| Message ID | 20181113071336.6242-1-yuval.shaia@oracle.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | Add support for RDMA MAD | expand |
Hi all.
This is a major enhancement to the pvrdma device to allow it to work with
state of the art applications such as MPI.
As described in patch #5, MAD packets are management packets that are used
for many purposes including but not limited to communication layer above IB
verbs API.
Patch 1 exposes new external executable (under contrib) that aims to
address a specific limitation in the RDMA usrespace MAD stack.
This patch-set mainly present MAD enhancement but during the work on it i
came across some bugs and enhancement needed to be implemented before doing
any MAD coding. This is the role of patches 2 to 4, 7 to 9 and 15 to 17.
Patches 6 and 18 are cosmetic changes while not relevant to this patchset
still introduce with it since (at least for 6) hard to decouple.
Patches 12 to 15 couple pvrdma device with vmxnet3 device as this is the
configuration enforced by pvrdma driver in guest - a vmxnet3 device in
function 0 and pvrdma device in function 1 in the same PCI slot. Patch 12
moves needed code from vmxnet3 device to a new header file that can be used
by pvrdma code while Patches 13 to 15 use of it.
Along with this patch-set there is a parallel patch posted to libvirt to
apply the change needed there as part of the process implemented in patches
10 and 11. This change is needed so that guest would be able to configure
any IP to the Ethernet function of the pvrdma device.
https://www.redhat.com/archives/libvir-list/2018-November/msg00135.html
Since we maintain external resources such as GIDs on host GID table we need
to do some cleanup before going down. This is the job of patches 19 and 20.
Patches 20 and 21 contain a fixes for bugs detected during the work on
processing cleanup code during shutdown.
v1 -> v2:
* Fix compilation issue detected when compiling for mingw
* Address comment from Eric Blake re version of QEMU in json
message
* Fix example from QMP message in json file
* Fix case where a VM tries to remove an invalid GID from GID table
* rdmacm-mux: Cleanup entries in socket-gids table when socket is
closed
* Cleanup resources (GIDs, QPs etc) when VM goes down
v2 -> v3:
* Address comment from Cornelia Huck for patch #19
* Add some R-Bs from Marcel Apfelbaum and Dmitry Fleytman
* Update docs/pvrdma.txt with the changes made by this patchset
* Address comments from Shamir Rabinovitch for UMAD multiplexer
Thanks,
Yuval
Yuval Shaia (23):
contrib/rdmacm-mux: Add implementation of RDMA User MAD multiplexer
hw/rdma: Add ability to force notification without re-arm
hw/rdma: Return qpn 1 if ibqp is NULL
hw/rdma: Abort send-op if fail to create addr handler
hw/rdma: Add support for MAD packets
hw/pvrdma: Make function reset_device return void
hw/pvrdma: Make default pkey 0xFFFF
hw/pvrdma: Set the correct opcode for recv completion
hw/pvrdma: Set the correct opcode for send completion
json: Define new QMP message for pvrdma
hw/pvrdma: Add support to allow guest to configure GID table
vmxnet3: Move some definitions to header file
hw/pvrdma: Make sure PCI function 0 is vmxnet3
hw/rdma: Initialize node_guid from vmxnet3 mac address
hw/pvrdma: Make device state depend on Ethernet function state
hw/pvrdma: Fill all CQE fields
hw/pvrdma: Fill error code in command's response
hw/rdma: Remove unneeded code that handles more that one port
vl: Introduce shutdown_notifiers
hw/pvrdma: Clean device's resource when system is shutdown
hw/rdma: Do not use bitmap_zero_extend to free bitmap
hw/rdma: Do not call rdma_backend_del_gid on an empty gid
docs: Update pvrdma device documentation
MAINTAINERS | 2 +
Makefile | 6 +-
Makefile.objs | 5 +
contrib/rdmacm-mux/Makefile.objs | 4 +
contrib/rdmacm-mux/main.c | 771 +++++++++++++++++++++++++++++++
contrib/rdmacm-mux/rdmacm-mux.h | 56 +++
docs/pvrdma.txt | 103 ++++-
hw/net/vmxnet3.c | 116 +----
hw/net/vmxnet3_defs.h | 133 ++++++
hw/rdma/rdma_backend.c | 461 +++++++++++++++---
hw/rdma/rdma_backend.h | 28 +-
hw/rdma/rdma_backend_defs.h | 13 +-
hw/rdma/rdma_rm.c | 120 ++++-
hw/rdma/rdma_rm.h | 17 +-
hw/rdma/rdma_rm_defs.h | 21 +-
hw/rdma/rdma_utils.h | 24 +
hw/rdma/vmw/pvrdma.h | 10 +-
hw/rdma/vmw/pvrdma_cmd.c | 119 +++--
hw/rdma/vmw/pvrdma_main.c | 49 +-
hw/rdma/vmw/pvrdma_qp_ops.c | 62 ++-
include/sysemu/sysemu.h | 1 +
qapi/qapi-schema.json | 1 +
qapi/rdma.json | 38 ++
vl.c | 15 +-
24 files changed, 1868 insertions(+), 307 deletions(-)
create mode 100644 contrib/rdmacm-mux/Makefile.objs
create mode 100644 contrib/rdmacm-mux/main.c
create mode 100644 contrib/rdmacm-mux/rdmacm-mux.h
create mode 100644 hw/net/vmxnet3_defs.h
create mode 100644 qapi/rdma.json
Hi all. This is a major enhancement to the pvrdma device to allow it to work with state of the art applications such as MPI. As described in patch #5, MAD packets are management packets that are used for many purposes including but not limited to communication layer above IB verbs API. Patch 1 exposes new external executable (under contrib) that aims to address a specific limitation in the RDMA usrespace MAD stack. This patch-set mainly present MAD enhancement but during the work on it i came across some bugs and enhancement needed to be implemented before doing any MAD coding. This is the role of patches 2 to 4, 7 to 9 and 15 to 17. Patches 6 and 18 are cosmetic changes while not relevant to this patchset still introduce with it since (at least for 6) hard to decouple. Patches 12 to 15 couple pvrdma device with vmxnet3 device as this is the configuration enforced by pvrdma driver in guest - a vmxnet3 device in function 0 and pvrdma device in function 1 in the same PCI slot. Patch 12 moves needed code from vmxnet3 device to a new header file that can be used by pvrdma code while Patches 13 to 15 use of it. Along with this patch-set there is a parallel patch posted to libvirt to apply the change needed there as part of the process implemented in patches 10 and 11. This change is needed so that guest would be able to configure any IP to the Ethernet function of the pvrdma device. https://www.redhat.com/archives/libvir-list/2018-November/msg00135.html Since we maintain external resources such as GIDs on host GID table we need to do some cleanup before going down. This is the job of patches 19 and 20. Patches 20 and 21 contain a fixes for bugs detected during the work on processing cleanup code during shutdown. v1 -> v2: * Fix compilation issue detected when compiling for mingw * Address comment from Eric Blake re version of QEMU in json message * Fix example from QMP message in json file * Fix case where a VM tries to remove an invalid GID from GID table * rdmacm-mux: Cleanup entries in socket-gids table when socket is closed * Cleanup resources (GIDs, QPs etc) when VM goes down v2 -> v3: * Address comment from Cornelia Huck for patch #19 * Add some R-Bs from Marcel Apfelbaum and Dmitry Fleytman * Update docs/pvrdma.txt with the changes made by this patchset * Address comments from Shamir Rabinovitch for UMAD multiplexer Thanks, Yuval Yuval Shaia (23): contrib/rdmacm-mux: Add implementation of RDMA User MAD multiplexer hw/rdma: Add ability to force notification without re-arm hw/rdma: Return qpn 1 if ibqp is NULL hw/rdma: Abort send-op if fail to create addr handler hw/rdma: Add support for MAD packets hw/pvrdma: Make function reset_device return void hw/pvrdma: Make default pkey 0xFFFF hw/pvrdma: Set the correct opcode for recv completion hw/pvrdma: Set the correct opcode for send completion json: Define new QMP message for pvrdma hw/pvrdma: Add support to allow guest to configure GID table vmxnet3: Move some definitions to header file hw/pvrdma: Make sure PCI function 0 is vmxnet3 hw/rdma: Initialize node_guid from vmxnet3 mac address hw/pvrdma: Make device state depend on Ethernet function state hw/pvrdma: Fill all CQE fields hw/pvrdma: Fill error code in command's response hw/rdma: Remove unneeded code that handles more that one port vl: Introduce shutdown_notifiers hw/pvrdma: Clean device's resource when system is shutdown hw/rdma: Do not use bitmap_zero_extend to free bitmap hw/rdma: Do not call rdma_backend_del_gid on an empty gid docs: Update pvrdma device documentation MAINTAINERS | 2 + Makefile | 6 +- Makefile.objs | 5 + contrib/rdmacm-mux/Makefile.objs | 4 + contrib/rdmacm-mux/main.c | 771 +++++++++++++++++++++++++++++++ contrib/rdmacm-mux/rdmacm-mux.h | 56 +++ docs/pvrdma.txt | 103 ++++- hw/net/vmxnet3.c | 116 +---- hw/net/vmxnet3_defs.h | 133 ++++++ hw/rdma/rdma_backend.c | 461 +++++++++++++++--- hw/rdma/rdma_backend.h | 28 +- hw/rdma/rdma_backend_defs.h | 13 +- hw/rdma/rdma_rm.c | 120 ++++- hw/rdma/rdma_rm.h | 17 +- hw/rdma/rdma_rm_defs.h | 21 +- hw/rdma/rdma_utils.h | 24 + hw/rdma/vmw/pvrdma.h | 10 +- hw/rdma/vmw/pvrdma_cmd.c | 119 +++-- hw/rdma/vmw/pvrdma_main.c | 49 +- hw/rdma/vmw/pvrdma_qp_ops.c | 62 ++- include/sysemu/sysemu.h | 1 + qapi/qapi-schema.json | 1 + qapi/rdma.json | 38 ++ vl.c | 15 +- 24 files changed, 1868 insertions(+), 307 deletions(-) create mode 100644 contrib/rdmacm-mux/Makefile.objs create mode 100644 contrib/rdmacm-mux/main.c create mode 100644 contrib/rdmacm-mux/rdmacm-mux.h create mode 100644 hw/net/vmxnet3_defs.h create mode 100644 qapi/rdma.json