| Message ID | 20190206013329.18195-4-masneyb@onstation.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ARM: qcom: add vibrator support for various MSM SOCs | expand |
On Tue, Feb 05, 2019 at 08:33:29PM -0500, Brian Masney wrote: > This patch adds device device tree bindings for the vibrator found on > the LG Nexus 5 (hammerhead) phone. > > Signed-off-by: Brian Masney <masneyb@onstation.org> This should go through Qualcomm tree with the other bindings? > --- > Changes since v3: > - None > > .../qcom-msm8974-lge-nexus5-hammerhead.dts | 31 +++++++++++++++++++ > 1 file changed, 31 insertions(+) > > diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts > index b3b04736a159..1fd9f429f34a 100644 > --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts > +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts > @@ -5,6 +5,7 @@ > #include <dt-bindings/gpio/gpio.h> > #include <dt-bindings/input/input.h> > #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> > +#include <dt-bindings/clock/qcom,mmcc-msm8974.h> > > / { > model = "LGE MSM 8974 HAMMERHEAD"; > @@ -306,6 +307,36 @@ > input-enable; > }; > }; > + > + vibrator_pin: vibrator { > + pwm { > + pins = "gpio27"; > + function = "gp1_clk"; > + > + drive-strength = <6>; > + bias-disable; > + }; > + > + enable { > + pins = "gpio60"; > + function = "gpio"; > + }; > + }; > + }; > + > + vibrator@fd8c3450 { > + compatible = "qcom,msm8974-vibrator"; > + reg = <0xfd8c3450 0x400>; > + > + vcc-supply = <&pm8941_l19>; > + > + clocks = <&mmcc CAMSS_GP1_CLK>; > + clock-names = "pwm"; > + > + enable-gpios = <&msmgpio 60 GPIO_ACTIVE_HIGH>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&vibrator_pin>; > }; > > sdhci@f9824900 { > -- > 2.17.2 >
On Wed, Feb 06, 2019 at 10:18:22AM -0800, Dmitry Torokhov wrote: > On Tue, Feb 05, 2019 at 08:33:29PM -0500, Brian Masney wrote: > > This patch adds device device tree bindings for the vibrator found on > > the LG Nexus 5 (hammerhead) phone. > > > > Signed-off-by: Brian Masney <masneyb@onstation.org> > > This should go through Qualcomm tree with the other bindings? Yes, this will go through Andy's tree. Brian
diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts index b3b04736a159..1fd9f429f34a 100644 --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -5,6 +5,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/clock/qcom,mmcc-msm8974.h> / { model = "LGE MSM 8974 HAMMERHEAD"; @@ -306,6 +307,36 @@ input-enable; }; }; + + vibrator_pin: vibrator { + pwm { + pins = "gpio27"; + function = "gp1_clk"; + + drive-strength = <6>; + bias-disable; + }; + + enable { + pins = "gpio60"; + function = "gpio"; + }; + }; + }; + + vibrator@fd8c3450 { + compatible = "qcom,msm8974-vibrator"; + reg = <0xfd8c3450 0x400>; + + vcc-supply = <&pm8941_l19>; + + clocks = <&mmcc CAMSS_GP1_CLK>; + clock-names = "pwm"; + + enable-gpios = <&msmgpio 60 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&vibrator_pin>; }; sdhci@f9824900 {
This patch adds device device tree bindings for the vibrator found on the LG Nexus 5 (hammerhead) phone. Signed-off-by: Brian Masney <masneyb@onstation.org> --- Changes since v3: - None .../qcom-msm8974-lge-nexus5-hammerhead.dts | 31 +++++++++++++++++++ 1 file changed, 31 insertions(+)