| Message ID | 20181105084653.26597-3-xiaowei.bao@nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [PATCHv2,1/6] arm64: dts: Add the status property disable PCIe | expand |
On Mon, 5 Nov 2018 16:46:50 +0800, Xiaowei Bao wrote: > Add the EP mode support. > > Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> > --- > v2: > - Add the SoC specific compatibles. > > .../devicetree/bindings/pci/layerscape-pci.txt | 3 +++ > 1 files changed, 3 insertions(+), 0 deletions(-) > Reviewed-by: Rob Herring <robh@kernel.org>
On Mon, Nov 05, 2018 at 04:46:50PM +0800, Xiaowei Bao wrote: > Add the EP mode support. > > Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> > --- > v2: > - Add the SoC specific compatibles. > > .../devicetree/bindings/pci/layerscape-pci.txt | 3 +++ > 1 files changed, 3 insertions(+), 0 deletions(-) Wrong commit $SUBJECT, this is not PCI code, it is a DT binding update, I will have a look at the rest of the series to see if I can update this patch or you will do it with the next respin. Lorenzo > diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt > index 66df1e8..9c090c7 100644 > --- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt > +++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt > @@ -13,12 +13,15 @@ information. > > Required properties: > - compatible: should contain the platform identifier such as: > + RC mode: > "fsl,ls1021a-pcie", "snps,dw-pcie" > "fsl,ls2080a-pcie", "fsl,ls2085a-pcie", "snps,dw-pcie" > "fsl,ls2088a-pcie" > "fsl,ls1088a-pcie" > "fsl,ls1046a-pcie" > "fsl,ls1012a-pcie" > + EP mode: > + "fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep" > - reg: base addresses and lengths of the PCIe controller register blocks. > - interrupts: A list of interrupt outputs of the controller. Must contain an > entry for each entry in the interrupt-names property. > -- > 1.7.1 >
Hi Lorenzo, -----Original Message----- From: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Sent: 2018年11月30日 18:55 To: Xiaowei Bao <xiaowei.bao@nxp.com> Cc: bhelgaas@google.com; robh+dt@kernel.org; mark.rutland@arm.com; shawnguo@kernel.org; Leo Li <leoyang.li@nxp.com>; kishon@ti.com; arnd@arndb.de; gregkh@linuxfoundation.org; M.h. Lian <minghuan.lian@nxp.com>; Mingkai Hu <mingkai.hu@nxp.com>; Roy Zang <roy.zang@nxp.com>; kstewart@linuxfoundation.org; cyrille.pitchen@free-electrons.com; pombredanne@nexb.com; shawn.lin@rock-chips.com; niklas.cassel@axis.com; linux-pci@vger.kernel.org; devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linuxppc-dev@lists.ozlabs.org Subject: Re: [PATCHv2 3/6] PCI: layerscape: Add the EP mode support On Mon, Nov 05, 2018 at 04:46:50PM +0800, Xiaowei Bao wrote: > Add the EP mode support. > > Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> > --- > v2: > - Add the SoC specific compatibles. > > .../devicetree/bindings/pci/layerscape-pci.txt | 3 +++ > 1 files changed, 3 insertions(+), 0 deletions(-) Wrong commit $SUBJECT, this is not PCI code, it is a DT binding update, I will have a look at the rest of the series to see if I can update this patch or you will do it with the next respin. Lorenzo [Xiaowei Bao] HI Lorenzo, thanks a lot, I will send V3 patch to modify the commits. > diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt > b/Documentation/devicetree/bindings/pci/layerscape-pci.txt > index 66df1e8..9c090c7 100644 > --- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt > +++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt > @@ -13,12 +13,15 @@ information. > > Required properties: > - compatible: should contain the platform identifier such as: > + RC mode: > "fsl,ls1021a-pcie", "snps,dw-pcie" > "fsl,ls2080a-pcie", "fsl,ls2085a-pcie", "snps,dw-pcie" > "fsl,ls2088a-pcie" > "fsl,ls1088a-pcie" > "fsl,ls1046a-pcie" > "fsl,ls1012a-pcie" > + EP mode: > + "fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep" > - reg: base addresses and lengths of the PCIe controller register blocks. > - interrupts: A list of interrupt outputs of the controller. Must contain an > entry for each entry in the interrupt-names property. > -- > 1.7.1 >
diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt index 66df1e8..9c090c7 100644 --- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt +++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt @@ -13,12 +13,15 @@ information. Required properties: - compatible: should contain the platform identifier such as: + RC mode: "fsl,ls1021a-pcie", "snps,dw-pcie" "fsl,ls2080a-pcie", "fsl,ls2085a-pcie", "snps,dw-pcie" "fsl,ls2088a-pcie" "fsl,ls1088a-pcie" "fsl,ls1046a-pcie" "fsl,ls1012a-pcie" + EP mode: + "fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep" - reg: base addresses and lengths of the PCIe controller register blocks. - interrupts: A list of interrupt outputs of the controller. Must contain an entry for each entry in the interrupt-names property.
Add the EP mode support. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> --- v2: - Add the SoC specific compatibles. .../devicetree/bindings/pci/layerscape-pci.txt | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-)