diff mbox series

[2/2] arm64: dts: fsl: imx8mq-evk: enable USB nodes for USB3 host

Message ID 20190115110325.13236-2-l.stach@pengutronix.de (mailing list archive)
State New, archived
Headers show
Series [1/2] arm64: dts: fsl: imx8mq: add USB nodes | expand

Commit Message

Lucas Stach Jan. 15, 2019, 11:03 a.m. UTC 
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
 arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 9 +++++++++
 1 file changed, 9 insertions(+)

Comments

Shawn Guo Jan. 16, 2019, 10:18 a.m. UTC | #1 
On Tue, Jan 15, 2019 at 12:03:25PM +0100, Lucas Stach wrote:
> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> ---
>  arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
> index 64acccc4bfcb..ab6d609abce6 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
> @@ -137,6 +137,15 @@
>  	status = "okay";
>  };
>  
> +&usb3_phy1 {
> +	status = "okay";
> +};
> +
> +&usb_dwc3_1 {
> +	status = "okay";
> +	dr_mode = "host";

Please flip them.  We usually put 'status' at end of property list.

Shawn

> +};
> +
>  &usdhc1 {
>  	pinctrl-names = "default", "state_100mhz", "state_200mhz";
>  	pinctrl-0 = <&pinctrl_usdhc1>;
> -- 
> 2.20.1
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
index 64acccc4bfcb..ab6d609abce6 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
@@ -137,6 +137,15 @@ 
 	status = "okay";
 };
 
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
 &usdhc1 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc1>;