select MODULES_USE_ELF_RELA
+	select NO_GENERIC_PCI_IOPORT_MAP if PCI
 	select OLD_SIGSUSPEND
 	select OLD_SIGACTION
+	select PCI_DOMAINS if PCI
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_FUTEX_CMPXCHG if FUTEX
 	select HAVE_NMI
@@ -131,9 +134,6 @@  config SYS_SUPPORTS_SMP
 config SYS_SUPPORTS_NUMA
 	bool
 
-config SYS_SUPPORTS_PCI
-	bool
-
 config STACKTRACE_SUPPORT
 	def_bool y
 
@@ -858,22 +858,9 @@  config MAPLE
 	 Dreamcast with a serial line terminal or a remote network
 	 connection.
 
-config PCI
-	bool "PCI support"
-	depends on SYS_SUPPORTS_PCI
-	select PCI_DOMAINS
-	select GENERIC_PCI_IOMAP
-	select NO_GENERIC_PCI_IOPORT_MAP
-	help
-	  Find out whether you have a PCI motherboard. PCI is the name of a
-	  bus system, i.e. the way the CPU talks to the other stuff inside
-	  your box. If you have PCI, say Y, otherwise N.
-
 config PCI_DOMAINS
 	bool
 
-source "drivers/pci/Kconfig"
-
 source "drivers/pcmcia/Kconfig"
 
 endmenu
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index 6394b4f0a69b..b9a37057b77a 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -101,7 +101,7 @@  config SH_7751_SOLUTION_ENGINE
 config SH_7780_SOLUTION_ENGINE
 	bool "SolutionEngine7780"
 	select SOLUTION_ENGINE
-	select SYS_SUPPORTS_PCI
+	select HAVE_PCI
 	depends on CPU_SUBTYPE_SH7780
 	help
 	  Select 7780 SolutionEngine if configuring for a Renesas SH7780
@@ -129,7 +129,7 @@  config SH_HP6XX
 
 config SH_DREAMCAST
 	bool "Dreamcast"
-	select SYS_SUPPORTS_PCI
+	select HAVE_PCI
 	depends on CPU_SUBTYPE_SH7091
 	help
 	  Select Dreamcast if configuring for a SEGA Dreamcast.
@@ -139,7 +139,7 @@  config SH_SH03
 	bool "Interface CTP/PCI-SH03"
 	depends on CPU_SUBTYPE_SH7751
 	select CPU_HAS_IPR_IRQ
-	select SYS_SUPPORTS_PCI
+	select HAVE_PCI
 	help
 	  CTP/PCI-SH03 is a CPU module computer that is produced
 	  by Interface Corporation.
@@ -149,7 +149,7 @@  config SH_SECUREEDGE5410
 	bool "SecureEdge5410"
 	depends on CPU_SUBTYPE_SH7751R
 	select CPU_HAS_IPR_IRQ
-	select SYS_SUPPORTS_PCI
+	select HAVE_PCI
 	help
 	  Select SecureEdge5410 if configuring for a SnapGear SH board.
 	  This includes both the OEM SecureEdge products as well as the
@@ -158,7 +158,7 @@  config SH_SECUREEDGE5410
 config SH_RTS7751R2D
 	bool "RTS7751R2D"
 	depends on CPU_SUBTYPE_SH7751R
-	select SYS_SUPPORTS_PCI
+	select HAVE_PCI
 	select IO_TRAPPED if MMU
 	help
 	  Select RTS7751R2D if configuring for a Renesas Technology
@@ -176,7 +176,7 @@  config SH_RSK
 config SH_SDK7780
 	bool "SDK7780R3"
 	depends on CPU_SUBTYPE_SH7780
-	select SYS_SUPPORTS_PCI
+	select HAVE_PCI
 	help
 	  Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3
 	  evaluation board.
@@ -184,7 +184,7 @@  config SH_SDK7780
 config SH_SDK7786
 	bool "SDK7786"
 	depends on CPU_SUBTYPE_SH7786
-	select SYS_SUPPORTS_PCI
+	select HAVE_PCI
 	select NO_IOPORT_MAP if !PCI
 	select HAVE_SRAM_POOL
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
@@ -195,7 +195,7 @@  config SH_SDK7786
 config SH_HIGHLANDER
 	bool "Highlander"
 	depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
-	select SYS_SUPPORTS_PCI
+	select HAVE_PCI
 	select IO_TRAPPED if MMU
 
 config SH_SH7757LCR
@@ -207,7 +207,7 @@  config SH_SH7757LCR
 config SH_SH7785LCR
 	bool "SH7785LCR"
 	depends on CPU_SUBTYPE_SH7785
-	select SYS_SUPPORTS_PCI
+	select HAVE_PCI
 
 config SH_SH7785LCR_29BIT_PHYSMAPS
 	bool "SH7785LCR 29bit physmaps"
@@ -229,7 +229,7 @@  config SH_URQUELL
 	bool "Urquell"
 	depends on CPU_SUBTYPE_SH7786
 	select GPIOLIB
-	select SYS_SUPPORTS_PCI
+	select HAVE_PCI
 	select NO_IOPORT_MAP if !PCI
 
 config SH_MIGOR
@@ -302,7 +302,7 @@  config SH_SH4202_MICRODEV
 config SH_LANDISK
 	bool "LANDISK"
 	depends on CPU_SUBTYPE_SH7751R
-	select SYS_SUPPORTS_PCI
+	select HAVE_PCI
 	help
 	  I-O DATA DEVICE, INC. "LANDISK Series" support.
 
@@ -310,7 +310,7 @@  config SH_TITAN
 	bool "TITAN"
 	depends on CPU_SUBTYPE_SH7751R
 	select CPU_HAS_IPR_IRQ
-	select SYS_SUPPORTS_PCI
+	select HAVE_PCI
 	help
 	  Select Titan if you are configuring for a Nimble Microsystems
 	  NetEngine NP51R.
@@ -325,7 +325,7 @@  config SH_SHMIN
 config SH_LBOX_RE2
 	bool "L-BOX RE2"
 	depends on CPU_SUBTYPE_SH7751R
-	select SYS_SUPPORTS_PCI
+	select HAVE_PCI
 	help
 	  Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
 
@@ -346,7 +346,7 @@  config SH_MAGIC_PANEL_R2
 config SH_CAYMAN
 	bool "Hitachi Cayman"
 	depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103
-	select SYS_SUPPORTS_PCI
+	select HAVE_PCI
 	select ARCH_MIGHT_HAVE_PC_SERIO
 
 config SH_POLARIS
@@ -380,7 +380,7 @@  config SH_APSH4A3A
 config SH_APSH4AD0A
 	bool "AP-SH4AD-0A"
 	select SH_ALPHA_BOARD
-	select SYS_SUPPORTS_PCI
+	select HAVE_PCI
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 	depends on CPU_SUBTYPE_SH7786
 	help
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index e6f2a38d2e61..fc311b8dc46b 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -21,6 +21,7 @@  config SPARC
 	select HAVE_ARCH_KGDB if !SMP || SPARC64
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_EXIT_THREAD
+	select HAVE_PCI
 	select SYSCTL_EXCEPTION_TRACE
 	select RTC_CLASS
 	select RTC_DRV_M48T59
@@ -474,18 +475,6 @@  config SUN_LDOMS
 	  Say Y here is you want to support virtual devices via
 	  Logical Domains.
 
-config PCI
-	bool "Support for PCI and PS/2 keyboard/mouse"
-	help
-	  Find out whether your system includes a PCI bus. PCI is the name of
-	  a bus system, i.e. the way the CPU talks to the other stuff inside
-	  your box.  If you say Y here, the kernel will include drivers and
-	  infrastructure code to support PCI bus devices.
-
-	  CONFIG_PCI is needed for all JavaStation's (including MrCoffee),
-	  CP-1200, JavaEngine-1, Corona, Red October, and Serengeti SGSC.
-	  All of these platforms are extremely obscure, so say N if unsure.
-
 config PCI_DOMAINS
 	def_bool PCI if SPARC64
 
@@ -520,8 +509,6 @@  config SPARC_GRPCI2
 	help
 	  Say Y here to include the GRPCI2 Host Bridge Driver.
 
-source "drivers/pci/Kconfig"
-
 source "drivers/pcmcia/Kconfig"
 
 config SUN_OPENPROMFS
diff --git a/arch/um/Kconfig b/arch/um/Kconfig
index 6b9938919f0b..de982541a059 100644
--- a/arch/um/Kconfig
+++ b/arch/um/Kconfig
@@ -31,9 +31,6 @@  config ISA
 config SBUS
 	bool
 
-config PCI
-	bool
-
 config PCMCIA
 	bool
 
diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig
index 60eae744d8fd..601dcad2560e 100644
--- a/arch/unicore32/Kconfig
+++ b/arch/unicore32/Kconfig
@@ -11,6 +11,7 @@  config UNICORE32
 	select GENERIC_ATOMIC64
 	select HAVE_KERNEL_LZO
 	select HAVE_KERNEL_LZMA
+	select HAVE_PCI
 	select VIRT_TO_BUS
 	select ARCH_HAVE_CUSTOM_GPIO_H
 	select GENERIC_FIND_FIRST_BIT
@@ -119,16 +120,6 @@  endmenu
 
 menu "Bus support"
 
-config PCI
-	bool "PCI Support"
-	help
-	  Find out whether you have a PCI motherboard. PCI is the name of a
-	  bus system, i.e. the way the CPU talks to the other stuff inside
-	  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
-	  VESA. If you have PCI, say Y, otherwise N.
-
-source "drivers/pci/Kconfig"
-
 source "drivers/pcmcia/Kconfig"
 
 endmenu
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 1a0be022f91d..5816e20a3ff9 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -178,6 +178,7 @@  config X86
 	select HAVE_PERF_EVENTS
 	select HAVE_PERF_EVENTS_NMI
 	select HAVE_HARDLOCKUP_DETECTOR_PERF	if PERF_EVENTS && HAVE_PERF_EVENTS_NMI
+	select HAVE_PCI
 	select HAVE_PERF_REGS
 	select HAVE_PERF_USER_STACK_DUMP
 	select HAVE_RCU_TABLE_FREE		if PARAVIRT
@@ -2567,15 +2568,6 @@  endmenu
 
 menu "Bus options (PCI etc.)"
 
-config PCI
-	bool "PCI support"
-	default y
-	---help---
-	  Find out whether you have a PCI motherboard. PCI is the name of a
-	  bus system, i.e. the way the CPU talks to the other stuff inside
-	  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
-	  VESA. If you have PCI, say Y, otherwise N.
-
 choice
 	prompt "PCI access mode"
 	depends on X86_32 && PCI
@@ -2658,8 +2650,6 @@  config PCI_CNB20LE_QUIRK
 
 	  You should say N unless you know you need this.
 
-source "drivers/pci/Kconfig"
-
 config ISA_BUS
 	bool "ISA bus support on modern systems" if EXPERT
 	help
diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig
index 0eb9f92f3717..f08a74eeb1fe 100644
--- a/arch/x86/configs/i386_defconfig
+++ b/arch/x86/configs/i386_defconfig
@@ -69,6 +69,7 @@  CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
 CONFIG_X86_ACPI_CPUFREQ=y
+CONFIG_PCI=y
 CONFIG_PCIEPORTBUS=y
 CONFIG_PCI_MSI=y
 CONFIG_PCCARD=y
diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig
index e32fc1f274d8..d053ae4a8098 100644
--- a/arch/x86/configs/x86_64_defconfig
+++ b/arch/x86/configs/x86_64_defconfig
@@ -67,6 +67,7 @@  CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
 CONFIG_X86_ACPI_CPUFREQ=y
+CONFIG_PCI=y
 CONFIG_PCI_MMCONFIG=y
 CONFIG_PCIEPORTBUS=y
 CONFIG_PCCARD=y
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index b9ad83a0ee5d..f057c16a48a5 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -30,6 +30,7 @@  config XTENSA
 	select HAVE_IRQ_TIME_ACCOUNTING
 	select HAVE_MEMBLOCK
 	select HAVE_OPROFILE
+	select HAVE_PCI
 	select HAVE_PERF_EVENTS
 	select HAVE_STACKPROTECTOR
 	select IRQ_DOMAIN
@@ -384,21 +385,6 @@  config XTENSA_CALIBRATE_CCOUNT
 config SERIAL_CONSOLE
 	def_bool n
 
-menu "Bus options"
-
-config PCI
-	bool "PCI support"
-	default y
-	help
-	  Find out whether you have a PCI motherboard. PCI is the name of a
-	  bus system, i.e. the way the CPU talks to the other stuff inside
-	  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
-	  VESA. If you have PCI, say Y, otherwise N.
-
-source "drivers/pci/Kconfig"
-
-endmenu
-
 menu "Platform options"
 
 choice
diff --git a/arch/xtensa/configs/common_defconfig b/arch/xtensa/configs/common_defconfig
index 4bcc76b02109..fa9389869154 100644
--- a/arch/xtensa/configs/common_defconfig
+++ b/arch/xtensa/configs/common_defconfig
@@ -1,3 +1,4 @@ 
+CONFIG_PCI=y
 CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_LOG_BUF_SHIFT=14
diff --git a/arch/xtensa/configs/iss_defconfig b/arch/xtensa/configs/iss_defconfig
index 4bb5b76d9524..68bf923aec8f 100644
--- a/arch/xtensa/configs/iss_defconfig
+++ b/arch/xtensa/configs/iss_defconfig
@@ -4,7 +4,6 @@  CONFIG_EXPERT=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_PCI is not set
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttyS0,38400 eth0=tuntap,,tap0 ip=192.168.168.5:192.168.168.1 root=nfs nfsroot=192.168.168.1:/opt/montavista/pro/devkit/xtensa/linux_be/target memmap=128M@0"
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
diff --git a/drivers/Kconfig b/drivers/Kconfig
index ab4d43923c4d..059573823387 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -1,7 +1,11 @@ 
 # SPDX-License-Identifier: GPL-2.0
 menu "Device Drivers"
 
+# Keep I/O buses first
+
 source "drivers/amba/Kconfig"
+source "drivers/pci/Kconfig"
+
 
 source "drivers/base/Kconfig"
 
diff --git a/drivers/parisc/Kconfig b/drivers/parisc/Kconfig
index 5a48b5606110..5bbfea1a019c 100644
--- a/drivers/parisc/Kconfig
+++ b/drivers/parisc/Kconfig
@@ -63,17 +63,6 @@  config ISA
 	  If you want to plug an ISA card into your EISA bus, say Y here.
 	  Most people should say N.
 
-config PCI
-	bool "PCI support"
-	help
-	  All recent HP machines have PCI slots, and you should say Y here
-	  if you have a recent machine.  If you are convinced you do not have
-	  PCI slots in your machine (eg a 712), then you may say "N" here.
-	  Beware that some GSC cards have a Dino onboard and PCI inside them,
-	  so it may be safest to say "Y" anyway.
-
-source "drivers/pci/Kconfig"
-
 config GSC_DINO
 	bool "GSCtoPCI/Dino PCI support"
 	depends on PCI && GSC
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 56ff8f6d31fc..6ec796c5931f 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -3,6 +3,18 @@ 
 # PCI configuration
 #
 
+config HAVE_PCI
+	bool
+
+menuconfig PCI
+	bool "PCI support"
+	depends on HAVE_PCI
+
+	help
+	  This option enables support for the PCI local bus, including
+	  support for PCI-X and the fundations for PCI Express support.
+	  Say 'Y' here unless you know what you are doing.
+
 source "drivers/pci/pcie/Kconfig"
 
 config PCI_MSI
diff --git a/drivers/pci/endpoint/Kconfig b/drivers/pci/endpoint/Kconfig
index d1e7e4199432..17bbdc9bbde0 100644
--- a/drivers/pci/endpoint/Kconfig
+++ b/drivers/pci/endpoint/Kconfig
@@ -7,7 +7,7 @@  menu "PCI Endpoint"
 
 config PCI_ENDPOINT
 	bool "PCI Endpoint Support"
-	depends on HAS_DMA
+	depends on HAVE_PCI
 	help
 	   Enable this configuration option to support configurable PCI
 	   endpoint. This should be enabled if the platform has a PCI