docker: dockerfile for openSUSE Leap

Commit Message

Dario Faggioli Nov. 16, 2018, 5:10 p.m. UTC

Dockerfile for building an openSUSE Leap container.

Tracks the latest release (at the time of writing this
patch, it is Leap 15).

Signed-off-by: Dario Faggioli <[e-mail]>
---
Cc: "Alex Bennée" <[e-mail]>
Cc: Fam Zheng <[e-mail]>
Cc: "Philippe Mathieu-Daudé" <[e-mail]>
---
 tests/docker/dockerfiles/opensuse-leap.docker |   62 +++++++++++++++++++++++++
 1 file changed, 62 insertions(+)
 create mode 100644 tests/docker/dockerfiles/opensuse-leap.docker

Comments

Alex Bennée Nov. 18, 2018, 7:47 p.m. UTC | #1

Dario Faggioli <[e-mail]> writes:

> Dockerfile for building an openSUSE Leap container.
>
> Tracks the latest release (at the time of writing this
> patch, it is Leap 15).
>
> Signed-off-by: Dario Faggioli <[e-mail]>
> ---
> Cc: "Alex Bennée" <[e-mail]>
> Cc: Fam Zheng <[e-mail]>
> Cc: "Philippe Mathieu-Daudé" <[e-mail]>
> ---
>  tests/docker/dockerfiles/opensuse-leap.docker |   62 +++++++++++++++++++++++++
>  1 file changed, 62 insertions(+)
>  create mode 100644 tests/docker/dockerfiles/opensuse-leap.docker
>
> diff --git a/tests/docker/dockerfiles/opensuse-leap.docker b/tests/docker/dockerfiles/opensuse-leap.docker
> new file mode 100644
> index 0000000000..9d00861e66
> --- /dev/null
> +++ b/tests/docker/dockerfiles/opensuse-leap.docker
> @@ -0,0 +1,62 @@
> +FROM opensuse/leap
> +ENV PACKAGES \
<snip>
> +    tar \
> +    usbredir-devel \
> +    virglrenderer-devel \
> +    vte-devel \
> +    which \
> +    xen-devel
> +    zlib-devel \

This hasn't been tested because the docker image fails to build due to
continuation breakage.

--
Alex Bennée

Dario Faggioli Nov. 18, 2018, 9:40 p.m. UTC | #2

On Sun, 2018-11-18 at 19:47 +0000, Alex Bennée wrote:
> Dario Faggioli <[e-mail]> writes:
> 
> > Dockerfile for building an openSUSE Leap container.
> > 
> > Tracks the latest release (at the time of writing this
> > patch, it is Leap 15).
> > 
> > Signed-off-by: Dario Faggioli <[e-mail]>
> > ---
> > Cc: "Alex Bennée" <[e-mail]>
> > Cc: Fam Zheng <[e-mail]>
> > Cc: "Philippe Mathieu-Daudé" <[e-mail]>
> > ---
> >  tests/docker/dockerfiles/opensuse-leap.docker |   62
> > +++++++++++++++++++++++++
> >  1 file changed, 62 insertions(+)
> >  create mode 100644 tests/docker/dockerfiles/opensuse-leap.docker
> > 
> > diff --git a/tests/docker/dockerfiles/opensuse-leap.docker
> > b/tests/docker/dockerfiles/opensuse-leap.docker
> > new file mode 100644
> > index 0000000000..9d00861e66
> > --- /dev/null
> > +++ b/tests/docker/dockerfiles/opensuse-leap.docker
> > @@ -0,0 +1,62 @@
> > +FROM opensuse/leap
> > +ENV PACKAGES \
> <snip>
> > +    tar \
> > +    usbredir-devel \
> > +    virglrenderer-devel \
> > +    vte-devel \
> > +    which \
> > +    xen-devel
> > +    zlib-devel \
> 
> This hasn't been tested because the docker image fails to build due
> to
> continuation breakage.
>
It is indeed broken.

Basically, I tested it thoroughly, and I'm quite sure it works ok
(although, I'm no docker expert).

Then, when I was about to send the mail, I saw in another commit that
it was best to have the package list sorted; so I did that, and forgot
to adjust the continuation. :-(

Sorry.

I'll send a v2 with this fixed.

Thanks and Regards,
Dario

Philippe Mathieu-Daudé Nov. 19, 2018, 12:02 a.m. UTC | #3

Hi Dario,

On Sun, Nov 18, 2018 at 10:54 PM Dario Faggioli <[e-mail]> wrote:
>
> On Sun, 2018-11-18 at 19:47 +0000, Alex Bennée wrote:
> > Dario Faggioli <[e-mail]> writes:
> >
> > > Dockerfile for building an openSUSE Leap container.
> > >
> > > Tracks the latest release (at the time of writing this
> > > patch, it is Leap 15).
> > >
> > > Signed-off-by: Dario Faggioli <[e-mail]>
> > > ---
> > > Cc: "Alex Bennée" <[e-mail]>
> > > Cc: Fam Zheng <[e-mail]>
> > > Cc: "Philippe Mathieu-Daudé" <[e-mail]>
> > > ---
> > >  tests/docker/dockerfiles/opensuse-leap.docker |   62
> > > +++++++++++++++++++++++++
> > >  1 file changed, 62 insertions(+)
> > >  create mode 100644 tests/docker/dockerfiles/opensuse-leap.docker
> > >
> > > diff --git a/tests/docker/dockerfiles/opensuse-leap.docker
> > > b/tests/docker/dockerfiles/opensuse-leap.docker
> > > new file mode 100644
> > > index 0000000000..9d00861e66
> > > --- /dev/null
> > > +++ b/tests/docker/dockerfiles/opensuse-leap.docker
> > > @@ -0,0 +1,62 @@
> > > +FROM opensuse/leap
> > > +ENV PACKAGES \
> > <snip>
> > > +    tar \
> > > +    usbredir-devel \
> > > +    virglrenderer-devel \
> > > +    vte-devel \
> > > +    which \
> > > +    xen-devel
> > > +    zlib-devel \
> >
> > This hasn't been tested because the docker image fails to build due
> > to
> > continuation breakage.
> >
> It is indeed broken.
>
> Basically, I tested it thoroughly, and I'm quite sure it works ok
> (although, I'm no docker expert).

I quickly fixed/tried it.
First this package list pulls many unuseful system packages.
I added '--no-recommends' to reduce a bit:

RUN zypper ref && \
    zypper up -y && \
    zypper install -y --no-recommends $PACKAGES

This still install a bunch of unnecessary stuffs:

Creating group systemd-journal with gid 485.
Creating group systemd-network with gid 484.
Creating user systemd-network (systemd Network Management) with uid
484 and gid 484.
Creating group systemd-coredump with gid 483.
Creating user systemd-coredump (systemd Core Dumper) with uid 483 and gid 483.
Creating group systemd-timesync with gid 482.
Creating user systemd-timesync (systemd Time Synchronization) with uid
482 and gid 482.
Failed to connect to bus: No such file or directory

Then the resulting image takes the same than without --no-recommends:
1.1GB. No idea why.
At some point some package tried to talk to the network manager via
DBus to start sshd...

Second, while this works on x86_64, it fails on aarch64:

Problem: libcurl-devel-7.59.0-lp150.1.2.aarch64 requires libcurl4 =
7.59.0, but this requirement cannot be provided
  not installable providers: libcurl4-7.59.0-lp150.1.2.aarch64[repo-oss]
 Solution 1: downgrade of libcurl4-7.60.0-lp150.2.15.1.aarch64 to
libcurl4-7.59.0-lp150.1.2.aarch64
 Solution 2: do not install libcurl-devel-7.59.0-lp150.1.2.aarch64
 Solution 3: break libcurl-devel-7.59.0-lp150.1.2.aarch64 by ignoring
some of its dependencies

Not your fault. So I suppose you are planning to use this image to
compile QEMU for openSUSE/x86_64 only, is this correct?

Regards,

Phil.

>
> Then, when I was about to send the mail, I saw in another commit that
> it was best to have the package list sorted; so I did that, and forgot
> to adjust the continuation. :-(
>
> Sorry.
>
> I'll send a v2 with this fixed.
>
> Thanks and Regards,
> Dario
> --
> <<This happens because I choose it to happen!>> (Raistlin Majere)
> -----------------------------------------------------------------
> Dario Faggioli, Ph.D, http://about.me/dario.faggioli
> Software Engineer @ SUSE https://www.suse.com/

Dario Faggioli Nov. 19, 2018, 4:12 p.m. UTC | #4

On Mon, 2018-11-19 at 01:02 +0100, Philippe Mathieu-Daudé wrote:
> Hi Dario,
> 
Hi,

> On Sun, Nov 18, 2018 at 10:54 PM Dario Faggioli <[e-mail]>
> wrote:
> > On Sun, 2018-11-18 at 19:47 +0000, Alex Bennée wrote:
> > > This hasn't been tested because the docker image fails to build
> > > due
> > > to
> > > continuation breakage.
> > > 
> > It is indeed broken.
> > 
> > Basically, I tested it thoroughly, and I'm quite sure it works ok
> > (although, I'm no docker expert).
> 
> I quickly fixed/tried it.
>
Cool, thanks for having a look. :-)

> First this package list pulls many unuseful system packages.
> I added '--no-recommends' to reduce a bit:
> 
> RUN zypper ref && \
>     zypper up -y && \
>     zypper install -y --no-recommends $PACKAGES
> 
Right, that makes sense. I'll add it.

> This still install a bunch of unnecessary stuffs:
> 
> Creating group systemd-journal with gid 485.
> Creating group systemd-network with gid 484.
> Creating user systemd-network (systemd Network Management) with uid
> 484 and gid 484.
> Creating group systemd-coredump with gid 483.
> Creating user systemd-coredump (systemd Core Dumper) with uid 483 and
> gid 483.
> Creating group systemd-timesync with gid 482.
> Creating user systemd-timesync (systemd Time Synchronization) with
> uid
> 482 and gid 482.
> Failed to connect to bus: No such file or directory
> 
> Then the resulting image takes the same than without --no-recommends:
> 1.1GB. No idea why.
>
So, my "model" was the fedora.docker dockerfile, where quite a few
package are also installed, much more than the bare minimum necessary
for a build to succeed (AFAICT, at least).

The idea would be to enable and include support for as many
features/backends/integrations/etc as possible, in order to test them.

Basically, I did this by trial-and-error, i.e., adding packages related
to entries in `./configure' which looked like 'no', and keeping them
(only) if they turned such entry to 'yes'.

Now, this is what I see on my system, and that's why size did not
concerned me: :-)

REPOSITORY   TAG             IMAGE ID       CREATED       SIZE
qemu         opensuse-leap   6bd6bc2ac139   4 hours ago   1.09GB
qemu         fedora          1b05e254d0d9   5 hours ago   2.02GB

If this is not ok, I'm happy to try to shrink the image size a bit
(e.g., I'll double check if there are useless packages left in place),
and/or to put together another dockerfile (something like opensuse-
leap_minimal), with just what is necessary for the build (and the
tests) to succeed.

> At some point some package tried to talk to the network manager via
> DBus to start sshd...
> 
Ah, interesting. :-P

So, from where did you see this (as well as the logs above) logs?
Running `make docker-***' with 'V=1', I'm guessing?

> Second, while this works on x86_64, it fails on aarch64:
> 
> Problem: libcurl-devel-7.59.0-lp150.1.2.aarch64 requires libcurl4 =
> 7.59.0, but this requirement cannot be provided
>   not installable providers: libcurl4-7.59.0-lp150.1.2.aarch64[repo-
> oss]
>  Solution 1: downgrade of libcurl4-7.60.0-lp150.2.15.1.aarch64 to
> libcurl4-7.59.0-lp150.1.2.aarch64
>  Solution 2: do not install libcurl-devel-7.59.0-lp150.1.2.aarch64
>  Solution 3: break libcurl-devel-7.59.0-lp150.1.2.aarch64 by ignoring
> some of its dependencies
> 
Ok, I see.

> Not your fault. So I suppose you are planning to use this image to
> compile QEMU for openSUSE/x86_64 only, is this correct?
> 
Yes, basically, x86_64 is my main usecase, and the (only) setup I can
test quickly and easily enough. However, I'm certainly up for trying to
improve this, and make this dockerfile useful for other arches as well.

I'll try to look into this. How did you test this on aarch64? On a
native ARM host, or using QEMU?

Thanks again and Regards,
Dario

Patch

diff --git a/tests/docker/dockerfiles/opensuse-leap.docker b/tests/docker/dockerfiles/opensuse-leap.docker
new file mode 100644
index 0000000000..9d00861e66
--- /dev/null
+++ b/tests/docker/dockerfiles/opensuse-leap.docker
@@ -0,0 +1,62 @@ 
+FROM opensuse/leap
+ENV PACKAGES \
+    bc \
+    bison \
+    bluez-devel \
+    brlapi-devel \
+    bzip2 \
+    flex \
+    gcc \
+    gcc-c++ \
+    gettext-tools \
+    git \
+    glib2-devel \
+    glusterfs-devel \
+    gtk3-devel \
+    gtkglext-devel \
+    gzip \
+    hostname \
+    libSDL2-devel \
+    libaio-devel \
+    libasan4 \
+    libcap-devel \
+    libcap-ng-devel \
+    libcurl-devel \
+    libfdt-devel \
+    libgcrypt-devel \
+    libgnutls-devel \
+    libjpeg62-devel \
+    libnettle-devel \
+    libnuma-devel \
+    libpixman-1-0-devel \
+    libpng16-devel \
+    librbd-devel \
+    libspice-server-devel \
+    libssh2-devel \
+    libtasn1-devel \
+    libxml2-devel \
+    lzo-devel \
+    make \
+    ncurses-devel \
+    perl \
+    pkg-config \
+    python3 \
+    python3-PyYAML \
+    snappy-devel \
+    sparse \
+    tar \
+    usbredir-devel \
+    virglrenderer-devel \
+    vte-devel \
+    which \
+    xen-devel
+    zlib-devel \
+ENV QEMU_CONFIGURE_OPTS --python=/usr/bin/python3
+
+ENV LANG en_US.UTF-8
+ENV LANGUAGE en_US:en
+ENV LC_ALL en_US.UTF-8
+
+RUN zypper ref && zypper up -y
+RUN zypper install -y $PACKAGES
+RUN rpm -q $PACKAGES | sort > /packages.txt