| Message ID | 20190110151020.30468-1-peda@axentia.se (mailing list archive) |
|---|---|
| Headers | show |
| Series | drm/atmel-hlcdc: fix plane clipping/rotation issues | expand |
On Thu, 10 Jan 2019 15:10:28 +0000 Peter Rosin <peda@axentia.se> wrote: > Hi! > > I found an unfortunate issue while recoding plane handling to use > drm_atomic_helper_check_plane_state(). The driver rotates clockwise, > which is not correct. I simply fixed it (patch 1/4), but maybe that > will cause regressions for unsuspecting users who simply assumed > that the clockwise rotation was correct? I don't know what to do > about that? Adding an option to get the old broken behavior seems > useless, wouldn't it be just as easy to just fix whatever app to > rotate the other way instead of adding an option somewhere? Hm, rotation support has been added before the standard rotation property was created, and at that time I assumed rotation was clockwise (which apparently was an unwise choice). Anyway, I don't have a solution for this problem, so I'll let Nicolas decide if it's acceptable to change the rotation behavior. > > I have only tested this series on sama5d3, but I did check the docs > for various other chips (sama5d2, sama5d4, sam9n12, sam9g15, sam9g35 > and sam9x35) supported by the driver (relevant to patch 4/4). Thanks for addressing those problems. > > Cheers, > Peter > > Peter Rosin (4): > drm/atmel-hlcdc: rotate planes counterclockwise > drm/atmel-hlcdc: do not swap w/h of the crtc when a plane is rotated > drm/atmel-hlcdc: fix clipping of planes > drm/atmel-hlcdc: do not immediately disable planes, wait for next > frame > > drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c | 179 +++++++++--------------- > 1 file changed, 67 insertions(+), 112 deletions(-) >
Hi Peter. (Hijacking this thread as I lost the orginal mails) > > > > I found an unfortunate issue while recoding plane handling to use > > drm_atomic_helper_check_plane_state(). The driver rotates clockwise, > > which is not correct. I simply fixed it (patch 1/4), but maybe that > > will cause regressions for unsuspecting users who simply assumed > > that the clockwise rotation was correct? I don't know what to do > > about that? Adding an option to get the old broken behavior seems > > useless, wouldn't it be just as easy to just fix whatever app to > > rotate the other way instead of adding an option somewhere? > > Hm, rotation support has been added before the standard rotation > property was created, and at that time I assumed rotation was clockwise > (which apparently was an unwise choice). Anyway, I don't have a > solution for this problem, so I'll let Nicolas decide if it's > acceptable to change the rotation behavior. > > > > > I have only tested this series on sama5d3, but I did check the docs > > for various other chips (sama5d2, sama5d4, sam9n12, sam9g15, sam9g35 > > and sam9x35) supported by the driver (relevant to patch 4/4). I wonder if, when this code path is anyway touched, could benefit from drm_rect_rotate(). It is obviously not a simple replacement, but could it be used then I hope the resulting code is simpler. Sam
On 2019-01-10 18:45, Boris Brezillon wrote: > On Thu, 10 Jan 2019 15:10:28 +0000 > Peter Rosin <peda@axentia.se> wrote: > >> Hi! >> >> I found an unfortunate issue while recoding plane handling to use >> drm_atomic_helper_check_plane_state(). The driver rotates clockwise, >> which is not correct. I simply fixed it (patch 1/4), but maybe that >> will cause regressions for unsuspecting users who simply assumed >> that the clockwise rotation was correct? I don't know what to do >> about that? Adding an option to get the old broken behavior seems >> useless, wouldn't it be just as easy to just fix whatever app to >> rotate the other way instead of adding an option somewhere? > > Hm, rotation support has been added before the standard rotation > property was created, and at that time I assumed rotation was clockwise > (which apparently was an unwise choice). Anyway, I don't have a > solution for this problem, so I'll let Nicolas decide if it's > acceptable to change the rotation behavior. Speaking of unwise, fbcon rotation is clockwise and drm rotation is counterclockwise. 'nuff said. Cheers, Peter
On 2019-01-10 21:16, Sam Ravnborg wrote: > Hi Peter. > > (Hijacking this thread as I lost the orginal mails) Assuming you wanted to reply to this patch? https://patchwork.kernel.org/patch/10753571/ >>> I found an unfortunate issue while recoding plane handling to use >>> drm_atomic_helper_check_plane_state(). The driver rotates clockwise, >>> which is not correct. I simply fixed it (patch 1/4), but maybe that >>> will cause regressions for unsuspecting users who simply assumed >>> that the clockwise rotation was correct? I don't know what to do >>> about that? Adding an option to get the old broken behavior seems >>> useless, wouldn't it be just as easy to just fix whatever app to >>> rotate the other way instead of adding an option somewhere? >> >> Hm, rotation support has been added before the standard rotation >> property was created, and at that time I assumed rotation was clockwise >> (which apparently was an unwise choice). Anyway, I don't have a >> solution for this problem, so I'll let Nicolas decide if it's >> acceptable to change the rotation behavior. >> >>> I have only tested this series on sama5d3, but I did check the docs >>> for various other chips (sama5d2, sama5d4, sam9n12, sam9g15, sam9g35 >>> and sam9x35) supported by the driver (relevant to patch 4/4). > > I wonder if, when this code path is anyway touched, could benefit > from drm_rect_rotate(). > > It is obviously not a simple replacement, but could it be used then > I hope the resulting code is simpler. What are you referring to that goes beyond what is done in patch 3/4 in this series? After setting up the strides, the only use of src_[xywh] are to calculate the scaling factors, and for that the position is irrelevant. I.e. src_x and src_y are not used. Sure, in some theoretical sense it might be good if src_[xy] are also transformed into the rotated coordinate system along with src_[wh], but it seems a bit backwards to switch over to struct drm_rect when the interesting properties are the width and height, not the coordinates of the corners. No strong feelings on the issue though... Cheers, Peter
On 10/01/2019 at 18:45, Boris Brezillon wrote: > On Thu, 10 Jan 2019 15:10:28 +0000 > Peter Rosin <peda@axentia.se> wrote: > >> Hi! >> >> I found an unfortunate issue while recoding plane handling to use >> drm_atomic_helper_check_plane_state(). The driver rotates clockwise, >> which is not correct. I simply fixed it (patch 1/4), but maybe that >> will cause regressions for unsuspecting users who simply assumed >> that the clockwise rotation was correct? I don't know what to do >> about that? Adding an option to get the old broken behavior seems >> useless, wouldn't it be just as easy to just fix whatever app to >> rotate the other way instead of adding an option somewhere? > > Hm, rotation support has been added before the standard rotation > property was created, and at that time I assumed rotation was clockwise > (which apparently was an unwise choice). Anyway, I don't have a > solution for this problem, so I'll let Nicolas decide if it's > acceptable to change the rotation behavior. Yes, being consistent with standard DRM sub-system is far more important in my opinion. Best regards, Nicolas >> I have only tested this series on sama5d3, but I did check the docs >> for various other chips (sama5d2, sama5d4, sam9n12, sam9g15, sam9g35 >> and sam9x35) supported by the driver (relevant to patch 4/4). > > Thanks for addressing those problems. > >> >> Cheers, >> Peter >> >> Peter Rosin (4): >> drm/atmel-hlcdc: rotate planes counterclockwise >> drm/atmel-hlcdc: do not swap w/h of the crtc when a plane is rotated >> drm/atmel-hlcdc: fix clipping of planes >> drm/atmel-hlcdc: do not immediately disable planes, wait for next >> frame >> >> drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c | 179 +++++++++--------------- >> 1 file changed, 67 insertions(+), 112 deletions(-) >> > >
On Thu, 10 Jan 2019 15:10:28 +0000 Peter Rosin <peda@axentia.se> wrote: > Hi! > > I found an unfortunate issue while recoding plane handling to use > drm_atomic_helper_check_plane_state(). The driver rotates clockwise, > which is not correct. I simply fixed it (patch 1/4), but maybe that > will cause regressions for unsuspecting users who simply assumed > that the clockwise rotation was correct? I don't know what to do > about that? Adding an option to get the old broken behavior seems > useless, wouldn't it be just as easy to just fix whatever app to > rotate the other way instead of adding an option somewhere? > > I have only tested this series on sama5d3, but I did check the docs > for various other chips (sama5d2, sama5d4, sam9n12, sam9g15, sam9g35 > and sam9x35) supported by the driver (relevant to patch 4/4). > > Cheers, > Peter > > Peter Rosin (4): > drm/atmel-hlcdc: rotate planes counterclockwise > drm/atmel-hlcdc: do not swap w/h of the crtc when a plane is rotated > drm/atmel-hlcdc: fix clipping of planes Queued patches 1-3 to drm-misc-next. > drm/atmel-hlcdc: do not immediately disable planes, wait for next > frame Still waiting for Nicolas feedback on this one. Thanks, Boris
On 2019-01-27 09:27, Boris Brezillon wrote: > On Thu, 10 Jan 2019 15:10:28 +0000 > Peter Rosin <peda@axentia.se> wrote: > >> Hi! >> >> I found an unfortunate issue while recoding plane handling to use >> drm_atomic_helper_check_plane_state(). The driver rotates clockwise, >> which is not correct. I simply fixed it (patch 1/4), but maybe that >> will cause regressions for unsuspecting users who simply assumed >> that the clockwise rotation was correct? I don't know what to do >> about that? Adding an option to get the old broken behavior seems >> useless, wouldn't it be just as easy to just fix whatever app to >> rotate the other way instead of adding an option somewhere? >> >> I have only tested this series on sama5d3, but I did check the docs >> for various other chips (sama5d2, sama5d4, sam9n12, sam9g15, sam9g35 >> and sam9x35) supported by the driver (relevant to patch 4/4). >> >> Cheers, >> Peter >> >> Peter Rosin (4): >> drm/atmel-hlcdc: rotate planes counterclockwise >> drm/atmel-hlcdc: do not swap w/h of the crtc when a plane is rotated >> drm/atmel-hlcdc: fix clipping of planes > > Queued patches 1-3 to drm-misc-next. Great, thanks. >> drm/atmel-hlcdc: do not immediately disable planes, wait for next >> frame > > Still waiting for Nicolas feedback on this one. [Adding back Nicolas, he seems to have gone missing from the list recipients.] I have done some testing of that patch and for me it's a definite improvement. The test I did was removing a white plane from a white background. Without the patch, the driver will output black where the plane was for the current frame (since the driver does that disc-area thing for the largest hidden part of the background). With the patch, I get no visual glitches when removing a plane. I use a plane to scroll a text, and if you know what to look for, the black rectangle that flickers by as the plane with the scrolling text is removed is little bit disturbing. Not a significant problem, and maybe only geeks notice it, but still... Just wanted to say that the resulting "black hole" mentioned in the other thread really does exist and that the patch may make sense beyond the fact that it removes usage of undocumented features. I have not seen any bad side effects fro the patch, but admittedly my testing was very limited and I did not try to remove the plane while doing other stuff with the driver. So, there might still be reasons for removing planes immediately... Cheers, Peter
On Thu, 31 Jan 2019 13:13:22 +0000 Peter Rosin <peda@axentia.se> wrote: > On 2019-01-27 09:27, Boris Brezillon wrote: > > On Thu, 10 Jan 2019 15:10:28 +0000 > > Peter Rosin <peda@axentia.se> wrote: > > > >> Hi! > >> > >> I found an unfortunate issue while recoding plane handling to use > >> drm_atomic_helper_check_plane_state(). The driver rotates clockwise, > >> which is not correct. I simply fixed it (patch 1/4), but maybe that > >> will cause regressions for unsuspecting users who simply assumed > >> that the clockwise rotation was correct? I don't know what to do > >> about that? Adding an option to get the old broken behavior seems > >> useless, wouldn't it be just as easy to just fix whatever app to > >> rotate the other way instead of adding an option somewhere? > >> > >> I have only tested this series on sama5d3, but I did check the docs > >> for various other chips (sama5d2, sama5d4, sam9n12, sam9g15, sam9g35 > >> and sam9x35) supported by the driver (relevant to patch 4/4). > >> > >> Cheers, > >> Peter > >> > >> Peter Rosin (4): > >> drm/atmel-hlcdc: rotate planes counterclockwise > >> drm/atmel-hlcdc: do not swap w/h of the crtc when a plane is rotated > >> drm/atmel-hlcdc: fix clipping of planes > > > > Queued patches 1-3 to drm-misc-next. > > Great, thanks. > > >> drm/atmel-hlcdc: do not immediately disable planes, wait for next > >> frame > > > > Still waiting for Nicolas feedback on this one. > > [Adding back Nicolas, he seems to have gone missing from the list > recipients.] > > I have done some testing of that patch and for me it's a definite > improvement. The test I did was removing a white plane from a white > background. Without the patch, the driver will output black where > the plane was for the current frame (since the driver does that > disc-area thing for the largest hidden part of the background). > With the patch, I get no visual glitches when removing a plane. > > I use a plane to scroll a text, and if you know what to look for, > the black rectangle that flickers by as the plane with the scrolling > text is removed is little bit disturbing. Not a significant problem, > and maybe only geeks notice it, but still... > > Just wanted to say that the resulting "black hole" mentioned in the > other thread really does exist and that the patch may make sense > beyond the fact that it removes usage of undocumented features. > > I have not seen any bad side effects fro the patch, but admittedly > my testing was very limited and I did not try to remove the plane > while doing other stuff with the driver. So, there might still be > reasons for removing planes immediately... Since everything is now synchronized on vsync events thanks to the atomic modeset infra (including plane/crtc disable requests), I think the problem I was trying to fix at the time no longer exists (might re-appear if we start supporting async plane disable requests which is anyway not supported by the core). So I think I'll just apply your patch. Thanks, Boris
Hi! I found an unfortunate issue while recoding plane handling to use drm_atomic_helper_check_plane_state(). The driver rotates clockwise, which is not correct. I simply fixed it (patch 1/4), but maybe that will cause regressions for unsuspecting users who simply assumed that the clockwise rotation was correct? I don't know what to do about that? Adding an option to get the old broken behavior seems useless, wouldn't it be just as easy to just fix whatever app to rotate the other way instead of adding an option somewhere? I have only tested this series on sama5d3, but I did check the docs for various other chips (sama5d2, sama5d4, sam9n12, sam9g15, sam9g35 and sam9x35) supported by the driver (relevant to patch 4/4). Cheers, Peter Peter Rosin (4): drm/atmel-hlcdc: rotate planes counterclockwise drm/atmel-hlcdc: do not swap w/h of the crtc when a plane is rotated drm/atmel-hlcdc: fix clipping of planes drm/atmel-hlcdc: do not immediately disable planes, wait for next frame drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c | 179 +++++++++--------------- 1 file changed, 67 insertions(+), 112 deletions(-)