[v3,01/12] clk: mediatek: fixup: Disable tuner_en before change PLL rate

Commit Message

Weiyi Lu Dec. 10, 2018, 7:32 a.m. UTC

From: Owen Chen <[e-mail]>

PLLs with tuner_en bit, such as APLL1, need to disable
tuner_en before apply new frequency settings, or the new frequency
settings (pcw) will not be applied.
The tuner_en bit will be disabled during changing PLL rate
and be restored after new settings applied.
Another minor change is to correct the macro name of pcw change bit
to CON1_PCW_CHG because PCW_CHG(BIT31) is on CON1.

Cc: <[e-mail]>
Signed-off-by: Owen Chen <[e-mail]>
---
 drivers/clk/mediatek/clk-pll.c | 33 +++++++++++++++++++++++++++++++--
 1 file changed, 31 insertions(+), 2 deletions(-)

Comments

Stephen Boyd Dec. 14, 2018, 9:57 p.m. UTC | #1

Why is "fixup" in the subject of this patch?

Quoting Weiyi Lu (2018-12-09 23:32:29)
> From: Owen Chen <[e-mail]>
> 
> PLLs with tuner_en bit, such as APLL1, need to disable
> tuner_en before apply new frequency settings, or the new frequency
> settings (pcw) will not be applied.
> The tuner_en bit will be disabled during changing PLL rate
> and be restored after new settings applied.
> Another minor change is to correct the macro name of pcw change bit
> to CON1_PCW_CHG because PCW_CHG(BIT31) is on CON1.
> 
> Cc: <[e-mail]>
> Signed-off-by: Owen Chen <[e-mail]>

So there should be some Fixes: tag here too so we know what commit is
being fixed?

Weiyi Lu Feb. 1, 2019, 8:21 a.m. UTC | #2

On Fri, 2018-12-14 at 13:57 -0800, Stephen Boyd wrote:
> Why is "fixup" in the subject of this patch?
> 

I'll fix in next version.

> Quoting Weiyi Lu (2018-12-09 23:32:29)
> > From: Owen Chen <[e-mail]>
> > 
> > PLLs with tuner_en bit, such as APLL1, need to disable
> > tuner_en before apply new frequency settings, or the new frequency
> > settings (pcw) will not be applied.
> > The tuner_en bit will be disabled during changing PLL rate
> > and be restored after new settings applied.
> > Another minor change is to correct the macro name of pcw change bit
> > to CON1_PCW_CHG because PCW_CHG(BIT31) is on CON1.
> > 
> > Cc: <[e-mail]>
> > Signed-off-by: Owen Chen <[e-mail]>
> 
> So there should be some Fixes: tag here too so we know what commit is
> being fixed?
> 

I'll add in next version.

> 
> _______________________________________________
> Linux-mediatek mailing list
> [e-mail]
> http://lists.infradead.org/mailman/listinfo/linux-mediatek

Patch

diff --git a/drivers/clk/mediatek/clk-pll.c b/drivers/clk/mediatek/clk-pll.c
index f54e4015b0b1..f0ff5f535c7e 100644
--- a/drivers/clk/mediatek/clk-pll.c
+++ b/drivers/clk/mediatek/clk-pll.c
@@ -27,7 +27,7 @@ 
 #define CON0_BASE_EN		BIT(0)
 #define CON0_PWR_ON		BIT(0)
 #define CON0_ISO_EN		BIT(1)
-#define CON0_PCW_CHG		BIT(31)
+#define CON1_PCW_CHG		BIT(31)
 
 #define AUDPLL_TUNER_EN		BIT(31)
 
@@ -93,9 +93,31 @@  static void mtk_pll_set_rate_regs(struct mtk_clk_pll *pll, u32 pcw,
 {
 	u32 con1, val;
 	int pll_en;
+	u32 tuner_en = 0;
+	u32 tuner_en_mask;
+	void __iomem *tuner_en_addr = NULL;
 
 	pll_en = readl(pll->base_addr + REG_CON0) & CON0_BASE_EN;
 
+	/* disable tuner */
+	if (pll->tuner_en_addr) {
+		tuner_en_addr = pll->tuner_en_addr;
+		tuner_en_mask = BIT(pll->data->tuner_en_bit);
+	} else if (pll->tuner_addr) {
+		tuner_en_addr = pll->tuner_addr;
+		tuner_en_mask = AUDPLL_TUNER_EN;
+	}
+
+	if (tuner_en_addr) {
+		val = readl(tuner_en_addr);
+		tuner_en = val & tuner_en_mask;
+
+		if (tuner_en) {
+			val &= ~tuner_en_mask;
+			writel(val, tuner_en_addr);
+		}
+	}
+
 	/* set postdiv */
 	val = readl(pll->pd_addr);
 	val &= ~(POSTDIV_MASK << pll->data->pd_shift);
@@ -116,12 +138,19 @@  static void mtk_pll_set_rate_regs(struct mtk_clk_pll *pll, u32 pcw,
 	con1 = readl(pll->base_addr + REG_CON1);
 
 	if (pll_en)
-		con1 |= CON0_PCW_CHG;
+		con1 |= CON1_PCW_CHG;
 
 	writel(con1, pll->base_addr + REG_CON1);
 	if (pll->tuner_addr)
 		writel(con1 + 1, pll->tuner_addr);
 
+	/* restore tuner_en */
+	if (tuner_en_addr && tuner_en) {
+		val = readl(tuner_en_addr);
+		val |= tuner_en_mask;
+		writel(val, tuner_en_addr);
+	}
+
 	if (pll_en)
 		udelay(20);
 }