| Message ID | 20190125032314.20915-1-wens@csie.org (mailing list archive) |
|---|---|
| Headers | show |
| Series | ARM: sun8i: a23: Enable display pipeline | expand |
On Fri, Jan 25, 2019 at 11:23:03AM +0800, Chen-Yu Tsai wrote: > Hi everyone, > > This series enables the display pipeline on the Allwinner A23 SoC. > A few fixes are included for corner cases when the frontend isn't > enabled. > > The A23 display pipeline is very much the same as the A33, except > that the A23 does not have the SAT IP block embedded within the > display backend. > > MIPI DSI is not covered as I do not have a device that uses it. > > Patch 1 fixes the pll-mipi clock on the A23. > > Patch 2 adds compatible strings for the various hardware blocks > of the A23 display pipeline. > > Patch 3 through 5 fix some issues in our DRM plane support, namely > declaring support for formats when we shouldn't. > > Patch 6 adds support for the A23 display pipeline to the driver. > > Patch 7 is a small cleanup before moving the display pipeline device > nodes. > > Patch 8 moves the display nodes from the A33-specific dtsi file to > the A23-A33 shared dtsi file. Note that the MIPI DSI device nodes are > not moved. > > Patch 9 adds compatible strings to the display nodes in the A23-specific > dtsi file. > > Patch 10 enables the display pipeline for the shared A23/A33 Q8 tablet > dtsi file. The compatible string should be filled in by the tablet dts > files. > > Patch 11 fills in the compatible string for the standard A23 Q8 tablet. > Note the compatible string is not for the specific model used in the > tablet, as it varies between production runs. Rather it is just one that > works. > > Please have a look. Patch 3 might be worth applying as a fix, but might > not be worth the trouble. It could just as easily be applied for -next > and then backported. > > Also, the fixes tags are no longer line wrapped, unlike patches I've > sent in the past. Applied all, thanks! Maxime
Hi everyone, This series enables the display pipeline on the Allwinner A23 SoC. A few fixes are included for corner cases when the frontend isn't enabled. The A23 display pipeline is very much the same as the A33, except that the A23 does not have the SAT IP block embedded within the display backend. MIPI DSI is not covered as I do not have a device that uses it. Patch 1 fixes the pll-mipi clock on the A23. Patch 2 adds compatible strings for the various hardware blocks of the A23 display pipeline. Patch 3 through 5 fix some issues in our DRM plane support, namely declaring support for formats when we shouldn't. Patch 6 adds support for the A23 display pipeline to the driver. Patch 7 is a small cleanup before moving the display pipeline device nodes. Patch 8 moves the display nodes from the A33-specific dtsi file to the A23-A33 shared dtsi file. Note that the MIPI DSI device nodes are not moved. Patch 9 adds compatible strings to the display nodes in the A23-specific dtsi file. Patch 10 enables the display pipeline for the shared A23/A33 Q8 tablet dtsi file. The compatible string should be filled in by the tablet dts files. Patch 11 fills in the compatible string for the standard A23 Q8 tablet. Note the compatible string is not for the specific model used in the tablet, as it varies between production runs. Rather it is just one that works. Please have a look. Patch 3 might be worth applying as a fix, but might not be worth the trouble. It could just as easily be applied for -next and then backported. Also, the fixes tags are no longer line wrapped, unlike patches I've sent in the past. Regards ChenYu Chen-Yu Tsai (11): clk: sunxi-ng: sun8i-a23: Enable PLL-MIPI LDOs when ungating it dt-bindings: display: sun4i-drm: Add compatible strings for A23 display drm/sun4i: backend: Remove BGRX8888 from list of supported formats drm/sun4i: layer: Assign backend pointer before calling DRM helpers drm/sun4i: layer: support just backend formats when frontend is unavailable drm/sun4i: Add support for A23 display pipeline ARM: dts: sun8i-a23-a33: Move NAND controller device node to sort by address ARM: dts: sun8i-a33: Move display pipeline nodes to a23/a33 common dtsi ARM: dts: sun8i-a23: Add compatible strings to display pipeline device nodes ARM: dts: sun8i-q8-common: Enable display pipeline with RGB LCD panel ARM: dts: sun8i-a23-q8: Set compatible string for LCD panel .../bindings/display/sunxi/sun4i-drm.txt | 5 + arch/arm/boot/dts/sun8i-a23-a33.dtsi | 175 ++++++++++++++-- arch/arm/boot/dts/sun8i-a23-q8-tablet.dts | 4 + arch/arm/boot/dts/sun8i-a23.dtsi | 20 ++ arch/arm/boot/dts/sun8i-a33.dtsi | 194 ++++-------------- arch/arm/boot/dts/sun8i-q8-common.dtsi | 37 ++++ drivers/clk/sunxi-ng/ccu-sun8i-a23.c | 2 +- drivers/gpu/drm/sun4i/sun4i_backend.c | 5 +- drivers/gpu/drm/sun4i/sun4i_drv.c | 2 + drivers/gpu/drm/sun4i/sun4i_frontend.c | 4 + drivers/gpu/drm/sun4i/sun4i_layer.c | 37 +++- drivers/gpu/drm/sun4i/sun4i_tcon.c | 1 + drivers/gpu/drm/sun4i/sun6i_drc.c | 1 + 13 files changed, 310 insertions(+), 177 deletions(-)