| Message ID | 20181010092434.853-2-skolluku@codeaurora.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Use interconnect API in MDSS on SDM845 | expand |
On Wed, Oct 10, 2018 at 02:54:32PM +0530, Sravanthi Kollukuduru wrote: > Since the upstream interconnect bus framework has landed > upstream, the existing references of custom bus scaling > needs to be cleaned up. Just a few nits below. > > Changes in v2: > - Fixed build error due to partial clean up > > Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> > --- > drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c | 157 ++++++++++------------- > drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h | 4 +- > drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 13 +- > drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.c | 47 ++----- > drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.h | 68 ---------- > drivers/gpu/drm/msm/disp/dpu1/dpu_trace.h | 21 +-- > 6 files changed, 86 insertions(+), 224 deletions(-) > > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c > index 41c5191f9056..4ee6f0dd14f7 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c > @@ -90,7 +90,6 @@ static void _dpu_core_perf_calc_crtc(struct dpu_kms *kms, > struct dpu_core_perf_params *perf) > { > struct dpu_crtc_state *dpu_cstate; > - int i; > > if (!kms || !kms->catalog || !crtc || !state || !perf) { > DPU_ERROR("invalid parameters\n"); > @@ -101,35 +100,24 @@ static void _dpu_core_perf_calc_crtc(struct dpu_kms *kms, > memset(perf, 0, sizeof(struct dpu_core_perf_params)); > > if (!dpu_cstate->bw_control) { > - for (i = 0; i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) { > - perf->bw_ctl[i] = kms->catalog->perf.max_bw_high * > + perf->bw_ctl = kms->catalog->perf.max_bw_high * > 1000ULL; > - perf->max_per_pipe_ib[i] = perf->bw_ctl[i]; > - } > + perf->max_per_pipe_ib = perf->bw_ctl; > perf->core_clk_rate = kms->perf.max_core_clk_rate; > } else if (kms->perf.perf_tune.mode == DPU_PERF_MODE_MINIMUM) { > - for (i = 0; i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) { > - perf->bw_ctl[i] = 0; > - perf->max_per_pipe_ib[i] = 0; > - } > + perf->bw_ctl = 0; > + perf->max_per_pipe_ib = 0; > perf->core_clk_rate = 0; > } else if (kms->perf.perf_tune.mode == DPU_PERF_MODE_FIXED) { > - for (i = 0; i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) { > - perf->bw_ctl[i] = kms->perf.fix_core_ab_vote; > - perf->max_per_pipe_ib[i] = kms->perf.fix_core_ib_vote; > - } > + perf->bw_ctl = kms->perf.fix_core_ab_vote; > + perf->max_per_pipe_ib = kms->perf.fix_core_ib_vote; > perf->core_clk_rate = kms->perf.fix_core_clk_rate; > } > > DPU_DEBUG( > - "crtc=%d clk_rate=%llu core_ib=%llu core_ab=%llu llcc_ib=%llu llcc_ab=%llu mem_ib=%llu mem_ab=%llu\n", > + "crtc=%d clk_rate=%llu core_ib=%llu core_ab=%llu\n", > crtc->base.id, perf->core_clk_rate, > - perf->max_per_pipe_ib[DPU_POWER_HANDLE_DBUS_ID_MNOC], > - perf->bw_ctl[DPU_POWER_HANDLE_DBUS_ID_MNOC], > - perf->max_per_pipe_ib[DPU_POWER_HANDLE_DBUS_ID_LLCC], > - perf->bw_ctl[DPU_POWER_HANDLE_DBUS_ID_LLCC], > - perf->max_per_pipe_ib[DPU_POWER_HANDLE_DBUS_ID_EBI], > - perf->bw_ctl[DPU_POWER_HANDLE_DBUS_ID_EBI]); > + perf->max_per_pipe_ib, perf->bw_ctl); > } > > int dpu_core_perf_crtc_check(struct drm_crtc *crtc, > @@ -142,7 +130,6 @@ int dpu_core_perf_crtc_check(struct drm_crtc *crtc, > struct dpu_crtc_state *dpu_cstate; > struct drm_crtc *tmp_crtc; > struct dpu_kms *kms; > - int i; > > if (!crtc || !state) { > DPU_ERROR("invalid crtc\n"); > @@ -164,31 +151,28 @@ int dpu_core_perf_crtc_check(struct drm_crtc *crtc, > /* obtain new values */ > _dpu_core_perf_calc_crtc(kms, crtc, state, &dpu_cstate->new_perf); > > - for (i = DPU_POWER_HANDLE_DBUS_ID_MNOC; > - i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) { > - bw_sum_of_intfs = dpu_cstate->new_perf.bw_ctl[i]; > - curr_client_type = dpu_crtc_get_client_type(crtc); > + bw_sum_of_intfs = dpu_cstate->new_perf.bw_ctl; > + curr_client_type = dpu_crtc_get_client_type(crtc); > > - drm_for_each_crtc(tmp_crtc, crtc->dev) { > - if (_dpu_core_perf_crtc_is_power_on(tmp_crtc) && > - (dpu_crtc_get_client_type(tmp_crtc) == > - curr_client_type) && > - (tmp_crtc != crtc)) { > - struct dpu_crtc_state *tmp_cstate = > - to_dpu_crtc_state(tmp_crtc->state); > - > - DPU_DEBUG("crtc:%d bw:%llu ctrl:%d\n", > - tmp_crtc->base.id, > - tmp_cstate->new_perf.bw_ctl[i], > - tmp_cstate->bw_control); > - /* > - * For bw check only use the bw if the > - * atomic property has been already set > - */ > - if (tmp_cstate->bw_control) > - bw_sum_of_intfs += > - tmp_cstate->new_perf.bw_ctl[i]; > - } > + drm_for_each_crtc(tmp_crtc, crtc->dev) { > + if (_dpu_core_perf_crtc_is_power_on(tmp_crtc) && > + (dpu_crtc_get_client_type(tmp_crtc) == > + curr_client_type) && Can go on one line now > + (tmp_crtc != crtc)) { > + struct dpu_crtc_state *tmp_cstate = > + to_dpu_crtc_state(tmp_crtc->state); > + > + DPU_DEBUG("crtc:%d bw:%llu ctrl:%d\n", > + tmp_crtc->base.id, > + tmp_cstate->new_perf.bw_ctl, > + tmp_cstate->bw_control); > + /* > + * For bw check only use the bw if the > + * atomic property has been already set > + */ > + if (tmp_cstate->bw_control) > + bw_sum_of_intfs += > + tmp_cstate->new_perf.bw_ctl; Also fits on a line now > } > > /* convert bandwidth to kb */ > @@ -219,9 +203,9 @@ int dpu_core_perf_crtc_check(struct drm_crtc *crtc, > } > > static int _dpu_core_perf_crtc_update_bus(struct dpu_kms *kms, > - struct drm_crtc *crtc, u32 bus_id) > + struct drm_crtc *crtc) > { > - struct dpu_core_perf_params perf = { { 0 } }; > + struct dpu_core_perf_params perf = { 0 }; > enum dpu_crtc_client_type curr_client_type > = dpu_crtc_get_client_type(crtc); > struct drm_crtc *tmp_crtc; > @@ -234,13 +218,12 @@ static int _dpu_core_perf_crtc_update_bus(struct dpu_kms *kms, > dpu_crtc_get_client_type(tmp_crtc)) { > dpu_cstate = to_dpu_crtc_state(tmp_crtc->state); > > - perf.max_per_pipe_ib[bus_id] = > - max(perf.max_per_pipe_ib[bus_id], > - dpu_cstate->new_perf.max_per_pipe_ib[bus_id]); > + perf.max_per_pipe_ib = > + max(perf.max_per_pipe_ib, > + dpu_cstate->new_perf.max_per_pipe_ib); > > - DPU_DEBUG("crtc=%d bus_id=%d bw=%llu\n", > - tmp_crtc->base.id, bus_id, > - dpu_cstate->new_perf.bw_ctl[bus_id]); > + DPU_DEBUG("crtc=%d bw=%llu\n", > + tmp_crtc->base.id, dpu_cstate->new_perf.bw_ctl); > } > } > return ret; > @@ -260,7 +243,6 @@ void dpu_core_perf_crtc_release_bw(struct drm_crtc *crtc) > struct dpu_crtc *dpu_crtc; > struct dpu_crtc_state *dpu_cstate; > struct dpu_kms *kms; > - int i; > > if (!crtc) { > DPU_ERROR("invalid crtc\n"); > @@ -296,10 +278,8 @@ void dpu_core_perf_crtc_release_bw(struct drm_crtc *crtc) > if (kms->perf.enable_bw_release) { > trace_dpu_cmd_release_bw(crtc->base.id); > DPU_DEBUG("Release BW crtc=%d\n", crtc->base.id); > - for (i = 0; i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) { > - dpu_crtc->cur_perf.bw_ctl[i] = 0; > - _dpu_core_perf_crtc_update_bus(kms, crtc, i); > - } > + dpu_crtc->cur_perf.bw_ctl = 0; > + _dpu_core_perf_crtc_update_bus(kms, crtc); > } > } > > @@ -342,11 +322,10 @@ int dpu_core_perf_crtc_update(struct drm_crtc *crtc, > int params_changed, bool stop_req) > { > struct dpu_core_perf_params *new, *old; > - int update_bus = 0, update_clk = 0; > + bool update_bus = false, update_clk = false; > u64 clk_rate = 0; > struct dpu_crtc *dpu_crtc; > struct dpu_crtc_state *dpu_cstate; > - int i; > struct msm_drm_private *priv; > struct dpu_kms *kms; > int ret; > @@ -373,7 +352,6 @@ int dpu_core_perf_crtc_update(struct drm_crtc *crtc, > new = &dpu_cstate->new_perf; > > if (_dpu_core_perf_crtc_is_power_on(crtc) && !stop_req) { > - for (i = 0; i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) { > /* > * cases for bus bandwidth update. > * 1. new bandwidth vote - "ab or ib vote" is higher > @@ -381,23 +359,22 @@ int dpu_core_perf_crtc_update(struct drm_crtc *crtc, > * 2. new bandwidth vote - "ab or ib vote" is lower > * than current vote at end of commit or stop. > */ > - if ((params_changed && ((new->bw_ctl[i] > > - old->bw_ctl[i]) || > - (new->max_per_pipe_ib[i] > > - old->max_per_pipe_ib[i]))) || > - (!params_changed && ((new->bw_ctl[i] < > - old->bw_ctl[i]) || > - (new->max_per_pipe_ib[i] < > - old->max_per_pipe_ib[i])))) { > + if ((params_changed && ((new->bw_ctl > > + old->bw_ctl) || > + (new->max_per_pipe_ib > > + old->max_per_pipe_ib))) || > + (!params_changed && ((new->bw_ctl < > + old->bw_ctl) || > + (new->max_per_pipe_ib < > + old->max_per_pipe_ib)))) { You can condense this by joining some lines together. Bonus points if you can simplify it further. > DPU_DEBUG( > "crtc=%d p=%d new_bw=%llu,old_bw=%llu\n", > crtc->base.id, params_changed, > - new->bw_ctl[i], old->bw_ctl[i]); > - old->bw_ctl[i] = new->bw_ctl[i]; > - old->max_per_pipe_ib[i] = > - new->max_per_pipe_ib[i]; > - update_bus |= BIT(i); > - } > + new->bw_ctl, old->bw_ctl); > + old->bw_ctl = new->bw_ctl; > + old->max_per_pipe_ib = > + new->max_per_pipe_ib; Fits on one line now > + update_bus = true; > } > > if ((params_changed && > @@ -405,30 +382,26 @@ int dpu_core_perf_crtc_update(struct drm_crtc *crtc, > (!params_changed && > (new->core_clk_rate < old->core_clk_rate))) { > old->core_clk_rate = new->core_clk_rate; > - update_clk = 1; > + update_clk = true; > } > } else { > DPU_DEBUG("crtc=%d disable\n", crtc->base.id); > memset(old, 0, sizeof(*old)); > memset(new, 0, sizeof(*new)); > - update_bus = ~0; > - update_clk = 1; > + update_bus = true; > + update_clk = true; > } > + > trace_dpu_perf_crtc_update(crtc->base.id, > - new->bw_ctl[DPU_POWER_HANDLE_DBUS_ID_MNOC], > - new->bw_ctl[DPU_POWER_HANDLE_DBUS_ID_LLCC], > - new->bw_ctl[DPU_POWER_HANDLE_DBUS_ID_EBI], > - new->core_clk_rate, stop_req, > - update_bus, update_clk); > - > - for (i = 0; i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) { > - if (update_bus & BIT(i)) { > - ret = _dpu_core_perf_crtc_update_bus(kms, crtc, i); > - if (ret) { > - DPU_ERROR("crtc-%d: failed to update bw vote for bus-%d\n", > - crtc->base.id, i); > - return ret; > - } > + new->bw_ctl, new->core_clk_rate, > + stop_req, update_bus, update_clk); > + > + if (update_bus) { > + ret = _dpu_core_perf_crtc_update_bus(kms, crtc); > + if (ret) { > + DPU_ERROR("crtc-%d: failed to update bus bw vote\n", > + crtc->base.id); > + return ret; > } > } > > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h > index fbcbe0c7527a..0fb276929dc5 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h > @@ -30,8 +30,8 @@ > * @core_clk_rate: core clock rate request > */ > struct dpu_core_perf_params { > - u64 max_per_pipe_ib[DPU_POWER_HANDLE_DBUS_ID_MAX]; > - u64 bw_ctl[DPU_POWER_HANDLE_DBUS_ID_MAX]; > + u64 max_per_pipe_ib; > + u64 bw_ctl; > u64 core_clk_rate; > }; > > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c > index c5ba753d441c..841476d77f5c 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c > @@ -1373,21 +1373,14 @@ static int dpu_crtc_debugfs_state_show(struct seq_file *s, void *v) > { > struct drm_crtc *crtc = (struct drm_crtc *) s->private; > struct dpu_crtc *dpu_crtc = to_dpu_crtc(crtc); > - int i; > > seq_printf(s, "client type: %d\n", dpu_crtc_get_client_type(crtc)); > seq_printf(s, "intf_mode: %d\n", dpu_crtc_get_intf_mode(crtc)); > seq_printf(s, "core_clk_rate: %llu\n", > dpu_crtc->cur_perf.core_clk_rate); > - for (i = DPU_POWER_HANDLE_DBUS_ID_MNOC; > - i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) { > - seq_printf(s, "bw_ctl[%s]: %llu\n", > - dpu_power_handle_get_dbus_name(i), > - dpu_crtc->cur_perf.bw_ctl[i]); > - seq_printf(s, "max_per_pipe_ib[%s]: %llu\n", > - dpu_power_handle_get_dbus_name(i), > - dpu_crtc->cur_perf.max_per_pipe_ib[i]); > - } > + seq_printf(s, "bw_ctl: %llu\n", dpu_crtc->cur_perf.bw_ctl); > + seq_printf(s, "max_per_pipe_ib: %llu\n", > + dpu_crtc->cur_perf.max_per_pipe_ib); > > return 0; > } > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.c > index fc14116789f2..d58d01544731 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.c > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.c > @@ -24,20 +24,6 @@ > #include "dpu_power_handle.h" > #include "dpu_trace.h" > > -static const char *data_bus_name[DPU_POWER_HANDLE_DBUS_ID_MAX] = { > - [DPU_POWER_HANDLE_DBUS_ID_MNOC] = "qcom,dpu-data-bus", > - [DPU_POWER_HANDLE_DBUS_ID_LLCC] = "qcom,dpu-llcc-bus", > - [DPU_POWER_HANDLE_DBUS_ID_EBI] = "qcom,dpu-ebi-bus", > -}; > - > -const char *dpu_power_handle_get_dbus_name(u32 bus_id) > -{ > - if (bus_id < DPU_POWER_HANDLE_DBUS_ID_MAX) > - return data_bus_name[bus_id]; > - > - return NULL; > -} > - > static void dpu_power_event_trigger_locked(struct dpu_power_handle *phandle, > u32 event_type) > { > @@ -66,7 +52,6 @@ struct dpu_power_client *dpu_power_client_create( > > mutex_lock(&phandle->phandle_lock); > strlcpy(client->name, client_name, MAX_CLIENT_NAME_LEN); > - client->usecase_ndx = VOTE_INDEX_DISABLE; > client->id = id; > client->active = true; > pr_debug("client %s created:%pK id :%d\n", client_name, > @@ -143,8 +128,6 @@ int dpu_power_resource_enable(struct dpu_power_handle *phandle, > struct dpu_power_client *pclient, bool enable) > { > bool changed = false; > - u32 max_usecase_ndx = VOTE_INDEX_DISABLE, prev_usecase_ndx; > - struct dpu_power_client *client; > u32 event_type; > > if (!phandle || !pclient) { > @@ -153,31 +136,19 @@ int dpu_power_resource_enable(struct dpu_power_handle *phandle, > } > > mutex_lock(&phandle->phandle_lock); > - if (enable) > + if (enable) { > pclient->refcount++; > - else if (pclient->refcount) > + if (pclient->refcount == 1) > + changed = true; > + } else if (pclient->refcount) { > pclient->refcount--; > - > - if (pclient->refcount) > - pclient->usecase_ndx = VOTE_INDEX_LOW; > - else > - pclient->usecase_ndx = VOTE_INDEX_DISABLE; > - > - list_for_each_entry(client, &phandle->power_client_clist, list) { > - if (client->usecase_ndx < VOTE_INDEX_MAX && > - client->usecase_ndx > max_usecase_ndx) > - max_usecase_ndx = client->usecase_ndx; > - } > - > - if (phandle->current_usecase_ndx != max_usecase_ndx) { > - changed = true; > - prev_usecase_ndx = phandle->current_usecase_ndx; > - phandle->current_usecase_ndx = max_usecase_ndx; > + if (!pclient->refcount) > + changed = true; > } > > - pr_debug("%pS: changed=%d current idx=%d request client %s id:%u enable:%d refcount:%d\n", > - __builtin_return_address(0), changed, max_usecase_ndx, > - pclient->name, pclient->id, enable, pclient->refcount); > + pr_debug("%pS:changed=%d client %s id:%u enable:%d refcount:%d\n", > + __builtin_return_address(0), changed, pclient->name, > + pclient->id, enable, pclient->refcount); > > if (!changed) > goto end; > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.h > index a65b7a297f21..b1a5ae4d6f4e 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.h > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.h > @@ -16,76 +16,28 @@ > > #define MAX_CLIENT_NAME_LEN 128 > > -#define DPU_POWER_HANDLE_ENABLE_BUS_AB_QUOTA 0 > -#define DPU_POWER_HANDLE_DISABLE_BUS_AB_QUOTA 0 > -#define DPU_POWER_HANDLE_ENABLE_BUS_IB_QUOTA 1600000000 > -#define DPU_POWER_HANDLE_DISABLE_BUS_IB_QUOTA 0 > - > #include "dpu_io_util.h" > > /* events will be triggered on power handler enable/disable */ > #define DPU_POWER_EVENT_DISABLE BIT(0) > #define DPU_POWER_EVENT_ENABLE BIT(1) > > -/** > - * mdss_bus_vote_type: register bus vote type > - * VOTE_INDEX_DISABLE: removes the client vote > - * VOTE_INDEX_LOW: keeps the lowest vote for register bus > - * VOTE_INDEX_MAX: invalid > - */ > -enum mdss_bus_vote_type { > - VOTE_INDEX_DISABLE, > - VOTE_INDEX_LOW, > - VOTE_INDEX_MAX, > -}; > - > -/** > - * enum dpu_power_handle_data_bus_client - type of axi bus clients > - * @DPU_POWER_HANDLE_DATA_BUS_CLIENT_RT: core real-time bus client > - * @DPU_POWER_HANDLE_DATA_BUS_CLIENT_NRT: core non-real-time bus client > - * @DPU_POWER_HANDLE_DATA_BUS_CLIENT_MAX: maximum number of bus client type > - */ > -enum dpu_power_handle_data_bus_client { > - DPU_POWER_HANDLE_DATA_BUS_CLIENT_RT, > - DPU_POWER_HANDLE_DATA_BUS_CLIENT_NRT, > - DPU_POWER_HANDLE_DATA_BUS_CLIENT_MAX > -}; > - > -/** > - * enum DPU_POWER_HANDLE_DBUS_ID - data bus identifier > - * @DPU_POWER_HANDLE_DBUS_ID_MNOC: DPU/MNOC data bus > - * @DPU_POWER_HANDLE_DBUS_ID_LLCC: MNOC/LLCC data bus > - * @DPU_POWER_HANDLE_DBUS_ID_EBI: LLCC/EBI data bus > - */ > -enum DPU_POWER_HANDLE_DBUS_ID { > - DPU_POWER_HANDLE_DBUS_ID_MNOC, > - DPU_POWER_HANDLE_DBUS_ID_LLCC, > - DPU_POWER_HANDLE_DBUS_ID_EBI, > - DPU_POWER_HANDLE_DBUS_ID_MAX, > -}; > - > /** > * struct dpu_power_client: stores the power client for dpu driver > * @name: name of the client > - * @usecase_ndx: current regs bus vote type > * @refcount: current refcount if multiple modules are using same > * same client for enable/disable. Power module will > * aggregate the refcount and vote accordingly for this > * client. > * @id: assigned during create. helps for debugging. > * @list: list to attach power handle master list > - * @ab: arbitrated bandwidth for each bus client > - * @ib: instantaneous bandwidth for each bus client > * @active: inidcates the state of dpu power handle > */ > struct dpu_power_client { > char name[MAX_CLIENT_NAME_LEN]; > - short usecase_ndx; > short refcount; > u32 id; > struct list_head list; > - u64 ab[DPU_POWER_HANDLE_DATA_BUS_CLIENT_MAX]; > - u64 ib[DPU_POWER_HANDLE_DATA_BUS_CLIENT_MAX]; > bool active; > }; > > @@ -112,14 +64,12 @@ struct dpu_power_event { > * @client_clist: master list to store all clients > * @phandle_lock: lock to synchronize the enable/disable > * @dev: pointer to device structure > - * @usecase_ndx: current usecase index > * @event_list: current power handle event list > */ > struct dpu_power_handle { > struct list_head power_client_clist; > struct mutex phandle_lock; > struct device *dev; > - u32 current_usecase_ndx; > struct list_head event_list; > }; > > @@ -172,17 +122,6 @@ void dpu_power_client_destroy(struct dpu_power_handle *phandle, > int dpu_power_resource_enable(struct dpu_power_handle *pdata, > struct dpu_power_client *pclient, bool enable); > > -/** > - * dpu_power_data_bus_bandwidth_ctrl() - control data bus bandwidth enable > - * @phandle: power handle containing the resources > - * @client: client information to bandwidth control > - * @enable: true to enable bandwidth for data base > - * > - * Return: none > - */ > -void dpu_power_data_bus_bandwidth_ctrl(struct dpu_power_handle *phandle, > - struct dpu_power_client *pclient, int enable); > - > /** > * dpu_power_handle_register_event - register a callback function for an event. > * Clients can register for multiple events with a single register. > @@ -207,11 +146,4 @@ struct dpu_power_event *dpu_power_handle_register_event( > void dpu_power_handle_unregister_event(struct dpu_power_handle *phandle, > struct dpu_power_event *event); > > -/** > - * dpu_power_handle_get_dbus_name - get name of given data bus identifier > - * @bus_id: data bus identifier > - * Return: Pointer to name string if success; NULL otherwise > - */ > -const char *dpu_power_handle_get_dbus_name(u32 bus_id); > - > #endif /* _DPU_POWER_HANDLE_H_ */ > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_trace.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_trace.h > index 0c122e173892..f5ed47a1556a 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_trace.h > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_trace.h > @@ -167,16 +167,13 @@ TRACE_EVENT(dpu_trace_counter, > ) > > TRACE_EVENT(dpu_perf_crtc_update, > - TP_PROTO(u32 crtc, u64 bw_ctl_mnoc, u64 bw_ctl_llcc, > - u64 bw_ctl_ebi, u32 core_clk_rate, > - bool stop_req, u32 update_bus, u32 update_clk), > - TP_ARGS(crtc, bw_ctl_mnoc, bw_ctl_llcc, bw_ctl_ebi, core_clk_rate, > + TP_PROTO(u32 crtc, u64 bw_ctl, u32 core_clk_rate, > + bool stop_req, bool update_bus, bool update_clk), > + TP_ARGS(crtc, bw_ctl, core_clk_rate, > stop_req, update_bus, update_clk), > TP_STRUCT__entry( > __field(u32, crtc) > - __field(u64, bw_ctl_mnoc) > - __field(u64, bw_ctl_llcc) > - __field(u64, bw_ctl_ebi) > + __field(u64, bw_ctl) > __field(u32, core_clk_rate) > __field(bool, stop_req) > __field(u32, update_bus) > @@ -184,20 +181,16 @@ TRACE_EVENT(dpu_perf_crtc_update, > ), > TP_fast_assign( > __entry->crtc = crtc; > - __entry->bw_ctl_mnoc = bw_ctl_mnoc; > - __entry->bw_ctl_llcc = bw_ctl_llcc; > - __entry->bw_ctl_ebi = bw_ctl_ebi; > + __entry->bw_ctl = bw_ctl; > __entry->core_clk_rate = core_clk_rate; > __entry->stop_req = stop_req; > __entry->update_bus = update_bus; > __entry->update_clk = update_clk; > ), > TP_printk( > - "crtc=%d bw_mnoc=%llu bw_llcc=%llu bw_ebi=%llu clk_rate=%u stop_req=%d u_bus=%d u_clk=%d", > + "crtc=%d bw_ctl=%llu clk_rate=%u stop_req=%d u_bus=%d u_clk=%d", > __entry->crtc, > - __entry->bw_ctl_mnoc, > - __entry->bw_ctl_llcc, > - __entry->bw_ctl_ebi, > + __entry->bw_ctl, > __entry->core_clk_rate, > __entry->stop_req, > __entry->update_bus, > -- > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, > a Linux Foundation Collaborative Project >
On 2018-11-14 21:19, Sean Paul wrote: > On Wed, Oct 10, 2018 at 02:54:32PM +0530, Sravanthi Kollukuduru wrote: >> Since the upstream interconnect bus framework has landed >> upstream, the existing references of custom bus scaling >> needs to be cleaned up. > > Just a few nits below. Sure, will make the changes. > >> >> Changes in v2: >> - Fixed build error due to partial clean up >> >> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> >> --- >> drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c | 157 >> ++++++++++------------- >> drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h | 4 +- >> drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 13 +- >> drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.c | 47 ++----- >> drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.h | 68 ---------- >> drivers/gpu/drm/msm/disp/dpu1/dpu_trace.h | 21 +-- >> 6 files changed, 86 insertions(+), 224 deletions(-) >> >> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c >> b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c >> index 41c5191f9056..4ee6f0dd14f7 100644 >> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c >> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c >> @@ -90,7 +90,6 @@ static void _dpu_core_perf_calc_crtc(struct dpu_kms >> *kms, >> struct dpu_core_perf_params *perf) >> { >> struct dpu_crtc_state *dpu_cstate; >> - int i; >> >> if (!kms || !kms->catalog || !crtc || !state || !perf) { >> DPU_ERROR("invalid parameters\n"); >> @@ -101,35 +100,24 @@ static void _dpu_core_perf_calc_crtc(struct >> dpu_kms *kms, >> memset(perf, 0, sizeof(struct dpu_core_perf_params)); >> >> if (!dpu_cstate->bw_control) { >> - for (i = 0; i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) { >> - perf->bw_ctl[i] = kms->catalog->perf.max_bw_high * >> + perf->bw_ctl = kms->catalog->perf.max_bw_high * >> 1000ULL; >> - perf->max_per_pipe_ib[i] = perf->bw_ctl[i]; >> - } >> + perf->max_per_pipe_ib = perf->bw_ctl; >> perf->core_clk_rate = kms->perf.max_core_clk_rate; >> } else if (kms->perf.perf_tune.mode == DPU_PERF_MODE_MINIMUM) { >> - for (i = 0; i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) { >> - perf->bw_ctl[i] = 0; >> - perf->max_per_pipe_ib[i] = 0; >> - } >> + perf->bw_ctl = 0; >> + perf->max_per_pipe_ib = 0; >> perf->core_clk_rate = 0; >> } else if (kms->perf.perf_tune.mode == DPU_PERF_MODE_FIXED) { >> - for (i = 0; i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) { >> - perf->bw_ctl[i] = kms->perf.fix_core_ab_vote; >> - perf->max_per_pipe_ib[i] = kms->perf.fix_core_ib_vote; >> - } >> + perf->bw_ctl = kms->perf.fix_core_ab_vote; >> + perf->max_per_pipe_ib = kms->perf.fix_core_ib_vote; >> perf->core_clk_rate = kms->perf.fix_core_clk_rate; >> } >> >> DPU_DEBUG( >> - "crtc=%d clk_rate=%llu core_ib=%llu core_ab=%llu llcc_ib=%llu >> llcc_ab=%llu mem_ib=%llu mem_ab=%llu\n", >> + "crtc=%d clk_rate=%llu core_ib=%llu core_ab=%llu\n", >> crtc->base.id, perf->core_clk_rate, >> - perf->max_per_pipe_ib[DPU_POWER_HANDLE_DBUS_ID_MNOC], >> - perf->bw_ctl[DPU_POWER_HANDLE_DBUS_ID_MNOC], >> - perf->max_per_pipe_ib[DPU_POWER_HANDLE_DBUS_ID_LLCC], >> - perf->bw_ctl[DPU_POWER_HANDLE_DBUS_ID_LLCC], >> - perf->max_per_pipe_ib[DPU_POWER_HANDLE_DBUS_ID_EBI], >> - perf->bw_ctl[DPU_POWER_HANDLE_DBUS_ID_EBI]); >> + perf->max_per_pipe_ib, perf->bw_ctl); >> } >> >> int dpu_core_perf_crtc_check(struct drm_crtc *crtc, >> @@ -142,7 +130,6 @@ int dpu_core_perf_crtc_check(struct drm_crtc >> *crtc, >> struct dpu_crtc_state *dpu_cstate; >> struct drm_crtc *tmp_crtc; >> struct dpu_kms *kms; >> - int i; >> >> if (!crtc || !state) { >> DPU_ERROR("invalid crtc\n"); >> @@ -164,31 +151,28 @@ int dpu_core_perf_crtc_check(struct drm_crtc >> *crtc, >> /* obtain new values */ >> _dpu_core_perf_calc_crtc(kms, crtc, state, &dpu_cstate->new_perf); >> >> - for (i = DPU_POWER_HANDLE_DBUS_ID_MNOC; >> - i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) { >> - bw_sum_of_intfs = dpu_cstate->new_perf.bw_ctl[i]; >> - curr_client_type = dpu_crtc_get_client_type(crtc); >> + bw_sum_of_intfs = dpu_cstate->new_perf.bw_ctl; >> + curr_client_type = dpu_crtc_get_client_type(crtc); >> >> - drm_for_each_crtc(tmp_crtc, crtc->dev) { >> - if (_dpu_core_perf_crtc_is_power_on(tmp_crtc) && >> - (dpu_crtc_get_client_type(tmp_crtc) == >> - curr_client_type) && >> - (tmp_crtc != crtc)) { >> - struct dpu_crtc_state *tmp_cstate = >> - to_dpu_crtc_state(tmp_crtc->state); >> - >> - DPU_DEBUG("crtc:%d bw:%llu ctrl:%d\n", >> - tmp_crtc->base.id, >> - tmp_cstate->new_perf.bw_ctl[i], >> - tmp_cstate->bw_control); >> - /* >> - * For bw check only use the bw if the >> - * atomic property has been already set >> - */ >> - if (tmp_cstate->bw_control) >> - bw_sum_of_intfs += >> - tmp_cstate->new_perf.bw_ctl[i]; >> - } >> + drm_for_each_crtc(tmp_crtc, crtc->dev) { >> + if (_dpu_core_perf_crtc_is_power_on(tmp_crtc) && >> + (dpu_crtc_get_client_type(tmp_crtc) == >> + curr_client_type) && > > Can go on one line now > >> + (tmp_crtc != crtc)) { >> + struct dpu_crtc_state *tmp_cstate = >> + to_dpu_crtc_state(tmp_crtc->state); >> + >> + DPU_DEBUG("crtc:%d bw:%llu ctrl:%d\n", >> + tmp_crtc->base.id, >> + tmp_cstate->new_perf.bw_ctl, >> + tmp_cstate->bw_control); >> + /* >> + * For bw check only use the bw if the >> + * atomic property has been already set >> + */ >> + if (tmp_cstate->bw_control) >> + bw_sum_of_intfs += >> + tmp_cstate->new_perf.bw_ctl; > > Also fits on a line now > >> } >> >> /* convert bandwidth to kb */ >> @@ -219,9 +203,9 @@ int dpu_core_perf_crtc_check(struct drm_crtc >> *crtc, >> } >> >> static int _dpu_core_perf_crtc_update_bus(struct dpu_kms *kms, >> - struct drm_crtc *crtc, u32 bus_id) >> + struct drm_crtc *crtc) >> { >> - struct dpu_core_perf_params perf = { { 0 } }; >> + struct dpu_core_perf_params perf = { 0 }; >> enum dpu_crtc_client_type curr_client_type >> = dpu_crtc_get_client_type(crtc); >> struct drm_crtc *tmp_crtc; >> @@ -234,13 +218,12 @@ static int _dpu_core_perf_crtc_update_bus(struct >> dpu_kms *kms, >> dpu_crtc_get_client_type(tmp_crtc)) { >> dpu_cstate = to_dpu_crtc_state(tmp_crtc->state); >> >> - perf.max_per_pipe_ib[bus_id] = >> - max(perf.max_per_pipe_ib[bus_id], >> - dpu_cstate->new_perf.max_per_pipe_ib[bus_id]); >> + perf.max_per_pipe_ib = >> + max(perf.max_per_pipe_ib, >> + dpu_cstate->new_perf.max_per_pipe_ib); >> >> - DPU_DEBUG("crtc=%d bus_id=%d bw=%llu\n", >> - tmp_crtc->base.id, bus_id, >> - dpu_cstate->new_perf.bw_ctl[bus_id]); >> + DPU_DEBUG("crtc=%d bw=%llu\n", >> + tmp_crtc->base.id, dpu_cstate->new_perf.bw_ctl); >> } >> } >> return ret; >> @@ -260,7 +243,6 @@ void dpu_core_perf_crtc_release_bw(struct drm_crtc >> *crtc) >> struct dpu_crtc *dpu_crtc; >> struct dpu_crtc_state *dpu_cstate; >> struct dpu_kms *kms; >> - int i; >> >> if (!crtc) { >> DPU_ERROR("invalid crtc\n"); >> @@ -296,10 +278,8 @@ void dpu_core_perf_crtc_release_bw(struct >> drm_crtc *crtc) >> if (kms->perf.enable_bw_release) { >> trace_dpu_cmd_release_bw(crtc->base.id); >> DPU_DEBUG("Release BW crtc=%d\n", crtc->base.id); >> - for (i = 0; i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) { >> - dpu_crtc->cur_perf.bw_ctl[i] = 0; >> - _dpu_core_perf_crtc_update_bus(kms, crtc, i); >> - } >> + dpu_crtc->cur_perf.bw_ctl = 0; >> + _dpu_core_perf_crtc_update_bus(kms, crtc); >> } >> } >> >> @@ -342,11 +322,10 @@ int dpu_core_perf_crtc_update(struct drm_crtc >> *crtc, >> int params_changed, bool stop_req) >> { >> struct dpu_core_perf_params *new, *old; >> - int update_bus = 0, update_clk = 0; >> + bool update_bus = false, update_clk = false; >> u64 clk_rate = 0; >> struct dpu_crtc *dpu_crtc; >> struct dpu_crtc_state *dpu_cstate; >> - int i; >> struct msm_drm_private *priv; >> struct dpu_kms *kms; >> int ret; >> @@ -373,7 +352,6 @@ int dpu_core_perf_crtc_update(struct drm_crtc >> *crtc, >> new = &dpu_cstate->new_perf; >> >> if (_dpu_core_perf_crtc_is_power_on(crtc) && !stop_req) { >> - for (i = 0; i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) { >> /* >> * cases for bus bandwidth update. >> * 1. new bandwidth vote - "ab or ib vote" is higher >> @@ -381,23 +359,22 @@ int dpu_core_perf_crtc_update(struct drm_crtc >> *crtc, >> * 2. new bandwidth vote - "ab or ib vote" is lower >> * than current vote at end of commit or stop. >> */ >> - if ((params_changed && ((new->bw_ctl[i] > >> - old->bw_ctl[i]) || >> - (new->max_per_pipe_ib[i] > >> - old->max_per_pipe_ib[i]))) || >> - (!params_changed && ((new->bw_ctl[i] < >> - old->bw_ctl[i]) || >> - (new->max_per_pipe_ib[i] < >> - old->max_per_pipe_ib[i])))) { >> + if ((params_changed && ((new->bw_ctl > >> + old->bw_ctl) || >> + (new->max_per_pipe_ib > >> + old->max_per_pipe_ib))) || >> + (!params_changed && ((new->bw_ctl < >> + old->bw_ctl) || >> + (new->max_per_pipe_ib < >> + old->max_per_pipe_ib)))) { > > You can condense this by joining some lines together. Bonus points if > you can > simplify it further. > >> DPU_DEBUG( >> "crtc=%d p=%d new_bw=%llu,old_bw=%llu\n", >> crtc->base.id, params_changed, >> - new->bw_ctl[i], old->bw_ctl[i]); >> - old->bw_ctl[i] = new->bw_ctl[i]; >> - old->max_per_pipe_ib[i] = >> - new->max_per_pipe_ib[i]; >> - update_bus |= BIT(i); >> - } >> + new->bw_ctl, old->bw_ctl); >> + old->bw_ctl = new->bw_ctl; >> + old->max_per_pipe_ib = >> + new->max_per_pipe_ib; > > Fits on one line now > >> + update_bus = true; >> } >> >> if ((params_changed && >> @@ -405,30 +382,26 @@ int dpu_core_perf_crtc_update(struct drm_crtc >> *crtc, >> (!params_changed && >> (new->core_clk_rate < old->core_clk_rate))) { >> old->core_clk_rate = new->core_clk_rate; >> - update_clk = 1; >> + update_clk = true; >> } >> } else { >> DPU_DEBUG("crtc=%d disable\n", crtc->base.id); >> memset(old, 0, sizeof(*old)); >> memset(new, 0, sizeof(*new)); >> - update_bus = ~0; >> - update_clk = 1; >> + update_bus = true; >> + update_clk = true; >> } >> + >> trace_dpu_perf_crtc_update(crtc->base.id, >> - new->bw_ctl[DPU_POWER_HANDLE_DBUS_ID_MNOC], >> - new->bw_ctl[DPU_POWER_HANDLE_DBUS_ID_LLCC], >> - new->bw_ctl[DPU_POWER_HANDLE_DBUS_ID_EBI], >> - new->core_clk_rate, stop_req, >> - update_bus, update_clk); >> - >> - for (i = 0; i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) { >> - if (update_bus & BIT(i)) { >> - ret = _dpu_core_perf_crtc_update_bus(kms, crtc, i); >> - if (ret) { >> - DPU_ERROR("crtc-%d: failed to update bw vote for bus-%d\n", >> - crtc->base.id, i); >> - return ret; >> - } >> + new->bw_ctl, new->core_clk_rate, >> + stop_req, update_bus, update_clk); >> + >> + if (update_bus) { >> + ret = _dpu_core_perf_crtc_update_bus(kms, crtc); >> + if (ret) { >> + DPU_ERROR("crtc-%d: failed to update bus bw vote\n", >> + crtc->base.id); >> + return ret; >> } >> } >> >> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h >> b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h >> index fbcbe0c7527a..0fb276929dc5 100644 >> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h >> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h >> @@ -30,8 +30,8 @@ >> * @core_clk_rate: core clock rate request >> */ >> struct dpu_core_perf_params { >> - u64 max_per_pipe_ib[DPU_POWER_HANDLE_DBUS_ID_MAX]; >> - u64 bw_ctl[DPU_POWER_HANDLE_DBUS_ID_MAX]; >> + u64 max_per_pipe_ib; >> + u64 bw_ctl; >> u64 core_clk_rate; >> }; >> >> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c >> b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c >> index c5ba753d441c..841476d77f5c 100644 >> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c >> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c >> @@ -1373,21 +1373,14 @@ static int dpu_crtc_debugfs_state_show(struct >> seq_file *s, void *v) >> { >> struct drm_crtc *crtc = (struct drm_crtc *) s->private; >> struct dpu_crtc *dpu_crtc = to_dpu_crtc(crtc); >> - int i; >> >> seq_printf(s, "client type: %d\n", dpu_crtc_get_client_type(crtc)); >> seq_printf(s, "intf_mode: %d\n", dpu_crtc_get_intf_mode(crtc)); >> seq_printf(s, "core_clk_rate: %llu\n", >> dpu_crtc->cur_perf.core_clk_rate); >> - for (i = DPU_POWER_HANDLE_DBUS_ID_MNOC; >> - i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) { >> - seq_printf(s, "bw_ctl[%s]: %llu\n", >> - dpu_power_handle_get_dbus_name(i), >> - dpu_crtc->cur_perf.bw_ctl[i]); >> - seq_printf(s, "max_per_pipe_ib[%s]: %llu\n", >> - dpu_power_handle_get_dbus_name(i), >> - dpu_crtc->cur_perf.max_per_pipe_ib[i]); >> - } >> + seq_printf(s, "bw_ctl: %llu\n", dpu_crtc->cur_perf.bw_ctl); >> + seq_printf(s, "max_per_pipe_ib: %llu\n", >> + dpu_crtc->cur_perf.max_per_pipe_ib); >> >> return 0; >> } >> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.c >> b/drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.c >> index fc14116789f2..d58d01544731 100644 >> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.c >> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.c >> @@ -24,20 +24,6 @@ >> #include "dpu_power_handle.h" >> #include "dpu_trace.h" >> >> -static const char *data_bus_name[DPU_POWER_HANDLE_DBUS_ID_MAX] = { >> - [DPU_POWER_HANDLE_DBUS_ID_MNOC] = "qcom,dpu-data-bus", >> - [DPU_POWER_HANDLE_DBUS_ID_LLCC] = "qcom,dpu-llcc-bus", >> - [DPU_POWER_HANDLE_DBUS_ID_EBI] = "qcom,dpu-ebi-bus", >> -}; >> - >> -const char *dpu_power_handle_get_dbus_name(u32 bus_id) >> -{ >> - if (bus_id < DPU_POWER_HANDLE_DBUS_ID_MAX) >> - return data_bus_name[bus_id]; >> - >> - return NULL; >> -} >> - >> static void dpu_power_event_trigger_locked(struct dpu_power_handle >> *phandle, >> u32 event_type) >> { >> @@ -66,7 +52,6 @@ struct dpu_power_client *dpu_power_client_create( >> >> mutex_lock(&phandle->phandle_lock); >> strlcpy(client->name, client_name, MAX_CLIENT_NAME_LEN); >> - client->usecase_ndx = VOTE_INDEX_DISABLE; >> client->id = id; >> client->active = true; >> pr_debug("client %s created:%pK id :%d\n", client_name, >> @@ -143,8 +128,6 @@ int dpu_power_resource_enable(struct >> dpu_power_handle *phandle, >> struct dpu_power_client *pclient, bool enable) >> { >> bool changed = false; >> - u32 max_usecase_ndx = VOTE_INDEX_DISABLE, prev_usecase_ndx; >> - struct dpu_power_client *client; >> u32 event_type; >> >> if (!phandle || !pclient) { >> @@ -153,31 +136,19 @@ int dpu_power_resource_enable(struct >> dpu_power_handle *phandle, >> } >> >> mutex_lock(&phandle->phandle_lock); >> - if (enable) >> + if (enable) { >> pclient->refcount++; >> - else if (pclient->refcount) >> + if (pclient->refcount == 1) >> + changed = true; >> + } else if (pclient->refcount) { >> pclient->refcount--; >> - >> - if (pclient->refcount) >> - pclient->usecase_ndx = VOTE_INDEX_LOW; >> - else >> - pclient->usecase_ndx = VOTE_INDEX_DISABLE; >> - >> - list_for_each_entry(client, &phandle->power_client_clist, list) { >> - if (client->usecase_ndx < VOTE_INDEX_MAX && >> - client->usecase_ndx > max_usecase_ndx) >> - max_usecase_ndx = client->usecase_ndx; >> - } >> - >> - if (phandle->current_usecase_ndx != max_usecase_ndx) { >> - changed = true; >> - prev_usecase_ndx = phandle->current_usecase_ndx; >> - phandle->current_usecase_ndx = max_usecase_ndx; >> + if (!pclient->refcount) >> + changed = true; >> } >> >> - pr_debug("%pS: changed=%d current idx=%d request client %s id:%u >> enable:%d refcount:%d\n", >> - __builtin_return_address(0), changed, max_usecase_ndx, >> - pclient->name, pclient->id, enable, pclient->refcount); >> + pr_debug("%pS:changed=%d client %s id:%u enable:%d refcount:%d\n", >> + __builtin_return_address(0), changed, pclient->name, >> + pclient->id, enable, pclient->refcount); >> >> if (!changed) >> goto end; >> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.h >> b/drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.h >> index a65b7a297f21..b1a5ae4d6f4e 100644 >> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.h >> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.h >> @@ -16,76 +16,28 @@ >> >> #define MAX_CLIENT_NAME_LEN 128 >> >> -#define DPU_POWER_HANDLE_ENABLE_BUS_AB_QUOTA 0 >> -#define DPU_POWER_HANDLE_DISABLE_BUS_AB_QUOTA 0 >> -#define DPU_POWER_HANDLE_ENABLE_BUS_IB_QUOTA 1600000000 >> -#define DPU_POWER_HANDLE_DISABLE_BUS_IB_QUOTA 0 >> - >> #include "dpu_io_util.h" >> >> /* events will be triggered on power handler enable/disable */ >> #define DPU_POWER_EVENT_DISABLE BIT(0) >> #define DPU_POWER_EVENT_ENABLE BIT(1) >> >> -/** >> - * mdss_bus_vote_type: register bus vote type >> - * VOTE_INDEX_DISABLE: removes the client vote >> - * VOTE_INDEX_LOW: keeps the lowest vote for register bus >> - * VOTE_INDEX_MAX: invalid >> - */ >> -enum mdss_bus_vote_type { >> - VOTE_INDEX_DISABLE, >> - VOTE_INDEX_LOW, >> - VOTE_INDEX_MAX, >> -}; >> - >> -/** >> - * enum dpu_power_handle_data_bus_client - type of axi bus clients >> - * @DPU_POWER_HANDLE_DATA_BUS_CLIENT_RT: core real-time bus client >> - * @DPU_POWER_HANDLE_DATA_BUS_CLIENT_NRT: core non-real-time bus >> client >> - * @DPU_POWER_HANDLE_DATA_BUS_CLIENT_MAX: maximum number of bus >> client type >> - */ >> -enum dpu_power_handle_data_bus_client { >> - DPU_POWER_HANDLE_DATA_BUS_CLIENT_RT, >> - DPU_POWER_HANDLE_DATA_BUS_CLIENT_NRT, >> - DPU_POWER_HANDLE_DATA_BUS_CLIENT_MAX >> -}; >> - >> -/** >> - * enum DPU_POWER_HANDLE_DBUS_ID - data bus identifier >> - * @DPU_POWER_HANDLE_DBUS_ID_MNOC: DPU/MNOC data bus >> - * @DPU_POWER_HANDLE_DBUS_ID_LLCC: MNOC/LLCC data bus >> - * @DPU_POWER_HANDLE_DBUS_ID_EBI: LLCC/EBI data bus >> - */ >> -enum DPU_POWER_HANDLE_DBUS_ID { >> - DPU_POWER_HANDLE_DBUS_ID_MNOC, >> - DPU_POWER_HANDLE_DBUS_ID_LLCC, >> - DPU_POWER_HANDLE_DBUS_ID_EBI, >> - DPU_POWER_HANDLE_DBUS_ID_MAX, >> -}; >> - >> /** >> * struct dpu_power_client: stores the power client for dpu driver >> * @name: name of the client >> - * @usecase_ndx: current regs bus vote type >> * @refcount: current refcount if multiple modules are using same >> * same client for enable/disable. Power module will >> * aggregate the refcount and vote accordingly for this >> * client. >> * @id: assigned during create. helps for debugging. >> * @list: list to attach power handle master list >> - * @ab: arbitrated bandwidth for each bus client >> - * @ib: instantaneous bandwidth for each bus client >> * @active: inidcates the state of dpu power handle >> */ >> struct dpu_power_client { >> char name[MAX_CLIENT_NAME_LEN]; >> - short usecase_ndx; >> short refcount; >> u32 id; >> struct list_head list; >> - u64 ab[DPU_POWER_HANDLE_DATA_BUS_CLIENT_MAX]; >> - u64 ib[DPU_POWER_HANDLE_DATA_BUS_CLIENT_MAX]; >> bool active; >> }; >> >> @@ -112,14 +64,12 @@ struct dpu_power_event { >> * @client_clist: master list to store all clients >> * @phandle_lock: lock to synchronize the enable/disable >> * @dev: pointer to device structure >> - * @usecase_ndx: current usecase index >> * @event_list: current power handle event list >> */ >> struct dpu_power_handle { >> struct list_head power_client_clist; >> struct mutex phandle_lock; >> struct device *dev; >> - u32 current_usecase_ndx; >> struct list_head event_list; >> }; >> >> @@ -172,17 +122,6 @@ void dpu_power_client_destroy(struct >> dpu_power_handle *phandle, >> int dpu_power_resource_enable(struct dpu_power_handle *pdata, >> struct dpu_power_client *pclient, bool enable); >> >> -/** >> - * dpu_power_data_bus_bandwidth_ctrl() - control data bus bandwidth >> enable >> - * @phandle: power handle containing the resources >> - * @client: client information to bandwidth control >> - * @enable: true to enable bandwidth for data base >> - * >> - * Return: none >> - */ >> -void dpu_power_data_bus_bandwidth_ctrl(struct dpu_power_handle >> *phandle, >> - struct dpu_power_client *pclient, int enable); >> - >> /** >> * dpu_power_handle_register_event - register a callback function for >> an event. >> * Clients can register for multiple events with a single register. >> @@ -207,11 +146,4 @@ struct dpu_power_event >> *dpu_power_handle_register_event( >> void dpu_power_handle_unregister_event(struct dpu_power_handle >> *phandle, >> struct dpu_power_event *event); >> >> -/** >> - * dpu_power_handle_get_dbus_name - get name of given data bus >> identifier >> - * @bus_id: data bus identifier >> - * Return: Pointer to name string if success; NULL otherwise >> - */ >> -const char *dpu_power_handle_get_dbus_name(u32 bus_id); >> - >> #endif /* _DPU_POWER_HANDLE_H_ */ >> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_trace.h >> b/drivers/gpu/drm/msm/disp/dpu1/dpu_trace.h >> index 0c122e173892..f5ed47a1556a 100644 >> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_trace.h >> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_trace.h >> @@ -167,16 +167,13 @@ TRACE_EVENT(dpu_trace_counter, >> ) >> >> TRACE_EVENT(dpu_perf_crtc_update, >> - TP_PROTO(u32 crtc, u64 bw_ctl_mnoc, u64 bw_ctl_llcc, >> - u64 bw_ctl_ebi, u32 core_clk_rate, >> - bool stop_req, u32 update_bus, u32 update_clk), >> - TP_ARGS(crtc, bw_ctl_mnoc, bw_ctl_llcc, bw_ctl_ebi, core_clk_rate, >> + TP_PROTO(u32 crtc, u64 bw_ctl, u32 core_clk_rate, >> + bool stop_req, bool update_bus, bool update_clk), >> + TP_ARGS(crtc, bw_ctl, core_clk_rate, >> stop_req, update_bus, update_clk), >> TP_STRUCT__entry( >> __field(u32, crtc) >> - __field(u64, bw_ctl_mnoc) >> - __field(u64, bw_ctl_llcc) >> - __field(u64, bw_ctl_ebi) >> + __field(u64, bw_ctl) >> __field(u32, core_clk_rate) >> __field(bool, stop_req) >> __field(u32, update_bus) >> @@ -184,20 +181,16 @@ TRACE_EVENT(dpu_perf_crtc_update, >> ), >> TP_fast_assign( >> __entry->crtc = crtc; >> - __entry->bw_ctl_mnoc = bw_ctl_mnoc; >> - __entry->bw_ctl_llcc = bw_ctl_llcc; >> - __entry->bw_ctl_ebi = bw_ctl_ebi; >> + __entry->bw_ctl = bw_ctl; >> __entry->core_clk_rate = core_clk_rate; >> __entry->stop_req = stop_req; >> __entry->update_bus = update_bus; >> __entry->update_clk = update_clk; >> ), >> TP_printk( >> - "crtc=%d bw_mnoc=%llu bw_llcc=%llu bw_ebi=%llu clk_rate=%u >> stop_req=%d u_bus=%d u_clk=%d", >> + "crtc=%d bw_ctl=%llu clk_rate=%u stop_req=%d u_bus=%d u_clk=%d", >> __entry->crtc, >> - __entry->bw_ctl_mnoc, >> - __entry->bw_ctl_llcc, >> - __entry->bw_ctl_ebi, >> + __entry->bw_ctl, >> __entry->core_clk_rate, >> __entry->stop_req, >> __entry->update_bus, >> -- >> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora >> Forum, >> a Linux Foundation Collaborative Project >>
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c index 41c5191f9056..4ee6f0dd14f7 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c @@ -90,7 +90,6 @@ static void _dpu_core_perf_calc_crtc(struct dpu_kms *kms, struct dpu_core_perf_params *perf) { struct dpu_crtc_state *dpu_cstate; - int i; if (!kms || !kms->catalog || !crtc || !state || !perf) { DPU_ERROR("invalid parameters\n"); @@ -101,35 +100,24 @@ static void _dpu_core_perf_calc_crtc(struct dpu_kms *kms, memset(perf, 0, sizeof(struct dpu_core_perf_params)); if (!dpu_cstate->bw_control) { - for (i = 0; i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) { - perf->bw_ctl[i] = kms->catalog->perf.max_bw_high * + perf->bw_ctl = kms->catalog->perf.max_bw_high * 1000ULL; - perf->max_per_pipe_ib[i] = perf->bw_ctl[i]; - } + perf->max_per_pipe_ib = perf->bw_ctl; perf->core_clk_rate = kms->perf.max_core_clk_rate; } else if (kms->perf.perf_tune.mode == DPU_PERF_MODE_MINIMUM) { - for (i = 0; i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) { - perf->bw_ctl[i] = 0; - perf->max_per_pipe_ib[i] = 0; - } + perf->bw_ctl = 0; + perf->max_per_pipe_ib = 0; perf->core_clk_rate = 0; } else if (kms->perf.perf_tune.mode == DPU_PERF_MODE_FIXED) { - for (i = 0; i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) { - perf->bw_ctl[i] = kms->perf.fix_core_ab_vote; - perf->max_per_pipe_ib[i] = kms->perf.fix_core_ib_vote; - } + perf->bw_ctl = kms->perf.fix_core_ab_vote; + perf->max_per_pipe_ib = kms->perf.fix_core_ib_vote; perf->core_clk_rate = kms->perf.fix_core_clk_rate; } DPU_DEBUG( - "crtc=%d clk_rate=%llu core_ib=%llu core_ab=%llu llcc_ib=%llu llcc_ab=%llu mem_ib=%llu mem_ab=%llu\n", + "crtc=%d clk_rate=%llu core_ib=%llu core_ab=%llu\n", crtc->base.id, perf->core_clk_rate, - perf->max_per_pipe_ib[DPU_POWER_HANDLE_DBUS_ID_MNOC], - perf->bw_ctl[DPU_POWER_HANDLE_DBUS_ID_MNOC], - perf->max_per_pipe_ib[DPU_POWER_HANDLE_DBUS_ID_LLCC], - perf->bw_ctl[DPU_POWER_HANDLE_DBUS_ID_LLCC], - perf->max_per_pipe_ib[DPU_POWER_HANDLE_DBUS_ID_EBI], - perf->bw_ctl[DPU_POWER_HANDLE_DBUS_ID_EBI]); + perf->max_per_pipe_ib, perf->bw_ctl); } int dpu_core_perf_crtc_check(struct drm_crtc *crtc, @@ -142,7 +130,6 @@ int dpu_core_perf_crtc_check(struct drm_crtc *crtc, struct dpu_crtc_state *dpu_cstate; struct drm_crtc *tmp_crtc; struct dpu_kms *kms; - int i; if (!crtc || !state) { DPU_ERROR("invalid crtc\n"); @@ -164,31 +151,28 @@ int dpu_core_perf_crtc_check(struct drm_crtc *crtc, /* obtain new values */ _dpu_core_perf_calc_crtc(kms, crtc, state, &dpu_cstate->new_perf); - for (i = DPU_POWER_HANDLE_DBUS_ID_MNOC; - i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) { - bw_sum_of_intfs = dpu_cstate->new_perf.bw_ctl[i]; - curr_client_type = dpu_crtc_get_client_type(crtc); + bw_sum_of_intfs = dpu_cstate->new_perf.bw_ctl; + curr_client_type = dpu_crtc_get_client_type(crtc); - drm_for_each_crtc(tmp_crtc, crtc->dev) { - if (_dpu_core_perf_crtc_is_power_on(tmp_crtc) && - (dpu_crtc_get_client_type(tmp_crtc) == - curr_client_type) && - (tmp_crtc != crtc)) { - struct dpu_crtc_state *tmp_cstate = - to_dpu_crtc_state(tmp_crtc->state); - - DPU_DEBUG("crtc:%d bw:%llu ctrl:%d\n", - tmp_crtc->base.id, - tmp_cstate->new_perf.bw_ctl[i], - tmp_cstate->bw_control); - /* - * For bw check only use the bw if the - * atomic property has been already set - */ - if (tmp_cstate->bw_control) - bw_sum_of_intfs += - tmp_cstate->new_perf.bw_ctl[i]; - } + drm_for_each_crtc(tmp_crtc, crtc->dev) { + if (_dpu_core_perf_crtc_is_power_on(tmp_crtc) && + (dpu_crtc_get_client_type(tmp_crtc) == + curr_client_type) && + (tmp_crtc != crtc)) { + struct dpu_crtc_state *tmp_cstate = + to_dpu_crtc_state(tmp_crtc->state); + + DPU_DEBUG("crtc:%d bw:%llu ctrl:%d\n", + tmp_crtc->base.id, + tmp_cstate->new_perf.bw_ctl, + tmp_cstate->bw_control); + /* + * For bw check only use the bw if the + * atomic property has been already set + */ + if (tmp_cstate->bw_control) + bw_sum_of_intfs += + tmp_cstate->new_perf.bw_ctl; } /* convert bandwidth to kb */ @@ -219,9 +203,9 @@ int dpu_core_perf_crtc_check(struct drm_crtc *crtc, } static int _dpu_core_perf_crtc_update_bus(struct dpu_kms *kms, - struct drm_crtc *crtc, u32 bus_id) + struct drm_crtc *crtc) { - struct dpu_core_perf_params perf = { { 0 } }; + struct dpu_core_perf_params perf = { 0 }; enum dpu_crtc_client_type curr_client_type = dpu_crtc_get_client_type(crtc); struct drm_crtc *tmp_crtc; @@ -234,13 +218,12 @@ static int _dpu_core_perf_crtc_update_bus(struct dpu_kms *kms, dpu_crtc_get_client_type(tmp_crtc)) { dpu_cstate = to_dpu_crtc_state(tmp_crtc->state); - perf.max_per_pipe_ib[bus_id] = - max(perf.max_per_pipe_ib[bus_id], - dpu_cstate->new_perf.max_per_pipe_ib[bus_id]); + perf.max_per_pipe_ib = + max(perf.max_per_pipe_ib, + dpu_cstate->new_perf.max_per_pipe_ib); - DPU_DEBUG("crtc=%d bus_id=%d bw=%llu\n", - tmp_crtc->base.id, bus_id, - dpu_cstate->new_perf.bw_ctl[bus_id]); + DPU_DEBUG("crtc=%d bw=%llu\n", + tmp_crtc->base.id, dpu_cstate->new_perf.bw_ctl); } } return ret; @@ -260,7 +243,6 @@ void dpu_core_perf_crtc_release_bw(struct drm_crtc *crtc) struct dpu_crtc *dpu_crtc; struct dpu_crtc_state *dpu_cstate; struct dpu_kms *kms; - int i; if (!crtc) { DPU_ERROR("invalid crtc\n"); @@ -296,10 +278,8 @@ void dpu_core_perf_crtc_release_bw(struct drm_crtc *crtc) if (kms->perf.enable_bw_release) { trace_dpu_cmd_release_bw(crtc->base.id); DPU_DEBUG("Release BW crtc=%d\n", crtc->base.id); - for (i = 0; i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) { - dpu_crtc->cur_perf.bw_ctl[i] = 0; - _dpu_core_perf_crtc_update_bus(kms, crtc, i); - } + dpu_crtc->cur_perf.bw_ctl = 0; + _dpu_core_perf_crtc_update_bus(kms, crtc); } } @@ -342,11 +322,10 @@ int dpu_core_perf_crtc_update(struct drm_crtc *crtc, int params_changed, bool stop_req) { struct dpu_core_perf_params *new, *old; - int update_bus = 0, update_clk = 0; + bool update_bus = false, update_clk = false; u64 clk_rate = 0; struct dpu_crtc *dpu_crtc; struct dpu_crtc_state *dpu_cstate; - int i; struct msm_drm_private *priv; struct dpu_kms *kms; int ret; @@ -373,7 +352,6 @@ int dpu_core_perf_crtc_update(struct drm_crtc *crtc, new = &dpu_cstate->new_perf; if (_dpu_core_perf_crtc_is_power_on(crtc) && !stop_req) { - for (i = 0; i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) { /* * cases for bus bandwidth update. * 1. new bandwidth vote - "ab or ib vote" is higher @@ -381,23 +359,22 @@ int dpu_core_perf_crtc_update(struct drm_crtc *crtc, * 2. new bandwidth vote - "ab or ib vote" is lower * than current vote at end of commit or stop. */ - if ((params_changed && ((new->bw_ctl[i] > - old->bw_ctl[i]) || - (new->max_per_pipe_ib[i] > - old->max_per_pipe_ib[i]))) || - (!params_changed && ((new->bw_ctl[i] < - old->bw_ctl[i]) || - (new->max_per_pipe_ib[i] < - old->max_per_pipe_ib[i])))) { + if ((params_changed && ((new->bw_ctl > + old->bw_ctl) || + (new->max_per_pipe_ib > + old->max_per_pipe_ib))) || + (!params_changed && ((new->bw_ctl < + old->bw_ctl) || + (new->max_per_pipe_ib < + old->max_per_pipe_ib)))) { DPU_DEBUG( "crtc=%d p=%d new_bw=%llu,old_bw=%llu\n", crtc->base.id, params_changed, - new->bw_ctl[i], old->bw_ctl[i]); - old->bw_ctl[i] = new->bw_ctl[i]; - old->max_per_pipe_ib[i] = - new->max_per_pipe_ib[i]; - update_bus |= BIT(i); - } + new->bw_ctl, old->bw_ctl); + old->bw_ctl = new->bw_ctl; + old->max_per_pipe_ib = + new->max_per_pipe_ib; + update_bus = true; } if ((params_changed && @@ -405,30 +382,26 @@ int dpu_core_perf_crtc_update(struct drm_crtc *crtc, (!params_changed && (new->core_clk_rate < old->core_clk_rate))) { old->core_clk_rate = new->core_clk_rate; - update_clk = 1; + update_clk = true; } } else { DPU_DEBUG("crtc=%d disable\n", crtc->base.id); memset(old, 0, sizeof(*old)); memset(new, 0, sizeof(*new)); - update_bus = ~0; - update_clk = 1; + update_bus = true; + update_clk = true; } + trace_dpu_perf_crtc_update(crtc->base.id, - new->bw_ctl[DPU_POWER_HANDLE_DBUS_ID_MNOC], - new->bw_ctl[DPU_POWER_HANDLE_DBUS_ID_LLCC], - new->bw_ctl[DPU_POWER_HANDLE_DBUS_ID_EBI], - new->core_clk_rate, stop_req, - update_bus, update_clk); - - for (i = 0; i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) { - if (update_bus & BIT(i)) { - ret = _dpu_core_perf_crtc_update_bus(kms, crtc, i); - if (ret) { - DPU_ERROR("crtc-%d: failed to update bw vote for bus-%d\n", - crtc->base.id, i); - return ret; - } + new->bw_ctl, new->core_clk_rate, + stop_req, update_bus, update_clk); + + if (update_bus) { + ret = _dpu_core_perf_crtc_update_bus(kms, crtc); + if (ret) { + DPU_ERROR("crtc-%d: failed to update bus bw vote\n", + crtc->base.id); + return ret; } } diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h index fbcbe0c7527a..0fb276929dc5 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h @@ -30,8 +30,8 @@ * @core_clk_rate: core clock rate request */ struct dpu_core_perf_params { - u64 max_per_pipe_ib[DPU_POWER_HANDLE_DBUS_ID_MAX]; - u64 bw_ctl[DPU_POWER_HANDLE_DBUS_ID_MAX]; + u64 max_per_pipe_ib; + u64 bw_ctl; u64 core_clk_rate; }; diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c index c5ba753d441c..841476d77f5c 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c @@ -1373,21 +1373,14 @@ static int dpu_crtc_debugfs_state_show(struct seq_file *s, void *v) { struct drm_crtc *crtc = (struct drm_crtc *) s->private; struct dpu_crtc *dpu_crtc = to_dpu_crtc(crtc); - int i; seq_printf(s, "client type: %d\n", dpu_crtc_get_client_type(crtc)); seq_printf(s, "intf_mode: %d\n", dpu_crtc_get_intf_mode(crtc)); seq_printf(s, "core_clk_rate: %llu\n", dpu_crtc->cur_perf.core_clk_rate); - for (i = DPU_POWER_HANDLE_DBUS_ID_MNOC; - i < DPU_POWER_HANDLE_DBUS_ID_MAX; i++) { - seq_printf(s, "bw_ctl[%s]: %llu\n", - dpu_power_handle_get_dbus_name(i), - dpu_crtc->cur_perf.bw_ctl[i]); - seq_printf(s, "max_per_pipe_ib[%s]: %llu\n", - dpu_power_handle_get_dbus_name(i), - dpu_crtc->cur_perf.max_per_pipe_ib[i]); - } + seq_printf(s, "bw_ctl: %llu\n", dpu_crtc->cur_perf.bw_ctl); + seq_printf(s, "max_per_pipe_ib: %llu\n", + dpu_crtc->cur_perf.max_per_pipe_ib); return 0; } diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.c index fc14116789f2..d58d01544731 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.c @@ -24,20 +24,6 @@ #include "dpu_power_handle.h" #include "dpu_trace.h" -static const char *data_bus_name[DPU_POWER_HANDLE_DBUS_ID_MAX] = { - [DPU_POWER_HANDLE_DBUS_ID_MNOC] = "qcom,dpu-data-bus", - [DPU_POWER_HANDLE_DBUS_ID_LLCC] = "qcom,dpu-llcc-bus", - [DPU_POWER_HANDLE_DBUS_ID_EBI] = "qcom,dpu-ebi-bus", -}; - -const char *dpu_power_handle_get_dbus_name(u32 bus_id) -{ - if (bus_id < DPU_POWER_HANDLE_DBUS_ID_MAX) - return data_bus_name[bus_id]; - - return NULL; -} - static void dpu_power_event_trigger_locked(struct dpu_power_handle *phandle, u32 event_type) { @@ -66,7 +52,6 @@ struct dpu_power_client *dpu_power_client_create( mutex_lock(&phandle->phandle_lock); strlcpy(client->name, client_name, MAX_CLIENT_NAME_LEN); - client->usecase_ndx = VOTE_INDEX_DISABLE; client->id = id; client->active = true; pr_debug("client %s created:%pK id :%d\n", client_name, @@ -143,8 +128,6 @@ int dpu_power_resource_enable(struct dpu_power_handle *phandle, struct dpu_power_client *pclient, bool enable) { bool changed = false; - u32 max_usecase_ndx = VOTE_INDEX_DISABLE, prev_usecase_ndx; - struct dpu_power_client *client; u32 event_type; if (!phandle || !pclient) { @@ -153,31 +136,19 @@ int dpu_power_resource_enable(struct dpu_power_handle *phandle, } mutex_lock(&phandle->phandle_lock); - if (enable) + if (enable) { pclient->refcount++; - else if (pclient->refcount) + if (pclient->refcount == 1) + changed = true; + } else if (pclient->refcount) { pclient->refcount--; - - if (pclient->refcount) - pclient->usecase_ndx = VOTE_INDEX_LOW; - else - pclient->usecase_ndx = VOTE_INDEX_DISABLE; - - list_for_each_entry(client, &phandle->power_client_clist, list) { - if (client->usecase_ndx < VOTE_INDEX_MAX && - client->usecase_ndx > max_usecase_ndx) - max_usecase_ndx = client->usecase_ndx; - } - - if (phandle->current_usecase_ndx != max_usecase_ndx) { - changed = true; - prev_usecase_ndx = phandle->current_usecase_ndx; - phandle->current_usecase_ndx = max_usecase_ndx; + if (!pclient->refcount) + changed = true; } - pr_debug("%pS: changed=%d current idx=%d request client %s id:%u enable:%d refcount:%d\n", - __builtin_return_address(0), changed, max_usecase_ndx, - pclient->name, pclient->id, enable, pclient->refcount); + pr_debug("%pS:changed=%d client %s id:%u enable:%d refcount:%d\n", + __builtin_return_address(0), changed, pclient->name, + pclient->id, enable, pclient->refcount); if (!changed) goto end; diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.h index a65b7a297f21..b1a5ae4d6f4e 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.h +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.h @@ -16,76 +16,28 @@ #define MAX_CLIENT_NAME_LEN 128 -#define DPU_POWER_HANDLE_ENABLE_BUS_AB_QUOTA 0 -#define DPU_POWER_HANDLE_DISABLE_BUS_AB_QUOTA 0 -#define DPU_POWER_HANDLE_ENABLE_BUS_IB_QUOTA 1600000000 -#define DPU_POWER_HANDLE_DISABLE_BUS_IB_QUOTA 0 - #include "dpu_io_util.h" /* events will be triggered on power handler enable/disable */ #define DPU_POWER_EVENT_DISABLE BIT(0) #define DPU_POWER_EVENT_ENABLE BIT(1) -/** - * mdss_bus_vote_type: register bus vote type - * VOTE_INDEX_DISABLE: removes the client vote - * VOTE_INDEX_LOW: keeps the lowest vote for register bus - * VOTE_INDEX_MAX: invalid - */ -enum mdss_bus_vote_type { - VOTE_INDEX_DISABLE, - VOTE_INDEX_LOW, - VOTE_INDEX_MAX, -}; - -/** - * enum dpu_power_handle_data_bus_client - type of axi bus clients - * @DPU_POWER_HANDLE_DATA_BUS_CLIENT_RT: core real-time bus client - * @DPU_POWER_HANDLE_DATA_BUS_CLIENT_NRT: core non-real-time bus client - * @DPU_POWER_HANDLE_DATA_BUS_CLIENT_MAX: maximum number of bus client type - */ -enum dpu_power_handle_data_bus_client { - DPU_POWER_HANDLE_DATA_BUS_CLIENT_RT, - DPU_POWER_HANDLE_DATA_BUS_CLIENT_NRT, - DPU_POWER_HANDLE_DATA_BUS_CLIENT_MAX -}; - -/** - * enum DPU_POWER_HANDLE_DBUS_ID - data bus identifier - * @DPU_POWER_HANDLE_DBUS_ID_MNOC: DPU/MNOC data bus - * @DPU_POWER_HANDLE_DBUS_ID_LLCC: MNOC/LLCC data bus - * @DPU_POWER_HANDLE_DBUS_ID_EBI: LLCC/EBI data bus - */ -enum DPU_POWER_HANDLE_DBUS_ID { - DPU_POWER_HANDLE_DBUS_ID_MNOC, - DPU_POWER_HANDLE_DBUS_ID_LLCC, - DPU_POWER_HANDLE_DBUS_ID_EBI, - DPU_POWER_HANDLE_DBUS_ID_MAX, -}; - /** * struct dpu_power_client: stores the power client for dpu driver * @name: name of the client - * @usecase_ndx: current regs bus vote type * @refcount: current refcount if multiple modules are using same * same client for enable/disable. Power module will * aggregate the refcount and vote accordingly for this * client. * @id: assigned during create. helps for debugging. * @list: list to attach power handle master list - * @ab: arbitrated bandwidth for each bus client - * @ib: instantaneous bandwidth for each bus client * @active: inidcates the state of dpu power handle */ struct dpu_power_client { char name[MAX_CLIENT_NAME_LEN]; - short usecase_ndx; short refcount; u32 id; struct list_head list; - u64 ab[DPU_POWER_HANDLE_DATA_BUS_CLIENT_MAX]; - u64 ib[DPU_POWER_HANDLE_DATA_BUS_CLIENT_MAX]; bool active; }; @@ -112,14 +64,12 @@ struct dpu_power_event { * @client_clist: master list to store all clients * @phandle_lock: lock to synchronize the enable/disable * @dev: pointer to device structure - * @usecase_ndx: current usecase index * @event_list: current power handle event list */ struct dpu_power_handle { struct list_head power_client_clist; struct mutex phandle_lock; struct device *dev; - u32 current_usecase_ndx; struct list_head event_list; }; @@ -172,17 +122,6 @@ void dpu_power_client_destroy(struct dpu_power_handle *phandle, int dpu_power_resource_enable(struct dpu_power_handle *pdata, struct dpu_power_client *pclient, bool enable); -/** - * dpu_power_data_bus_bandwidth_ctrl() - control data bus bandwidth enable - * @phandle: power handle containing the resources - * @client: client information to bandwidth control - * @enable: true to enable bandwidth for data base - * - * Return: none - */ -void dpu_power_data_bus_bandwidth_ctrl(struct dpu_power_handle *phandle, - struct dpu_power_client *pclient, int enable); - /** * dpu_power_handle_register_event - register a callback function for an event. * Clients can register for multiple events with a single register. @@ -207,11 +146,4 @@ struct dpu_power_event *dpu_power_handle_register_event( void dpu_power_handle_unregister_event(struct dpu_power_handle *phandle, struct dpu_power_event *event); -/** - * dpu_power_handle_get_dbus_name - get name of given data bus identifier - * @bus_id: data bus identifier - * Return: Pointer to name string if success; NULL otherwise - */ -const char *dpu_power_handle_get_dbus_name(u32 bus_id); - #endif /* _DPU_POWER_HANDLE_H_ */ diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_trace.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_trace.h index 0c122e173892..f5ed47a1556a 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_trace.h +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_trace.h @@ -167,16 +167,13 @@ TRACE_EVENT(dpu_trace_counter, ) TRACE_EVENT(dpu_perf_crtc_update, - TP_PROTO(u32 crtc, u64 bw_ctl_mnoc, u64 bw_ctl_llcc, - u64 bw_ctl_ebi, u32 core_clk_rate, - bool stop_req, u32 update_bus, u32 update_clk), - TP_ARGS(crtc, bw_ctl_mnoc, bw_ctl_llcc, bw_ctl_ebi, core_clk_rate, + TP_PROTO(u32 crtc, u64 bw_ctl, u32 core_clk_rate, + bool stop_req, bool update_bus, bool update_clk), + TP_ARGS(crtc, bw_ctl, core_clk_rate, stop_req, update_bus, update_clk), TP_STRUCT__entry( __field(u32, crtc) - __field(u64, bw_ctl_mnoc) - __field(u64, bw_ctl_llcc) - __field(u64, bw_ctl_ebi) + __field(u64, bw_ctl) __field(u32, core_clk_rate) __field(bool, stop_req) __field(u32, update_bus) @@ -184,20 +181,16 @@ TRACE_EVENT(dpu_perf_crtc_update, ), TP_fast_assign( __entry->crtc = crtc; - __entry->bw_ctl_mnoc = bw_ctl_mnoc; - __entry->bw_ctl_llcc = bw_ctl_llcc; - __entry->bw_ctl_ebi = bw_ctl_ebi; + __entry->bw_ctl = bw_ctl; __entry->core_clk_rate = core_clk_rate; __entry->stop_req = stop_req; __entry->update_bus = update_bus; __entry->update_clk = update_clk; ), TP_printk( - "crtc=%d bw_mnoc=%llu bw_llcc=%llu bw_ebi=%llu clk_rate=%u stop_req=%d u_bus=%d u_clk=%d", + "crtc=%d bw_ctl=%llu clk_rate=%u stop_req=%d u_bus=%d u_clk=%d", __entry->crtc, - __entry->bw_ctl_mnoc, - __entry->bw_ctl_llcc, - __entry->bw_ctl_ebi, + __entry->bw_ctl, __entry->core_clk_rate, __entry->stop_req, __entry->update_bus,
Since the upstream interconnect bus framework has landed upstream, the existing references of custom bus scaling needs to be cleaned up. Changes in v2: - Fixed build error due to partial clean up Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> --- drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c | 157 ++++++++++------------- drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h | 4 +- drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 13 +- drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.c | 47 ++----- drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.h | 68 ---------- drivers/gpu/drm/msm/disp/dpu1/dpu_trace.h | 21 +-- 6 files changed, 86 insertions(+), 224 deletions(-)