diff mbox series

[v2,4/6] media: mt9m111: allow to setup pixclk polarity

Message ID 20181029182410.18783-5-m.felsch@pengutronix.de (mailing list archive)
State New, archived
Headers show
Series media: mt9m111 features | expand

Commit Message

Marco Felsch Oct. 29, 2018, 6:24 p.m. UTC
From: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>

The chip can be configured to output data transitions on the
rising or falling edge of PIXCLK (Datasheet R58:1[9]), default is on the
falling edge.

Parsing the fw-node is made in a subfunction to bundle all (future)
dt-parsing / fw-parsing stuff.

Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
(m.grzeschik@pengutronix.de: Fix inverting clock. INV_PIX_CLOCK bit is set
per default. Set bit to 0 (enable mask bit without value) to enable
falling edge sampling.)
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
(m.felsch@pengutronix.de: use fwnode helpers)
(m.felsch@pengutronix.de: mv fw parsing into own function)
(m.felsch@pengutronix.de: adapt commit msg)
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>

---
Changelog:

v2:
- make use of fwnode_*() to drop OF dependency and ifdef's
- mt9m111_g_mbus_config: fix pclk_sample logic which I made due the
  conversion from Enrico's patch.

 drivers/media/i2c/mt9m111.c | 46 ++++++++++++++++++++++++++++++++++++-
 1 file changed, 45 insertions(+), 1 deletion(-)

Comments

Sakari Ailus Nov. 16, 2018, 1:32 p.m. UTC | #1
Hi Marco, Enrico,

On Mon, Oct 29, 2018 at 07:24:08PM +0100, Marco Felsch wrote:
> From: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
> 
> The chip can be configured to output data transitions on the
> rising or falling edge of PIXCLK (Datasheet R58:1[9]), default is on the
> falling edge.
> 
> Parsing the fw-node is made in a subfunction to bundle all (future)
> dt-parsing / fw-parsing stuff.
> 
> Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
> (m.grzeschik@pengutronix.de: Fix inverting clock. INV_PIX_CLOCK bit is set
> per default. Set bit to 0 (enable mask bit without value) to enable
> falling edge sampling.)
> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
> (m.felsch@pengutronix.de: use fwnode helpers)
> (m.felsch@pengutronix.de: mv fw parsing into own function)
> (m.felsch@pengutronix.de: adapt commit msg)
> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
> 
> ---
> Changelog:
> 
> v2:
> - make use of fwnode_*() to drop OF dependency and ifdef's
> - mt9m111_g_mbus_config: fix pclk_sample logic which I made due the
>   conversion from Enrico's patch.
> 
>  drivers/media/i2c/mt9m111.c | 46 ++++++++++++++++++++++++++++++++++++-
>  1 file changed, 45 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/media/i2c/mt9m111.c b/drivers/media/i2c/mt9m111.c
> index e9879e111f58..112eaa5ba917 100644
> --- a/drivers/media/i2c/mt9m111.c
> +++ b/drivers/media/i2c/mt9m111.c
> @@ -15,12 +15,14 @@
>  #include <linux/delay.h>
>  #include <linux/v4l2-mediabus.h>
>  #include <linux/module.h>
> +#include <linux/property.h>
>  
>  #include <media/v4l2-async.h>
>  #include <media/v4l2-clk.h>
>  #include <media/v4l2-common.h>
>  #include <media/v4l2-ctrls.h>
>  #include <media/v4l2-device.h>
> +#include <media/v4l2-fwnode.h>
>  
>  /*
>   * MT9M111, MT9M112 and MT9M131:
> @@ -239,6 +241,8 @@ struct mt9m111 {
>  	const struct mt9m111_datafmt *fmt;
>  	int lastpage;	/* PageMap cache value */
>  	bool is_streaming;
> +	/* user point of view - 0: falling 1: rising edge */
> +	unsigned int pclk_sample:1;

You could use a bool. Up to you.

>  #ifdef CONFIG_MEDIA_CONTROLLER
>  	struct media_pad pad;
>  #endif
> @@ -591,6 +595,10 @@ static int mt9m111_set_pixfmt(struct mt9m111 *mt9m111,
>  		return -EINVAL;
>  	}
>  
> +	/* receiver samples on falling edge, chip-hw default is rising */
> +	if (mt9m111->pclk_sample == 0)
> +		mask_outfmt2 |= MT9M111_OUTFMT_INV_PIX_CLOCK;
> +
>  	ret = mt9m111_reg_mask(client, context_a.output_fmt_ctrl2,
>  			       data_outfmt2, mask_outfmt2);
>  	if (!ret)
> @@ -1051,9 +1059,15 @@ static int mt9m111_s_stream(struct v4l2_subdev *sd, int enable)
>  static int mt9m111_g_mbus_config(struct v4l2_subdev *sd,
>  				struct v4l2_mbus_config *cfg)
>  {
> -	cfg->flags = V4L2_MBUS_MASTER | V4L2_MBUS_PCLK_SAMPLE_RISING |
> +	struct mt9m111 *mt9m111 = container_of(sd, struct mt9m111, subdev);
> +
> +	cfg->flags = V4L2_MBUS_MASTER |
>  		V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_HIGH |
>  		V4L2_MBUS_DATA_ACTIVE_HIGH;
> +
> +	cfg->flags |= mt9m111->pclk_sample ? V4L2_MBUS_PCLK_SAMPLE_RISING :
> +		V4L2_MBUS_PCLK_SAMPLE_FALLING;
> +
>  	cfg->type = V4L2_MBUS_PARALLEL;
>  
>  	return 0;
> @@ -1123,6 +1137,32 @@ static int mt9m111_video_probe(struct i2c_client *client)
>  	return ret;
>  }
>  
> +static int mt9m111_probe_fw(struct i2c_client *client, struct mt9m111 *mt9m111)
> +{
> +	struct v4l2_fwnode_endpoint *bus_cfg;
> +	struct fwnode_handle *np;
> +	int ret = 0;
> +
> +	np = fwnode_graph_get_next_endpoint(dev_fwnode(&client->dev), NULL);
> +	if (!np)
> +		return -EINVAL;
> +
> +	bus_cfg = v4l2_fwnode_endpoint_alloc_parse(np);
> +	if (IS_ERR(bus_cfg)) {
> +		ret = PTR_ERR(bus_cfg);
> +		goto out_put_fw;
> +	}
> +
> +	mt9m111->pclk_sample = !!(bus_cfg->bus.parallel.flags &
> +				  V4L2_MBUS_PCLK_SAMPLE_RISING);
> +
> +	v4l2_fwnode_endpoint_free(bus_cfg);
> +
> +out_put_fw:
> +	fwnode_handle_put(np);
> +	return ret;
> +}
> +
>  static int mt9m111_probe(struct i2c_client *client,
>  			 const struct i2c_device_id *did)
>  {
> @@ -1147,6 +1187,10 @@ static int mt9m111_probe(struct i2c_client *client,
>  	/* Default HIGHPOWER context */
>  	mt9m111->ctx = &context_b;
>  
> +	ret = mt9m111_probe_fw(client, mt9m111);
> +	if (ret)
> +		return ret;

Can you do this before v4l2_clk_get()? That'll go anyway, but for now,
you'd need extra error handling for it.

> +
>  	v4l2_i2c_subdev_init(&mt9m111->subdev, client, &mt9m111_subdev_ops);
>  	mt9m111->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
>  

Please also put this patch after the DT binding changes.
Marco Felsch Nov. 26, 2018, 2:16 p.m. UTC | #2
Hi Sakari,

On 18-11-16 15:32, Sakari Ailus wrote:
> Hi Marco, Enrico,
> 
> On Mon, Oct 29, 2018 at 07:24:08PM +0100, Marco Felsch wrote:
> > From: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
> > 
> > The chip can be configured to output data transitions on the
> > rising or falling edge of PIXCLK (Datasheet R58:1[9]), default is on the
> > falling edge.
> > 
> > Parsing the fw-node is made in a subfunction to bundle all (future)
> > dt-parsing / fw-parsing stuff.
> > 
> > Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
> > (m.grzeschik@pengutronix.de: Fix inverting clock. INV_PIX_CLOCK bit is set
> > per default. Set bit to 0 (enable mask bit without value) to enable
> > falling edge sampling.)
> > Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
> > (m.felsch@pengutronix.de: use fwnode helpers)
> > (m.felsch@pengutronix.de: mv fw parsing into own function)
> > (m.felsch@pengutronix.de: adapt commit msg)
> > Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
> > 
> > ---
> > Changelog:
> > 
> > v2:
> > - make use of fwnode_*() to drop OF dependency and ifdef's
> > - mt9m111_g_mbus_config: fix pclk_sample logic which I made due the
> >   conversion from Enrico's patch.
> > 
> >  drivers/media/i2c/mt9m111.c | 46 ++++++++++++++++++++++++++++++++++++-
> >  1 file changed, 45 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/media/i2c/mt9m111.c b/drivers/media/i2c/mt9m111.c
> > index e9879e111f58..112eaa5ba917 100644
> > --- a/drivers/media/i2c/mt9m111.c
> > +++ b/drivers/media/i2c/mt9m111.c
> > @@ -15,12 +15,14 @@
> >  #include <linux/delay.h>
> >  #include <linux/v4l2-mediabus.h>
> >  #include <linux/module.h>
> > +#include <linux/property.h>
> >  
> >  #include <media/v4l2-async.h>
> >  #include <media/v4l2-clk.h>
> >  #include <media/v4l2-common.h>
> >  #include <media/v4l2-ctrls.h>
> >  #include <media/v4l2-device.h>
> > +#include <media/v4l2-fwnode.h>
> >  
> >  /*
> >   * MT9M111, MT9M112 and MT9M131:
> > @@ -239,6 +241,8 @@ struct mt9m111 {
> >  	const struct mt9m111_datafmt *fmt;
> >  	int lastpage;	/* PageMap cache value */
> >  	bool is_streaming;
> > +	/* user point of view - 0: falling 1: rising edge */
> > +	unsigned int pclk_sample:1;
> 
> You could use a bool. Up to you.

I find it more precise to use a unsigned int, because using a bool is
more like a statement e.g. invert_pclk.

[Snip]

> >  static int mt9m111_probe(struct i2c_client *client,
> >  			 const struct i2c_device_id *did)
> >  {
> > @@ -1147,6 +1187,10 @@ static int mt9m111_probe(struct i2c_client *client,
> >  	/* Default HIGHPOWER context */
> >  	mt9m111->ctx = &context_b;
> >  
> > +	ret = mt9m111_probe_fw(client, mt9m111);
> > +	if (ret)
> > +		return ret;
> 
> Can you do this before v4l2_clk_get()? That'll go anyway, but for now,
> you'd need extra error handling for it.

Sure, I will move it above v4l2_clk_get().

> > +
> >  	v4l2_i2c_subdev_init(&mt9m111->subdev, client, &mt9m111_subdev_ops);
> >  	mt9m111->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> >  
> 
> Please also put this patch after the DT binding changes.

Okay, I will reorder it.

Regards,
Marco

> -- 
> Kind regards,
> 
> Sakari Ailus
> e-mail: sakari.ailus@iki.fi
diff mbox series

Patch

diff --git a/drivers/media/i2c/mt9m111.c b/drivers/media/i2c/mt9m111.c
index e9879e111f58..112eaa5ba917 100644
--- a/drivers/media/i2c/mt9m111.c
+++ b/drivers/media/i2c/mt9m111.c
@@ -15,12 +15,14 @@ 
 #include <linux/delay.h>
 #include <linux/v4l2-mediabus.h>
 #include <linux/module.h>
+#include <linux/property.h>
 
 #include <media/v4l2-async.h>
 #include <media/v4l2-clk.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-ctrls.h>
 #include <media/v4l2-device.h>
+#include <media/v4l2-fwnode.h>
 
 /*
  * MT9M111, MT9M112 and MT9M131:
@@ -239,6 +241,8 @@  struct mt9m111 {
 	const struct mt9m111_datafmt *fmt;
 	int lastpage;	/* PageMap cache value */
 	bool is_streaming;
+	/* user point of view - 0: falling 1: rising edge */
+	unsigned int pclk_sample:1;
 #ifdef CONFIG_MEDIA_CONTROLLER
 	struct media_pad pad;
 #endif
@@ -591,6 +595,10 @@  static int mt9m111_set_pixfmt(struct mt9m111 *mt9m111,
 		return -EINVAL;
 	}
 
+	/* receiver samples on falling edge, chip-hw default is rising */
+	if (mt9m111->pclk_sample == 0)
+		mask_outfmt2 |= MT9M111_OUTFMT_INV_PIX_CLOCK;
+
 	ret = mt9m111_reg_mask(client, context_a.output_fmt_ctrl2,
 			       data_outfmt2, mask_outfmt2);
 	if (!ret)
@@ -1051,9 +1059,15 @@  static int mt9m111_s_stream(struct v4l2_subdev *sd, int enable)
 static int mt9m111_g_mbus_config(struct v4l2_subdev *sd,
 				struct v4l2_mbus_config *cfg)
 {
-	cfg->flags = V4L2_MBUS_MASTER | V4L2_MBUS_PCLK_SAMPLE_RISING |
+	struct mt9m111 *mt9m111 = container_of(sd, struct mt9m111, subdev);
+
+	cfg->flags = V4L2_MBUS_MASTER |
 		V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_HIGH |
 		V4L2_MBUS_DATA_ACTIVE_HIGH;
+
+	cfg->flags |= mt9m111->pclk_sample ? V4L2_MBUS_PCLK_SAMPLE_RISING :
+		V4L2_MBUS_PCLK_SAMPLE_FALLING;
+
 	cfg->type = V4L2_MBUS_PARALLEL;
 
 	return 0;
@@ -1123,6 +1137,32 @@  static int mt9m111_video_probe(struct i2c_client *client)
 	return ret;
 }
 
+static int mt9m111_probe_fw(struct i2c_client *client, struct mt9m111 *mt9m111)
+{
+	struct v4l2_fwnode_endpoint *bus_cfg;
+	struct fwnode_handle *np;
+	int ret = 0;
+
+	np = fwnode_graph_get_next_endpoint(dev_fwnode(&client->dev), NULL);
+	if (!np)
+		return -EINVAL;
+
+	bus_cfg = v4l2_fwnode_endpoint_alloc_parse(np);
+	if (IS_ERR(bus_cfg)) {
+		ret = PTR_ERR(bus_cfg);
+		goto out_put_fw;
+	}
+
+	mt9m111->pclk_sample = !!(bus_cfg->bus.parallel.flags &
+				  V4L2_MBUS_PCLK_SAMPLE_RISING);
+
+	v4l2_fwnode_endpoint_free(bus_cfg);
+
+out_put_fw:
+	fwnode_handle_put(np);
+	return ret;
+}
+
 static int mt9m111_probe(struct i2c_client *client,
 			 const struct i2c_device_id *did)
 {
@@ -1147,6 +1187,10 @@  static int mt9m111_probe(struct i2c_client *client,
 	/* Default HIGHPOWER context */
 	mt9m111->ctx = &context_b;
 
+	ret = mt9m111_probe_fw(client, mt9m111);
+	if (ret)
+		return ret;
+
 	v4l2_i2c_subdev_init(&mt9m111->subdev, client, &mt9m111_subdev_ops);
 	mt9m111->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;