| Message ID | 1550004500-24485-3-git-send-email-liam.merwick@oracle.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v3,1/3] tpm_tis: fix loop that cancels any seizure by a lower locality | expand |
On 2/12/19 3:48 PM, Liam Merwick wrote: > cppcheck reports: > > [hw/tpm/tpm_tis.c:113]: (warning) %d in format string (no. 2) requires 'int' but the argument type is 'unsigned int' > > Rather than just converting the format specifier to use '%u", the > tpm_tis_show_buffer() function is converted to use trace points and > the two debug callers use the trace event infrastructure so that it's > available in production cases also and not just when DEBUG_TIS is enabled. > > Signed-off-by: Liam Merwick <liam.merwick@oracle.com> > --- > > Sample trace output > > % echo tpm_tis_show_buffer > /tmp/events > % export QTEST_QEMU_BINARY="/home/Development/qemu-upstream/x86_64-softmmu/qemu-system-x86_64 --trace events=/tmp/events" > % tests/tpm-tis-test > /D=/home/Development/qemu-upstream/hw/tpm/tpm-tis/test_check_localities: OK > /D=/home/Development/qemu-upstream/hw/tpm/tpm-tis/test_check_access_reg: OK > /D=/home/Development/qemu-upstream/hw/tpm/tpm-tis/test_check_access_reg_seize: OK > /D=/home/Development/qemu-upstream/hw/tpm/tpm-tis/test_check_access_reg_release: OK > /D=/home/Development/qemu-upstream/hw/tpm/tpm-tis/test_check_transmit: OK > % ./scripts/simpletrace.py trace-events-all trace-30665 > tpm_tis_show_buffer 0.000 pid=30665 string=tpm_tis: To TPM len=0xc line=80 01 00 00 00 0C 00 00 01 44 00 00 > tpm_tis_show_buffer 256.581 pid=30665 string=tpm_tis: From TPM len=0xa line=80 01 00 00 00 0A 00 00 01 01 should now be 'length=10' and then a new line with just the bytes? > > hw/tpm/tpm_tis.c | 25 +++++++++++++++++-------- > hw/tpm/trace-events | 1 + > 2 files changed, 18 insertions(+), 8 deletions(-) > > diff --git a/hw/tpm/tpm_tis.c b/hw/tpm/tpm_tis.c > index 772431f20874..18e19d5f900d 100644 > --- a/hw/tpm/tpm_tis.c > +++ b/hw/tpm/tpm_tis.c > @@ -108,17 +108,26 @@ static uint8_t tpm_tis_locality_from_addr(hwaddr addr) > static void tpm_tis_show_buffer(const unsigned char *buffer, > size_t buffer_size, const char *string) > { > - uint32_t len, i; > + size_t len, i; > + char *line_buffer, *p; > > len = MIN(tpm_cmd_get_size(buffer), buffer_size); > - printf("tpm_tis: %s length = %d\n", string, len); > - for (i = 0; i < len; i++) { > + > + /* > + * allocate enough room for 3 chars per buffer entry plus > + * a newline after every 16 chars. This is missing the terminating null byte. > + */ > + line_buffer = g_malloc(len * 3 + (len / 16)); > + > + for (i = 0, p = line_buffer; i < len; i++) { > if (i && !(i % 16)) { > - printf("\n"); > + p += sprintf(p, "\n"); > } > - printf("%.2X ", buffer[i]); > + p += sprintf(p, "%.2X ", buffer[i]); > } > - printf("\n"); > + trace_tpm_tis_show_buffer(string, len, line_buffer); > + > + g_free(line_buffer); > } > > /* > @@ -145,7 +154,7 @@ static void tpm_tis_sts_set(TPMLocality *l, uint32_t flags) > */ > static void tpm_tis_tpm_send(TPMState *s, uint8_t locty) > { > - if (DEBUG_TIS) { > + if (trace_event_get_state_backends(TRACE_TPM_TIS_SHOW_BUFFER)) { > tpm_tis_show_buffer(s->buffer, s->be_buffer_size, > "tpm_tis: To TPM"); > } > @@ -315,7 +324,7 @@ static void tpm_tis_request_completed(TPMIf *ti, int ret) > s->loc[locty].state = TPM_TIS_STATE_COMPLETION; > s->rw_offset = 0; > > - if (DEBUG_TIS) { > + if (trace_event_get_state_backends(TRACE_TPM_TIS_SHOW_BUFFER)) { > tpm_tis_show_buffer(s->buffer, s->be_buffer_size, > "tpm_tis: From TPM"); > } > diff --git a/hw/tpm/trace-events b/hw/tpm/trace-events > index 920d32ad5514..c0267d075027 100644 > --- a/hw/tpm/trace-events > +++ b/hw/tpm/trace-events > @@ -36,6 +36,7 @@ tpm_emulator_pre_save(void) "" > tpm_emulator_inst_init(void) "" > > # hw/tpm/tpm_tis.c > +tpm_tis_show_buffer(const char *string, size_t len, const char *line) "tpm_tis: %s length = %zu\n%s" > tpm_tis_raise_irq(uint32_t irqmask) "Raising IRQ for flag 0x%08x" > tpm_tis_new_active_locality(uint8_t locty) "Active locality is now %d" > tpm_tis_abort(uint8_t locty) "New active locality is %d"
On 12/02/2019 21:01, Stefan Berger wrote: > On 2/12/19 3:48 PM, Liam Merwick wrote: >> cppcheck reports: >> >> [hw/tpm/tpm_tis.c:113]: (warning) %d in format string (no. 2) requires >> 'int' but the argument type is 'unsigned int' >> >> Rather than just converting the format specifier to use '%u", the >> tpm_tis_show_buffer() function is converted to use trace points and >> the two debug callers use the trace event infrastructure so that it's >> available in production cases also and not just when DEBUG_TIS is >> enabled. >> >> Signed-off-by: Liam Merwick <liam.merwick@oracle.com> >> --- >> >> Sample trace output >> >> % echo tpm_tis_show_buffer > /tmp/events >> % export >> QTEST_QEMU_BINARY="/home/Development/qemu-upstream/x86_64-softmmu/qemu-system-x86_64 >> --trace events=/tmp/events" >> % tests/tpm-tis-test >> /D=/home/Development/qemu-upstream/hw/tpm/tpm-tis/test_check_localities: >> OK >> /D=/home/Development/qemu-upstream/hw/tpm/tpm-tis/test_check_access_reg: >> OK >> /D=/home/Development/qemu-upstream/hw/tpm/tpm-tis/test_check_access_reg_seize: >> OK >> /D=/home/Development/qemu-upstream/hw/tpm/tpm-tis/test_check_access_reg_release: >> OK >> /D=/home/Development/qemu-upstream/hw/tpm/tpm-tis/test_check_transmit: OK >> % ./scripts/simpletrace.py trace-events-all trace-30665 >> tpm_tis_show_buffer 0.000 pid=30665 string=tpm_tis: To TPM len=0xc >> line=80 01 00 00 00 0C 00 00 01 44 00 00 >> tpm_tis_show_buffer 256.581 pid=30665 string=tpm_tis: From TPM len=0xa >> line=80 01 00 00 00 0A 00 00 01 01 > > > should now be 'length=10' and then a new line with just the bytes? > The example I gave was using --enable-trace-backends=simple (which AFAICT doesn't use the format string, just the name/type of the parameters) tpm_tis_show_buffer 0.000 pid=8416 direction=To TPM len=0xc line=80 01 00 00 00 0C 00 00 01 44 00 00 tpm_tis_show_buffer 303.909 pid=8416 direction=From TPM len=0xa line=80 01 00 00 00 0A 00 00 01 01 Below is the output with --enable-trace-backends=log which does include the newline 1255@1550051983.333949:tpm_tis_show_buffer direction: To TPM len: 12 buf: 80 01 00 00 00 0C 00 00 01 44 00 00 1255@1550051983.334213:tpm_tis_show_buffer direction: From TPM len: 10 buf: 80 01 00 00 00 0A 00 00 01 01 (those include a few tweaks for v4 I made based on investigating this question: dropped "tpm_tis: " since the function name is now printed by the tracing framework, renamed some of the parameters to trace_tpm_tis_show_buffer() and adjusted the format string) diff --git a/hw/tpm/tpm_tis.c b/hw/tpm/tpm_tis.c index 18e19d5f900d..d7b9bee85741 100644 --- a/hw/tpm/tpm_tis.c +++ b/hw/tpm/tpm_tis.c @@ -155,8 +155,7 @@ static void tpm_tis_sts_set(TPMLocality *l, uint32_t flags) static void tpm_tis_tpm_send(TPMState *s, uint8_t locty) { if (trace_event_get_state_backends(TRACE_TPM_TIS_SHOW_BUFFER)) { - tpm_tis_show_buffer(s->buffer, s->be_buffer_size, - "tpm_tis: To TPM"); + tpm_tis_show_buffer(s->buffer, s->be_buffer_size, "To TPM"); } /* @@ -325,8 +324,7 @@ static void tpm_tis_request_completed(TPMIf *ti, int ret) s->rw_offset = 0; if (trace_event_get_state_backends(TRACE_TPM_TIS_SHOW_BUFFER)) { - tpm_tis_show_buffer(s->buffer, s->be_buffer_size, - "tpm_tis: From TPM"); + tpm_tis_show_buffer(s->buffer, s->be_buffer_size, "From TPM"); } if (TPM_TIS_IS_VALID_LOCTY(s->next_locty)) { diff --git a/hw/tpm/trace-events b/hw/tpm/trace-events index c0267d075027..f45dcd220993 100644 --- a/hw/tpm/trace-events +++ b/hw/tpm/trace-events @@ -36,7 +36,7 @@ tpm_emulator_pre_save(void) "" tpm_emulator_inst_init(void) "" # hw/tpm/tpm_tis.c -tpm_tis_show_buffer(const char *string, size_t len, const char *line) "tpm_tis: %s length = %zu\n%s" +tpm_tis_show_buffer(const char *direction, size_t len, const char *buf) "direction: %s len: %zu\nbuf: %s > >> >> hw/tpm/tpm_tis.c | 25 +++++++++++++++++-------- >> hw/tpm/trace-events | 1 + >> 2 files changed, 18 insertions(+), 8 deletions(-) >> >> diff --git a/hw/tpm/tpm_tis.c b/hw/tpm/tpm_tis.c >> index 772431f20874..18e19d5f900d 100644 >> --- a/hw/tpm/tpm_tis.c >> +++ b/hw/tpm/tpm_tis.c >> @@ -108,17 +108,26 @@ static uint8_t tpm_tis_locality_from_addr(hwaddr >> addr) >> static void tpm_tis_show_buffer(const unsigned char *buffer, >> size_t buffer_size, const char *string) >> { >> - uint32_t len, i; >> + size_t len, i; >> + char *line_buffer, *p; >> len = MIN(tpm_cmd_get_size(buffer), buffer_size); >> - printf("tpm_tis: %s length = %d\n", string, len); >> - for (i = 0; i < len; i++) { >> + >> + /* >> + * allocate enough room for 3 chars per buffer entry plus >> + * a newline after every 16 chars. > > > This is missing the terminating null byte. > will fix in v4 Regards, Liam > >> + */ >> + line_buffer = g_malloc(len * 3 + (len / 16)); >> + >> + for (i = 0, p = line_buffer; i < len; i++) { >> if (i && !(i % 16)) { >> - printf("\n"); >> + p += sprintf(p, "\n"); >> } >> - printf("%.2X ", buffer[i]); >> + p += sprintf(p, "%.2X ", buffer[i]); >> } >> - printf("\n"); >> + trace_tpm_tis_show_buffer(string, len, line_buffer); >> + >> + g_free(line_buffer); >> } >> /* >> @@ -145,7 +154,7 @@ static void tpm_tis_sts_set(TPMLocality *l, >> uint32_t flags) >> */ >> static void tpm_tis_tpm_send(TPMState *s, uint8_t locty) >> { >> - if (DEBUG_TIS) { >> + if (trace_event_get_state_backends(TRACE_TPM_TIS_SHOW_BUFFER)) { >> tpm_tis_show_buffer(s->buffer, s->be_buffer_size, >> "tpm_tis: To TPM"); >> } >> @@ -315,7 +324,7 @@ static void tpm_tis_request_completed(TPMIf *ti, >> int ret) >> s->loc[locty].state = TPM_TIS_STATE_COMPLETION; >> s->rw_offset = 0; >> - if (DEBUG_TIS) { >> + if (trace_event_get_state_backends(TRACE_TPM_TIS_SHOW_BUFFER)) { >> tpm_tis_show_buffer(s->buffer, s->be_buffer_size, >> "tpm_tis: From TPM"); >> } >> diff --git a/hw/tpm/trace-events b/hw/tpm/trace-events >> index 920d32ad5514..c0267d075027 100644 >> --- a/hw/tpm/trace-events >> +++ b/hw/tpm/trace-events >> @@ -36,6 +36,7 @@ tpm_emulator_pre_save(void) "" >> tpm_emulator_inst_init(void) "" >> # hw/tpm/tpm_tis.c >> +tpm_tis_show_buffer(const char *string, size_t len, const char *line) >> "tpm_tis: %s length = %zu\n%s" >> tpm_tis_raise_irq(uint32_t irqmask) "Raising IRQ for flag 0x%08x" >> tpm_tis_new_active_locality(uint8_t locty) "Active locality is now %d" >> tpm_tis_abort(uint8_t locty) "New active locality is %d" > >
diff --git a/hw/tpm/tpm_tis.c b/hw/tpm/tpm_tis.c index 772431f20874..18e19d5f900d 100644 --- a/hw/tpm/tpm_tis.c +++ b/hw/tpm/tpm_tis.c @@ -108,17 +108,26 @@ static uint8_t tpm_tis_locality_from_addr(hwaddr addr) static void tpm_tis_show_buffer(const unsigned char *buffer, size_t buffer_size, const char *string) { - uint32_t len, i; + size_t len, i; + char *line_buffer, *p; len = MIN(tpm_cmd_get_size(buffer), buffer_size); - printf("tpm_tis: %s length = %d\n", string, len); - for (i = 0; i < len; i++) { + + /* + * allocate enough room for 3 chars per buffer entry plus + * a newline after every 16 chars. + */ + line_buffer = g_malloc(len * 3 + (len / 16)); + + for (i = 0, p = line_buffer; i < len; i++) { if (i && !(i % 16)) { - printf("\n"); + p += sprintf(p, "\n"); } - printf("%.2X ", buffer[i]); + p += sprintf(p, "%.2X ", buffer[i]); } - printf("\n"); + trace_tpm_tis_show_buffer(string, len, line_buffer); + + g_free(line_buffer); } /* @@ -145,7 +154,7 @@ static void tpm_tis_sts_set(TPMLocality *l, uint32_t flags) */ static void tpm_tis_tpm_send(TPMState *s, uint8_t locty) { - if (DEBUG_TIS) { + if (trace_event_get_state_backends(TRACE_TPM_TIS_SHOW_BUFFER)) { tpm_tis_show_buffer(s->buffer, s->be_buffer_size, "tpm_tis: To TPM"); } @@ -315,7 +324,7 @@ static void tpm_tis_request_completed(TPMIf *ti, int ret) s->loc[locty].state = TPM_TIS_STATE_COMPLETION; s->rw_offset = 0; - if (DEBUG_TIS) { + if (trace_event_get_state_backends(TRACE_TPM_TIS_SHOW_BUFFER)) { tpm_tis_show_buffer(s->buffer, s->be_buffer_size, "tpm_tis: From TPM"); } diff --git a/hw/tpm/trace-events b/hw/tpm/trace-events index 920d32ad5514..c0267d075027 100644 --- a/hw/tpm/trace-events +++ b/hw/tpm/trace-events @@ -36,6 +36,7 @@ tpm_emulator_pre_save(void) "" tpm_emulator_inst_init(void) "" # hw/tpm/tpm_tis.c +tpm_tis_show_buffer(const char *string, size_t len, const char *line) "tpm_tis: %s length = %zu\n%s" tpm_tis_raise_irq(uint32_t irqmask) "Raising IRQ for flag 0x%08x" tpm_tis_new_active_locality(uint8_t locty) "Active locality is now %d" tpm_tis_abort(uint8_t locty) "New active locality is %d"
cppcheck reports: [hw/tpm/tpm_tis.c:113]: (warning) %d in format string (no. 2) requires 'int' but the argument type is 'unsigned int' Rather than just converting the format specifier to use '%u", the tpm_tis_show_buffer() function is converted to use trace points and the two debug callers use the trace event infrastructure so that it's available in production cases also and not just when DEBUG_TIS is enabled. Signed-off-by: Liam Merwick <liam.merwick@oracle.com> --- Sample trace output % echo tpm_tis_show_buffer > /tmp/events % export QTEST_QEMU_BINARY="/home/Development/qemu-upstream/x86_64-softmmu/qemu-system-x86_64 --trace events=/tmp/events" % tests/tpm-tis-test /D=/home/Development/qemu-upstream/hw/tpm/tpm-tis/test_check_localities: OK /D=/home/Development/qemu-upstream/hw/tpm/tpm-tis/test_check_access_reg: OK /D=/home/Development/qemu-upstream/hw/tpm/tpm-tis/test_check_access_reg_seize: OK /D=/home/Development/qemu-upstream/hw/tpm/tpm-tis/test_check_access_reg_release: OK /D=/home/Development/qemu-upstream/hw/tpm/tpm-tis/test_check_transmit: OK % ./scripts/simpletrace.py trace-events-all trace-30665 tpm_tis_show_buffer 0.000 pid=30665 string=tpm_tis: To TPM len=0xc line=80 01 00 00 00 0C 00 00 01 44 00 00 tpm_tis_show_buffer 256.581 pid=30665 string=tpm_tis: From TPM len=0xa line=80 01 00 00 00 0A 00 00 01 01 hw/tpm/tpm_tis.c | 25 +++++++++++++++++-------- hw/tpm/trace-events | 1 + 2 files changed, 18 insertions(+), 8 deletions(-)