| Message ID | 20190104165335.13205-5-andrew.smirnov@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | PCIE support for i.MX8MQ | expand |
Am Freitag, den 04.01.2019, 08:53 -0800 schrieb Andrey Smirnov: > Add code needed to support i.MX8MQ variant. > > > Cc: Bjorn Helgaas <bhelgaas@google.com> > > Cc: Fabio Estevam <fabio.estevam@nxp.com> > > Cc: Chris Healy <cphealy@gmail.com> > > Cc: Lucas Stach <l.stach@pengutronix.de> > > Cc: Leonard Crestez <leonard.crestez@nxp.com> > > Cc: "A.s. Dong" <aisheng.dong@nxp.com> > > Cc: Richard Zhu <hongxing.zhu@nxp.com> > > Cc: Rob Herring <robh@kernel.org>, > > Cc: devicetree@vger.kernel.org, > Cc: linux-imx@nxp.com > Cc: linux-arm-kernel@lists.infradead.org > Cc: linux-kernel@vger.kernel.org > Cc: linux-pci@vger.kernel.org > Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> > --- > .../bindings/pci/fsl,imx6q-pcie.txt | 3 +- > drivers/pci/controller/dwc/Kconfig | 4 +- > drivers/pci/controller/dwc/pci-imx6.c | 77 ++++++++++++++++++- > 3 files changed, 79 insertions(+), 5 deletions(-) > > diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt > index d514c1f2365f..920ca93870a8 100644 > --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt > +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt > @@ -9,6 +9,7 @@ Required properties: > > - "fsl,imx6sx-pcie", > > - "fsl,imx6qp-pcie" > > - "fsl,imx7d-pcie" > > + - "fsl,imx8mq-pcie" > - reg: base address and length of the PCIe controller > - interrupts: A list of interrupt outputs of the controller. Must contain an > entry for each entry in the interrupt-names property. > @@ -45,7 +46,7 @@ Additional required properties for imx6sx-pcie: > PCIE_PHY power domains > - power-domain-names: Must be "pcie", "pcie_phy" > > -Additional required properties for imx7d-pcie: > +Additional required properties for imx7d-pcie and imx8mq-pcie: > - power-domains: Must be set to a phandle pointing to PCIE_PHY power domain > - resets: Must contain phandles to PCIe-related reset lines exposed by SRC > IP block > diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig > index 6aafec3fad00..83ea318ad989 100644 > --- a/drivers/pci/controller/dwc/Kconfig > +++ b/drivers/pci/controller/dwc/Kconfig > @@ -89,8 +89,8 @@ config PCI_EXYNOS > > select PCIE_DW_HOST > > config PCI_IMX6 > > - bool "Freescale i.MX6/7 PCIe controller" > > - depends on SOC_IMX6Q || SOC_IMX7D || (ARM && COMPILE_TEST) > > + bool "Freescale i.MX6/7/8 PCIe controller" > > + depends on SOC_IMX6Q || SOC_IMX7D || (ARM64 && ARCH_MXC) || ((ARM || ARM64) && COMPILE_TEST) > > depends on PCI_MSI_IRQ_DOMAIN > > select PCIE_DW_HOST > > diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c > index 75ee0cd7af3b..dd9d8732f6ba 100644 > --- a/drivers/pci/controller/dwc/pci-imx6.c > +++ b/drivers/pci/controller/dwc/pci-imx6.c > @@ -8,6 +8,7 @@ > > * Author: Sean Cross <xobs@kosagi.com> > */ > > +#include <linux/bitfield.h> > #include <linux/clk.h> > #include <linux/delay.h> > #include <linux/gpio.h> > @@ -32,6 +33,12 @@ > > #include "pcie-designware.h" > > > +#define IMX8MQ_GPR_PCIE_REF_USE_PAD BIT(9) > > +#define IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN BIT(10) > > +#define IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE BIT(11) > > +#define IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE GENMASK(11, 8) > > +#define IMX8MQ_PCIE2_BASE_ADDR 0x33c00000 > + > > #define to_imx6_pcie(x) dev_get_drvdata((x)->dev) > > enum imx6_pcie_variants { > @@ -39,6 +46,7 @@ enum imx6_pcie_variants { > > IMX6SX, > > IMX6QP, > > IMX7D, > > + IMX8MQ, > }; > > > #define IMX6_PCIE_FLAG_IMX6_PHY BIT(0) > @@ -58,6 +66,7 @@ struct imx6_pcie { > > > struct clk *pcie_inbound_axi; > > > struct clk *pcie; > > > struct regmap *iomuxc_gpr; > > > + u32 controller_id; > > > struct reset_control *pciephy_reset; > > > struct reset_control *apps_reset; > > > struct reset_control *turnoff_reset; > @@ -276,6 +285,7 @@ static void imx6_pcie_reset_phy(struct imx6_pcie *imx6_pcie) > > pcie_phy_write(imx6_pcie, PHY_RX_OVRD_IN_LO, tmp); > } > > +#ifdef CONFIG_ARM > /* Added for PCI abort handling */ > static int imx6q_pcie_abort_handler(unsigned long addr, > > unsigned int fsr, struct pt_regs *regs) > @@ -309,6 +319,7 @@ static int imx6q_pcie_abort_handler(unsigned long addr, > > > return 1; > } > +#endif > > static int imx6_pcie_attach_pd(struct device *dev) > { > @@ -353,6 +364,7 @@ static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie) > > > switch (imx6_pcie->drvdata->variant) { > > case IMX7D: > > + case IMX8MQ: > > reset_control_assert(imx6_pcie->pciephy_reset); > > reset_control_assert(imx6_pcie->apps_reset); > > break; > @@ -387,10 +399,17 @@ static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie) > > } > } > > +static unsigned int imx6_pcie_grp_offset(const struct imx6_pcie *imx6_pcie) > +{ > > + WARN_ON(imx6_pcie->drvdata->variant != IMX8MQ); > > + return imx6_pcie->controller_id == 1 ? IOMUXC_GPR16 : IOMUXC_GPR14; > +} > + > static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie) > { > > struct dw_pcie *pci = imx6_pcie->pci; > > struct device *dev = pci->dev; > > + unsigned int offset; > > int ret = 0; > > > switch (imx6_pcie->drvdata->variant) { > @@ -421,6 +440,19 @@ static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie) > > break; > > case IMX7D: > > break; > > + case IMX8MQ: > > + offset = imx6_pcie_grp_offset(imx6_pcie); > > + /* > > + * Set the over ride low and enabled > > + * make sure that REF_CLK is turned on. > > + */ > > + regmap_update_bits(imx6_pcie->iomuxc_gpr, offset, > > + IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE, > > + 0); > > + regmap_update_bits(imx6_pcie->iomuxc_gpr, offset, > > + IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN, > > + IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN); > > + break; > > } > > > return ret; > @@ -497,6 +529,9 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie) > > } > > > switch (imx6_pcie->drvdata->variant) { > > + case IMX8MQ: > > + reset_control_deassert(imx6_pcie->pciephy_reset); > > + break; > > case IMX7D: > > reset_control_deassert(imx6_pcie->pciephy_reset); > > imx7d_pcie_wait_for_phy_pll_lock(imx6_pcie); > @@ -532,9 +567,37 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie) > > } > } > > +static void imx6_pcie_configure_type(struct imx6_pcie *imx6_pcie) > +{ > > + unsigned int mask, val; > + > > + if (imx6_pcie->drvdata->variant == IMX8MQ && > > + imx6_pcie->controller_id == 1) { > > + mask = IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE; > > + val = FIELD_PREP(IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE, > > + PCI_EXP_TYPE_ROOT_PORT); > > + } else { > > + mask = IMX6Q_GPR12_DEVICE_TYPE; > > + val = FIELD_PREP(IMX6Q_GPR12_DEVICE_TYPE, > > + PCI_EXP_TYPE_ROOT_PORT); > > + } > + > > + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, mask, val); > +} > + > static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie) > { > > switch (imx6_pcie->drvdata->variant) { > > + case IMX8MQ: > > + /* > > + * TODO: Currently this code assumes external > > + * oscillator is being used > > + */ > > + regmap_update_bits(imx6_pcie->iomuxc_gpr, > > + imx6_pcie_grp_offset(imx6_pcie), > > + IMX8MQ_GPR_PCIE_REF_USE_PAD, > > + IMX8MQ_GPR_PCIE_REF_USE_PAD); > > + break; > > case IMX7D: > > regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, > > IMX7D_GPR12_PCIE_PHY_REFCLK_SEL, 0); > @@ -570,8 +633,7 @@ static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie) > > break; > > } > > > - regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, > > - IMX6Q_GPR12_DEVICE_TYPE, PCI_EXP_TYPE_ROOT_PORT << 12); > > + imx6_pcie_configure_type(imx6_pcie); > } > > static int imx6_setup_phy_mpll(struct imx6_pcie *imx6_pcie) > @@ -668,6 +730,7 @@ static void imx6_pcie_ltssm_enable(struct device *dev) > > IMX6Q_GPR12_PCIE_CTL_2); > > break; > > case IMX7D: > > + case IMX8MQ: > > reset_control_deassert(imx6_pcie->apps_reset); > > break; > > } > @@ -1008,6 +1071,10 @@ static int imx6_pcie_probe(struct platform_device *pdev) > > } > > break; > > case IMX7D: > > + case IMX8MQ: > > + if (dbi_base->start == IMX8MQ_PCIE2_BASE_ADDR) > > + imx6_pcie->controller_id = 1; > + > > imx6_pcie->pciephy_reset = devm_reset_control_get_exclusive(dev, > > "pciephy"); > > if (IS_ERR(imx6_pcie->pciephy_reset)) { > @@ -1115,6 +1182,9 @@ static const struct imx6_pcie_drvdata drvdata[] = { > > [IMX7D] = { > > .variant = IMX7D, > > }, > > + [IMX8MQ] = { > > + .variant = IMX8MQ, > > + }, > }; > > static const struct of_device_id imx6_pcie_of_match[] = { > @@ -1122,6 +1192,7 @@ static const struct of_device_id imx6_pcie_of_match[] = { > > { .compatible = "fsl,imx6sx-pcie", .data = &drvdata[IMX6SX], }, > > { .compatible = "fsl,imx6qp-pcie", .data = &drvdata[IMX6QP], }, > > { .compatible = "fsl,imx7d-pcie", .data = &drvdata[IMX7D], }, > > + { .compatible = "fsl,imx8mq-pcie", .data = &drvdata[IMX8MQ], } , > > {}, > }; > > @@ -1138,6 +1209,7 @@ static struct platform_driver imx6_pcie_driver = { > > static int __init imx6_pcie_init(void) > { > +#ifdef CONFIG_ARM > > /* > > * Since probe() can be deferred we need to make sure that > > * hook_fault_code is not called after __init memory is freed > @@ -1147,6 +1219,7 @@ static int __init imx6_pcie_init(void) > > */ > > hook_fault_code(8, imx6q_pcie_abort_handler, SIGBUS, 0, > > "external abort on non-linefetch"); > +#endif > > > return platform_driver_register(&imx6_pcie_driver); > }
On Fri, Jan 04, 2019 at 08:53:35AM -0800, Andrey Smirnov wrote: > Add code needed to support i.MX8MQ variant. > > Cc: Bjorn Helgaas <bhelgaas@google.com> > Cc: Fabio Estevam <fabio.estevam@nxp.com> > Cc: Chris Healy <cphealy@gmail.com> > Cc: Lucas Stach <l.stach@pengutronix.de> > Cc: Leonard Crestez <leonard.crestez@nxp.com> > Cc: "A.s. Dong" <aisheng.dong@nxp.com> > Cc: Richard Zhu <hongxing.zhu@nxp.com> > Cc: Rob Herring <robh@kernel.org>, > Cc: devicetree@vger.kernel.org, > Cc: linux-imx@nxp.com > Cc: linux-arm-kernel@lists.infradead.org > Cc: linux-kernel@vger.kernel.org > Cc: linux-pci@vger.kernel.org > Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> > --- > .../bindings/pci/fsl,imx6q-pcie.txt | 3 +- > drivers/pci/controller/dwc/Kconfig | 4 +- > drivers/pci/controller/dwc/pci-imx6.c | 77 ++++++++++++++++++- > 3 files changed, 79 insertions(+), 5 deletions(-) > > diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt > index d514c1f2365f..920ca93870a8 100644 > --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt > +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt > @@ -9,6 +9,7 @@ Required properties: > - "fsl,imx6sx-pcie", > - "fsl,imx6qp-pcie" > - "fsl,imx7d-pcie" > + - "fsl,imx8mq-pcie" > - reg: base address and length of the PCIe controller > - interrupts: A list of interrupt outputs of the controller. Must contain an > entry for each entry in the interrupt-names property. > @@ -45,7 +46,7 @@ Additional required properties for imx6sx-pcie: > PCIE_PHY power domains > - power-domain-names: Must be "pcie", "pcie_phy" > > -Additional required properties for imx7d-pcie: > +Additional required properties for imx7d-pcie and imx8mq-pcie: > - power-domains: Must be set to a phandle pointing to PCIE_PHY power domain > - resets: Must contain phandles to PCIe-related reset lines exposed by SRC > IP block > diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig > index 6aafec3fad00..83ea318ad989 100644 > --- a/drivers/pci/controller/dwc/Kconfig > +++ b/drivers/pci/controller/dwc/Kconfig > @@ -89,8 +89,8 @@ config PCI_EXYNOS > select PCIE_DW_HOST > > config PCI_IMX6 > - bool "Freescale i.MX6/7 PCIe controller" > - depends on SOC_IMX6Q || SOC_IMX7D || (ARM && COMPILE_TEST) > + bool "Freescale i.MX6/7/8 PCIe controller" > + depends on SOC_IMX6Q || SOC_IMX7D || (ARM64 && ARCH_MXC) || ((ARM || ARM64) && COMPILE_TEST) Since you added the ifdef around the abort handler, I think you can drop "(ARM || ARM64)" and enable building other arches. Rob
On Fri, Jan 11, 2019 at 11:53 AM Rob Herring <robh@kernel.org> wrote: > > On Fri, Jan 04, 2019 at 08:53:35AM -0800, Andrey Smirnov wrote: > > Add code needed to support i.MX8MQ variant. > > > > Cc: Bjorn Helgaas <bhelgaas@google.com> > > Cc: Fabio Estevam <fabio.estevam@nxp.com> > > Cc: Chris Healy <cphealy@gmail.com> > > Cc: Lucas Stach <l.stach@pengutronix.de> > > Cc: Leonard Crestez <leonard.crestez@nxp.com> > > Cc: "A.s. Dong" <aisheng.dong@nxp.com> > > Cc: Richard Zhu <hongxing.zhu@nxp.com> > > Cc: Rob Herring <robh@kernel.org>, > > Cc: devicetree@vger.kernel.org, > > Cc: linux-imx@nxp.com > > Cc: linux-arm-kernel@lists.infradead.org > > Cc: linux-kernel@vger.kernel.org > > Cc: linux-pci@vger.kernel.org > > Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> > > --- > > .../bindings/pci/fsl,imx6q-pcie.txt | 3 +- > > drivers/pci/controller/dwc/Kconfig | 4 +- > > drivers/pci/controller/dwc/pci-imx6.c | 77 ++++++++++++++++++- > > 3 files changed, 79 insertions(+), 5 deletions(-) > > > > diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt > > index d514c1f2365f..920ca93870a8 100644 > > --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt > > +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt > > @@ -9,6 +9,7 @@ Required properties: > > - "fsl,imx6sx-pcie", > > - "fsl,imx6qp-pcie" > > - "fsl,imx7d-pcie" > > + - "fsl,imx8mq-pcie" > > - reg: base address and length of the PCIe controller > > - interrupts: A list of interrupt outputs of the controller. Must contain an > > entry for each entry in the interrupt-names property. > > @@ -45,7 +46,7 @@ Additional required properties for imx6sx-pcie: > > PCIE_PHY power domains > > - power-domain-names: Must be "pcie", "pcie_phy" > > > > -Additional required properties for imx7d-pcie: > > +Additional required properties for imx7d-pcie and imx8mq-pcie: > > - power-domains: Must be set to a phandle pointing to PCIE_PHY power domain > > - resets: Must contain phandles to PCIe-related reset lines exposed by SRC > > IP block > > diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig > > index 6aafec3fad00..83ea318ad989 100644 > > --- a/drivers/pci/controller/dwc/Kconfig > > +++ b/drivers/pci/controller/dwc/Kconfig > > @@ -89,8 +89,8 @@ config PCI_EXYNOS > > select PCIE_DW_HOST > > > > config PCI_IMX6 > > - bool "Freescale i.MX6/7 PCIe controller" > > - depends on SOC_IMX6Q || SOC_IMX7D || (ARM && COMPILE_TEST) > > + bool "Freescale i.MX6/7/8 PCIe controller" > > + depends on SOC_IMX6Q || SOC_IMX7D || (ARM64 && ARCH_MXC) || ((ARM || ARM64) && COMPILE_TEST) > > Since you added the ifdef around the abort handler, I think you can drop > "(ARM || ARM64)" and enable building other arches. > OK, makes sense. I'll give it a go in v5. Thanks, Andrey Smirnov
diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt index d514c1f2365f..920ca93870a8 100644 --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt @@ -9,6 +9,7 @@ Required properties: - "fsl,imx6sx-pcie", - "fsl,imx6qp-pcie" - "fsl,imx7d-pcie" + - "fsl,imx8mq-pcie" - reg: base address and length of the PCIe controller - interrupts: A list of interrupt outputs of the controller. Must contain an entry for each entry in the interrupt-names property. @@ -45,7 +46,7 @@ Additional required properties for imx6sx-pcie: PCIE_PHY power domains - power-domain-names: Must be "pcie", "pcie_phy" -Additional required properties for imx7d-pcie: +Additional required properties for imx7d-pcie and imx8mq-pcie: - power-domains: Must be set to a phandle pointing to PCIE_PHY power domain - resets: Must contain phandles to PCIe-related reset lines exposed by SRC IP block diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig index 6aafec3fad00..83ea318ad989 100644 --- a/drivers/pci/controller/dwc/Kconfig +++ b/drivers/pci/controller/dwc/Kconfig @@ -89,8 +89,8 @@ config PCI_EXYNOS select PCIE_DW_HOST config PCI_IMX6 - bool "Freescale i.MX6/7 PCIe controller" - depends on SOC_IMX6Q || SOC_IMX7D || (ARM && COMPILE_TEST) + bool "Freescale i.MX6/7/8 PCIe controller" + depends on SOC_IMX6Q || SOC_IMX7D || (ARM64 && ARCH_MXC) || ((ARM || ARM64) && COMPILE_TEST) depends on PCI_MSI_IRQ_DOMAIN select PCIE_DW_HOST diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c index 75ee0cd7af3b..dd9d8732f6ba 100644 --- a/drivers/pci/controller/dwc/pci-imx6.c +++ b/drivers/pci/controller/dwc/pci-imx6.c @@ -8,6 +8,7 @@ * Author: Sean Cross <xobs@kosagi.com> */ +#include <linux/bitfield.h> #include <linux/clk.h> #include <linux/delay.h> #include <linux/gpio.h> @@ -32,6 +33,12 @@ #include "pcie-designware.h" +#define IMX8MQ_GPR_PCIE_REF_USE_PAD BIT(9) +#define IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN BIT(10) +#define IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE BIT(11) +#define IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE GENMASK(11, 8) +#define IMX8MQ_PCIE2_BASE_ADDR 0x33c00000 + #define to_imx6_pcie(x) dev_get_drvdata((x)->dev) enum imx6_pcie_variants { @@ -39,6 +46,7 @@ enum imx6_pcie_variants { IMX6SX, IMX6QP, IMX7D, + IMX8MQ, }; #define IMX6_PCIE_FLAG_IMX6_PHY BIT(0) @@ -58,6 +66,7 @@ struct imx6_pcie { struct clk *pcie_inbound_axi; struct clk *pcie; struct regmap *iomuxc_gpr; + u32 controller_id; struct reset_control *pciephy_reset; struct reset_control *apps_reset; struct reset_control *turnoff_reset; @@ -276,6 +285,7 @@ static void imx6_pcie_reset_phy(struct imx6_pcie *imx6_pcie) pcie_phy_write(imx6_pcie, PHY_RX_OVRD_IN_LO, tmp); } +#ifdef CONFIG_ARM /* Added for PCI abort handling */ static int imx6q_pcie_abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *regs) @@ -309,6 +319,7 @@ static int imx6q_pcie_abort_handler(unsigned long addr, return 1; } +#endif static int imx6_pcie_attach_pd(struct device *dev) { @@ -353,6 +364,7 @@ static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie) switch (imx6_pcie->drvdata->variant) { case IMX7D: + case IMX8MQ: reset_control_assert(imx6_pcie->pciephy_reset); reset_control_assert(imx6_pcie->apps_reset); break; @@ -387,10 +399,17 @@ static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie) } } +static unsigned int imx6_pcie_grp_offset(const struct imx6_pcie *imx6_pcie) +{ + WARN_ON(imx6_pcie->drvdata->variant != IMX8MQ); + return imx6_pcie->controller_id == 1 ? IOMUXC_GPR16 : IOMUXC_GPR14; +} + static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie) { struct dw_pcie *pci = imx6_pcie->pci; struct device *dev = pci->dev; + unsigned int offset; int ret = 0; switch (imx6_pcie->drvdata->variant) { @@ -421,6 +440,19 @@ static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie) break; case IMX7D: break; + case IMX8MQ: + offset = imx6_pcie_grp_offset(imx6_pcie); + /* + * Set the over ride low and enabled + * make sure that REF_CLK is turned on. + */ + regmap_update_bits(imx6_pcie->iomuxc_gpr, offset, + IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE, + 0); + regmap_update_bits(imx6_pcie->iomuxc_gpr, offset, + IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN, + IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN); + break; } return ret; @@ -497,6 +529,9 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie) } switch (imx6_pcie->drvdata->variant) { + case IMX8MQ: + reset_control_deassert(imx6_pcie->pciephy_reset); + break; case IMX7D: reset_control_deassert(imx6_pcie->pciephy_reset); imx7d_pcie_wait_for_phy_pll_lock(imx6_pcie); @@ -532,9 +567,37 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie) } } +static void imx6_pcie_configure_type(struct imx6_pcie *imx6_pcie) +{ + unsigned int mask, val; + + if (imx6_pcie->drvdata->variant == IMX8MQ && + imx6_pcie->controller_id == 1) { + mask = IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE; + val = FIELD_PREP(IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE, + PCI_EXP_TYPE_ROOT_PORT); + } else { + mask = IMX6Q_GPR12_DEVICE_TYPE; + val = FIELD_PREP(IMX6Q_GPR12_DEVICE_TYPE, + PCI_EXP_TYPE_ROOT_PORT); + } + + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, mask, val); +} + static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie) { switch (imx6_pcie->drvdata->variant) { + case IMX8MQ: + /* + * TODO: Currently this code assumes external + * oscillator is being used + */ + regmap_update_bits(imx6_pcie->iomuxc_gpr, + imx6_pcie_grp_offset(imx6_pcie), + IMX8MQ_GPR_PCIE_REF_USE_PAD, + IMX8MQ_GPR_PCIE_REF_USE_PAD); + break; case IMX7D: regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, IMX7D_GPR12_PCIE_PHY_REFCLK_SEL, 0); @@ -570,8 +633,7 @@ static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie) break; } - regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, - IMX6Q_GPR12_DEVICE_TYPE, PCI_EXP_TYPE_ROOT_PORT << 12); + imx6_pcie_configure_type(imx6_pcie); } static int imx6_setup_phy_mpll(struct imx6_pcie *imx6_pcie) @@ -668,6 +730,7 @@ static void imx6_pcie_ltssm_enable(struct device *dev) IMX6Q_GPR12_PCIE_CTL_2); break; case IMX7D: + case IMX8MQ: reset_control_deassert(imx6_pcie->apps_reset); break; } @@ -1008,6 +1071,10 @@ static int imx6_pcie_probe(struct platform_device *pdev) } break; case IMX7D: + case IMX8MQ: + if (dbi_base->start == IMX8MQ_PCIE2_BASE_ADDR) + imx6_pcie->controller_id = 1; + imx6_pcie->pciephy_reset = devm_reset_control_get_exclusive(dev, "pciephy"); if (IS_ERR(imx6_pcie->pciephy_reset)) { @@ -1115,6 +1182,9 @@ static const struct imx6_pcie_drvdata drvdata[] = { [IMX7D] = { .variant = IMX7D, }, + [IMX8MQ] = { + .variant = IMX8MQ, + }, }; static const struct of_device_id imx6_pcie_of_match[] = { @@ -1122,6 +1192,7 @@ static const struct of_device_id imx6_pcie_of_match[] = { { .compatible = "fsl,imx6sx-pcie", .data = &drvdata[IMX6SX], }, { .compatible = "fsl,imx6qp-pcie", .data = &drvdata[IMX6QP], }, { .compatible = "fsl,imx7d-pcie", .data = &drvdata[IMX7D], }, + { .compatible = "fsl,imx8mq-pcie", .data = &drvdata[IMX8MQ], } , {}, }; @@ -1138,6 +1209,7 @@ static struct platform_driver imx6_pcie_driver = { static int __init imx6_pcie_init(void) { +#ifdef CONFIG_ARM /* * Since probe() can be deferred we need to make sure that * hook_fault_code is not called after __init memory is freed @@ -1147,6 +1219,7 @@ static int __init imx6_pcie_init(void) */ hook_fault_code(8, imx6q_pcie_abort_handler, SIGBUS, 0, "external abort on non-linefetch"); +#endif return platform_driver_register(&imx6_pcie_driver); }
Add code needed to support i.MX8MQ variant. Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Leonard Crestez <leonard.crestez@nxp.com> Cc: "A.s. Dong" <aisheng.dong@nxp.com> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: Rob Herring <robh@kernel.org>, Cc: devicetree@vger.kernel.org, Cc: linux-imx@nxp.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> --- .../bindings/pci/fsl,imx6q-pcie.txt | 3 +- drivers/pci/controller/dwc/Kconfig | 4 +- drivers/pci/controller/dwc/pci-imx6.c | 77 ++++++++++++++++++- 3 files changed, 79 insertions(+), 5 deletions(-)