| Message ID | 20181103100900.30313-4-jagan@amarulasolutions.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | drm/sun4i: Allwinner MIPI-DSI Burst mode support | expand |
On Sat, Nov 03, 2018 at 03:38:53PM +0530, Jagan Teki wrote: > Burst mode display timings are different from convectional > video mode so update the horizontal and vertical timings. > > Reference code taken from BSP > (in drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/de_dsi.c) > dsi_hsa = 0; > dsi_hbp = 0; > dsi_hact = x*dsi_pixel_bits[format]/8; > dsi_hblk = dsi_hact; > dsi_hfp = 0; > dsi_vblk = 0; > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > --- > drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 108 ++++++++++++++----------- > 1 file changed, 60 insertions(+), 48 deletions(-) > > diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > index 077b57ec964c..4965b2c71e4c 100644 > --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c > @@ -479,59 +479,71 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi, > > /* Do all timing calculations up front to allocate buffer space */ > > - /* > - * A sync period is composed of a blanking packet (4 bytes + > - * payload + 2 bytes) and a sync event packet (4 bytes). Its > - * minimal size is therefore 10 bytes > - */ > + if (device->mode_flags == MIPI_DSI_MODE_VIDEO_BURST) { > + hsa = 0; > + hbp = 0; > + hblk = mode->hdisplay * Bpp; > + hfp = 0; > + vblk = 0; > + } else { > + /* > + * A sync period is composed of a blanking packet (4 bytes + > + * payload + 2 bytes) and a sync event packet (4 bytes). Its > + * minimal size is therefore 10 bytes > + */ > #define HSA_PACKET_OVERHEAD 10 > - hsa = max((unsigned int)HSA_PACKET_OVERHEAD, > - (mode->hsync_end - mode->hsync_start) * Bpp - HSA_PACKET_OVERHEAD); > - > - /* > - * The backporch is set using a blanking packet (4 bytes + > - * payload + 2 bytes). Its minimal size is therefore 6 bytes > - */ > + hsa = max((unsigned int)HSA_PACKET_OVERHEAD, > + (mode->hsync_end - mode->hsync_start) * Bpp - > + HSA_PACKET_OVERHEAD); > + > + /* > + * The backporch is set using a blanking packet (4 bytes + > + * payload + 2 bytes). Its minimal size is therefore 6 bytes > + */ > #define HBP_PACKET_OVERHEAD 6 > - hbp = max((unsigned int)HBP_PACKET_OVERHEAD, > - (mode->htotal - mode->hsync_end) * Bpp - HBP_PACKET_OVERHEAD); > - > - /* > - * hblk seems to be the line + porches length. > - * The blank is set using a blanking packet (4 bytes + 4 bytes + > - * payload + 2 bytes). So minimal size is 10 bytes > - */ > + hbp = max((unsigned int)HBP_PACKET_OVERHEAD, > + (mode->htotal - mode->hsync_end) * Bpp - > + HBP_PACKET_OVERHEAD); > + > + /* > + * hblk seems to be the line + porches length. > + * The blank is set using a blanking packet (4 bytes + 4 bytes > + * + payload + 2 bytes). So minimal size is 10 bytes > + */ > #define HBLK_PACKET_OVERHEAD 10 > - hblk_max = (mode->htotal - (mode->hsync_end - mode->hsync_start)) * Bpp; > - hblk_max -= HBLK_PACKET_OVERHEAD; > - hblk = max_t(unsigned int, HBLK_PACKET_OVERHEAD, hblk_max); > - > - /* > - * The frontporch is set using a blanking packet (4 bytes + > - * payload + 2 bytes). Its minimal size is therefore 6 bytes > - * > - * According to BSP code, extra 10 bytes(which is hblk packet overhead) > - * is adding for hfp packet overhead since hfp depends on hblk. > - */ > + hblk_max = (mode->htotal - > + (mode->hsync_end - mode->hsync_start)) * Bpp; > + hblk_max -= HBLK_PACKET_OVERHEAD; > + hblk = max_t(unsigned int, HBLK_PACKET_OVERHEAD, hblk_max); > + > + /* > + * The frontporch is set using a blanking packet (4 bytes + > + * payload + 2 bytes). Its minimal size is therefore 6 bytes > + * > + * According to BSP code, extra 10 bytes(which is hblk packet > + * overhead) is adding for hfp packet overhead since hfp > + * depends on hblk. > + */ > #define HFP_PACKET_OVERHEAD 6 > - hfp_pkt_overhead = (HFP_PACKET_OVERHEAD + HBLK_PACKET_OVERHEAD); > - hfp = max((unsigned int)hfp_pkt_overhead, > - (mode->hsync_start - mode->hdisplay) * Bpp - > - hfp_pkt_overhead); > - > - /* > - * The vertical blank is set using a blanking packet (4 bytes + > - * payload + 2 bytes). Its minimal size is therefore 6 bytes > - */ > + hfp_pkt_overhead = (HFP_PACKET_OVERHEAD + HBLK_PACKET_OVERHEAD); > + hfp = max((unsigned int)hfp_pkt_overhead, > + (mode->hsync_start - mode->hdisplay) * Bpp - > + hfp_pkt_overhead); > + > + /* > + * The vertical blank is set using a blanking packet (4 bytes + > + * payload + 2 bytes). Its minimal size is therefore 6 bytes > + */ > #define VBLK_PACKET_OVERHEAD 6 > - if (device->lanes == 4) { > - int tmp; > - > - tmp = (mode->htotal * Bpp) * mode->vtotal - > - (hblk + VBLK_PACKET_OVERHEAD); > - vblk = (device->lanes - tmp % device->lanes); > - } else { > - vblk = 0; > + if (device->lanes == 4) { > + int tmp; > + > + tmp = (mode->htotal * Bpp) * mode->vtotal - > + (hblk + VBLK_PACKET_OVERHEAD); > + vblk = (device->lanes - tmp % device->lanes); > + } else { > + vblk = 0; > + } > } We should make this a couple of functions to make things more readable. Maxime
diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c index 077b57ec964c..4965b2c71e4c 100644 --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c @@ -479,59 +479,71 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi, /* Do all timing calculations up front to allocate buffer space */ - /* - * A sync period is composed of a blanking packet (4 bytes + - * payload + 2 bytes) and a sync event packet (4 bytes). Its - * minimal size is therefore 10 bytes - */ + if (device->mode_flags == MIPI_DSI_MODE_VIDEO_BURST) { + hsa = 0; + hbp = 0; + hblk = mode->hdisplay * Bpp; + hfp = 0; + vblk = 0; + } else { + /* + * A sync period is composed of a blanking packet (4 bytes + + * payload + 2 bytes) and a sync event packet (4 bytes). Its + * minimal size is therefore 10 bytes + */ #define HSA_PACKET_OVERHEAD 10 - hsa = max((unsigned int)HSA_PACKET_OVERHEAD, - (mode->hsync_end - mode->hsync_start) * Bpp - HSA_PACKET_OVERHEAD); - - /* - * The backporch is set using a blanking packet (4 bytes + - * payload + 2 bytes). Its minimal size is therefore 6 bytes - */ + hsa = max((unsigned int)HSA_PACKET_OVERHEAD, + (mode->hsync_end - mode->hsync_start) * Bpp - + HSA_PACKET_OVERHEAD); + + /* + * The backporch is set using a blanking packet (4 bytes + + * payload + 2 bytes). Its minimal size is therefore 6 bytes + */ #define HBP_PACKET_OVERHEAD 6 - hbp = max((unsigned int)HBP_PACKET_OVERHEAD, - (mode->htotal - mode->hsync_end) * Bpp - HBP_PACKET_OVERHEAD); - - /* - * hblk seems to be the line + porches length. - * The blank is set using a blanking packet (4 bytes + 4 bytes + - * payload + 2 bytes). So minimal size is 10 bytes - */ + hbp = max((unsigned int)HBP_PACKET_OVERHEAD, + (mode->htotal - mode->hsync_end) * Bpp - + HBP_PACKET_OVERHEAD); + + /* + * hblk seems to be the line + porches length. + * The blank is set using a blanking packet (4 bytes + 4 bytes + * + payload + 2 bytes). So minimal size is 10 bytes + */ #define HBLK_PACKET_OVERHEAD 10 - hblk_max = (mode->htotal - (mode->hsync_end - mode->hsync_start)) * Bpp; - hblk_max -= HBLK_PACKET_OVERHEAD; - hblk = max_t(unsigned int, HBLK_PACKET_OVERHEAD, hblk_max); - - /* - * The frontporch is set using a blanking packet (4 bytes + - * payload + 2 bytes). Its minimal size is therefore 6 bytes - * - * According to BSP code, extra 10 bytes(which is hblk packet overhead) - * is adding for hfp packet overhead since hfp depends on hblk. - */ + hblk_max = (mode->htotal - + (mode->hsync_end - mode->hsync_start)) * Bpp; + hblk_max -= HBLK_PACKET_OVERHEAD; + hblk = max_t(unsigned int, HBLK_PACKET_OVERHEAD, hblk_max); + + /* + * The frontporch is set using a blanking packet (4 bytes + + * payload + 2 bytes). Its minimal size is therefore 6 bytes + * + * According to BSP code, extra 10 bytes(which is hblk packet + * overhead) is adding for hfp packet overhead since hfp + * depends on hblk. + */ #define HFP_PACKET_OVERHEAD 6 - hfp_pkt_overhead = (HFP_PACKET_OVERHEAD + HBLK_PACKET_OVERHEAD); - hfp = max((unsigned int)hfp_pkt_overhead, - (mode->hsync_start - mode->hdisplay) * Bpp - - hfp_pkt_overhead); - - /* - * The vertical blank is set using a blanking packet (4 bytes + - * payload + 2 bytes). Its minimal size is therefore 6 bytes - */ + hfp_pkt_overhead = (HFP_PACKET_OVERHEAD + HBLK_PACKET_OVERHEAD); + hfp = max((unsigned int)hfp_pkt_overhead, + (mode->hsync_start - mode->hdisplay) * Bpp - + hfp_pkt_overhead); + + /* + * The vertical blank is set using a blanking packet (4 bytes + + * payload + 2 bytes). Its minimal size is therefore 6 bytes + */ #define VBLK_PACKET_OVERHEAD 6 - if (device->lanes == 4) { - int tmp; - - tmp = (mode->htotal * Bpp) * mode->vtotal - - (hblk + VBLK_PACKET_OVERHEAD); - vblk = (device->lanes - tmp % device->lanes); - } else { - vblk = 0; + if (device->lanes == 4) { + int tmp; + + tmp = (mode->htotal * Bpp) * mode->vtotal - + (hblk + VBLK_PACKET_OVERHEAD); + vblk = (device->lanes - tmp % device->lanes); + } else { + vblk = 0; + } } /* How many bytes do we need to send all payloads? */
Burst mode display timings are different from convectional video mode so update the horizontal and vertical timings. Reference code taken from BSP (in drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/de_dsi.c) dsi_hsa = 0; dsi_hbp = 0; dsi_hact = x*dsi_pixel_bits[format]/8; dsi_hblk = dsi_hact; dsi_hfp = 0; dsi_vblk = 0; Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 108 ++++++++++++++----------- 1 file changed, 60 insertions(+), 48 deletions(-)