| Message ID | 20190131022749.19046-1-josephl@nvidia.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | cpuidle: dt: bail out if the idle-state DT node is not compatible | expand |
On Thu, Jan 31, 2019 at 10:27:49AM +0800, Joseph Lo wrote: > Currently, the DT of the idle states will be parsed first whether it's > compatible or not. This could cause a warning message that comes from if > the CPU doesn't support identical idle states. E.g. Tegra186 can run > with 2 Cortex-A57 and 2 Denver cores with different idle states on > different types of these cores. > > We fix it to check the compatible string before the parsing procedures. > So it can make sure it only goes through the idle states that the CPU > supported. > > Signed-off-by: Joseph Lo <josephl@nvidia.com> > --- > drivers/cpuidle/dt_idle_states.c | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/drivers/cpuidle/dt_idle_states.c b/drivers/cpuidle/dt_idle_states.c > index 53342b7f1010..4a528908abb3 100644 > --- a/drivers/cpuidle/dt_idle_states.c > +++ b/drivers/cpuidle/dt_idle_states.c > @@ -180,6 +180,11 @@ int dt_init_idle_driver(struct cpuidle_driver *drv, > if (!state_node) > break; > > + if (!of_device_is_compatible(state_node, matches->compatible)) { > + err = -EINVAL; > + break; > + } > + Does it make sense to use of_match_node to get the matching device id and just pass that to init_state_node instead of the complete array to find the match. -- Regards, Sudeep
On 1/31/19 6:38 PM, Sudeep Holla wrote: > On Thu, Jan 31, 2019 at 10:27:49AM +0800, Joseph Lo wrote: >> Currently, the DT of the idle states will be parsed first whether it's >> compatible or not. This could cause a warning message that comes from if >> the CPU doesn't support identical idle states. E.g. Tegra186 can run >> with 2 Cortex-A57 and 2 Denver cores with different idle states on >> different types of these cores. >> >> We fix it to check the compatible string before the parsing procedures. >> So it can make sure it only goes through the idle states that the CPU >> supported. >> >> Signed-off-by: Joseph Lo <josephl@nvidia.com> >> --- >> drivers/cpuidle/dt_idle_states.c | 5 +++++ >> 1 file changed, 5 insertions(+) >> >> diff --git a/drivers/cpuidle/dt_idle_states.c b/drivers/cpuidle/dt_idle_states.c >> index 53342b7f1010..4a528908abb3 100644 >> --- a/drivers/cpuidle/dt_idle_states.c >> +++ b/drivers/cpuidle/dt_idle_states.c >> @@ -180,6 +180,11 @@ int dt_init_idle_driver(struct cpuidle_driver *drv, >> if (!state_node) >> break; >> >> + if (!of_device_is_compatible(state_node, matches->compatible)) { >> + err = -EINVAL; >> + break; >> + } >> + > > Does it make sense to use of_match_node to get the matching device id and > just pass that to init_state_node instead of the complete array to find the > match. Yes, that would be even better. Thanks, Joseph
diff --git a/drivers/cpuidle/dt_idle_states.c b/drivers/cpuidle/dt_idle_states.c index 53342b7f1010..4a528908abb3 100644 --- a/drivers/cpuidle/dt_idle_states.c +++ b/drivers/cpuidle/dt_idle_states.c @@ -180,6 +180,11 @@ int dt_init_idle_driver(struct cpuidle_driver *drv, if (!state_node) break; + if (!of_device_is_compatible(state_node, matches->compatible)) { + err = -EINVAL; + break; + } + if (!of_device_is_available(state_node)) { of_node_put(state_node); continue;
Currently, the DT of the idle states will be parsed first whether it's compatible or not. This could cause a warning message that comes from if the CPU doesn't support identical idle states. E.g. Tegra186 can run with 2 Cortex-A57 and 2 Denver cores with different idle states on different types of these cores. We fix it to check the compatible string before the parsing procedures. So it can make sure it only goes through the idle states that the CPU supported. Signed-off-by: Joseph Lo <josephl@nvidia.com> --- drivers/cpuidle/dt_idle_states.c | 5 +++++ 1 file changed, 5 insertions(+)