| Message ID | 20181122090740.29739-1-narmstrong@baylibre.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | Amlogic Meson cleanup for AXG SoC support | expand |
Hi Tom, On 22/11/2018 10:07, Neil Armstrong wrote: > This patchset will refactor the Amlogic Meson SoC support in order to > easily add support for the Amlogic AXg SoC family, and later the G12x SoCs. > > In order : > - Cleanup the mach-meson configs > - Move board support to reference design common boards > - Move board Kconfig into mach-meson > - Add AXG pinctrl & clock support > - Add AXG device tree and mach-meson support > - Add support for S400 reference design > - Do a final factorization of the code > - Add USB boot support in U-boot > > At the end of the patches, the board code is lighter and we maintain > only the reference designs, where each board will differ in the defconfig. > > It will be simpler to add custom board support for future boards with > more changes against the reference designs. > > The complete AXG support depends on the : > - mmc: meson-gx: Add AXG compatible > - net: designware: add meson meson axg compatible > patches submitted to the U-Boot mailing list.Hi Would it be simpler if I send you a pull-request with this patchset and all dependencies ? Tell me if you have any comments on the patchset and the 2 dependencies ! Thanks, Neil > > Changes since v1: > - Fixed AXG pinctrl request and AO pin count > - Fixed tabs/spaces issues on s400 README > > Jerome Brunet (12): > ARM: meson: clean-up platform selection > configs: meson: remove unnecessary MESON_FDTFILE_SETTING > board: amlogic: remove p212 derivatives > board: amlogic: factorise gxbb boards > ARM: rework amlogic configuration > configs: meson: change default load addresses > pinctrl: meson: rework gx pmx function > pinctrl: meson: select generic pinctrl > pinctrl: meson: add axg support > clk: meson: silence debug print > ARM: meson: rework soc arch file to prepare for new SoC > ARM: meson: factorize common code out amlogic's boards > > Neil Armstrong (7): > board: amlogic: move khadas-vim2 as q200 ref board > clk: meson: add static to meson_gates table > ARM: meson: Add support for AXG family > ARM: dts: Sync Amlogic Meson AXG DT from Linux 4.20-rc1 > clk: Add clock driver for AXG > board: amlogic: add support for S400 board > ARM: meson: Add boot device discovery > > arch/arm/dts/Makefile | 3 +- > arch/arm/dts/meson-axg-s400.dts | 554 ++++++ > arch/arm/dts/meson-axg.dtsi | 1589 +++++++++++++++++ > arch/arm/include/asm/arch-meson/axg.h | 52 + > arch/arm/include/asm/arch-meson/boot.h | 20 + > arch/arm/include/asm/arch-meson/clock-axg.h | 104 ++ > .../asm/arch-meson/{clock.h => clock-gx.h} | 4 +- > arch/arm/include/asm/arch-meson/eth.h | 6 +- > arch/arm/include/asm/arch-meson/gx.h | 1 + > arch/arm/include/asm/arch-meson/mem.h | 3 +- > arch/arm/mach-meson/Kconfig | 132 +- > arch/arm/mach-meson/Makefile | 4 +- > arch/arm/mach-meson/board-axg.c | 118 ++ > arch/arm/mach-meson/board-common.c | 117 ++ > arch/arm/mach-meson/{board.c => board-gx.c} | 106 +- > arch/arm/mach-meson/eth.c | 53 - > arch/arm/mach-meson/sm.c | 1 - > board/amlogic/khadas-vim/Kconfig | 12 - > board/amlogic/khadas-vim/MAINTAINERS | 6 - > board/amlogic/khadas-vim/khadas-vim.c | 57 - > board/amlogic/khadas-vim2/Kconfig | 12 - > board/amlogic/libretech-cc/Kconfig | 12 - > board/amlogic/libretech-cc/MAINTAINERS | 6 - > board/amlogic/libretech-cc/Makefile | 6 - > board/amlogic/libretech-cc/libretech-cc.c | 57 - > board/amlogic/nanopi-k2/Kconfig | 12 - > board/amlogic/nanopi-k2/MAINTAINERS | 6 - > board/amlogic/nanopi-k2/Makefile | 7 - > board/amlogic/nanopi-k2/nanopi-k2.c | 55 - > board/amlogic/odroid-c2/Kconfig | 12 - > board/amlogic/odroid-c2/MAINTAINERS | 1 + > .../README => odroid-c2/README.nanopi-k2} | 0 > .../odroid-c2/{README => README.odroid-c2} | 0 > board/amlogic/odroid-c2/odroid-c2.c | 16 +- > board/amlogic/p212/Kconfig | 12 - > .../README => p212/README.khadas-vim} | 0 > .../README => p212/README.libretech-cc} | 0 > board/amlogic/p212/{README => README.p212} | 0 > board/amlogic/p212/p212.c | 16 +- > .../amlogic/{khadas-vim2 => q200}/MAINTAINERS | 6 +- > board/amlogic/{khadas-vim => q200}/Makefile | 2 +- > .../README => q200/README.khadas-vim2} | 0 > board/amlogic/q200/README.q200 | 102 ++ > .../khadas-vim2.c => q200/q200.c} | 14 +- > board/amlogic/s400/MAINTAINERS | 6 + > board/amlogic/{khadas-vim2 => s400}/Makefile | 2 +- > board/amlogic/s400/README | 110 ++ > board/amlogic/s400/s400.c | 21 + > configs/khadas-vim2_defconfig | 1 - > configs/khadas-vim_defconfig | 1 - > configs/libretech-cc_defconfig | 1 - > configs/nanopi-k2_defconfig | 2 - > configs/odroid-c2_defconfig | 1 - > configs/p212_defconfig | 1 - > configs/s400_defconfig | 38 + > drivers/clk/Makefile | 2 +- > drivers/clk/clk_meson.c | 6 +- > drivers/clk/clk_meson_axg.c | 316 ++++ > drivers/pinctrl/meson/Kconfig | 18 +- > drivers/pinctrl/meson/Makefile | 3 + > drivers/pinctrl/meson/pinctrl-meson-axg-pmx.c | 125 ++ > drivers/pinctrl/meson/pinctrl-meson-axg.c | 979 ++++++++++ > drivers/pinctrl/meson/pinctrl-meson-axg.h | 66 + > drivers/pinctrl/meson/pinctrl-meson-gx-pmx.c | 97 + > drivers/pinctrl/meson/pinctrl-meson-gx.h | 48 + > drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 6 +- > drivers/pinctrl/meson/pinctrl-meson-gxl.c | 6 +- > drivers/pinctrl/meson/pinctrl-meson.c | 109 +- > drivers/pinctrl/meson/pinctrl-meson.h | 37 +- > include/configs/khadas-vim.h | 16 - > include/configs/khadas-vim2.h | 18 - > include/configs/libretech-cc.h | 16 - > .../configs/{meson-gx-common.h => meson64.h} | 49 +- > include/configs/nanopi-k2.h | 16 - > include/configs/odroid-c2.h | 16 - > include/configs/p212.h | 18 - > include/dt-bindings/clock/axg-aoclkc.h | 26 + > include/dt-bindings/clock/axg-audio-clkc.h | 94 + > include/dt-bindings/clock/axg-clkc.h | 76 + > include/dt-bindings/gpio/meson-axg-gpio.h | 116 ++ > .../reset/amlogic,meson-axg-audio-arb.h | 17 + > .../reset/amlogic,meson-axg-reset.h | 124 ++ > include/dt-bindings/reset/axg-aoclkc.h | 20 + > 83 files changed, 5166 insertions(+), 754 deletions(-) > create mode 100644 arch/arm/dts/meson-axg-s400.dts > create mode 100644 arch/arm/dts/meson-axg.dtsi > create mode 100644 arch/arm/include/asm/arch-meson/axg.h > create mode 100644 arch/arm/include/asm/arch-meson/boot.h > create mode 100644 arch/arm/include/asm/arch-meson/clock-axg.h > rename arch/arm/include/asm/arch-meson/{clock.h => clock-gx.h} (98%) > create mode 100644 arch/arm/mach-meson/board-axg.c > create mode 100644 arch/arm/mach-meson/board-common.c > rename arch/arm/mach-meson/{board.c => board-gx.c} (59%) > delete mode 100644 arch/arm/mach-meson/eth.c > delete mode 100644 board/amlogic/khadas-vim/Kconfig > delete mode 100644 board/amlogic/khadas-vim/MAINTAINERS > delete mode 100644 board/amlogic/khadas-vim/khadas-vim.c > delete mode 100644 board/amlogic/khadas-vim2/Kconfig > delete mode 100644 board/amlogic/libretech-cc/Kconfig > delete mode 100644 board/amlogic/libretech-cc/MAINTAINERS > delete mode 100644 board/amlogic/libretech-cc/Makefile > delete mode 100644 board/amlogic/libretech-cc/libretech-cc.c > delete mode 100644 board/amlogic/nanopi-k2/Kconfig > delete mode 100644 board/amlogic/nanopi-k2/MAINTAINERS > delete mode 100644 board/amlogic/nanopi-k2/Makefile > delete mode 100644 board/amlogic/nanopi-k2/nanopi-k2.c > delete mode 100644 board/amlogic/odroid-c2/Kconfig > rename board/amlogic/{nanopi-k2/README => odroid-c2/README.nanopi-k2} (100%) > rename board/amlogic/odroid-c2/{README => README.odroid-c2} (100%) > delete mode 100644 board/amlogic/p212/Kconfig > rename board/amlogic/{khadas-vim/README => p212/README.khadas-vim} (100%) > rename board/amlogic/{libretech-cc/README => p212/README.libretech-cc} (100%) > rename board/amlogic/p212/{README => README.p212} (100%) > rename board/amlogic/{khadas-vim2 => q200}/MAINTAINERS (54%) > rename board/amlogic/{khadas-vim => q200}/Makefile (85%) > rename board/amlogic/{khadas-vim2/README => q200/README.khadas-vim2} (100%) > create mode 100644 board/amlogic/q200/README.q200 > rename board/amlogic/{khadas-vim2/khadas-vim2.c => q200/q200.c} (85%) > create mode 100644 board/amlogic/s400/MAINTAINERS > rename board/amlogic/{khadas-vim2 => s400}/Makefile (84%) > create mode 100644 board/amlogic/s400/README > create mode 100644 board/amlogic/s400/s400.c > create mode 100644 configs/s400_defconfig > create mode 100644 drivers/clk/clk_meson_axg.c > create mode 100644 drivers/pinctrl/meson/pinctrl-meson-axg-pmx.c > create mode 100644 drivers/pinctrl/meson/pinctrl-meson-axg.c > create mode 100644 drivers/pinctrl/meson/pinctrl-meson-axg.h > create mode 100644 drivers/pinctrl/meson/pinctrl-meson-gx-pmx.c > create mode 100644 drivers/pinctrl/meson/pinctrl-meson-gx.h > delete mode 100644 include/configs/khadas-vim.h > delete mode 100644 include/configs/khadas-vim2.h > delete mode 100644 include/configs/libretech-cc.h > rename include/configs/{meson-gx-common.h => meson64.h} (51%) > delete mode 100644 include/configs/nanopi-k2.h > delete mode 100644 include/configs/odroid-c2.h > delete mode 100644 include/configs/p212.h > create mode 100644 include/dt-bindings/clock/axg-aoclkc.h > create mode 100644 include/dt-bindings/clock/axg-audio-clkc.h > create mode 100644 include/dt-bindings/clock/axg-clkc.h > create mode 100644 include/dt-bindings/gpio/meson-axg-gpio.h > create mode 100644 include/dt-bindings/reset/amlogic,meson-axg-audio-arb.h > create mode 100644 include/dt-bindings/reset/amlogic,meson-axg-reset.h > create mode 100644 include/dt-bindings/reset/axg-aoclkc.h >
On Mon, Nov 26, 2018 at 09:59:33AM +0100, Neil Armstrong wrote: > Hi Tom, > > On 22/11/2018 10:07, Neil Armstrong wrote: > > This patchset will refactor the Amlogic Meson SoC support in order to > > easily add support for the Amlogic AXg SoC family, and later the G12x SoCs. > > > > In order : > > - Cleanup the mach-meson configs > > - Move board support to reference design common boards > > - Move board Kconfig into mach-meson > > - Add AXG pinctrl & clock support > > - Add AXG device tree and mach-meson support > > - Add support for S400 reference design > > - Do a final factorization of the code > > - Add USB boot support in U-boot > > > > At the end of the patches, the board code is lighter and we maintain > > only the reference designs, where each board will differ in the defconfig. > > > > It will be simpler to add custom board support for future boards with > > more changes against the reference designs. > > > > The complete AXG support depends on the : > > - mmc: meson-gx: Add AXG compatible > > - net: designware: add meson meson axg compatible > > patches submitted to the U-Boot mailing list.Hi > > Would it be simpler if I send you a pull-request with this patchset > and all dependencies ? > > Tell me if you have any comments on the patchset and the 2 > dependencies ! Sure, lets try that. Do you want to get a tree setup on git.denx.de or will you use github/etc? Traditionally we host things on git.denx.de but at least Alex has been doing the EFI and RPi stuff from his github instead, and I'm fine taking a signed tag to pull from either. Thanks!
Hi Tom, On 26/11/2018 13:58, Tom Rini wrote: > On Mon, Nov 26, 2018 at 09:59:33AM +0100, Neil Armstrong wrote: >> Hi Tom, >> >> On 22/11/2018 10:07, Neil Armstrong wrote: >>> This patchset will refactor the Amlogic Meson SoC support in order to >>> easily add support for the Amlogic AXg SoC family, and later the G12x SoCs. >>> >>> In order : >>> - Cleanup the mach-meson configs >>> - Move board support to reference design common boards >>> - Move board Kconfig into mach-meson >>> - Add AXG pinctrl & clock support >>> - Add AXG device tree and mach-meson support >>> - Add support for S400 reference design >>> - Do a final factorization of the code >>> - Add USB boot support in U-boot >>> >>> At the end of the patches, the board code is lighter and we maintain >>> only the reference designs, where each board will differ in the defconfig. >>> >>> It will be simpler to add custom board support for future boards with >>> more changes against the reference designs. >>> >>> The complete AXG support depends on the : >>> - mmc: meson-gx: Add AXG compatible >>> - net: designware: add meson meson axg compatible >>> patches submitted to the U-Boot mailing list.Hi >> >> Would it be simpler if I send you a pull-request with this patchset >> and all dependencies ? >> >> Tell me if you have any comments on the patchset and the 2 >> dependencies ! > > Sure, lets try that. Do you want to get a tree setup on git.denx.de or > will you use github/etc? Traditionally we host things on git.denx.de > but at least Alex has been doing the EFI and RPi stuff from his github > instead, and I'm fine taking a signed tag to pull from either. Thanks! > I'll be happy to have a tree on git.denx.de if it's the best way to go, but until it's done I can do a PR from github if it's ok for you ! Neil
This patchset will refactor the Amlogic Meson SoC support in order to easily add support for the Amlogic AXg SoC family, and later the G12x SoCs. In order : - Cleanup the mach-meson configs - Move board support to reference design common boards - Move board Kconfig into mach-meson - Add AXG pinctrl & clock support - Add AXG device tree and mach-meson support - Add support for S400 reference design - Do a final factorization of the code - Add USB boot support in U-boot At the end of the patches, the board code is lighter and we maintain only the reference designs, where each board will differ in the defconfig. It will be simpler to add custom board support for future boards with more changes against the reference designs. The complete AXG support depends on the : - mmc: meson-gx: Add AXG compatible - net: designware: add meson meson axg compatible patches submitted to the U-Boot mailing list. Changes since v1: - Fixed AXG pinctrl request and AO pin count - Fixed tabs/spaces issues on s400 README Jerome Brunet (12): ARM: meson: clean-up platform selection configs: meson: remove unnecessary MESON_FDTFILE_SETTING board: amlogic: remove p212 derivatives board: amlogic: factorise gxbb boards ARM: rework amlogic configuration configs: meson: change default load addresses pinctrl: meson: rework gx pmx function pinctrl: meson: select generic pinctrl pinctrl: meson: add axg support clk: meson: silence debug print ARM: meson: rework soc arch file to prepare for new SoC ARM: meson: factorize common code out amlogic's boards Neil Armstrong (7): board: amlogic: move khadas-vim2 as q200 ref board clk: meson: add static to meson_gates table ARM: meson: Add support for AXG family ARM: dts: Sync Amlogic Meson AXG DT from Linux 4.20-rc1 clk: Add clock driver for AXG board: amlogic: add support for S400 board ARM: meson: Add boot device discovery arch/arm/dts/Makefile | 3 +- arch/arm/dts/meson-axg-s400.dts | 554 ++++++ arch/arm/dts/meson-axg.dtsi | 1589 +++++++++++++++++ arch/arm/include/asm/arch-meson/axg.h | 52 + arch/arm/include/asm/arch-meson/boot.h | 20 + arch/arm/include/asm/arch-meson/clock-axg.h | 104 ++ .../asm/arch-meson/{clock.h => clock-gx.h} | 4 +- arch/arm/include/asm/arch-meson/eth.h | 6 +- arch/arm/include/asm/arch-meson/gx.h | 1 + arch/arm/include/asm/arch-meson/mem.h | 3 +- arch/arm/mach-meson/Kconfig | 132 +- arch/arm/mach-meson/Makefile | 4 +- arch/arm/mach-meson/board-axg.c | 118 ++ arch/arm/mach-meson/board-common.c | 117 ++ arch/arm/mach-meson/{board.c => board-gx.c} | 106 +- arch/arm/mach-meson/eth.c | 53 - arch/arm/mach-meson/sm.c | 1 - board/amlogic/khadas-vim/Kconfig | 12 - board/amlogic/khadas-vim/MAINTAINERS | 6 - board/amlogic/khadas-vim/khadas-vim.c | 57 - board/amlogic/khadas-vim2/Kconfig | 12 - board/amlogic/libretech-cc/Kconfig | 12 - board/amlogic/libretech-cc/MAINTAINERS | 6 - board/amlogic/libretech-cc/Makefile | 6 - board/amlogic/libretech-cc/libretech-cc.c | 57 - board/amlogic/nanopi-k2/Kconfig | 12 - board/amlogic/nanopi-k2/MAINTAINERS | 6 - board/amlogic/nanopi-k2/Makefile | 7 - board/amlogic/nanopi-k2/nanopi-k2.c | 55 - board/amlogic/odroid-c2/Kconfig | 12 - board/amlogic/odroid-c2/MAINTAINERS | 1 + .../README => odroid-c2/README.nanopi-k2} | 0 .../odroid-c2/{README => README.odroid-c2} | 0 board/amlogic/odroid-c2/odroid-c2.c | 16 +- board/amlogic/p212/Kconfig | 12 - .../README => p212/README.khadas-vim} | 0 .../README => p212/README.libretech-cc} | 0 board/amlogic/p212/{README => README.p212} | 0 board/amlogic/p212/p212.c | 16 +- .../amlogic/{khadas-vim2 => q200}/MAINTAINERS | 6 +- board/amlogic/{khadas-vim => q200}/Makefile | 2 +- .../README => q200/README.khadas-vim2} | 0 board/amlogic/q200/README.q200 | 102 ++ .../khadas-vim2.c => q200/q200.c} | 14 +- board/amlogic/s400/MAINTAINERS | 6 + board/amlogic/{khadas-vim2 => s400}/Makefile | 2 +- board/amlogic/s400/README | 110 ++ board/amlogic/s400/s400.c | 21 + configs/khadas-vim2_defconfig | 1 - configs/khadas-vim_defconfig | 1 - configs/libretech-cc_defconfig | 1 - configs/nanopi-k2_defconfig | 2 - configs/odroid-c2_defconfig | 1 - configs/p212_defconfig | 1 - configs/s400_defconfig | 38 + drivers/clk/Makefile | 2 +- drivers/clk/clk_meson.c | 6 +- drivers/clk/clk_meson_axg.c | 316 ++++ drivers/pinctrl/meson/Kconfig | 18 +- drivers/pinctrl/meson/Makefile | 3 + drivers/pinctrl/meson/pinctrl-meson-axg-pmx.c | 125 ++ drivers/pinctrl/meson/pinctrl-meson-axg.c | 979 ++++++++++ drivers/pinctrl/meson/pinctrl-meson-axg.h | 66 + drivers/pinctrl/meson/pinctrl-meson-gx-pmx.c | 97 + drivers/pinctrl/meson/pinctrl-meson-gx.h | 48 + drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 6 +- drivers/pinctrl/meson/pinctrl-meson-gxl.c | 6 +- drivers/pinctrl/meson/pinctrl-meson.c | 109 +- drivers/pinctrl/meson/pinctrl-meson.h | 37 +- include/configs/khadas-vim.h | 16 - include/configs/khadas-vim2.h | 18 - include/configs/libretech-cc.h | 16 - .../configs/{meson-gx-common.h => meson64.h} | 49 +- include/configs/nanopi-k2.h | 16 - include/configs/odroid-c2.h | 16 - include/configs/p212.h | 18 - include/dt-bindings/clock/axg-aoclkc.h | 26 + include/dt-bindings/clock/axg-audio-clkc.h | 94 + include/dt-bindings/clock/axg-clkc.h | 76 + include/dt-bindings/gpio/meson-axg-gpio.h | 116 ++ .../reset/amlogic,meson-axg-audio-arb.h | 17 + .../reset/amlogic,meson-axg-reset.h | 124 ++ include/dt-bindings/reset/axg-aoclkc.h | 20 + 83 files changed, 5166 insertions(+), 754 deletions(-) create mode 100644 arch/arm/dts/meson-axg-s400.dts create mode 100644 arch/arm/dts/meson-axg.dtsi create mode 100644 arch/arm/include/asm/arch-meson/axg.h create mode 100644 arch/arm/include/asm/arch-meson/boot.h create mode 100644 arch/arm/include/asm/arch-meson/clock-axg.h rename arch/arm/include/asm/arch-meson/{clock.h => clock-gx.h} (98%) create mode 100644 arch/arm/mach-meson/board-axg.c create mode 100644 arch/arm/mach-meson/board-common.c rename arch/arm/mach-meson/{board.c => board-gx.c} (59%) delete mode 100644 arch/arm/mach-meson/eth.c delete mode 100644 board/amlogic/khadas-vim/Kconfig delete mode 100644 board/amlogic/khadas-vim/MAINTAINERS delete mode 100644 board/amlogic/khadas-vim/khadas-vim.c delete mode 100644 board/amlogic/khadas-vim2/Kconfig delete mode 100644 board/amlogic/libretech-cc/Kconfig delete mode 100644 board/amlogic/libretech-cc/MAINTAINERS delete mode 100644 board/amlogic/libretech-cc/Makefile delete mode 100644 board/amlogic/libretech-cc/libretech-cc.c delete mode 100644 board/amlogic/nanopi-k2/Kconfig delete mode 100644 board/amlogic/nanopi-k2/MAINTAINERS delete mode 100644 board/amlogic/nanopi-k2/Makefile delete mode 100644 board/amlogic/nanopi-k2/nanopi-k2.c delete mode 100644 board/amlogic/odroid-c2/Kconfig rename board/amlogic/{nanopi-k2/README => odroid-c2/README.nanopi-k2} (100%) rename board/amlogic/odroid-c2/{README => README.odroid-c2} (100%) delete mode 100644 board/amlogic/p212/Kconfig rename board/amlogic/{khadas-vim/README => p212/README.khadas-vim} (100%) rename board/amlogic/{libretech-cc/README => p212/README.libretech-cc} (100%) rename board/amlogic/p212/{README => README.p212} (100%) rename board/amlogic/{khadas-vim2 => q200}/MAINTAINERS (54%) rename board/amlogic/{khadas-vim => q200}/Makefile (85%) rename board/amlogic/{khadas-vim2/README => q200/README.khadas-vim2} (100%) create mode 100644 board/amlogic/q200/README.q200 rename board/amlogic/{khadas-vim2/khadas-vim2.c => q200/q200.c} (85%) create mode 100644 board/amlogic/s400/MAINTAINERS rename board/amlogic/{khadas-vim2 => s400}/Makefile (84%) create mode 100644 board/amlogic/s400/README create mode 100644 board/amlogic/s400/s400.c create mode 100644 configs/s400_defconfig create mode 100644 drivers/clk/clk_meson_axg.c create mode 100644 drivers/pinctrl/meson/pinctrl-meson-axg-pmx.c create mode 100644 drivers/pinctrl/meson/pinctrl-meson-axg.c create mode 100644 drivers/pinctrl/meson/pinctrl-meson-axg.h create mode 100644 drivers/pinctrl/meson/pinctrl-meson-gx-pmx.c create mode 100644 drivers/pinctrl/meson/pinctrl-meson-gx.h delete mode 100644 include/configs/khadas-vim.h delete mode 100644 include/configs/khadas-vim2.h delete mode 100644 include/configs/libretech-cc.h rename include/configs/{meson-gx-common.h => meson64.h} (51%) delete mode 100644 include/configs/nanopi-k2.h delete mode 100644 include/configs/odroid-c2.h delete mode 100644 include/configs/p212.h create mode 100644 include/dt-bindings/clock/axg-aoclkc.h create mode 100644 include/dt-bindings/clock/axg-audio-clkc.h create mode 100644 include/dt-bindings/clock/axg-clkc.h create mode 100644 include/dt-bindings/gpio/meson-axg-gpio.h create mode 100644 include/dt-bindings/reset/amlogic,meson-axg-audio-arb.h create mode 100644 include/dt-bindings/reset/amlogic,meson-axg-reset.h create mode 100644 include/dt-bindings/reset/axg-aoclkc.h