| Message ID | 362e90167292e8d0c03a8d0753cc26b89549d854.1550518128.git.mchehab+samsung@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | None | expand |
Hi Mauro, Thanks for your patch, On 2019-02-18 14:29:00 -0500, Mauro Carvalho Chehab wrote: > Use codespell to fix lots of typos over frontends. > > Manually verified to avoid false-positives. > > Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> For drivers/media/platform/rcar-vin/* Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> > --- > drivers/media/platform/Kconfig | 2 +- > drivers/media/platform/atmel/atmel-isi.c | 4 ++-- > drivers/media/platform/coda/coda-jpeg.c | 2 +- > drivers/media/platform/davinci/isif.c | 4 ++-- > drivers/media/platform/davinci/vpbe.c | 2 +- > drivers/media/platform/davinci/vpif.c | 2 +- > drivers/media/platform/davinci/vpif_display.c | 4 ++-- > .../media/platform/exynos4-is/fimc-is-command.h | 2 +- > drivers/media/platform/exynos4-is/fimc-is-param.h | 2 +- > drivers/media/platform/exynos4-is/media-dev.h | 2 +- > drivers/media/platform/exynos4-is/mipi-csis.c | 4 ++-- > drivers/media/platform/marvell-ccic/mmp-driver.c | 4 ++-- > drivers/media/platform/mtk-mdp/mtk_mdp_core.h | 6 +++--- > drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c | 2 +- > drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h | 4 ++-- > drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c | 2 +- > .../media/platform/mtk-vcodec/vdec/vdec_h264_if.c | 4 ++-- > .../media/platform/mtk-vcodec/vdec/vdec_vp8_if.c | 2 +- > drivers/media/platform/mtk-vcodec/vdec_drv_if.h | 2 +- > drivers/media/platform/mtk-vcodec/vdec_vpu_if.h | 2 +- > drivers/media/platform/omap/omap_vout.c | 4 ++-- > drivers/media/platform/omap/omap_voutdef.h | 4 ++-- > drivers/media/platform/omap3isp/isp.c | 2 +- > drivers/media/platform/omap3isp/ispccdc.c | 4 ++-- > drivers/media/platform/omap3isp/ispcsi2.c | 2 +- > drivers/media/platform/pxa_camera.c | 2 +- > drivers/media/platform/qcom/venus/core.h | 2 +- > drivers/media/platform/rcar-vin/rcar-dma.c | 2 +- > drivers/media/platform/rcar-vin/rcar-v4l2.c | 4 ++-- > drivers/media/platform/rockchip/rga/rga-hw.c | 6 +++--- > drivers/media/platform/s3c-camif/camif-core.h | 2 +- > drivers/media/platform/s5p-jpeg/jpeg-core.h | 4 ++-- > drivers/media/platform/s5p-mfc/s5p_mfc_common.h | 2 +- > drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c | 2 +- > drivers/media/platform/s5p-mfc/s5p_mfc_dec.c | 2 +- > drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c | 2 +- > drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c | 4 ++-- > .../media/platform/sti/c8sectpfe/c8sectpfe-core.h | 2 +- > drivers/media/platform/sti/delta/delta.h | 2 +- > drivers/media/platform/sti/hva/hva-h264.c | 2 +- > drivers/media/platform/stm32/stm32-dcmi.c | 2 +- > drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h | 2 +- > drivers/media/platform/ti-vpe/vpdma.c | 14 +++++++------- > drivers/media/platform/ti-vpe/vpe.c | 2 +- > drivers/media/platform/vsp1/vsp1_brx.c | 4 ++-- > drivers/media/platform/xilinx/xilinx-vip.c | 2 +- > 46 files changed, 70 insertions(+), 70 deletions(-) > > diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig > index 6cff26b29a38..4acbed189644 100644 > --- a/drivers/media/platform/Kconfig > +++ b/drivers/media/platform/Kconfig > @@ -668,7 +668,7 @@ menuconfig SDR_PLATFORM_DRIVERS > if SDR_PLATFORM_DRIVERS > > config VIDEO_RCAR_DRIF > - tristate "Renesas Digitial Radio Interface (DRIF)" > + tristate "Renesas Digital Radio Interface (DRIF)" > depends on VIDEO_V4L2 > depends on ARCH_RENESAS || COMPILE_TEST > select VIDEOBUF2_VMALLOC > diff --git a/drivers/media/platform/atmel/atmel-isi.c b/drivers/media/platform/atmel/atmel-isi.c > index fdb255e4a956..08b8d5583080 100644 > --- a/drivers/media/platform/atmel/atmel-isi.c > +++ b/drivers/media/platform/atmel/atmel-isi.c > @@ -110,7 +110,7 @@ struct atmel_isi { > bool enable_preview_path; > > struct completion complete; > - /* ISI peripherial clock */ > + /* ISI peripheral clock */ > struct clk *pclk; > unsigned int irq; > > @@ -1078,7 +1078,7 @@ static void isi_graph_notify_unbind(struct v4l2_async_notifier *notifier, > > dev_dbg(isi->dev, "Removing %s\n", video_device_node_name(isi->vdev)); > > - /* Checks internaly if vdev have been init or not */ > + /* Checks internally if vdev have been init or not */ > video_unregister_device(isi->vdev); > } > > diff --git a/drivers/media/platform/coda/coda-jpeg.c b/drivers/media/platform/coda/coda-jpeg.c > index 9f899a6cefed..39a2351c1e48 100644 > --- a/drivers/media/platform/coda/coda-jpeg.c > +++ b/drivers/media/platform/coda/coda-jpeg.c > @@ -103,7 +103,7 @@ static const unsigned char chroma_ac_value[162 + 2] = { > > /* > * Quantization tables for luminance and chrominance components in > - * zig-zag scan order from the Freescale i.MX VPU libaries > + * zig-zag scan order from the Freescale i.MX VPU libraries > */ > > static unsigned char luma_q[64] = { > diff --git a/drivers/media/platform/davinci/isif.c b/drivers/media/platform/davinci/isif.c > index 340f8218f54d..47cecd10eb9f 100644 > --- a/drivers/media/platform/davinci/isif.c > +++ b/drivers/media/platform/davinci/isif.c > @@ -328,7 +328,7 @@ static void isif_config_bclamp(struct isif_black_clamp *bc) > if (bc->en) { > val = bc->bc_mode_color << ISIF_BC_MODE_COLOR_SHIFT; > > - /* Enable BC and horizontal clamp caculation paramaters */ > + /* Enable BC and horizontal clamp calculation parameters */ > val = val | 1 | (bc->horz.mode << ISIF_HORZ_BC_MODE_SHIFT); > > regw(val, CLAMPCFG); > @@ -358,7 +358,7 @@ static void isif_config_bclamp(struct isif_black_clamp *bc) > regw(bc->horz.win_start_v_calc, CLHWIN2); > } > > - /* vertical clamp caculation paramaters */ > + /* vertical clamp calculation parameters */ > > /* Reset clamp value sel for previous line */ > val |= > diff --git a/drivers/media/platform/davinci/vpbe.c b/drivers/media/platform/davinci/vpbe.c > index 4766a7a23d16..8339163a5231 100644 > --- a/drivers/media/platform/davinci/vpbe.c > +++ b/drivers/media/platform/davinci/vpbe.c > @@ -242,7 +242,7 @@ static int vpbe_set_output(struct vpbe_device *vpbe_dev, int index) > goto unlock; > > /* > - * It is assumed that venc or extenal encoder will set a default > + * It is assumed that venc or external encoder will set a default > * mode in the sub device. For external encoder or LCD pannel output, > * we also need to set up the lcd port for the required mode. So setup > * the lcd port for the default mode that is configured in the board > diff --git a/drivers/media/platform/davinci/vpif.c b/drivers/media/platform/davinci/vpif.c > index 16352e2263d2..df66461f5d4f 100644 > --- a/drivers/media/platform/davinci/vpif.c > +++ b/drivers/media/platform/davinci/vpif.c > @@ -1,7 +1,7 @@ > /* > * vpif - Video Port Interface driver > * VPIF is a receiver and transmitter for video data. It has two channels(0, 1) > - * that receiveing video byte stream and two channels(2, 3) for video output. > + * that receiving video byte stream and two channels(2, 3) for video output. > * The hardware supports SDTV, HDTV formats, raw data capture. > * Currently, the driver supports NTSC and PAL standards. > * > diff --git a/drivers/media/platform/davinci/vpif_display.c b/drivers/media/platform/davinci/vpif_display.c > index 3517487d9760..f4b4f2a1dfc0 100644 > --- a/drivers/media/platform/davinci/vpif_display.c > +++ b/drivers/media/platform/davinci/vpif_display.c > @@ -138,7 +138,7 @@ static int vpif_buffer_queue_setup(struct vb2_queue *vq, > * vpif_buffer_queue : Callback function to add buffer to DMA queue > * @vb: ptr to vb2_buffer > * > - * This callback fucntion queues the buffer to DMA engine > + * This callback function queues the buffer to DMA engine > */ > static void vpif_buffer_queue(struct vb2_buffer *vb) > { > @@ -635,7 +635,7 @@ static int vpif_try_fmt_vid_out(struct file *file, void *priv, > struct v4l2_pix_format *pixfmt = &fmt->fmt.pix; > > /* > - * to supress v4l-compliance warnings silently correct > + * to suppress v4l-compliance warnings silently correct > * the pixelformat > */ > if (pixfmt->pixelformat != V4L2_PIX_FMT_YUV422P) > diff --git a/drivers/media/platform/exynos4-is/fimc-is-command.h b/drivers/media/platform/exynos4-is/fimc-is-command.h > index 0d1f52e394b1..b06b56b890d5 100644 > --- a/drivers/media/platform/exynos4-is/fimc-is-command.h > +++ b/drivers/media/platform/exynos4-is/fimc-is-command.h > @@ -18,7 +18,7 @@ > > #define FIMC_IS_COMMAND_VER 110 /* FIMC-IS command set version 1.10 */ > > -/* Enumeration of commands beetween the FIMC-IS and the host processor. */ > +/* Enumeration of commands between the FIMC-IS and the host processor. */ > > /* HOST to FIMC-IS */ > #define HIC_PREVIEW_STILL 0x0001 > diff --git a/drivers/media/platform/exynos4-is/fimc-is-param.h b/drivers/media/platform/exynos4-is/fimc-is-param.h > index 8e31f7642776..22923a3d405e 100644 > --- a/drivers/media/platform/exynos4-is/fimc-is-param.h > +++ b/drivers/media/platform/exynos4-is/fimc-is-param.h > @@ -298,7 +298,7 @@ enum isp_af_mode { > #define ISP_FLASH_COMMAND_AUTO 2 > #define ISP_FLASH_COMMAND_TORCH 3 /* 3 sec */ > > -/* Flash red-eye commads */ > +/* Flash red-eye commands */ > #define ISP_FLASH_REDEYE_DISABLE 0 > #define ISP_FLASH_REDEYE_ENABLE 1 > > diff --git a/drivers/media/platform/exynos4-is/media-dev.h b/drivers/media/platform/exynos4-is/media-dev.h > index 9f527670395a..a7c9490bbcb4 100644 > --- a/drivers/media/platform/exynos4-is/media-dev.h > +++ b/drivers/media/platform/exynos4-is/media-dev.h > @@ -79,7 +79,7 @@ struct fimc_camclk_info { > > /** > * struct fimc_sensor_info - image data source subdev information > - * @pdata: sensor's atrributes passed as media device's platform data > + * @pdata: sensor's attributes passed as media device's platform data > * @asd: asynchronous subdev registration data structure > * @subdev: image sensor v4l2 subdev > * @host: fimc device the sensor is currently linked to > diff --git a/drivers/media/platform/exynos4-is/mipi-csis.c b/drivers/media/platform/exynos4-is/mipi-csis.c > index 35cb0162085b..234e047e3e8f 100644 > --- a/drivers/media/platform/exynos4-is/mipi-csis.c > +++ b/drivers/media/platform/exynos4-is/mipi-csis.c > @@ -183,7 +183,7 @@ struct csis_drvdata { > * @index: the hardware instance index > * @pdev: CSIS platform device > * @phy: pointer to the CSIS generic PHY > - * @regs: mmaped I/O registers memory > + * @regs: mmapped I/O registers memory > * @supplies: CSIS regulator supplies > * @clock: CSIS clocks > * @irq: requested s5p-mipi-csis irq number > @@ -745,7 +745,7 @@ static int s5pcsis_parse_dt(struct platform_device *pdev, > goto err; > } > > - /* Get MIPI CSI-2 bus configration from the endpoint node. */ > + /* Get MIPI CSI-2 bus configuration from the endpoint node. */ > of_property_read_u32(node, "samsung,csis-hs-settle", > &state->hs_settle); > state->wclk_ext = of_property_read_bool(node, > diff --git a/drivers/media/platform/marvell-ccic/mmp-driver.c b/drivers/media/platform/marvell-ccic/mmp-driver.c > index 70a2833db0d1..af76eb637773 100644 > --- a/drivers/media/platform/marvell-ccic/mmp-driver.c > +++ b/drivers/media/platform/marvell-ccic/mmp-driver.c > @@ -240,8 +240,8 @@ static void mmpcam_calc_dphy(struct mcam_camera *mcam) > * bit 8 ~ bit 15: HS_SETTLE > * Time interval during which the HS > * receiver shall ignore any Data Lane > - * HS transistions. > - * The vaule has been calibrated on > + * HS transitions. > + * The value has been calibrated on > * different boards. It seems to work well. > * > * More detail please refer > diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_core.h b/drivers/media/platform/mtk-mdp/mtk_mdp_core.h > index ad1cff306efd..e5abb1abb3a3 100644 > --- a/drivers/media/platform/mtk-mdp/mtk_mdp_core.h > +++ b/drivers/media/platform/mtk-mdp/mtk_mdp_core.h > @@ -41,7 +41,7 @@ > #define MTK_MDP_CTX_ERROR BIT(5) > > /** > - * struct mtk_mdp_pix_align - alignement of image > + * struct mtk_mdp_pix_align - alignment of image > * @org_w: source alignment of width > * @org_h: source alignment of height > * @target_w: dst alignment of width > @@ -122,8 +122,8 @@ struct mtk_mdp_frame { > /** > * struct mtk_mdp_variant - image processor variant information > * @pix_max: maximum limit of image size > - * @pix_min: minimun limit of image size > - * @pix_align: alignement of image > + * @pix_min: minimum limit of image size > + * @pix_align: alignment of image > * @h_scale_up_max: maximum scale-up in horizontal > * @v_scale_up_max: maximum scale-up in vertical > * @h_scale_down_max: maximum scale-down in horizontal > diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c > index ba619647bc10..794aba685120 100644 > --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c > +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c > @@ -1170,7 +1170,7 @@ static void vb2ops_vdec_buf_queue(struct vb2_buffer *vb) > ret = vdec_if_decode(ctx, &src_mem, NULL, &res_chg); > if (ret || !res_chg) { > /* > - * fb == NULL menas to parse SPS/PPS header or > + * fb == NULL means to parse SPS/PPS header or > * resolution info in src_mem. Decode can fail > * if there is no SPS header or picture info > * in bs > diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h > index 8aba69555b12..e7e2a108def9 100644 > --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h > +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h > @@ -151,9 +151,9 @@ struct mtk_q_data { > * @intra_period: I frame period > * @gop_size: group of picture size, it's used as the intra frame period > * @framerate_num: frame rate numerator. ex: framerate_num=30 and > - * framerate_denom=1 menas FPS is 30 > + * framerate_denom=1 means FPS is 30 > * @framerate_denom: frame rate denominator. ex: framerate_num=30 and > - * framerate_denom=1 menas FPS is 30 > + * framerate_denom=1 means FPS is 30 > * @h264_max_qp: Max value for H.264 quantization parameter > * @h264_profile: V4L2 defined H.264 profile > * @h264_level: V4L2 defined H.264 level > diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c > index d1f12257bf66..2af654240d96 100644 > --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c > +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c > @@ -393,7 +393,7 @@ static void mtk_venc_set_param(struct mtk_vcodec_ctx *ctx, > param->input_yuv_fmt = VENC_YUV_FORMAT_NV21; > break; > default: > - mtk_v4l2_err("Unsupport fourcc =%d", q_data_src->fmt->fourcc); > + mtk_v4l2_err("Unsupported fourcc =%d", q_data_src->fmt->fourcc); > break; > } > param->h264_profile = enc_params->h264_profile; > diff --git a/drivers/media/platform/mtk-vcodec/vdec/vdec_h264_if.c b/drivers/media/platform/mtk-vcodec/vdec/vdec_h264_if.c > index aa3ce41898bc..02c960c63ac0 100644 > --- a/drivers/media/platform/mtk-vcodec/vdec/vdec_h264_if.c > +++ b/drivers/media/platform/mtk-vcodec/vdec/vdec_h264_if.c > @@ -55,7 +55,7 @@ struct h264_fb { > > /** > * struct h264_ring_fb_list - ring frame buffer list > - * @fb_list : frame buffer arrary > + * @fb_list : frame buffer array > * @read_idx : read index > * @write_idx : write index > * @count : buffer count in list > @@ -72,7 +72,7 @@ struct h264_ring_fb_list { > /** > * struct vdec_h264_dec_info - decode information > * @dpb_sz : decoding picture buffer size > - * @resolution_changed : resoltion change happen > + * @resolution_changed : resolution change happen > * @realloc_mv_buf : flag to notify driver to re-allocate mv buffer > * @reserved : for 8 bytes alignment > * @bs_dma : Input bit-stream buffer dma address > diff --git a/drivers/media/platform/mtk-vcodec/vdec/vdec_vp8_if.c b/drivers/media/platform/mtk-vcodec/vdec/vdec_vp8_if.c > index 3e84a761db3a..bac3723038de 100644 > --- a/drivers/media/platform/mtk-vcodec/vdec/vdec_vp8_if.c > +++ b/drivers/media/platform/mtk-vcodec/vdec/vdec_vp8_if.c > @@ -120,7 +120,7 @@ struct vdec_vp8_hw_reg_base { > /** > * struct vdec_vp8_vpu_inst - VPU instance for VP8 decode > * @wq_hd : Wait queue to wait VPU message ack > - * @signaled : 1 - Host has received ack message from VPU, 0 - not recevie > + * @signaled : 1 - Host has received ack message from VPU, 0 - not receive > * @failure : VPU execution result status 0 - success, others - fail > * @inst_addr : VPU decoder instance address > */ > diff --git a/drivers/media/platform/mtk-vcodec/vdec_drv_if.h b/drivers/media/platform/mtk-vcodec/vdec_drv_if.h > index ded1154481cd..9a21591f3818 100644 > --- a/drivers/media/platform/mtk-vcodec/vdec_drv_if.h > +++ b/drivers/media/platform/mtk-vcodec/vdec_drv_if.h > @@ -80,7 +80,7 @@ void vdec_if_deinit(struct mtk_vcodec_ctx *ctx); > * vdec_if_decode() - trigger decode > * @ctx : [in] v4l2 context > * @bs : [in] input bitstream > - * @fb : [in] frame buffer to store decoded frame, when null menas parse > + * @fb : [in] frame buffer to store decoded frame, when null means parse > * header only > * @res_chg : [out] resolution change happens if current bs have different > * picture width/height > diff --git a/drivers/media/platform/mtk-vcodec/vdec_vpu_if.h b/drivers/media/platform/mtk-vcodec/vdec_vpu_if.h > index cd37bb2a610f..79d8eac7f5e2 100644 > --- a/drivers/media/platform/mtk-vcodec/vdec_vpu_if.h > +++ b/drivers/media/platform/mtk-vcodec/vdec_vpu_if.h > @@ -62,7 +62,7 @@ int vpu_dec_start(struct vdec_vpu_inst *vpu, uint32_t *data, unsigned int len); > /** > * vpu_dec_end - end decoding, basically the function will be invoked once > * when HW decoding done interrupt received successfully. The > - * decoder in VPU will continute to do referene frame management > + * decoder in VPU will continue to do reference frame management > * and check if there is a new decoded frame available to display. > * > * @vpu : instance for vdec_vpu_inst > diff --git a/drivers/media/platform/omap/omap_vout.c b/drivers/media/platform/omap/omap_vout.c > index ff3de2dce5a2..37f0d7146dfa 100644 > --- a/drivers/media/platform/omap/omap_vout.c > +++ b/drivers/media/platform/omap/omap_vout.c > @@ -1129,7 +1129,7 @@ static int vidioc_s_fmt_vid_out(struct file *file, void *fh, > } > timing = &dssdev->panel.timings; > > - /* We dont support RGB24-packed mode if vrfb rotation > + /* We don't support RGB24-packed mode if vrfb rotation > * is enabled*/ > if ((is_rotation_enabled(vout)) && > f->fmt.pix.pixelformat == V4L2_PIX_FMT_RGB24) { > @@ -1147,7 +1147,7 @@ static int vidioc_s_fmt_vid_out(struct file *file, void *fh, > vout->fbuf.fmt.width = timing->x_res; > } > > - /* change to samller size is OK */ > + /* change to smaller size is OK */ > > bpp = omap_vout_try_format(&f->fmt.pix); > f->fmt.pix.sizeimage = f->fmt.pix.width * f->fmt.pix.height * bpp; > diff --git a/drivers/media/platform/omap/omap_voutdef.h b/drivers/media/platform/omap/omap_voutdef.h > index 56b630b1c8b4..c740393c8509 100644 > --- a/drivers/media/platform/omap/omap_voutdef.h > +++ b/drivers/media/platform/omap/omap_voutdef.h > @@ -37,7 +37,7 @@ > #define VID_MAX_WIDTH 1280 /* Largest width */ > #define VID_MAX_HEIGHT 720 /* Largest height */ > > -/* Mimimum requirement is 2x2 for DSS */ > +/* Minimum requirement is 2x2 for DSS */ > #define VID_MIN_WIDTH 2 > #define VID_MIN_HEIGHT 2 > > @@ -135,7 +135,7 @@ struct omap_vout_device { > enum omap_color_mode dss_mode; > > /* we don't allow to request new buffer when old buffers are > - * still mmaped > + * still mmapped > */ > int mmap_count; > > diff --git a/drivers/media/platform/omap3isp/isp.c b/drivers/media/platform/omap3isp/isp.c > index 13f2828d880d..bd57174d81a7 100644 > --- a/drivers/media/platform/omap3isp/isp.c > +++ b/drivers/media/platform/omap3isp/isp.c > @@ -1517,7 +1517,7 @@ void omap3isp_print_status(struct isp_device *isp) > * > * To solve this problem power management support is split into prepare/complete > * and suspend/resume operations. The pipelines are stopped in prepare() and the > - * ISP clocks get disabled in suspend(). Similarly, the clocks are reenabled in > + * ISP clocks get disabled in suspend(). Similarly, the clocks are re-enabled in > * resume(), and the the pipelines are restarted in complete(). > * > * TODO: PM dependencies between the ISP and sensors are not modelled explicitly > diff --git a/drivers/media/platform/omap3isp/ispccdc.c b/drivers/media/platform/omap3isp/ispccdc.c > index 14a1c24037c4..261ad1175f98 100644 > --- a/drivers/media/platform/omap3isp/ispccdc.c > +++ b/drivers/media/platform/omap3isp/ispccdc.c > @@ -1594,7 +1594,7 @@ static int ccdc_isr_buffer(struct isp_ccdc_device *ccdc) > return 0; > > /* We're in continuous mode, and memory writes were disabled due to a > - * buffer underrun. Reenable them now that we have a buffer. The buffer > + * buffer underrun. Re-enable them now that we have a buffer. The buffer > * address has been set in ccdc_video_queue. > */ > if (ccdc->state == ISP_PIPELINE_STREAM_CONTINUOUS && ccdc->underrun) { > @@ -1712,7 +1712,7 @@ static void ccdc_vd1_isr(struct isp_ccdc_device *ccdc) > * data to memory the CCDC and LSC are stopped immediately but > * without change the CCDC stopping state machine. The CCDC > * stopping state machine should be used only when user request > - * for stopping is received (SINGLESHOT is an exeption). > + * for stopping is received (SINGLESHOT is an exception). > */ > switch (ccdc->state) { > case ISP_PIPELINE_STREAM_SINGLESHOT: > diff --git a/drivers/media/platform/omap3isp/ispcsi2.c b/drivers/media/platform/omap3isp/ispcsi2.c > index 9c180f607bcb..da66ea65be5d 100644 > --- a/drivers/media/platform/omap3isp/ispcsi2.c > +++ b/drivers/media/platform/omap3isp/ispcsi2.c > @@ -710,7 +710,7 @@ static void csi2_isr_ctx(struct isp_csi2_device *csi2, > > /* Skip interrupts until we reach the frame skip count. The CSI2 will be > * automatically disabled, as the frame skip count has been programmed > - * in the CSI2_CTx_CTRL1::COUNT field, so reenable it. > + * in the CSI2_CTx_CTRL1::COUNT field, so re-enable it. > * > * It would have been nice to rely on the FRAME_NUMBER interrupt instead > * but it turned out that the interrupt is only generated when the CSI2 > diff --git a/drivers/media/platform/pxa_camera.c b/drivers/media/platform/pxa_camera.c > index 3cf3c6390cc8..4fe228752a43 100644 > --- a/drivers/media/platform/pxa_camera.c > +++ b/drivers/media/platform/pxa_camera.c > @@ -1631,7 +1631,7 @@ static int pxa_camera_set_bus_param(struct pxa_camera_dev *pcdev) > > pcdev->channels = 1; > > - /* Make choises, based on platform preferences */ > + /* Make choices, based on platform preferences */ > if ((common_flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH) && > (common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)) { > if (pcdev->platform_flags & PXA_CAMERA_HSP) > diff --git a/drivers/media/platform/qcom/venus/core.h b/drivers/media/platform/qcom/venus/core.h > index 79c7e816c706..7a3feb5cee00 100644 > --- a/drivers/media/platform/qcom/venus/core.h > +++ b/drivers/media/platform/qcom/venus/core.h > @@ -219,7 +219,7 @@ struct venus_buffer { > #define to_venus_buffer(ptr) container_of(ptr, struct venus_buffer, vb) > > /** > - * struct venus_inst - holds per instance paramerters > + * struct venus_inst - holds per instance parameters > * > * @list: used for attach an instance to the core > * @lock: instance lock > diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c > index beb9248992a4..2207a31d355e 100644 > --- a/drivers/media/platform/rcar-vin/rcar-dma.c > +++ b/drivers/media/platform/rcar-vin/rcar-dma.c > @@ -681,7 +681,7 @@ static int rvin_setup(struct rvin_dev *vin) > break; > } > > - /* Enable VSYNC Field Toogle mode after one VSYNC input */ > + /* Enable VSYNC Field Toggle mode after one VSYNC input */ > if (vin->info->model == RCAR_GEN3) > dmr2 = VNDMR2_FTEV; > else > diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c > index 7a2851790b91..7cbdcbf9b090 100644 > --- a/drivers/media/platform/rcar-vin/rcar-v4l2.c > +++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c > @@ -665,7 +665,7 @@ static void rvin_mc_try_format(struct rvin_dev *vin, > * The V4L2 specification clearly documents the colorspace fields > * as being set by drivers for capture devices. Using the values > * supplied by userspace thus wouldn't comply with the API. Until > - * the API is updated force fixed vaules. > + * the API is updated force fixed values. > */ > pix->colorspace = RVIN_DEFAULT_COLORSPACE; > pix->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(pix->colorspace); > @@ -964,7 +964,7 @@ void rvin_v4l2_unregister(struct rvin_dev *vin) > v4l2_info(&vin->v4l2_dev, "Removing %s\n", > video_device_node_name(&vin->vdev)); > > - /* Checks internaly if vdev have been init or not */ > + /* Checks internally if vdev have been init or not */ > video_unregister_device(&vin->vdev); > } > > diff --git a/drivers/media/platform/rockchip/rga/rga-hw.c b/drivers/media/platform/rockchip/rga/rga-hw.c > index 96d1b1b3fe8e..843e50d17a72 100644 > --- a/drivers/media/platform/rockchip/rga/rga-hw.c > +++ b/drivers/media/platform/rockchip/rga/rga-hw.c > @@ -256,7 +256,7 @@ static void rga_cmd_set_trans_info(struct rga_ctx *ctx) > } > > /* > - * Cacluate the up/down scaling mode/factor. > + * Calculate the up/down scaling mode/factor. > * > * RGA used to scale the picture first, and then rotate second, > * so we need to swap the w/h when rotate degree is 90/270. > @@ -304,7 +304,7 @@ static void rga_cmd_set_trans_info(struct rga_ctx *ctx) > } > > /* > - * Cacluate the framebuffer virtual strides and active size, > + * Calculate the framebuffer virtual strides and active size, > * note that the step of vir_stride / vir_width is 4 byte words > */ > src_vir_info.data.vir_stride = ctx->in.stride >> 2; > @@ -318,7 +318,7 @@ static void rga_cmd_set_trans_info(struct rga_ctx *ctx) > dst_act_info.data.act_width = dst_w - 1; > > /* > - * Cacluate the source framebuffer base address with offset pixel. > + * Calculate the source framebuffer base address with offset pixel. > */ > src_offsets = rga_get_addr_offset(&ctx->in, src_x, src_y, > src_w, src_h); > diff --git a/drivers/media/platform/s3c-camif/camif-core.h b/drivers/media/platform/s3c-camif/camif-core.h > index 1f5c8c94ce89..be5e7357dffc 100644 > --- a/drivers/media/platform/s3c-camif/camif-core.h > +++ b/drivers/media/platform/s3c-camif/camif-core.h > @@ -260,7 +260,7 @@ struct camif_vp { > * @clock: clocks required for the CAMIF operation > * @lock: mutex protecting this data structure > * @slock: spinlock protecting CAMIF registers > - * @io_base: start address of the mmaped CAMIF registers > + * @io_base: start address of the mmapped CAMIF registers > */ > struct camif_dev { > struct media_device media_dev; > diff --git a/drivers/media/platform/s5p-jpeg/jpeg-core.h b/drivers/media/platform/s5p-jpeg/jpeg-core.h > index 90fda4b720eb..144c102ff05f 100644 > --- a/drivers/media/platform/s5p-jpeg/jpeg-core.h > +++ b/drivers/media/platform/s5p-jpeg/jpeg-core.h > @@ -153,7 +153,7 @@ struct s5p_jpeg_variant { > > /** > * struct jpeg_fmt - driver's internal color format data > - * @name: format descritpion > + * @name: format description > * @fourcc: the fourcc code, 0 if not applicable > * @depth: number of bits per pixel > * @colplanes: number of color planes (1 for packed formats) > @@ -193,7 +193,7 @@ struct s5p_jpeg_marker { > * @sos: SOS marker's position relative to the buffer beginning > * @dht: DHT markers' positions relative to the buffer beginning > * @dqt: DQT markers' positions relative to the buffer beginning > - * @sof: SOF0 marker's postition relative to the buffer beginning > + * @sof: SOF0 marker's position relative to the buffer beginning > * @sof_len: SOF0 marker's payload length (without length field itself) > * @components: number of image components > * @size: image buffer size in bytes > diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h > index 20442a9b9f7a..24148020baa9 100644 > --- a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h > +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h > @@ -268,7 +268,7 @@ struct s5p_mfc_priv_buf { > * @enc_ctrl_handler: control framework handler for encoding > * @pm: power management control > * @variant: MFC hardware variant information > - * @num_inst: couter of active MFC instances > + * @num_inst: counter of active MFC instances > * @irqlock: lock for operations on videobuf2 queues > * @condlock: lock for changing/checking if a context is ready to be > * processed > diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c > index ee7b15b335e0..9f832ba7bc8c 100644 > --- a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c > +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c > @@ -51,7 +51,7 @@ int s5p_mfc_load_firmware(struct s5p_mfc_dev *dev) > struct firmware *fw_blob; > int i, err = -EINVAL; > > - /* Firmare has to be present as a separate file or compiled > + /* Firmware has to be present as a separate file or compiled > * into kernel. */ > mfc_debug_enter(); > > diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c > index f4c0e3a8f27d..e111f9c47179 100644 > --- a/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c > +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c > @@ -602,7 +602,7 @@ static int vidioc_querybuf(struct file *file, void *priv, > int i; > > if (buf->memory != V4L2_MEMORY_MMAP) { > - mfc_err("Only mmaped buffers can be used\n"); > + mfc_err("Only mmapped buffers can be used\n"); > return -EINVAL; > } > mfc_debug(2, "State: %d, buf->type: %d\n", ctx->state, buf->type); > diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c > index 0913881219ff..6144e95f6425 100644 > --- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c > +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c > @@ -1293,7 +1293,7 @@ static int s5p_mfc_run_init_dec_buffers(struct s5p_mfc_ctx *ctx) > * First set the output frame buffers > */ > if (ctx->capture_state != QUEUE_BUFS_MMAPED) { > - mfc_err("It seems that not all destination buffers were mmaped\nMFC requires that all destination are mmaped before starting processing\n"); > + mfc_err("It seems that not all destination buffers were mmapped\nMFC requires that all destination are mmapped before starting processing\n"); > return -EAGAIN; > } > if (list_empty(&ctx->src_queue)) { > diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c > index 7c629be43205..281699ab7fe1 100644 > --- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c > +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c > @@ -53,7 +53,7 @@ static int s5p_mfc_alloc_dec_temp_buffers_v6(struct s5p_mfc_ctx *ctx) > return 0; > } > > -/* Release temproary buffers for decoding */ > +/* Release temporary buffers for decoding */ > static void s5p_mfc_release_dec_desc_buffer_v6(struct s5p_mfc_ctx *ctx) > { > /* NOP */ > @@ -1928,7 +1928,7 @@ static inline int s5p_mfc_run_init_dec_buffers(struct s5p_mfc_ctx *ctx) > > if (ctx->capture_state != QUEUE_BUFS_MMAPED) { > mfc_err("It seems that not all destination buffers were\n" > - "mmaped.MFC requires that all destination are mmaped\n" > + "mmapped.MFC requires that all destination are mmapped\n" > "before starting processing.\n"); > return -EAGAIN; > } > diff --git a/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.h b/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.h > index 3dbb3a287cc0..c9d6021904cd 100644 > --- a/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.h > +++ b/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.h > @@ -193,7 +193,7 @@ struct c8sectpfei { > #define C8SECTPFE_SYS_ENABLE BIT(0) > > /* > - * Ponter record data structure required for each input block > + * Pointer record data structure required for each input block > * see Table 82 on page 167 of functional specification. > */ > > diff --git a/drivers/media/platform/sti/delta/delta.h b/drivers/media/platform/sti/delta/delta.h > index 2ba99922c05b..914556030e70 100644 > --- a/drivers/media/platform/sti/delta/delta.h > +++ b/drivers/media/platform/sti/delta/delta.h > @@ -286,7 +286,7 @@ struct delta_dec { > * Header parsing must be done using decode(), giving > * explicitly header access unit or first access unit of bitstream. > * If no valid header is found, get_streaminfo will return -ENODATA, > - * in this case the next bistream access unit must be decoded till > + * in this case the next bitstream access unit must be decoded till > * get_streaminfo becomes successful. > */ > int (*get_streaminfo)(struct delta_ctx *ctx, > diff --git a/drivers/media/platform/sti/hva/hva-h264.c b/drivers/media/platform/sti/hva/hva-h264.c > index b61a5d337d2a..c34f7cf5aed2 100644 > --- a/drivers/media/platform/sti/hva/hva-h264.c > +++ b/drivers/media/platform/sti/hva/hva-h264.c > @@ -626,7 +626,7 @@ static int hva_h264_prepare_task(struct hva_ctx *pctx, > td->frame_width = frame_width; > td->frame_height = frame_height; > > - /* set frame alignement */ > + /* set frame alignment */ > td->window_width = frame_width; > td->window_height = frame_height; > td->window_horizontal_offset = 0; > diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c > index 6732874114cf..5fe5b38fa901 100644 > --- a/drivers/media/platform/stm32/stm32-dcmi.c > +++ b/drivers/media/platform/stm32/stm32-dcmi.c > @@ -1544,7 +1544,7 @@ static void dcmi_graph_notify_unbind(struct v4l2_async_notifier *notifier, > > dev_dbg(dcmi->dev, "Removing %s\n", video_device_node_name(dcmi->vdev)); > > - /* Checks internaly if vdev has been init or not */ > + /* Checks internally if vdev has been init or not */ > video_unregister_device(dcmi->vdev); > } > > diff --git a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h > index 0bb000712c33..85f97d4f086e 100644 > --- a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h > +++ b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h > @@ -65,7 +65,7 @@ bool sun6i_csi_is_format_supported(struct sun6i_csi *csi, u32 pixformat, > int sun6i_csi_set_power(struct sun6i_csi *csi, bool enable); > > /** > - * sun6i_csi_update_config() - update the csi register setttings > + * sun6i_csi_update_config() - update the csi register settings > * @csi: pointer to the csi > * @config: see struct sun6i_csi_config > */ > diff --git a/drivers/media/platform/ti-vpe/vpdma.c b/drivers/media/platform/ti-vpe/vpdma.c > index e2cf2b90e500..1da2cb3aaf0c 100644 > --- a/drivers/media/platform/ti-vpe/vpdma.c > +++ b/drivers/media/platform/ti-vpe/vpdma.c > @@ -404,7 +404,7 @@ EXPORT_SYMBOL(vpdma_map_desc_buf); > > /* > * unmap descriptor/payload DMA buffer, disabling DMA access and > - * allowing the main processor to acces the data > + * allowing the main processor to access the data > */ > void vpdma_unmap_desc_buf(struct vpdma_data *vpdma, struct vpdma_buf *buf) > { > @@ -501,7 +501,7 @@ void vpdma_reset_desc_list(struct vpdma_desc_list *list) > EXPORT_SYMBOL(vpdma_reset_desc_list); > > /* > - * free the buffer allocated fot the VPDMA descriptor list, this should be > + * free the buffer allocated for the VPDMA descriptor list, this should be > * called when the user doesn't want to use VPDMA any more. > */ > void vpdma_free_desc_list(struct vpdma_desc_list *list) > @@ -790,7 +790,7 @@ static void dump_dtd(struct vpdma_dtd *dtd) > * append an outbound data transfer descriptor to the given descriptor list, > * this sets up a 'client to memory' VPDMA transfer for the given VPDMA channel > * > - * @list: vpdma desc list to which we add this decriptor > + * @list: vpdma desc list to which we add this descriptor > * @width: width of the image in pixels in memory > * @c_rect: compose params of output image > * @fmt: vpdma data format of the buffer > @@ -798,7 +798,7 @@ static void dump_dtd(struct vpdma_dtd *dtd) > * max_width: enum for maximum width of data transfer > * max_height: enum for maximum height of data transfer > * chan: VPDMA channel > - * flags: VPDMA flags to configure some descriptor fileds > + * flags: VPDMA flags to configure some descriptor fields > */ > void vpdma_add_out_dtd(struct vpdma_desc_list *list, int width, > int stride, const struct v4l2_rect *c_rect, > @@ -863,14 +863,14 @@ EXPORT_SYMBOL(vpdma_rawchan_add_out_dtd); > * append an inbound data transfer descriptor to the given descriptor list, > * this sets up a 'memory to client' VPDMA transfer for the given VPDMA channel > * > - * @list: vpdma desc list to which we add this decriptor > + * @list: vpdma desc list to which we add this descriptor > * @width: width of the image in pixels in memory(not the cropped width) > * @c_rect: crop params of input image > * @fmt: vpdma data format of the buffer > * dma_addr: dma address as seen by VPDMA > * chan: VPDMA channel > * field: top or bottom field info of the input image > - * flags: VPDMA flags to configure some descriptor fileds > + * flags: VPDMA flags to configure some descriptor fields > * frame_width/height: the complete width/height of the image presented to the > * client (this makes sense when multiple channels are > * connected to the same client, forming a larger frame) > @@ -1008,7 +1008,7 @@ unsigned int vpdma_get_list_mask(struct vpdma_data *vpdma, int irq_num) > } > EXPORT_SYMBOL(vpdma_get_list_mask); > > -/* clear previosuly occured list intterupts in the LIST_STAT register */ > +/* clear previously occurred list interupts in the LIST_STAT register */ > void vpdma_clear_list_stat(struct vpdma_data *vpdma, int irq_num, > int list_num) > { > diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c > index d70871d0ad2d..207e7e76c048 100644 > --- a/drivers/media/platform/ti-vpe/vpe.c > +++ b/drivers/media/platform/ti-vpe/vpe.c > @@ -876,7 +876,7 @@ static int set_srcdst_params(struct vpe_ctx *ctx) > /* > * we make sure that the source image has a 16 byte aligned > * stride, we need to do the same for the motion vector buffer > - * by aligning it's stride to the next 16 byte boundry. this > + * by aligning it's stride to the next 16 byte boundary. this > * extra space will not be used by the de-interlacer, but will > * ensure that vpdma operates correctly > */ > diff --git a/drivers/media/platform/vsp1/vsp1_brx.c b/drivers/media/platform/vsp1/vsp1_brx.c > index 5e50178b057d..58ad248cd7f7 100644 > --- a/drivers/media/platform/vsp1/vsp1_brx.c > +++ b/drivers/media/platform/vsp1/vsp1_brx.c > @@ -296,7 +296,7 @@ static void brx_configure_stream(struct vsp1_entity *entity, > /* > * The hardware is extremely flexible but we have no userspace API to > * expose all the parameters, nor is it clear whether we would have use > - * cases for all the supported modes. Let's just harcode the parameters > + * cases for all the supported modes. Let's just hardcode the parameters > * to sane default values for now. > */ > > @@ -373,7 +373,7 @@ static void brx_configure_stream(struct vsp1_entity *entity, > vsp1_brx_write(brx, dlb, VI6_BRU_CTRL(i), ctrl); > > /* > - * Harcode the blending formula to > + * Hardcode the blending formula to > * > * DSTc = DSTc * (1 - SRCa) + SRCc * SRCa > * DSTa = DSTa * (1 - SRCa) + SRCa > diff --git a/drivers/media/platform/xilinx/xilinx-vip.c b/drivers/media/platform/xilinx/xilinx-vip.c > index 18f98838111b..08a825c3a3f6 100644 > --- a/drivers/media/platform/xilinx/xilinx-vip.c > +++ b/drivers/media/platform/xilinx/xilinx-vip.c > @@ -166,7 +166,7 @@ EXPORT_SYMBOL_GPL(xvip_set_format_size); > * the register, otherwise the bitmask is cleared from the register > * when the flag @set is false. > * > - * Fox eample, this function can be used to set a control with a boolean value > + * Fox example, this function can be used to set a control with a boolean value > * requested by users. If the caller knows whether to set or clear in the first > * place, the caller should call xvip_clr() or xvip_set() directly instead of > * using this function. > -- > 2.20.1 >
Hi Mauro, W dniu 18.02.2019 o 20:29, Mauro Carvalho Chehab pisze: > Use codespell to fix lots of typos over frontends. > > Manually verified to avoid false-positives. > > Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> for drivers/media/platform/sp5-jpeg.c: Acked-by: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com> > --- > drivers/media/platform/Kconfig | 2 +- > drivers/media/platform/atmel/atmel-isi.c | 4 ++-- > drivers/media/platform/coda/coda-jpeg.c | 2 +- > drivers/media/platform/davinci/isif.c | 4 ++-- > drivers/media/platform/davinci/vpbe.c | 2 +- > drivers/media/platform/davinci/vpif.c | 2 +- > drivers/media/platform/davinci/vpif_display.c | 4 ++-- > .../media/platform/exynos4-is/fimc-is-command.h | 2 +- > drivers/media/platform/exynos4-is/fimc-is-param.h | 2 +- > drivers/media/platform/exynos4-is/media-dev.h | 2 +- > drivers/media/platform/exynos4-is/mipi-csis.c | 4 ++-- > drivers/media/platform/marvell-ccic/mmp-driver.c | 4 ++-- > drivers/media/platform/mtk-mdp/mtk_mdp_core.h | 6 +++--- > drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c | 2 +- > drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h | 4 ++-- > drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c | 2 +- > .../media/platform/mtk-vcodec/vdec/vdec_h264_if.c | 4 ++-- > .../media/platform/mtk-vcodec/vdec/vdec_vp8_if.c | 2 +- > drivers/media/platform/mtk-vcodec/vdec_drv_if.h | 2 +- > drivers/media/platform/mtk-vcodec/vdec_vpu_if.h | 2 +- > drivers/media/platform/omap/omap_vout.c | 4 ++-- > drivers/media/platform/omap/omap_voutdef.h | 4 ++-- > drivers/media/platform/omap3isp/isp.c | 2 +- > drivers/media/platform/omap3isp/ispccdc.c | 4 ++-- > drivers/media/platform/omap3isp/ispcsi2.c | 2 +- > drivers/media/platform/pxa_camera.c | 2 +- > drivers/media/platform/qcom/venus/core.h | 2 +- > drivers/media/platform/rcar-vin/rcar-dma.c | 2 +- > drivers/media/platform/rcar-vin/rcar-v4l2.c | 4 ++-- > drivers/media/platform/rockchip/rga/rga-hw.c | 6 +++--- > drivers/media/platform/s3c-camif/camif-core.h | 2 +- > drivers/media/platform/s5p-jpeg/jpeg-core.h | 4 ++-- > drivers/media/platform/s5p-mfc/s5p_mfc_common.h | 2 +- > drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c | 2 +- > drivers/media/platform/s5p-mfc/s5p_mfc_dec.c | 2 +- > drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c | 2 +- > drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c | 4 ++-- > .../media/platform/sti/c8sectpfe/c8sectpfe-core.h | 2 +- > drivers/media/platform/sti/delta/delta.h | 2 +- > drivers/media/platform/sti/hva/hva-h264.c | 2 +- > drivers/media/platform/stm32/stm32-dcmi.c | 2 +- > drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h | 2 +- > drivers/media/platform/ti-vpe/vpdma.c | 14 +++++++------- > drivers/media/platform/ti-vpe/vpe.c | 2 +- > drivers/media/platform/vsp1/vsp1_brx.c | 4 ++-- > drivers/media/platform/xilinx/xilinx-vip.c | 2 +- > 46 files changed, 70 insertions(+), 70 deletions(-) > > diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig > index 6cff26b29a38..4acbed189644 100644 > --- a/drivers/media/platform/Kconfig > +++ b/drivers/media/platform/Kconfig > @@ -668,7 +668,7 @@ menuconfig SDR_PLATFORM_DRIVERS > if SDR_PLATFORM_DRIVERS > > config VIDEO_RCAR_DRIF > - tristate "Renesas Digitial Radio Interface (DRIF)" > + tristate "Renesas Digital Radio Interface (DRIF)" > depends on VIDEO_V4L2 > depends on ARCH_RENESAS || COMPILE_TEST > select VIDEOBUF2_VMALLOC > diff --git a/drivers/media/platform/atmel/atmel-isi.c b/drivers/media/platform/atmel/atmel-isi.c > index fdb255e4a956..08b8d5583080 100644 > --- a/drivers/media/platform/atmel/atmel-isi.c > +++ b/drivers/media/platform/atmel/atmel-isi.c > @@ -110,7 +110,7 @@ struct atmel_isi { > bool enable_preview_path; > > struct completion complete; > - /* ISI peripherial clock */ > + /* ISI peripheral clock */ > struct clk *pclk; > unsigned int irq; > > @@ -1078,7 +1078,7 @@ static void isi_graph_notify_unbind(struct v4l2_async_notifier *notifier, > > dev_dbg(isi->dev, "Removing %s\n", video_device_node_name(isi->vdev)); > > - /* Checks internaly if vdev have been init or not */ > + /* Checks internally if vdev have been init or not */ > video_unregister_device(isi->vdev); > } > > diff --git a/drivers/media/platform/coda/coda-jpeg.c b/drivers/media/platform/coda/coda-jpeg.c > index 9f899a6cefed..39a2351c1e48 100644 > --- a/drivers/media/platform/coda/coda-jpeg.c > +++ b/drivers/media/platform/coda/coda-jpeg.c > @@ -103,7 +103,7 @@ static const unsigned char chroma_ac_value[162 + 2] = { > > /* > * Quantization tables for luminance and chrominance components in > - * zig-zag scan order from the Freescale i.MX VPU libaries > + * zig-zag scan order from the Freescale i.MX VPU libraries > */ > > static unsigned char luma_q[64] = { > diff --git a/drivers/media/platform/davinci/isif.c b/drivers/media/platform/davinci/isif.c > index 340f8218f54d..47cecd10eb9f 100644 > --- a/drivers/media/platform/davinci/isif.c > +++ b/drivers/media/platform/davinci/isif.c > @@ -328,7 +328,7 @@ static void isif_config_bclamp(struct isif_black_clamp *bc) > if (bc->en) { > val = bc->bc_mode_color << ISIF_BC_MODE_COLOR_SHIFT; > > - /* Enable BC and horizontal clamp caculation paramaters */ > + /* Enable BC and horizontal clamp calculation parameters */ > val = val | 1 | (bc->horz.mode << ISIF_HORZ_BC_MODE_SHIFT); > > regw(val, CLAMPCFG); > @@ -358,7 +358,7 @@ static void isif_config_bclamp(struct isif_black_clamp *bc) > regw(bc->horz.win_start_v_calc, CLHWIN2); > } > > - /* vertical clamp caculation paramaters */ > + /* vertical clamp calculation parameters */ > > /* Reset clamp value sel for previous line */ > val |= > diff --git a/drivers/media/platform/davinci/vpbe.c b/drivers/media/platform/davinci/vpbe.c > index 4766a7a23d16..8339163a5231 100644 > --- a/drivers/media/platform/davinci/vpbe.c > +++ b/drivers/media/platform/davinci/vpbe.c > @@ -242,7 +242,7 @@ static int vpbe_set_output(struct vpbe_device *vpbe_dev, int index) > goto unlock; > > /* > - * It is assumed that venc or extenal encoder will set a default > + * It is assumed that venc or external encoder will set a default > * mode in the sub device. For external encoder or LCD pannel output, > * we also need to set up the lcd port for the required mode. So setup > * the lcd port for the default mode that is configured in the board > diff --git a/drivers/media/platform/davinci/vpif.c b/drivers/media/platform/davinci/vpif.c > index 16352e2263d2..df66461f5d4f 100644 > --- a/drivers/media/platform/davinci/vpif.c > +++ b/drivers/media/platform/davinci/vpif.c > @@ -1,7 +1,7 @@ > /* > * vpif - Video Port Interface driver > * VPIF is a receiver and transmitter for video data. It has two channels(0, 1) > - * that receiveing video byte stream and two channels(2, 3) for video output. > + * that receiving video byte stream and two channels(2, 3) for video output. > * The hardware supports SDTV, HDTV formats, raw data capture. > * Currently, the driver supports NTSC and PAL standards. > * > diff --git a/drivers/media/platform/davinci/vpif_display.c b/drivers/media/platform/davinci/vpif_display.c > index 3517487d9760..f4b4f2a1dfc0 100644 > --- a/drivers/media/platform/davinci/vpif_display.c > +++ b/drivers/media/platform/davinci/vpif_display.c > @@ -138,7 +138,7 @@ static int vpif_buffer_queue_setup(struct vb2_queue *vq, > * vpif_buffer_queue : Callback function to add buffer to DMA queue > * @vb: ptr to vb2_buffer > * > - * This callback fucntion queues the buffer to DMA engine > + * This callback function queues the buffer to DMA engine > */ > static void vpif_buffer_queue(struct vb2_buffer *vb) > { > @@ -635,7 +635,7 @@ static int vpif_try_fmt_vid_out(struct file *file, void *priv, > struct v4l2_pix_format *pixfmt = &fmt->fmt.pix; > > /* > - * to supress v4l-compliance warnings silently correct > + * to suppress v4l-compliance warnings silently correct > * the pixelformat > */ > if (pixfmt->pixelformat != V4L2_PIX_FMT_YUV422P) > diff --git a/drivers/media/platform/exynos4-is/fimc-is-command.h b/drivers/media/platform/exynos4-is/fimc-is-command.h > index 0d1f52e394b1..b06b56b890d5 100644 > --- a/drivers/media/platform/exynos4-is/fimc-is-command.h > +++ b/drivers/media/platform/exynos4-is/fimc-is-command.h > @@ -18,7 +18,7 @@ > > #define FIMC_IS_COMMAND_VER 110 /* FIMC-IS command set version 1.10 */ > > -/* Enumeration of commands beetween the FIMC-IS and the host processor. */ > +/* Enumeration of commands between the FIMC-IS and the host processor. */ > > /* HOST to FIMC-IS */ > #define HIC_PREVIEW_STILL 0x0001 > diff --git a/drivers/media/platform/exynos4-is/fimc-is-param.h b/drivers/media/platform/exynos4-is/fimc-is-param.h > index 8e31f7642776..22923a3d405e 100644 > --- a/drivers/media/platform/exynos4-is/fimc-is-param.h > +++ b/drivers/media/platform/exynos4-is/fimc-is-param.h > @@ -298,7 +298,7 @@ enum isp_af_mode { > #define ISP_FLASH_COMMAND_AUTO 2 > #define ISP_FLASH_COMMAND_TORCH 3 /* 3 sec */ > > -/* Flash red-eye commads */ > +/* Flash red-eye commands */ > #define ISP_FLASH_REDEYE_DISABLE 0 > #define ISP_FLASH_REDEYE_ENABLE 1 > > diff --git a/drivers/media/platform/exynos4-is/media-dev.h b/drivers/media/platform/exynos4-is/media-dev.h > index 9f527670395a..a7c9490bbcb4 100644 > --- a/drivers/media/platform/exynos4-is/media-dev.h > +++ b/drivers/media/platform/exynos4-is/media-dev.h > @@ -79,7 +79,7 @@ struct fimc_camclk_info { > > /** > * struct fimc_sensor_info - image data source subdev information > - * @pdata: sensor's atrributes passed as media device's platform data > + * @pdata: sensor's attributes passed as media device's platform data > * @asd: asynchronous subdev registration data structure > * @subdev: image sensor v4l2 subdev > * @host: fimc device the sensor is currently linked to > diff --git a/drivers/media/platform/exynos4-is/mipi-csis.c b/drivers/media/platform/exynos4-is/mipi-csis.c > index 35cb0162085b..234e047e3e8f 100644 > --- a/drivers/media/platform/exynos4-is/mipi-csis.c > +++ b/drivers/media/platform/exynos4-is/mipi-csis.c > @@ -183,7 +183,7 @@ struct csis_drvdata { > * @index: the hardware instance index > * @pdev: CSIS platform device > * @phy: pointer to the CSIS generic PHY > - * @regs: mmaped I/O registers memory > + * @regs: mmapped I/O registers memory > * @supplies: CSIS regulator supplies > * @clock: CSIS clocks > * @irq: requested s5p-mipi-csis irq number > @@ -745,7 +745,7 @@ static int s5pcsis_parse_dt(struct platform_device *pdev, > goto err; > } > > - /* Get MIPI CSI-2 bus configration from the endpoint node. */ > + /* Get MIPI CSI-2 bus configuration from the endpoint node. */ > of_property_read_u32(node, "samsung,csis-hs-settle", > &state->hs_settle); > state->wclk_ext = of_property_read_bool(node, > diff --git a/drivers/media/platform/marvell-ccic/mmp-driver.c b/drivers/media/platform/marvell-ccic/mmp-driver.c > index 70a2833db0d1..af76eb637773 100644 > --- a/drivers/media/platform/marvell-ccic/mmp-driver.c > +++ b/drivers/media/platform/marvell-ccic/mmp-driver.c > @@ -240,8 +240,8 @@ static void mmpcam_calc_dphy(struct mcam_camera *mcam) > * bit 8 ~ bit 15: HS_SETTLE > * Time interval during which the HS > * receiver shall ignore any Data Lane > - * HS transistions. > - * The vaule has been calibrated on > + * HS transitions. > + * The value has been calibrated on > * different boards. It seems to work well. > * > * More detail please refer > diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_core.h b/drivers/media/platform/mtk-mdp/mtk_mdp_core.h > index ad1cff306efd..e5abb1abb3a3 100644 > --- a/drivers/media/platform/mtk-mdp/mtk_mdp_core.h > +++ b/drivers/media/platform/mtk-mdp/mtk_mdp_core.h > @@ -41,7 +41,7 @@ > #define MTK_MDP_CTX_ERROR BIT(5) > > /** > - * struct mtk_mdp_pix_align - alignement of image > + * struct mtk_mdp_pix_align - alignment of image > * @org_w: source alignment of width > * @org_h: source alignment of height > * @target_w: dst alignment of width > @@ -122,8 +122,8 @@ struct mtk_mdp_frame { > /** > * struct mtk_mdp_variant - image processor variant information > * @pix_max: maximum limit of image size > - * @pix_min: minimun limit of image size > - * @pix_align: alignement of image > + * @pix_min: minimum limit of image size > + * @pix_align: alignment of image > * @h_scale_up_max: maximum scale-up in horizontal > * @v_scale_up_max: maximum scale-up in vertical > * @h_scale_down_max: maximum scale-down in horizontal > diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c > index ba619647bc10..794aba685120 100644 > --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c > +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c > @@ -1170,7 +1170,7 @@ static void vb2ops_vdec_buf_queue(struct vb2_buffer *vb) > ret = vdec_if_decode(ctx, &src_mem, NULL, &res_chg); > if (ret || !res_chg) { > /* > - * fb == NULL menas to parse SPS/PPS header or > + * fb == NULL means to parse SPS/PPS header or > * resolution info in src_mem. Decode can fail > * if there is no SPS header or picture info > * in bs > diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h > index 8aba69555b12..e7e2a108def9 100644 > --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h > +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h > @@ -151,9 +151,9 @@ struct mtk_q_data { > * @intra_period: I frame period > * @gop_size: group of picture size, it's used as the intra frame period > * @framerate_num: frame rate numerator. ex: framerate_num=30 and > - * framerate_denom=1 menas FPS is 30 > + * framerate_denom=1 means FPS is 30 > * @framerate_denom: frame rate denominator. ex: framerate_num=30 and > - * framerate_denom=1 menas FPS is 30 > + * framerate_denom=1 means FPS is 30 > * @h264_max_qp: Max value for H.264 quantization parameter > * @h264_profile: V4L2 defined H.264 profile > * @h264_level: V4L2 defined H.264 level > diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c > index d1f12257bf66..2af654240d96 100644 > --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c > +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c > @@ -393,7 +393,7 @@ static void mtk_venc_set_param(struct mtk_vcodec_ctx *ctx, > param->input_yuv_fmt = VENC_YUV_FORMAT_NV21; > break; > default: > - mtk_v4l2_err("Unsupport fourcc =%d", q_data_src->fmt->fourcc); > + mtk_v4l2_err("Unsupported fourcc =%d", q_data_src->fmt->fourcc); > break; > } > param->h264_profile = enc_params->h264_profile; > diff --git a/drivers/media/platform/mtk-vcodec/vdec/vdec_h264_if.c b/drivers/media/platform/mtk-vcodec/vdec/vdec_h264_if.c > index aa3ce41898bc..02c960c63ac0 100644 > --- a/drivers/media/platform/mtk-vcodec/vdec/vdec_h264_if.c > +++ b/drivers/media/platform/mtk-vcodec/vdec/vdec_h264_if.c > @@ -55,7 +55,7 @@ struct h264_fb { > > /** > * struct h264_ring_fb_list - ring frame buffer list > - * @fb_list : frame buffer arrary > + * @fb_list : frame buffer array > * @read_idx : read index > * @write_idx : write index > * @count : buffer count in list > @@ -72,7 +72,7 @@ struct h264_ring_fb_list { > /** > * struct vdec_h264_dec_info - decode information > * @dpb_sz : decoding picture buffer size > - * @resolution_changed : resoltion change happen > + * @resolution_changed : resolution change happen > * @realloc_mv_buf : flag to notify driver to re-allocate mv buffer > * @reserved : for 8 bytes alignment > * @bs_dma : Input bit-stream buffer dma address > diff --git a/drivers/media/platform/mtk-vcodec/vdec/vdec_vp8_if.c b/drivers/media/platform/mtk-vcodec/vdec/vdec_vp8_if.c > index 3e84a761db3a..bac3723038de 100644 > --- a/drivers/media/platform/mtk-vcodec/vdec/vdec_vp8_if.c > +++ b/drivers/media/platform/mtk-vcodec/vdec/vdec_vp8_if.c > @@ -120,7 +120,7 @@ struct vdec_vp8_hw_reg_base { > /** > * struct vdec_vp8_vpu_inst - VPU instance for VP8 decode > * @wq_hd : Wait queue to wait VPU message ack > - * @signaled : 1 - Host has received ack message from VPU, 0 - not recevie > + * @signaled : 1 - Host has received ack message from VPU, 0 - not receive > * @failure : VPU execution result status 0 - success, others - fail > * @inst_addr : VPU decoder instance address > */ > diff --git a/drivers/media/platform/mtk-vcodec/vdec_drv_if.h b/drivers/media/platform/mtk-vcodec/vdec_drv_if.h > index ded1154481cd..9a21591f3818 100644 > --- a/drivers/media/platform/mtk-vcodec/vdec_drv_if.h > +++ b/drivers/media/platform/mtk-vcodec/vdec_drv_if.h > @@ -80,7 +80,7 @@ void vdec_if_deinit(struct mtk_vcodec_ctx *ctx); > * vdec_if_decode() - trigger decode > * @ctx : [in] v4l2 context > * @bs : [in] input bitstream > - * @fb : [in] frame buffer to store decoded frame, when null menas parse > + * @fb : [in] frame buffer to store decoded frame, when null means parse > * header only > * @res_chg : [out] resolution change happens if current bs have different > * picture width/height > diff --git a/drivers/media/platform/mtk-vcodec/vdec_vpu_if.h b/drivers/media/platform/mtk-vcodec/vdec_vpu_if.h > index cd37bb2a610f..79d8eac7f5e2 100644 > --- a/drivers/media/platform/mtk-vcodec/vdec_vpu_if.h > +++ b/drivers/media/platform/mtk-vcodec/vdec_vpu_if.h > @@ -62,7 +62,7 @@ int vpu_dec_start(struct vdec_vpu_inst *vpu, uint32_t *data, unsigned int len); > /** > * vpu_dec_end - end decoding, basically the function will be invoked once > * when HW decoding done interrupt received successfully. The > - * decoder in VPU will continute to do referene frame management > + * decoder in VPU will continue to do reference frame management > * and check if there is a new decoded frame available to display. > * > * @vpu : instance for vdec_vpu_inst > diff --git a/drivers/media/platform/omap/omap_vout.c b/drivers/media/platform/omap/omap_vout.c > index ff3de2dce5a2..37f0d7146dfa 100644 > --- a/drivers/media/platform/omap/omap_vout.c > +++ b/drivers/media/platform/omap/omap_vout.c > @@ -1129,7 +1129,7 @@ static int vidioc_s_fmt_vid_out(struct file *file, void *fh, > } > timing = &dssdev->panel.timings; > > - /* We dont support RGB24-packed mode if vrfb rotation > + /* We don't support RGB24-packed mode if vrfb rotation > * is enabled*/ > if ((is_rotation_enabled(vout)) && > f->fmt.pix.pixelformat == V4L2_PIX_FMT_RGB24) { > @@ -1147,7 +1147,7 @@ static int vidioc_s_fmt_vid_out(struct file *file, void *fh, > vout->fbuf.fmt.width = timing->x_res; > } > > - /* change to samller size is OK */ > + /* change to smaller size is OK */ > > bpp = omap_vout_try_format(&f->fmt.pix); > f->fmt.pix.sizeimage = f->fmt.pix.width * f->fmt.pix.height * bpp; > diff --git a/drivers/media/platform/omap/omap_voutdef.h b/drivers/media/platform/omap/omap_voutdef.h > index 56b630b1c8b4..c740393c8509 100644 > --- a/drivers/media/platform/omap/omap_voutdef.h > +++ b/drivers/media/platform/omap/omap_voutdef.h > @@ -37,7 +37,7 @@ > #define VID_MAX_WIDTH 1280 /* Largest width */ > #define VID_MAX_HEIGHT 720 /* Largest height */ > > -/* Mimimum requirement is 2x2 for DSS */ > +/* Minimum requirement is 2x2 for DSS */ > #define VID_MIN_WIDTH 2 > #define VID_MIN_HEIGHT 2 > > @@ -135,7 +135,7 @@ struct omap_vout_device { > enum omap_color_mode dss_mode; > > /* we don't allow to request new buffer when old buffers are > - * still mmaped > + * still mmapped > */ > int mmap_count; > > diff --git a/drivers/media/platform/omap3isp/isp.c b/drivers/media/platform/omap3isp/isp.c > index 13f2828d880d..bd57174d81a7 100644 > --- a/drivers/media/platform/omap3isp/isp.c > +++ b/drivers/media/platform/omap3isp/isp.c > @@ -1517,7 +1517,7 @@ void omap3isp_print_status(struct isp_device *isp) > * > * To solve this problem power management support is split into prepare/complete > * and suspend/resume operations. The pipelines are stopped in prepare() and the > - * ISP clocks get disabled in suspend(). Similarly, the clocks are reenabled in > + * ISP clocks get disabled in suspend(). Similarly, the clocks are re-enabled in > * resume(), and the the pipelines are restarted in complete(). > * > * TODO: PM dependencies between the ISP and sensors are not modelled explicitly > diff --git a/drivers/media/platform/omap3isp/ispccdc.c b/drivers/media/platform/omap3isp/ispccdc.c > index 14a1c24037c4..261ad1175f98 100644 > --- a/drivers/media/platform/omap3isp/ispccdc.c > +++ b/drivers/media/platform/omap3isp/ispccdc.c > @@ -1594,7 +1594,7 @@ static int ccdc_isr_buffer(struct isp_ccdc_device *ccdc) > return 0; > > /* We're in continuous mode, and memory writes were disabled due to a > - * buffer underrun. Reenable them now that we have a buffer. The buffer > + * buffer underrun. Re-enable them now that we have a buffer. The buffer > * address has been set in ccdc_video_queue. > */ > if (ccdc->state == ISP_PIPELINE_STREAM_CONTINUOUS && ccdc->underrun) { > @@ -1712,7 +1712,7 @@ static void ccdc_vd1_isr(struct isp_ccdc_device *ccdc) > * data to memory the CCDC and LSC are stopped immediately but > * without change the CCDC stopping state machine. The CCDC > * stopping state machine should be used only when user request > - * for stopping is received (SINGLESHOT is an exeption). > + * for stopping is received (SINGLESHOT is an exception). > */ > switch (ccdc->state) { > case ISP_PIPELINE_STREAM_SINGLESHOT: > diff --git a/drivers/media/platform/omap3isp/ispcsi2.c b/drivers/media/platform/omap3isp/ispcsi2.c > index 9c180f607bcb..da66ea65be5d 100644 > --- a/drivers/media/platform/omap3isp/ispcsi2.c > +++ b/drivers/media/platform/omap3isp/ispcsi2.c > @@ -710,7 +710,7 @@ static void csi2_isr_ctx(struct isp_csi2_device *csi2, > > /* Skip interrupts until we reach the frame skip count. The CSI2 will be > * automatically disabled, as the frame skip count has been programmed > - * in the CSI2_CTx_CTRL1::COUNT field, so reenable it. > + * in the CSI2_CTx_CTRL1::COUNT field, so re-enable it. > * > * It would have been nice to rely on the FRAME_NUMBER interrupt instead > * but it turned out that the interrupt is only generated when the CSI2 > diff --git a/drivers/media/platform/pxa_camera.c b/drivers/media/platform/pxa_camera.c > index 3cf3c6390cc8..4fe228752a43 100644 > --- a/drivers/media/platform/pxa_camera.c > +++ b/drivers/media/platform/pxa_camera.c > @@ -1631,7 +1631,7 @@ static int pxa_camera_set_bus_param(struct pxa_camera_dev *pcdev) > > pcdev->channels = 1; > > - /* Make choises, based on platform preferences */ > + /* Make choices, based on platform preferences */ > if ((common_flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH) && > (common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)) { > if (pcdev->platform_flags & PXA_CAMERA_HSP) > diff --git a/drivers/media/platform/qcom/venus/core.h b/drivers/media/platform/qcom/venus/core.h > index 79c7e816c706..7a3feb5cee00 100644 > --- a/drivers/media/platform/qcom/venus/core.h > +++ b/drivers/media/platform/qcom/venus/core.h > @@ -219,7 +219,7 @@ struct venus_buffer { > #define to_venus_buffer(ptr) container_of(ptr, struct venus_buffer, vb) > > /** > - * struct venus_inst - holds per instance paramerters > + * struct venus_inst - holds per instance parameters > * > * @list: used for attach an instance to the core > * @lock: instance lock > diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c > index beb9248992a4..2207a31d355e 100644 > --- a/drivers/media/platform/rcar-vin/rcar-dma.c > +++ b/drivers/media/platform/rcar-vin/rcar-dma.c > @@ -681,7 +681,7 @@ static int rvin_setup(struct rvin_dev *vin) > break; > } > > - /* Enable VSYNC Field Toogle mode after one VSYNC input */ > + /* Enable VSYNC Field Toggle mode after one VSYNC input */ > if (vin->info->model == RCAR_GEN3) > dmr2 = VNDMR2_FTEV; > else > diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c > index 7a2851790b91..7cbdcbf9b090 100644 > --- a/drivers/media/platform/rcar-vin/rcar-v4l2.c > +++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c > @@ -665,7 +665,7 @@ static void rvin_mc_try_format(struct rvin_dev *vin, > * The V4L2 specification clearly documents the colorspace fields > * as being set by drivers for capture devices. Using the values > * supplied by userspace thus wouldn't comply with the API. Until > - * the API is updated force fixed vaules. > + * the API is updated force fixed values. > */ > pix->colorspace = RVIN_DEFAULT_COLORSPACE; > pix->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(pix->colorspace); > @@ -964,7 +964,7 @@ void rvin_v4l2_unregister(struct rvin_dev *vin) > v4l2_info(&vin->v4l2_dev, "Removing %s\n", > video_device_node_name(&vin->vdev)); > > - /* Checks internaly if vdev have been init or not */ > + /* Checks internally if vdev have been init or not */ > video_unregister_device(&vin->vdev); > } > > diff --git a/drivers/media/platform/rockchip/rga/rga-hw.c b/drivers/media/platform/rockchip/rga/rga-hw.c > index 96d1b1b3fe8e..843e50d17a72 100644 > --- a/drivers/media/platform/rockchip/rga/rga-hw.c > +++ b/drivers/media/platform/rockchip/rga/rga-hw.c > @@ -256,7 +256,7 @@ static void rga_cmd_set_trans_info(struct rga_ctx *ctx) > } > > /* > - * Cacluate the up/down scaling mode/factor. > + * Calculate the up/down scaling mode/factor. > * > * RGA used to scale the picture first, and then rotate second, > * so we need to swap the w/h when rotate degree is 90/270. > @@ -304,7 +304,7 @@ static void rga_cmd_set_trans_info(struct rga_ctx *ctx) > } > > /* > - * Cacluate the framebuffer virtual strides and active size, > + * Calculate the framebuffer virtual strides and active size, > * note that the step of vir_stride / vir_width is 4 byte words > */ > src_vir_info.data.vir_stride = ctx->in.stride >> 2; > @@ -318,7 +318,7 @@ static void rga_cmd_set_trans_info(struct rga_ctx *ctx) > dst_act_info.data.act_width = dst_w - 1; > > /* > - * Cacluate the source framebuffer base address with offset pixel. > + * Calculate the source framebuffer base address with offset pixel. > */ > src_offsets = rga_get_addr_offset(&ctx->in, src_x, src_y, > src_w, src_h); > diff --git a/drivers/media/platform/s3c-camif/camif-core.h b/drivers/media/platform/s3c-camif/camif-core.h > index 1f5c8c94ce89..be5e7357dffc 100644 > --- a/drivers/media/platform/s3c-camif/camif-core.h > +++ b/drivers/media/platform/s3c-camif/camif-core.h > @@ -260,7 +260,7 @@ struct camif_vp { > * @clock: clocks required for the CAMIF operation > * @lock: mutex protecting this data structure > * @slock: spinlock protecting CAMIF registers > - * @io_base: start address of the mmaped CAMIF registers > + * @io_base: start address of the mmapped CAMIF registers > */ > struct camif_dev { > struct media_device media_dev; > diff --git a/drivers/media/platform/s5p-jpeg/jpeg-core.h b/drivers/media/platform/s5p-jpeg/jpeg-core.h > index 90fda4b720eb..144c102ff05f 100644 > --- a/drivers/media/platform/s5p-jpeg/jpeg-core.h > +++ b/drivers/media/platform/s5p-jpeg/jpeg-core.h > @@ -153,7 +153,7 @@ struct s5p_jpeg_variant { > > /** > * struct jpeg_fmt - driver's internal color format data > - * @name: format descritpion > + * @name: format description > * @fourcc: the fourcc code, 0 if not applicable > * @depth: number of bits per pixel > * @colplanes: number of color planes (1 for packed formats) > @@ -193,7 +193,7 @@ struct s5p_jpeg_marker { > * @sos: SOS marker's position relative to the buffer beginning > * @dht: DHT markers' positions relative to the buffer beginning > * @dqt: DQT markers' positions relative to the buffer beginning > - * @sof: SOF0 marker's postition relative to the buffer beginning > + * @sof: SOF0 marker's position relative to the buffer beginning > * @sof_len: SOF0 marker's payload length (without length field itself) > * @components: number of image components > * @size: image buffer size in bytes > diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h > index 20442a9b9f7a..24148020baa9 100644 > --- a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h > +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h > @@ -268,7 +268,7 @@ struct s5p_mfc_priv_buf { > * @enc_ctrl_handler: control framework handler for encoding > * @pm: power management control > * @variant: MFC hardware variant information > - * @num_inst: couter of active MFC instances > + * @num_inst: counter of active MFC instances > * @irqlock: lock for operations on videobuf2 queues > * @condlock: lock for changing/checking if a context is ready to be > * processed > diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c > index ee7b15b335e0..9f832ba7bc8c 100644 > --- a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c > +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c > @@ -51,7 +51,7 @@ int s5p_mfc_load_firmware(struct s5p_mfc_dev *dev) > struct firmware *fw_blob; > int i, err = -EINVAL; > > - /* Firmare has to be present as a separate file or compiled > + /* Firmware has to be present as a separate file or compiled > * into kernel. */ > mfc_debug_enter(); > > diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c > index f4c0e3a8f27d..e111f9c47179 100644 > --- a/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c > +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c > @@ -602,7 +602,7 @@ static int vidioc_querybuf(struct file *file, void *priv, > int i; > > if (buf->memory != V4L2_MEMORY_MMAP) { > - mfc_err("Only mmaped buffers can be used\n"); > + mfc_err("Only mmapped buffers can be used\n"); > return -EINVAL; > } > mfc_debug(2, "State: %d, buf->type: %d\n", ctx->state, buf->type); > diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c > index 0913881219ff..6144e95f6425 100644 > --- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c > +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c > @@ -1293,7 +1293,7 @@ static int s5p_mfc_run_init_dec_buffers(struct s5p_mfc_ctx *ctx) > * First set the output frame buffers > */ > if (ctx->capture_state != QUEUE_BUFS_MMAPED) { > - mfc_err("It seems that not all destination buffers were mmaped\nMFC requires that all destination are mmaped before starting processing\n"); > + mfc_err("It seems that not all destination buffers were mmapped\nMFC requires that all destination are mmapped before starting processing\n"); > return -EAGAIN; > } > if (list_empty(&ctx->src_queue)) { > diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c > index 7c629be43205..281699ab7fe1 100644 > --- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c > +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c > @@ -53,7 +53,7 @@ static int s5p_mfc_alloc_dec_temp_buffers_v6(struct s5p_mfc_ctx *ctx) > return 0; > } > > -/* Release temproary buffers for decoding */ > +/* Release temporary buffers for decoding */ > static void s5p_mfc_release_dec_desc_buffer_v6(struct s5p_mfc_ctx *ctx) > { > /* NOP */ > @@ -1928,7 +1928,7 @@ static inline int s5p_mfc_run_init_dec_buffers(struct s5p_mfc_ctx *ctx) > > if (ctx->capture_state != QUEUE_BUFS_MMAPED) { > mfc_err("It seems that not all destination buffers were\n" > - "mmaped.MFC requires that all destination are mmaped\n" > + "mmapped.MFC requires that all destination are mmapped\n" > "before starting processing.\n"); > return -EAGAIN; > } > diff --git a/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.h b/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.h > index 3dbb3a287cc0..c9d6021904cd 100644 > --- a/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.h > +++ b/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.h > @@ -193,7 +193,7 @@ struct c8sectpfei { > #define C8SECTPFE_SYS_ENABLE BIT(0) > > /* > - * Ponter record data structure required for each input block > + * Pointer record data structure required for each input block > * see Table 82 on page 167 of functional specification. > */ > > diff --git a/drivers/media/platform/sti/delta/delta.h b/drivers/media/platform/sti/delta/delta.h > index 2ba99922c05b..914556030e70 100644 > --- a/drivers/media/platform/sti/delta/delta.h > +++ b/drivers/media/platform/sti/delta/delta.h > @@ -286,7 +286,7 @@ struct delta_dec { > * Header parsing must be done using decode(), giving > * explicitly header access unit or first access unit of bitstream. > * If no valid header is found, get_streaminfo will return -ENODATA, > - * in this case the next bistream access unit must be decoded till > + * in this case the next bitstream access unit must be decoded till > * get_streaminfo becomes successful. > */ > int (*get_streaminfo)(struct delta_ctx *ctx, > diff --git a/drivers/media/platform/sti/hva/hva-h264.c b/drivers/media/platform/sti/hva/hva-h264.c > index b61a5d337d2a..c34f7cf5aed2 100644 > --- a/drivers/media/platform/sti/hva/hva-h264.c > +++ b/drivers/media/platform/sti/hva/hva-h264.c > @@ -626,7 +626,7 @@ static int hva_h264_prepare_task(struct hva_ctx *pctx, > td->frame_width = frame_width; > td->frame_height = frame_height; > > - /* set frame alignement */ > + /* set frame alignment */ > td->window_width = frame_width; > td->window_height = frame_height; > td->window_horizontal_offset = 0; > diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c > index 6732874114cf..5fe5b38fa901 100644 > --- a/drivers/media/platform/stm32/stm32-dcmi.c > +++ b/drivers/media/platform/stm32/stm32-dcmi.c > @@ -1544,7 +1544,7 @@ static void dcmi_graph_notify_unbind(struct v4l2_async_notifier *notifier, > > dev_dbg(dcmi->dev, "Removing %s\n", video_device_node_name(dcmi->vdev)); > > - /* Checks internaly if vdev has been init or not */ > + /* Checks internally if vdev has been init or not */ > video_unregister_device(dcmi->vdev); > } > > diff --git a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h > index 0bb000712c33..85f97d4f086e 100644 > --- a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h > +++ b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h > @@ -65,7 +65,7 @@ bool sun6i_csi_is_format_supported(struct sun6i_csi *csi, u32 pixformat, > int sun6i_csi_set_power(struct sun6i_csi *csi, bool enable); > > /** > - * sun6i_csi_update_config() - update the csi register setttings > + * sun6i_csi_update_config() - update the csi register settings > * @csi: pointer to the csi > * @config: see struct sun6i_csi_config > */ > diff --git a/drivers/media/platform/ti-vpe/vpdma.c b/drivers/media/platform/ti-vpe/vpdma.c > index e2cf2b90e500..1da2cb3aaf0c 100644 > --- a/drivers/media/platform/ti-vpe/vpdma.c > +++ b/drivers/media/platform/ti-vpe/vpdma.c > @@ -404,7 +404,7 @@ EXPORT_SYMBOL(vpdma_map_desc_buf); > > /* > * unmap descriptor/payload DMA buffer, disabling DMA access and > - * allowing the main processor to acces the data > + * allowing the main processor to access the data > */ > void vpdma_unmap_desc_buf(struct vpdma_data *vpdma, struct vpdma_buf *buf) > { > @@ -501,7 +501,7 @@ void vpdma_reset_desc_list(struct vpdma_desc_list *list) > EXPORT_SYMBOL(vpdma_reset_desc_list); > > /* > - * free the buffer allocated fot the VPDMA descriptor list, this should be > + * free the buffer allocated for the VPDMA descriptor list, this should be > * called when the user doesn't want to use VPDMA any more. > */ > void vpdma_free_desc_list(struct vpdma_desc_list *list) > @@ -790,7 +790,7 @@ static void dump_dtd(struct vpdma_dtd *dtd) > * append an outbound data transfer descriptor to the given descriptor list, > * this sets up a 'client to memory' VPDMA transfer for the given VPDMA channel > * > - * @list: vpdma desc list to which we add this decriptor > + * @list: vpdma desc list to which we add this descriptor > * @width: width of the image in pixels in memory > * @c_rect: compose params of output image > * @fmt: vpdma data format of the buffer > @@ -798,7 +798,7 @@ static void dump_dtd(struct vpdma_dtd *dtd) > * max_width: enum for maximum width of data transfer > * max_height: enum for maximum height of data transfer > * chan: VPDMA channel > - * flags: VPDMA flags to configure some descriptor fileds > + * flags: VPDMA flags to configure some descriptor fields > */ > void vpdma_add_out_dtd(struct vpdma_desc_list *list, int width, > int stride, const struct v4l2_rect *c_rect, > @@ -863,14 +863,14 @@ EXPORT_SYMBOL(vpdma_rawchan_add_out_dtd); > * append an inbound data transfer descriptor to the given descriptor list, > * this sets up a 'memory to client' VPDMA transfer for the given VPDMA channel > * > - * @list: vpdma desc list to which we add this decriptor > + * @list: vpdma desc list to which we add this descriptor > * @width: width of the image in pixels in memory(not the cropped width) > * @c_rect: crop params of input image > * @fmt: vpdma data format of the buffer > * dma_addr: dma address as seen by VPDMA > * chan: VPDMA channel > * field: top or bottom field info of the input image > - * flags: VPDMA flags to configure some descriptor fileds > + * flags: VPDMA flags to configure some descriptor fields > * frame_width/height: the complete width/height of the image presented to the > * client (this makes sense when multiple channels are > * connected to the same client, forming a larger frame) > @@ -1008,7 +1008,7 @@ unsigned int vpdma_get_list_mask(struct vpdma_data *vpdma, int irq_num) > } > EXPORT_SYMBOL(vpdma_get_list_mask); > > -/* clear previosuly occured list intterupts in the LIST_STAT register */ > +/* clear previously occurred list interupts in the LIST_STAT register */ > void vpdma_clear_list_stat(struct vpdma_data *vpdma, int irq_num, > int list_num) > { > diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c > index d70871d0ad2d..207e7e76c048 100644 > --- a/drivers/media/platform/ti-vpe/vpe.c > +++ b/drivers/media/platform/ti-vpe/vpe.c > @@ -876,7 +876,7 @@ static int set_srcdst_params(struct vpe_ctx *ctx) > /* > * we make sure that the source image has a 16 byte aligned > * stride, we need to do the same for the motion vector buffer > - * by aligning it's stride to the next 16 byte boundry. this > + * by aligning it's stride to the next 16 byte boundary. this > * extra space will not be used by the de-interlacer, but will > * ensure that vpdma operates correctly > */ > diff --git a/drivers/media/platform/vsp1/vsp1_brx.c b/drivers/media/platform/vsp1/vsp1_brx.c > index 5e50178b057d..58ad248cd7f7 100644 > --- a/drivers/media/platform/vsp1/vsp1_brx.c > +++ b/drivers/media/platform/vsp1/vsp1_brx.c > @@ -296,7 +296,7 @@ static void brx_configure_stream(struct vsp1_entity *entity, > /* > * The hardware is extremely flexible but we have no userspace API to > * expose all the parameters, nor is it clear whether we would have use > - * cases for all the supported modes. Let's just harcode the parameters > + * cases for all the supported modes. Let's just hardcode the parameters > * to sane default values for now. > */ > > @@ -373,7 +373,7 @@ static void brx_configure_stream(struct vsp1_entity *entity, > vsp1_brx_write(brx, dlb, VI6_BRU_CTRL(i), ctrl); > > /* > - * Harcode the blending formula to > + * Hardcode the blending formula to > * > * DSTc = DSTc * (1 - SRCa) + SRCc * SRCa > * DSTa = DSTa * (1 - SRCa) + SRCa > diff --git a/drivers/media/platform/xilinx/xilinx-vip.c b/drivers/media/platform/xilinx/xilinx-vip.c > index 18f98838111b..08a825c3a3f6 100644 > --- a/drivers/media/platform/xilinx/xilinx-vip.c > +++ b/drivers/media/platform/xilinx/xilinx-vip.c > @@ -166,7 +166,7 @@ EXPORT_SYMBOL_GPL(xvip_set_format_size); > * the register, otherwise the bitmask is cleared from the register > * when the flag @set is false. > * > - * Fox eample, this function can be used to set a control with a boolean value > + * Fox example, this function can be used to set a control with a boolean value > * requested by users. If the caller knows whether to set or clear in the first > * place, the caller should call xvip_clr() or xvip_set() directly instead of > * using this function. >
Hi again, W dniu 19.02.2019 o 13:17, Andrzej Pietrasiewicz pisze: > Hi Mauro, > > > W dniu 18.02.2019 o 20:29, Mauro Carvalho Chehab pisze: >> Use codespell to fix lots of typos over frontends. >> >> Manually verified to avoid false-positives. >> >> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> > I meant > for drivers/media/platform/sp5-jpeg.c: for drivers/media/platform/sp5-jpeg/* Acked-by: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com> > >> --- >>  drivers/media/platform/Kconfig                    | 2 +- >>  drivers/media/platform/atmel/atmel-isi.c          | 4 ++-- >>  drivers/media/platform/coda/coda-jpeg.c           | 2 +- >>  drivers/media/platform/davinci/isif.c             | 4 ++-- >>  drivers/media/platform/davinci/vpbe.c             | 2 +- >>  drivers/media/platform/davinci/vpif.c             | 2 +- >>  drivers/media/platform/davinci/vpif_display.c     | 4 ++-- >>  .../media/platform/exynos4-is/fimc-is-command.h   | 2 +- >>  drivers/media/platform/exynos4-is/fimc-is-param.h | 2 +- >>  drivers/media/platform/exynos4-is/media-dev.h     | 2 +- >>  drivers/media/platform/exynos4-is/mipi-csis.c     | 4 ++-- >>  drivers/media/platform/marvell-ccic/mmp-driver.c  | 4 ++-- >>  drivers/media/platform/mtk-mdp/mtk_mdp_core.h     | 6 +++--- >>  drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c | 2 +- >>  drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h | 4 ++-- >>  drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c | 2 +- >>  .../media/platform/mtk-vcodec/vdec/vdec_h264_if.c | 4 ++-- >>  .../media/platform/mtk-vcodec/vdec/vdec_vp8_if.c  | 2 +- >>  drivers/media/platform/mtk-vcodec/vdec_drv_if.h   | 2 +- >>  drivers/media/platform/mtk-vcodec/vdec_vpu_if.h   | 2 +- >>  drivers/media/platform/omap/omap_vout.c           | 4 ++-- >>  drivers/media/platform/omap/omap_voutdef.h        | 4 ++-- >>  drivers/media/platform/omap3isp/isp.c             | 2 +- >>  drivers/media/platform/omap3isp/ispccdc.c         | 4 ++-- >>  drivers/media/platform/omap3isp/ispcsi2.c         | 2 +- >>  drivers/media/platform/pxa_camera.c               | 2 +- >>  drivers/media/platform/qcom/venus/core.h          | 2 +- >>  drivers/media/platform/rcar-vin/rcar-dma.c        | 2 +- >>  drivers/media/platform/rcar-vin/rcar-v4l2.c       | 4 ++-- >>  drivers/media/platform/rockchip/rga/rga-hw.c      | 6 +++--- >>  drivers/media/platform/s3c-camif/camif-core.h     | 2 +- >>  drivers/media/platform/s5p-jpeg/jpeg-core.h       | 4 ++-- >>  drivers/media/platform/s5p-mfc/s5p_mfc_common.h   | 2 +- >>  drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c     | 2 +- >>  drivers/media/platform/s5p-mfc/s5p_mfc_dec.c      | 2 +- >>  drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c   | 2 +- >>  drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c   | 4 ++-- >>  .../media/platform/sti/c8sectpfe/c8sectpfe-core.h | 2 +- >>  drivers/media/platform/sti/delta/delta.h          | 2 +- >>  drivers/media/platform/sti/hva/hva-h264.c         | 2 +- >>  drivers/media/platform/stm32/stm32-dcmi.c         | 2 +- >>  drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h | 2 +- >>  drivers/media/platform/ti-vpe/vpdma.c             | 14 +++++++------- >>  drivers/media/platform/ti-vpe/vpe.c               | 2 +- >>  drivers/media/platform/vsp1/vsp1_brx.c            | 4 ++-- >>  drivers/media/platform/xilinx/xilinx-vip.c        | 2 +- >>  46 files changed, 70 insertions(+), 70 deletions(-) >> >> diff --git a/drivers/media/platform/Kconfig >> b/drivers/media/platform/Kconfig >> index 6cff26b29a38..4acbed189644 100644 >> --- a/drivers/media/platform/Kconfig >> +++ b/drivers/media/platform/Kconfig >> @@ -668,7 +668,7 @@ menuconfig SDR_PLATFORM_DRIVERS >>  if SDR_PLATFORM_DRIVERS >>  config VIDEO_RCAR_DRIF >> -   tristate "Renesas Digitial Radio Interface (DRIF)" >> +   tristate "Renesas Digital Radio Interface (DRIF)" >>      depends on VIDEO_V4L2 >>      depends on ARCH_RENESAS || COMPILE_TEST >>      select VIDEOBUF2_VMALLOC >> diff --git a/drivers/media/platform/atmel/atmel-isi.c >> b/drivers/media/platform/atmel/atmel-isi.c >> index fdb255e4a956..08b8d5583080 100644 >> --- a/drivers/media/platform/atmel/atmel-isi.c >> +++ b/drivers/media/platform/atmel/atmel-isi.c >> @@ -110,7 +110,7 @@ struct atmel_isi { >>      bool               enable_preview_path; >>      struct completion       complete; >> -   /* ISI peripherial clock */ >> +   /* ISI peripheral clock */ >>      struct clk           *pclk; >>      unsigned int           irq; >> @@ -1078,7 +1078,7 @@ static void isi_graph_notify_unbind(struct >> v4l2_async_notifier *notifier, >>      dev_dbg(isi->dev, "Removing %s\n", >> video_device_node_name(isi->vdev)); >> -   /* Checks internaly if vdev have been init or not */ >> +   /* Checks internally if vdev have been init or not */ >>      video_unregister_device(isi->vdev); >>  } >> diff --git a/drivers/media/platform/coda/coda-jpeg.c >> b/drivers/media/platform/coda/coda-jpeg.c >> index 9f899a6cefed..39a2351c1e48 100644 >> --- a/drivers/media/platform/coda/coda-jpeg.c >> +++ b/drivers/media/platform/coda/coda-jpeg.c >> @@ -103,7 +103,7 @@ static const unsigned char chroma_ac_value[162 + >> 2] = { >>  /* >>   * Quantization tables for luminance and chrominance components in >> - * zig-zag scan order from the Freescale i.MX VPU libaries >> + * zig-zag scan order from the Freescale i.MX VPU libraries >>   */ >>  static unsigned char luma_q[64] = { >> diff --git a/drivers/media/platform/davinci/isif.c >> b/drivers/media/platform/davinci/isif.c >> index 340f8218f54d..47cecd10eb9f 100644 >> --- a/drivers/media/platform/davinci/isif.c >> +++ b/drivers/media/platform/davinci/isif.c >> @@ -328,7 +328,7 @@ static void isif_config_bclamp(struct >> isif_black_clamp *bc) >>      if (bc->en) { >>          val = bc->bc_mode_color << ISIF_BC_MODE_COLOR_SHIFT; >> -       /* Enable BC and horizontal clamp caculation paramaters */ >> +       /* Enable BC and horizontal clamp calculation parameters */ >>          val = val | 1 | (bc->horz.mode << ISIF_HORZ_BC_MODE_SHIFT); >>          regw(val, CLAMPCFG); >> @@ -358,7 +358,7 @@ static void isif_config_bclamp(struct >> isif_black_clamp *bc) >>              regw(bc->horz.win_start_v_calc, CLHWIN2); >>          } >> -       /* vertical clamp caculation paramaters */ >> +       /* vertical clamp calculation parameters */ >>          /* Reset clamp value sel for previous line */ >>          val |= >> diff --git a/drivers/media/platform/davinci/vpbe.c >> b/drivers/media/platform/davinci/vpbe.c >> index 4766a7a23d16..8339163a5231 100644 >> --- a/drivers/media/platform/davinci/vpbe.c >> +++ b/drivers/media/platform/davinci/vpbe.c >> @@ -242,7 +242,7 @@ static int vpbe_set_output(struct vpbe_device >> *vpbe_dev, int index) >>          goto unlock; >>      /* >> -    * It is assumed that venc or extenal encoder will set a default >> +    * It is assumed that venc or external encoder will set a default >>       * mode in the sub device. For external encoder or LCD pannel >> output, >>       * we also need to set up the lcd port for the required mode. So >> setup >>       * the lcd port for the default mode that is configured in the >> board >> diff --git a/drivers/media/platform/davinci/vpif.c >> b/drivers/media/platform/davinci/vpif.c >> index 16352e2263d2..df66461f5d4f 100644 >> --- a/drivers/media/platform/davinci/vpif.c >> +++ b/drivers/media/platform/davinci/vpif.c >> @@ -1,7 +1,7 @@ >>  /* >>   * vpif - Video Port Interface driver >>   * VPIF is a receiver and transmitter for video data. It has two >> channels(0, 1) >> - * that receiveing video byte stream and two channels(2, 3) for video >> output. >> + * that receiving video byte stream and two channels(2, 3) for video >> output. >>   * The hardware supports SDTV, HDTV formats, raw data capture. >>   * Currently, the driver supports NTSC and PAL standards. >>   * >> diff --git a/drivers/media/platform/davinci/vpif_display.c >> b/drivers/media/platform/davinci/vpif_display.c >> index 3517487d9760..f4b4f2a1dfc0 100644 >> --- a/drivers/media/platform/davinci/vpif_display.c >> +++ b/drivers/media/platform/davinci/vpif_display.c >> @@ -138,7 +138,7 @@ static int vpif_buffer_queue_setup(struct >> vb2_queue *vq, >>   * vpif_buffer_queue : Callback function to add buffer to DMA queue >>   * @vb: ptr to vb2_buffer >>   * >> - * This callback fucntion queues the buffer to DMA engine >> + * This callback function queues the buffer to DMA engine >>   */ >>  static void vpif_buffer_queue(struct vb2_buffer *vb) >>  { >> @@ -635,7 +635,7 @@ static int vpif_try_fmt_vid_out(struct file *file, >> void *priv, >>      struct v4l2_pix_format *pixfmt = &fmt->fmt.pix; >>      /* >> -    * to supress v4l-compliance warnings silently correct >> +    * to suppress v4l-compliance warnings silently correct >>       * the pixelformat >>       */ >>      if (pixfmt->pixelformat != V4L2_PIX_FMT_YUV422P) >> diff --git a/drivers/media/platform/exynos4-is/fimc-is-command.h >> b/drivers/media/platform/exynos4-is/fimc-is-command.h >> index 0d1f52e394b1..b06b56b890d5 100644 >> --- a/drivers/media/platform/exynos4-is/fimc-is-command.h >> +++ b/drivers/media/platform/exynos4-is/fimc-is-command.h >> @@ -18,7 +18,7 @@ >>  #define FIMC_IS_COMMAND_VER   110 /* FIMC-IS command set version >> 1.10 */ >> -/* Enumeration of commands beetween the FIMC-IS and the host >> processor. */ >> +/* Enumeration of commands between the FIMC-IS and the host >> processor. */ >>  /* HOST to FIMC-IS */ >>  #define HIC_PREVIEW_STILL   0x0001 >> diff --git a/drivers/media/platform/exynos4-is/fimc-is-param.h >> b/drivers/media/platform/exynos4-is/fimc-is-param.h >> index 8e31f7642776..22923a3d405e 100644 >> --- a/drivers/media/platform/exynos4-is/fimc-is-param.h >> +++ b/drivers/media/platform/exynos4-is/fimc-is-param.h >> @@ -298,7 +298,7 @@ enum isp_af_mode { >>  #define ISP_FLASH_COMMAND_AUTO           2 >>  #define ISP_FLASH_COMMAND_TORCH           3 /* 3 sec */ >> -/* Flash red-eye commads */ >> +/* Flash red-eye commands */ >>  #define ISP_FLASH_REDEYE_DISABLE       0 >>  #define ISP_FLASH_REDEYE_ENABLE           1 >> diff --git a/drivers/media/platform/exynos4-is/media-dev.h >> b/drivers/media/platform/exynos4-is/media-dev.h >> index 9f527670395a..a7c9490bbcb4 100644 >> --- a/drivers/media/platform/exynos4-is/media-dev.h >> +++ b/drivers/media/platform/exynos4-is/media-dev.h >> @@ -79,7 +79,7 @@ struct fimc_camclk_info { >>  /** >>   * struct fimc_sensor_info - image data source subdev information >> - * @pdata: sensor's atrributes passed as media device's platform data >> + * @pdata: sensor's attributes passed as media device's platform data >>   * @asd: asynchronous subdev registration data structure >>   * @subdev: image sensor v4l2 subdev >>   * @host: fimc device the sensor is currently linked to >> diff --git a/drivers/media/platform/exynos4-is/mipi-csis.c >> b/drivers/media/platform/exynos4-is/mipi-csis.c >> index 35cb0162085b..234e047e3e8f 100644 >> --- a/drivers/media/platform/exynos4-is/mipi-csis.c >> +++ b/drivers/media/platform/exynos4-is/mipi-csis.c >> @@ -183,7 +183,7 @@ struct csis_drvdata { >>   * @index: the hardware instance index >>   * @pdev: CSIS platform device >>   * @phy: pointer to the CSIS generic PHY >> - * @regs: mmaped I/O registers memory >> + * @regs: mmapped I/O registers memory >>   * @supplies: CSIS regulator supplies >>   * @clock: CSIS clocks >>   * @irq: requested s5p-mipi-csis irq number >> @@ -745,7 +745,7 @@ static int s5pcsis_parse_dt(struct platform_device >> *pdev, >>          goto err; >>      } >> -   /* Get MIPI CSI-2 bus configration from the endpoint node. */ >> +   /* Get MIPI CSI-2 bus configuration from the endpoint node. */ >>      of_property_read_u32(node, "samsung,csis-hs-settle", >>                      &state->hs_settle); >>      state->wclk_ext = of_property_read_bool(node, >> diff --git a/drivers/media/platform/marvell-ccic/mmp-driver.c >> b/drivers/media/platform/marvell-ccic/mmp-driver.c >> index 70a2833db0d1..af76eb637773 100644 >> --- a/drivers/media/platform/marvell-ccic/mmp-driver.c >> +++ b/drivers/media/platform/marvell-ccic/mmp-driver.c >> @@ -240,8 +240,8 @@ static void mmpcam_calc_dphy(struct mcam_camera >> *mcam) >>       * bit 8 ~ bit 15: HS_SETTLE >>       *  Time interval during which the HS >>       *  receiver shall ignore any Data Lane >> -    *  HS transistions. >> -    *  The vaule has been calibrated on >> +    *  HS transitions. >> +    *  The value has been calibrated on >>       *  different boards. It seems to work well. >>       * >>       * More detail please refer >> diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_core.h >> b/drivers/media/platform/mtk-mdp/mtk_mdp_core.h >> index ad1cff306efd..e5abb1abb3a3 100644 >> --- a/drivers/media/platform/mtk-mdp/mtk_mdp_core.h >> +++ b/drivers/media/platform/mtk-mdp/mtk_mdp_core.h >> @@ -41,7 +41,7 @@ >>  #define MTK_MDP_CTX_ERROR       BIT(5) >>  /** >> - * struct mtk_mdp_pix_align - alignement of image >> + * struct mtk_mdp_pix_align - alignment of image >>   * @org_w: source alignment of width >>   * @org_h: source alignment of height >>   * @target_w: dst alignment of width >> @@ -122,8 +122,8 @@ struct mtk_mdp_frame { >>  /** >>   * struct mtk_mdp_variant - image processor variant information >>   * @pix_max:       maximum limit of image size >> - * @pix_min:       minimun limit of image size >> - * @pix_align:       alignement of image >> + * @pix_min:       minimum limit of image size >> + * @pix_align:       alignment of image >>   * @h_scale_up_max:   maximum scale-up in horizontal >>   * @v_scale_up_max:   maximum scale-up in vertical >>   * @h_scale_down_max:   maximum scale-down in horizontal >> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c >> b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c >> index ba619647bc10..794aba685120 100644 >> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c >> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c >> @@ -1170,7 +1170,7 @@ static void vb2ops_vdec_buf_queue(struct >> vb2_buffer *vb) >>      ret = vdec_if_decode(ctx, &src_mem, NULL, &res_chg); >>      if (ret || !res_chg) { >>          /* >> -        * fb == NULL menas to parse SPS/PPS header or >> +        * fb == NULL means to parse SPS/PPS header or >>           * resolution info in src_mem. Decode can fail >>           * if there is no SPS header or picture info >>           * in bs >> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h >> b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h >> index 8aba69555b12..e7e2a108def9 100644 >> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h >> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h >> @@ -151,9 +151,9 @@ struct mtk_q_data { >>   * @intra_period: I frame period >>   * @gop_size: group of picture size, it's used as the intra frame >> period >>   * @framerate_num: frame rate numerator. ex: framerate_num=30 and >> - *          framerate_denom=1 menas FPS is 30 >> + *          framerate_denom=1 means FPS is 30 >>   * @framerate_denom: frame rate denominator. ex: framerate_num=30 and >> - *            framerate_denom=1 menas FPS is 30 >> + *            framerate_denom=1 means FPS is 30 >>   * @h264_max_qp: Max value for H.264 quantization parameter >>   * @h264_profile: V4L2 defined H.264 profile >>   * @h264_level: V4L2 defined H.264 level >> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c >> b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c >> index d1f12257bf66..2af654240d96 100644 >> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c >> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c >> @@ -393,7 +393,7 @@ static void mtk_venc_set_param(struct >> mtk_vcodec_ctx *ctx, >>          param->input_yuv_fmt = VENC_YUV_FORMAT_NV21; >>          break; >>      default: >> -       mtk_v4l2_err("Unsupport fourcc =%d", q_data_src->fmt->fourcc); >> +       mtk_v4l2_err("Unsupported fourcc =%d", q_data_src->fmt->fourcc); >>          break; >>      } >>      param->h264_profile = enc_params->h264_profile; >> diff --git a/drivers/media/platform/mtk-vcodec/vdec/vdec_h264_if.c >> b/drivers/media/platform/mtk-vcodec/vdec/vdec_h264_if.c >> index aa3ce41898bc..02c960c63ac0 100644 >> --- a/drivers/media/platform/mtk-vcodec/vdec/vdec_h264_if.c >> +++ b/drivers/media/platform/mtk-vcodec/vdec/vdec_h264_if.c >> @@ -55,7 +55,7 @@ struct h264_fb { >>  /** >>   * struct h264_ring_fb_list - ring frame buffer list >> - * @fb_list  : frame buffer arrary >> + * @fb_list  : frame buffer array >>   * @read_idx : read index >>   * @write_idx : write index >>   * @count    : buffer count in list >> @@ -72,7 +72,7 @@ struct h264_ring_fb_list { >>  /** >>   * struct vdec_h264_dec_info - decode information >>   * @dpb_sz       : decoding picture buffer size >> - * @resolution_changed : resoltion change happen >> + * @resolution_changed : resolution change happen >>   * @realloc_mv_buf   : flag to notify driver to re-allocate mv buffer >>   * @reserved       : for 8 bytes alignment >>   * @bs_dma       : Input bit-stream buffer dma address >> diff --git a/drivers/media/platform/mtk-vcodec/vdec/vdec_vp8_if.c >> b/drivers/media/platform/mtk-vcodec/vdec/vdec_vp8_if.c >> index 3e84a761db3a..bac3723038de 100644 >> --- a/drivers/media/platform/mtk-vcodec/vdec/vdec_vp8_if.c >> +++ b/drivers/media/platform/mtk-vcodec/vdec/vdec_vp8_if.c >> @@ -120,7 +120,7 @@ struct vdec_vp8_hw_reg_base { >>  /** >>   * struct vdec_vp8_vpu_inst - VPU instance for VP8 decode >>   * @wq_hd   : Wait queue to wait VPU message ack >> - * @signaled   : 1 - Host has received ack message from VPU, 0 - not >> recevie >> + * @signaled   : 1 - Host has received ack message from VPU, 0 - not >> receive >>   * @failure   : VPU execution result status 0 - success, others - fail >>   * @inst_addr   : VPU decoder instance address >>   */ >> diff --git a/drivers/media/platform/mtk-vcodec/vdec_drv_if.h >> b/drivers/media/platform/mtk-vcodec/vdec_drv_if.h >> index ded1154481cd..9a21591f3818 100644 >> --- a/drivers/media/platform/mtk-vcodec/vdec_drv_if.h >> +++ b/drivers/media/platform/mtk-vcodec/vdec_drv_if.h >> @@ -80,7 +80,7 @@ void vdec_if_deinit(struct mtk_vcodec_ctx *ctx); >>   * vdec_if_decode() - trigger decode >>   * @ctx   : [in] v4l2 context >>   * @bs   : [in] input bitstream >> - * @fb   : [in] frame buffer to store decoded frame, when null menas >> parse >> + * @fb   : [in] frame buffer to store decoded frame, when null means >> parse >>   *   header only >>   * @res_chg   : [out] resolution change happens if current bs have >> different >>   *   picture width/height >> diff --git a/drivers/media/platform/mtk-vcodec/vdec_vpu_if.h >> b/drivers/media/platform/mtk-vcodec/vdec_vpu_if.h >> index cd37bb2a610f..79d8eac7f5e2 100644 >> --- a/drivers/media/platform/mtk-vcodec/vdec_vpu_if.h >> +++ b/drivers/media/platform/mtk-vcodec/vdec_vpu_if.h >> @@ -62,7 +62,7 @@ int vpu_dec_start(struct vdec_vpu_inst *vpu, >> uint32_t *data, unsigned int len); >>  /** >>   * vpu_dec_end - end decoding, basically the function will be >> invoked once >>   *              when HW decoding done interrupt received >> successfully. The >> - *              decoder in VPU will continute to do referene frame >> management >> + *              decoder in VPU will continue to do reference frame >> management >>   *              and check if there is a new decoded frame available >> to display. >>   * >>   * @vpu : instance for vdec_vpu_inst >> diff --git a/drivers/media/platform/omap/omap_vout.c >> b/drivers/media/platform/omap/omap_vout.c >> index ff3de2dce5a2..37f0d7146dfa 100644 >> --- a/drivers/media/platform/omap/omap_vout.c >> +++ b/drivers/media/platform/omap/omap_vout.c >> @@ -1129,7 +1129,7 @@ static int vidioc_s_fmt_vid_out(struct file >> *file, void *fh, >>      } >>      timing = &dssdev->panel.timings; >> -   /* We dont support RGB24-packed mode if vrfb rotation >> +   /* We don't support RGB24-packed mode if vrfb rotation >>       * is enabled*/ >>      if ((is_rotation_enabled(vout)) && >>              f->fmt.pix.pixelformat == V4L2_PIX_FMT_RGB24) { >> @@ -1147,7 +1147,7 @@ static int vidioc_s_fmt_vid_out(struct file >> *file, void *fh, >>          vout->fbuf.fmt.width = timing->x_res; >>      } >> -   /* change to samller size is OK */ >> +   /* change to smaller size is OK */ >>      bpp = omap_vout_try_format(&f->fmt.pix); >>      f->fmt.pix.sizeimage = f->fmt.pix.width * f->fmt.pix.height * bpp; >> diff --git a/drivers/media/platform/omap/omap_voutdef.h >> b/drivers/media/platform/omap/omap_voutdef.h >> index 56b630b1c8b4..c740393c8509 100644 >> --- a/drivers/media/platform/omap/omap_voutdef.h >> +++ b/drivers/media/platform/omap/omap_voutdef.h >> @@ -37,7 +37,7 @@ >>  #define VID_MAX_WIDTH       1280   /* Largest width */ >>  #define VID_MAX_HEIGHT       720   /* Largest height */ >> -/* Mimimum requirement is 2x2 for DSS */ >> +/* Minimum requirement is 2x2 for DSS */ >>  #define VID_MIN_WIDTH       2 >>  #define VID_MIN_HEIGHT       2 >> @@ -135,7 +135,7 @@ struct omap_vout_device { >>      enum omap_color_mode dss_mode; >>      /* we don't allow to request new buffer when old buffers are >> -    * still mmaped >> +    * still mmapped >>       */ >>      int mmap_count; >> diff --git a/drivers/media/platform/omap3isp/isp.c >> b/drivers/media/platform/omap3isp/isp.c >> index 13f2828d880d..bd57174d81a7 100644 >> --- a/drivers/media/platform/omap3isp/isp.c >> +++ b/drivers/media/platform/omap3isp/isp.c >> @@ -1517,7 +1517,7 @@ void omap3isp_print_status(struct isp_device *isp) >>   * >>   * To solve this problem power management support is split into >> prepare/complete >>   * and suspend/resume operations. The pipelines are stopped in >> prepare() and the >> - * ISP clocks get disabled in suspend(). Similarly, the clocks are >> reenabled in >> + * ISP clocks get disabled in suspend(). Similarly, the clocks are >> re-enabled in >>   * resume(), and the the pipelines are restarted in complete(). >>   * >>   * TODO: PM dependencies between the ISP and sensors are not >> modelled explicitly >> diff --git a/drivers/media/platform/omap3isp/ispccdc.c >> b/drivers/media/platform/omap3isp/ispccdc.c >> index 14a1c24037c4..261ad1175f98 100644 >> --- a/drivers/media/platform/omap3isp/ispccdc.c >> +++ b/drivers/media/platform/omap3isp/ispccdc.c >> @@ -1594,7 +1594,7 @@ static int ccdc_isr_buffer(struct >> isp_ccdc_device *ccdc) >>          return 0; >>      /* We're in continuous mode, and memory writes were disabled due >> to a >> -    * buffer underrun. Reenable them now that we have a buffer. The >> buffer >> +    * buffer underrun. Re-enable them now that we have a buffer. The >> buffer >>       * address has been set in ccdc_video_queue. >>       */ >>      if (ccdc->state == ISP_PIPELINE_STREAM_CONTINUOUS && >> ccdc->underrun) { >> @@ -1712,7 +1712,7 @@ static void ccdc_vd1_isr(struct isp_ccdc_device >> *ccdc) >>       * data to memory the CCDC and LSC are stopped immediately but >>       * without change the CCDC stopping state machine. The CCDC >>       * stopping state machine should be used only when user request >> -    * for stopping is received (SINGLESHOT is an exeption). >> +    * for stopping is received (SINGLESHOT is an exception). >>       */ >>      switch (ccdc->state) { >>      case ISP_PIPELINE_STREAM_SINGLESHOT: >> diff --git a/drivers/media/platform/omap3isp/ispcsi2.c >> b/drivers/media/platform/omap3isp/ispcsi2.c >> index 9c180f607bcb..da66ea65be5d 100644 >> --- a/drivers/media/platform/omap3isp/ispcsi2.c >> +++ b/drivers/media/platform/omap3isp/ispcsi2.c >> @@ -710,7 +710,7 @@ static void csi2_isr_ctx(struct isp_csi2_device >> *csi2, >>      /* Skip interrupts until we reach the frame skip count. The CSI2 >> will be >>       * automatically disabled, as the frame skip count has been >> programmed >> -    * in the CSI2_CTx_CTRL1::COUNT field, so reenable it. >> +    * in the CSI2_CTx_CTRL1::COUNT field, so re-enable it. >>       * >>       * It would have been nice to rely on the FRAME_NUMBER interrupt >> instead >>       * but it turned out that the interrupt is only generated when >> the CSI2 >> diff --git a/drivers/media/platform/pxa_camera.c >> b/drivers/media/platform/pxa_camera.c >> index 3cf3c6390cc8..4fe228752a43 100644 >> --- a/drivers/media/platform/pxa_camera.c >> +++ b/drivers/media/platform/pxa_camera.c >> @@ -1631,7 +1631,7 @@ static int pxa_camera_set_bus_param(struct >> pxa_camera_dev *pcdev) >>      pcdev->channels = 1; >> -   /* Make choises, based on platform preferences */ >> +   /* Make choices, based on platform preferences */ >>      if ((common_flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH) && >>          (common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)) { >>          if (pcdev->platform_flags & PXA_CAMERA_HSP) >> diff --git a/drivers/media/platform/qcom/venus/core.h >> b/drivers/media/platform/qcom/venus/core.h >> index 79c7e816c706..7a3feb5cee00 100644 >> --- a/drivers/media/platform/qcom/venus/core.h >> +++ b/drivers/media/platform/qcom/venus/core.h >> @@ -219,7 +219,7 @@ struct venus_buffer { >>  #define to_venus_buffer(ptr)   container_of(ptr, struct >> venus_buffer, vb) >>  /** >> - * struct venus_inst - holds per instance paramerters >> + * struct venus_inst - holds per instance parameters >>   * >>   * @list:   used for attach an instance to the core >>   * @lock:   instance lock >> diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c >> b/drivers/media/platform/rcar-vin/rcar-dma.c >> index beb9248992a4..2207a31d355e 100644 >> --- a/drivers/media/platform/rcar-vin/rcar-dma.c >> +++ b/drivers/media/platform/rcar-vin/rcar-dma.c >> @@ -681,7 +681,7 @@ static int rvin_setup(struct rvin_dev *vin) >>          break; >>      } >> -   /* Enable VSYNC Field Toogle mode after one VSYNC input */ >> +   /* Enable VSYNC Field Toggle mode after one VSYNC input */ >>      if (vin->info->model == RCAR_GEN3) >>          dmr2 = VNDMR2_FTEV; >>      else >> diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c >> b/drivers/media/platform/rcar-vin/rcar-v4l2.c >> index 7a2851790b91..7cbdcbf9b090 100644 >> --- a/drivers/media/platform/rcar-vin/rcar-v4l2.c >> +++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c >> @@ -665,7 +665,7 @@ static void rvin_mc_try_format(struct rvin_dev *vin, >>       * The V4L2 specification clearly documents the colorspace fields >>       * as being set by drivers for capture devices. Using the values >>       * supplied by userspace thus wouldn't comply with the API. Until >> -    * the API is updated force fixed vaules. >> +    * the API is updated force fixed values. >>       */ >>      pix->colorspace = RVIN_DEFAULT_COLORSPACE; >>      pix->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(pix->colorspace); >> @@ -964,7 +964,7 @@ void rvin_v4l2_unregister(struct rvin_dev *vin) >>      v4l2_info(&vin->v4l2_dev, "Removing %s\n", >>            video_device_node_name(&vin->vdev)); >> -   /* Checks internaly if vdev have been init or not */ >> +   /* Checks internally if vdev have been init or not */ >>      video_unregister_device(&vin->vdev); >>  } >> diff --git a/drivers/media/platform/rockchip/rga/rga-hw.c >> b/drivers/media/platform/rockchip/rga/rga-hw.c >> index 96d1b1b3fe8e..843e50d17a72 100644 >> --- a/drivers/media/platform/rockchip/rga/rga-hw.c >> +++ b/drivers/media/platform/rockchip/rga/rga-hw.c >> @@ -256,7 +256,7 @@ static void rga_cmd_set_trans_info(struct rga_ctx >> *ctx) >>      } >>      /* >> -    * Cacluate the up/down scaling mode/factor. >> +    * Calculate the up/down scaling mode/factor. >>       * >>       * RGA used to scale the picture first, and then rotate second, >>       * so we need to swap the w/h when rotate degree is 90/270. >> @@ -304,7 +304,7 @@ static void rga_cmd_set_trans_info(struct rga_ctx >> *ctx) >>      } >>      /* >> -    * Cacluate the framebuffer virtual strides and active size, >> +    * Calculate the framebuffer virtual strides and active size, >>       * note that the step of vir_stride / vir_width is 4 byte words >>       */ >>      src_vir_info.data.vir_stride = ctx->in.stride >> 2; >> @@ -318,7 +318,7 @@ static void rga_cmd_set_trans_info(struct rga_ctx >> *ctx) >>      dst_act_info.data.act_width = dst_w - 1; >>      /* >> -    * Cacluate the source framebuffer base address with offset pixel. >> +    * Calculate the source framebuffer base address with offset pixel. >>       */ >>      src_offsets = rga_get_addr_offset(&ctx->in, src_x, src_y, >>                        src_w, src_h); >> diff --git a/drivers/media/platform/s3c-camif/camif-core.h >> b/drivers/media/platform/s3c-camif/camif-core.h >> index 1f5c8c94ce89..be5e7357dffc 100644 >> --- a/drivers/media/platform/s3c-camif/camif-core.h >> +++ b/drivers/media/platform/s3c-camif/camif-core.h >> @@ -260,7 +260,7 @@ struct camif_vp { >>   * @clock:     clocks required for the CAMIF operation >>   * @lock:     mutex protecting this data structure >>   * @slock:     spinlock protecting CAMIF registers >> - * @io_base:     start address of the mmaped CAMIF registers >> + * @io_base:     start address of the mmapped CAMIF registers >>   */ >>  struct camif_dev { >>      struct media_device       media_dev; >> diff --git a/drivers/media/platform/s5p-jpeg/jpeg-core.h >> b/drivers/media/platform/s5p-jpeg/jpeg-core.h >> index 90fda4b720eb..144c102ff05f 100644 >> --- a/drivers/media/platform/s5p-jpeg/jpeg-core.h >> +++ b/drivers/media/platform/s5p-jpeg/jpeg-core.h >> @@ -153,7 +153,7 @@ struct s5p_jpeg_variant { >>  /** >>   * struct jpeg_fmt - driver's internal color format data >> - * @name:   format descritpion >> + * @name:   format description >>   * @fourcc:   the fourcc code, 0 if not applicable >>   * @depth:   number of bits per pixel >>   * @colplanes:   number of color planes (1 for packed formats) >> @@ -193,7 +193,7 @@ struct s5p_jpeg_marker { >>   * @sos:   SOS marker's position relative to the buffer beginning >>   * @dht:   DHT markers' positions relative to the buffer beginning >>   * @dqt:   DQT markers' positions relative to the buffer beginning >> - * @sof:   SOF0 marker's postition relative to the buffer beginning >> + * @sof:   SOF0 marker's position relative to the buffer beginning >>   * @sof_len:   SOF0 marker's payload length (without length field >> itself) >>   * @components:   number of image components >>   * @size:   image buffer size in bytes >> diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h >> b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h >> index 20442a9b9f7a..24148020baa9 100644 >> --- a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h >> +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h >> @@ -268,7 +268,7 @@ struct s5p_mfc_priv_buf { >>   * @enc_ctrl_handler:   control framework handler for encoding >>   * @pm:           power management control >>   * @variant:       MFC hardware variant information >> - * @num_inst:       couter of active MFC instances >> + * @num_inst:       counter of active MFC instances >>   * @irqlock:       lock for operations on videobuf2 queues >>   * @condlock:       lock for changing/checking if a context is >> ready to be >>   *           processed >> diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c >> b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c >> index ee7b15b335e0..9f832ba7bc8c 100644 >> --- a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c >> +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c >> @@ -51,7 +51,7 @@ int s5p_mfc_load_firmware(struct s5p_mfc_dev *dev) >>      struct firmware *fw_blob; >>      int i, err = -EINVAL; >> -   /* Firmare has to be present as a separate file or compiled >> +   /* Firmware has to be present as a separate file or compiled >>       * into kernel. */ >>      mfc_debug_enter(); >> diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c >> b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c >> index f4c0e3a8f27d..e111f9c47179 100644 >> --- a/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c >> +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c >> @@ -602,7 +602,7 @@ static int vidioc_querybuf(struct file *file, void >> *priv, >>      int i; >>      if (buf->memory != V4L2_MEMORY_MMAP) { >> -       mfc_err("Only mmaped buffers can be used\n"); >> +       mfc_err("Only mmapped buffers can be used\n"); >>          return -EINVAL; >>      } >>      mfc_debug(2, "State: %d, buf->type: %d\n", ctx->state, buf->type); >> diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c >> b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c >> index 0913881219ff..6144e95f6425 100644 >> --- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c >> +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c >> @@ -1293,7 +1293,7 @@ static int s5p_mfc_run_init_dec_buffers(struct >> s5p_mfc_ctx *ctx) >>       * First set the output frame buffers >>       */ >>      if (ctx->capture_state != QUEUE_BUFS_MMAPED) { >> -       mfc_err("It seems that not all destination buffers were >> mmaped\nMFC requires that all destination are mmaped before starting >> processing\n"); >> +       mfc_err("It seems that not all destination buffers were >> mmapped\nMFC requires that all destination are mmapped before starting >> processing\n"); >>          return -EAGAIN; >>      } >>      if (list_empty(&ctx->src_queue)) { >> diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c >> b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c >> index 7c629be43205..281699ab7fe1 100644 >> --- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c >> +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c >> @@ -53,7 +53,7 @@ static int s5p_mfc_alloc_dec_temp_buffers_v6(struct >> s5p_mfc_ctx *ctx) >>      return 0; >>  } >> -/* Release temproary buffers for decoding */ >> +/* Release temporary buffers for decoding */ >>  static void s5p_mfc_release_dec_desc_buffer_v6(struct s5p_mfc_ctx *ctx) >>  { >>      /* NOP */ >> @@ -1928,7 +1928,7 @@ static inline int >> s5p_mfc_run_init_dec_buffers(struct s5p_mfc_ctx *ctx) >>      if (ctx->capture_state != QUEUE_BUFS_MMAPED) { >>          mfc_err("It seems that not all destination buffers were\n" >> -           "mmaped.MFC requires that all destination are mmaped\n" >> +           "mmapped.MFC requires that all destination are mmapped\n" >>              "before starting processing.\n"); >>          return -EAGAIN; >>      } >> diff --git a/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.h >> b/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.h >> index 3dbb3a287cc0..c9d6021904cd 100644 >> --- a/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.h >> +++ b/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.h >> @@ -193,7 +193,7 @@ struct c8sectpfei { >>  #define C8SECTPFE_SYS_ENABLE            BIT(0) >>  /* >> - * Ponter record data structure required for each input block >> + * Pointer record data structure required for each input block >>   * see Table 82 on page 167 of functional specification. >>   */ >> diff --git a/drivers/media/platform/sti/delta/delta.h >> b/drivers/media/platform/sti/delta/delta.h >> index 2ba99922c05b..914556030e70 100644 >> --- a/drivers/media/platform/sti/delta/delta.h >> +++ b/drivers/media/platform/sti/delta/delta.h >> @@ -286,7 +286,7 @@ struct delta_dec { >>       * Header parsing must be done using decode(), giving >>       * explicitly header access unit or first access unit of bitstream. >>       * If no valid header is found, get_streaminfo will return >> -ENODATA, >> -    * in this case the next bistream access unit must be decoded till >> +    * in this case the next bitstream access unit must be decoded till >>       * get_streaminfo becomes successful. >>       */ >>      int (*get_streaminfo)(struct delta_ctx *ctx, >> diff --git a/drivers/media/platform/sti/hva/hva-h264.c >> b/drivers/media/platform/sti/hva/hva-h264.c >> index b61a5d337d2a..c34f7cf5aed2 100644 >> --- a/drivers/media/platform/sti/hva/hva-h264.c >> +++ b/drivers/media/platform/sti/hva/hva-h264.c >> @@ -626,7 +626,7 @@ static int hva_h264_prepare_task(struct hva_ctx >> *pctx, >>      td->frame_width = frame_width; >>      td->frame_height = frame_height; >> -   /* set frame alignement */ >> +   /* set frame alignment */ >>      td->window_width = frame_width; >>      td->window_height = frame_height; >>      td->window_horizontal_offset = 0; >> diff --git a/drivers/media/platform/stm32/stm32-dcmi.c >> b/drivers/media/platform/stm32/stm32-dcmi.c >> index 6732874114cf..5fe5b38fa901 100644 >> --- a/drivers/media/platform/stm32/stm32-dcmi.c >> +++ b/drivers/media/platform/stm32/stm32-dcmi.c >> @@ -1544,7 +1544,7 @@ static void dcmi_graph_notify_unbind(struct >> v4l2_async_notifier *notifier, >>      dev_dbg(dcmi->dev, "Removing %s\n", >> video_device_node_name(dcmi->vdev)); >> -   /* Checks internaly if vdev has been init or not */ >> +   /* Checks internally if vdev has been init or not */ >>      video_unregister_device(dcmi->vdev); >>  } >> diff --git a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h >> b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h >> index 0bb000712c33..85f97d4f086e 100644 >> --- a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h >> +++ b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h >> @@ -65,7 +65,7 @@ bool sun6i_csi_is_format_supported(struct sun6i_csi >> *csi, u32 pixformat, >>  int sun6i_csi_set_power(struct sun6i_csi *csi, bool enable); >>  /** >> - * sun6i_csi_update_config() - update the csi register setttings >> + * sun6i_csi_update_config() - update the csi register settings >>   * @csi:   pointer to the csi >>   * @config:   see struct sun6i_csi_config >>   */ >> diff --git a/drivers/media/platform/ti-vpe/vpdma.c >> b/drivers/media/platform/ti-vpe/vpdma.c >> index e2cf2b90e500..1da2cb3aaf0c 100644 >> --- a/drivers/media/platform/ti-vpe/vpdma.c >> +++ b/drivers/media/platform/ti-vpe/vpdma.c >> @@ -404,7 +404,7 @@ EXPORT_SYMBOL(vpdma_map_desc_buf); >>  /* >>   * unmap descriptor/payload DMA buffer, disabling DMA access and >> - * allowing the main processor to acces the data >> + * allowing the main processor to access the data >>   */ >>  void vpdma_unmap_desc_buf(struct vpdma_data *vpdma, struct vpdma_buf >> *buf) >>  { >> @@ -501,7 +501,7 @@ void vpdma_reset_desc_list(struct vpdma_desc_list >> *list) >>  EXPORT_SYMBOL(vpdma_reset_desc_list); >>  /* >> - * free the buffer allocated fot the VPDMA descriptor list, this >> should be >> + * free the buffer allocated for the VPDMA descriptor list, this >> should be >>   * called when the user doesn't want to use VPDMA any more. >>   */ >>  void vpdma_free_desc_list(struct vpdma_desc_list *list) >> @@ -790,7 +790,7 @@ static void dump_dtd(struct vpdma_dtd *dtd) >>   * append an outbound data transfer descriptor to the given >> descriptor list, >>   * this sets up a 'client to memory' VPDMA transfer for the given >> VPDMA channel >>   * >> - * @list: vpdma desc list to which we add this decriptor >> + * @list: vpdma desc list to which we add this descriptor >>   * @width: width of the image in pixels in memory >>   * @c_rect: compose params of output image >>   * @fmt: vpdma data format of the buffer >> @@ -798,7 +798,7 @@ static void dump_dtd(struct vpdma_dtd *dtd) >>   * max_width: enum for maximum width of data transfer >>   * max_height: enum for maximum height of data transfer >>   * chan: VPDMA channel >> - * flags: VPDMA flags to configure some descriptor fileds >> + * flags: VPDMA flags to configure some descriptor fields >>   */ >>  void vpdma_add_out_dtd(struct vpdma_desc_list *list, int width, >>          int stride, const struct v4l2_rect *c_rect, >> @@ -863,14 +863,14 @@ EXPORT_SYMBOL(vpdma_rawchan_add_out_dtd); >>   * append an inbound data transfer descriptor to the given >> descriptor list, >>   * this sets up a 'memory to client' VPDMA transfer for the given >> VPDMA channel >>   * >> - * @list: vpdma desc list to which we add this decriptor >> + * @list: vpdma desc list to which we add this descriptor >>   * @width: width of the image in pixels in memory(not the cropped >> width) >>   * @c_rect: crop params of input image >>   * @fmt: vpdma data format of the buffer >>   * dma_addr: dma address as seen by VPDMA >>   * chan: VPDMA channel >>   * field: top or bottom field info of the input image >> - * flags: VPDMA flags to configure some descriptor fileds >> + * flags: VPDMA flags to configure some descriptor fields >>   * frame_width/height: the complete width/height of the image >> presented to the >>   *           client (this makes sense when multiple channels are >>   *           connected to the same client, forming a larger frame) >> @@ -1008,7 +1008,7 @@ unsigned int vpdma_get_list_mask(struct >> vpdma_data *vpdma, int irq_num) >>  } >>  EXPORT_SYMBOL(vpdma_get_list_mask); >> -/* clear previosuly occured list intterupts in the LIST_STAT register */ >> +/* clear previously occurred list interupts in the LIST_STAT register */ >>  void vpdma_clear_list_stat(struct vpdma_data *vpdma, int irq_num, >>                 int list_num) >>  { >> diff --git a/drivers/media/platform/ti-vpe/vpe.c >> b/drivers/media/platform/ti-vpe/vpe.c >> index d70871d0ad2d..207e7e76c048 100644 >> --- a/drivers/media/platform/ti-vpe/vpe.c >> +++ b/drivers/media/platform/ti-vpe/vpe.c >> @@ -876,7 +876,7 @@ static int set_srcdst_params(struct vpe_ctx *ctx) >>          /* >>           * we make sure that the source image has a 16 byte aligned >>           * stride, we need to do the same for the motion vector buffer >> -        * by aligning it's stride to the next 16 byte boundry. this >> +        * by aligning it's stride to the next 16 byte boundary. this >>           * extra space will not be used by the de-interlacer, but will >>           * ensure that vpdma operates correctly >>           */ >> diff --git a/drivers/media/platform/vsp1/vsp1_brx.c >> b/drivers/media/platform/vsp1/vsp1_brx.c >> index 5e50178b057d..58ad248cd7f7 100644 >> --- a/drivers/media/platform/vsp1/vsp1_brx.c >> +++ b/drivers/media/platform/vsp1/vsp1_brx.c >> @@ -296,7 +296,7 @@ static void brx_configure_stream(struct >> vsp1_entity *entity, >>      /* >>       * The hardware is extremely flexible but we have no userspace >> API to >>       * expose all the parameters, nor is it clear whether we would >> have use >> -    * cases for all the supported modes. Let's just harcode the >> parameters >> +    * cases for all the supported modes. Let's just hardcode the >> parameters >>       * to sane default values for now. >>       */ >> @@ -373,7 +373,7 @@ static void brx_configure_stream(struct >> vsp1_entity *entity, >>          vsp1_brx_write(brx, dlb, VI6_BRU_CTRL(i), ctrl); >>          /* >> -        * Harcode the blending formula to >> +        * Hardcode the blending formula to >>           * >>           *   DSTc = DSTc * (1 - SRCa) + SRCc * SRCa >>           *   DSTa = DSTa * (1 - SRCa) + SRCa >> diff --git a/drivers/media/platform/xilinx/xilinx-vip.c >> b/drivers/media/platform/xilinx/xilinx-vip.c >> index 18f98838111b..08a825c3a3f6 100644 >> --- a/drivers/media/platform/xilinx/xilinx-vip.c >> +++ b/drivers/media/platform/xilinx/xilinx-vip.c >> @@ -166,7 +166,7 @@ EXPORT_SYMBOL_GPL(xvip_set_format_size); >>   * the register, otherwise the bitmask is cleared from the register >>   * when the flag @set is false. >>   * >> - * Fox eample, this function can be used to set a control with a >> boolean value >> + * Fox example, this function can be used to set a control with a >> boolean value >>   * requested by users. If the caller knows whether to set or clear >> in the first >>   * place, the caller should call xvip_clr() or xvip_set() directly >> instead of >>   * using this function. >>
Hi Mauro, Thanks for your patch, Mauro Carvalho Chehab <mchehab+samsung@kernel.org> wrote on Mon [2019-Feb-18 14:29:00 -0500]: > Use codespell to fix lots of typos over frontends. > > Manually verified to avoid false-positives. > > Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> For drivers/media/platform/ti-vpe/* Reviewed-by: Benoit Parrot <bparrot@ti.com> Regards, Benoit
Hi Mauro, On 18/02/2019 19:29, Mauro Carvalho Chehab wrote: > Use codespell to fix lots of typos over frontends. > > Manually verified to avoid false-positives. For drivers/media/platform/Kconfig (RCAR_DRIF), and drivers/media/platform/vsp1/vsp1_brx.c Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> > Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> > --- > drivers/media/platform/Kconfig | 2 +- > drivers/media/platform/atmel/atmel-isi.c | 4 ++-- > drivers/media/platform/coda/coda-jpeg.c | 2 +- > drivers/media/platform/davinci/isif.c | 4 ++-- > drivers/media/platform/davinci/vpbe.c | 2 +- > drivers/media/platform/davinci/vpif.c | 2 +- > drivers/media/platform/davinci/vpif_display.c | 4 ++-- > .../media/platform/exynos4-is/fimc-is-command.h | 2 +- > drivers/media/platform/exynos4-is/fimc-is-param.h | 2 +- > drivers/media/platform/exynos4-is/media-dev.h | 2 +- > drivers/media/platform/exynos4-is/mipi-csis.c | 4 ++-- > drivers/media/platform/marvell-ccic/mmp-driver.c | 4 ++-- > drivers/media/platform/mtk-mdp/mtk_mdp_core.h | 6 +++--- > drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c | 2 +- > drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h | 4 ++-- > drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c | 2 +- > .../media/platform/mtk-vcodec/vdec/vdec_h264_if.c | 4 ++-- > .../media/platform/mtk-vcodec/vdec/vdec_vp8_if.c | 2 +- > drivers/media/platform/mtk-vcodec/vdec_drv_if.h | 2 +- > drivers/media/platform/mtk-vcodec/vdec_vpu_if.h | 2 +- > drivers/media/platform/omap/omap_vout.c | 4 ++-- > drivers/media/platform/omap/omap_voutdef.h | 4 ++-- > drivers/media/platform/omap3isp/isp.c | 2 +- > drivers/media/platform/omap3isp/ispccdc.c | 4 ++-- > drivers/media/platform/omap3isp/ispcsi2.c | 2 +- > drivers/media/platform/pxa_camera.c | 2 +- > drivers/media/platform/qcom/venus/core.h | 2 +- > drivers/media/platform/rcar-vin/rcar-dma.c | 2 +- > drivers/media/platform/rcar-vin/rcar-v4l2.c | 4 ++-- > drivers/media/platform/rockchip/rga/rga-hw.c | 6 +++--- > drivers/media/platform/s3c-camif/camif-core.h | 2 +- > drivers/media/platform/s5p-jpeg/jpeg-core.h | 4 ++-- > drivers/media/platform/s5p-mfc/s5p_mfc_common.h | 2 +- > drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c | 2 +- > drivers/media/platform/s5p-mfc/s5p_mfc_dec.c | 2 +- > drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c | 2 +- > drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c | 4 ++-- > .../media/platform/sti/c8sectpfe/c8sectpfe-core.h | 2 +- > drivers/media/platform/sti/delta/delta.h | 2 +- > drivers/media/platform/sti/hva/hva-h264.c | 2 +- > drivers/media/platform/stm32/stm32-dcmi.c | 2 +- > drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h | 2 +- > drivers/media/platform/ti-vpe/vpdma.c | 14 +++++++------- > drivers/media/platform/ti-vpe/vpe.c | 2 +- > drivers/media/platform/vsp1/vsp1_brx.c | 4 ++-- > drivers/media/platform/xilinx/xilinx-vip.c | 2 +- > 46 files changed, 70 insertions(+), 70 deletions(-) > > diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig > index 6cff26b29a38..4acbed189644 100644 > --- a/drivers/media/platform/Kconfig > +++ b/drivers/media/platform/Kconfig > @@ -668,7 +668,7 @@ menuconfig SDR_PLATFORM_DRIVERS > if SDR_PLATFORM_DRIVERS > > config VIDEO_RCAR_DRIF > - tristate "Renesas Digitial Radio Interface (DRIF)" > + tristate "Renesas Digital Radio Interface (DRIF)" > depends on VIDEO_V4L2 > depends on ARCH_RENESAS || COMPILE_TEST > select VIDEOBUF2_VMALLOC > diff --git a/drivers/media/platform/atmel/atmel-isi.c b/drivers/media/platform/atmel/atmel-isi.c > index fdb255e4a956..08b8d5583080 100644 > --- a/drivers/media/platform/atmel/atmel-isi.c > +++ b/drivers/media/platform/atmel/atmel-isi.c > @@ -110,7 +110,7 @@ struct atmel_isi { > bool enable_preview_path; > > struct completion complete; > - /* ISI peripherial clock */ > + /* ISI peripheral clock */ > struct clk *pclk; > unsigned int irq; > > @@ -1078,7 +1078,7 @@ static void isi_graph_notify_unbind(struct v4l2_async_notifier *notifier, > > dev_dbg(isi->dev, "Removing %s\n", video_device_node_name(isi->vdev)); > > - /* Checks internaly if vdev have been init or not */ > + /* Checks internally if vdev have been init or not */ > video_unregister_device(isi->vdev); > } > > diff --git a/drivers/media/platform/coda/coda-jpeg.c b/drivers/media/platform/coda/coda-jpeg.c > index 9f899a6cefed..39a2351c1e48 100644 > --- a/drivers/media/platform/coda/coda-jpeg.c > +++ b/drivers/media/platform/coda/coda-jpeg.c > @@ -103,7 +103,7 @@ static const unsigned char chroma_ac_value[162 + 2] = { > > /* > * Quantization tables for luminance and chrominance components in > - * zig-zag scan order from the Freescale i.MX VPU libaries > + * zig-zag scan order from the Freescale i.MX VPU libraries > */ > > static unsigned char luma_q[64] = { > diff --git a/drivers/media/platform/davinci/isif.c b/drivers/media/platform/davinci/isif.c > index 340f8218f54d..47cecd10eb9f 100644 > --- a/drivers/media/platform/davinci/isif.c > +++ b/drivers/media/platform/davinci/isif.c > @@ -328,7 +328,7 @@ static void isif_config_bclamp(struct isif_black_clamp *bc) > if (bc->en) { > val = bc->bc_mode_color << ISIF_BC_MODE_COLOR_SHIFT; > > - /* Enable BC and horizontal clamp caculation paramaters */ > + /* Enable BC and horizontal clamp calculation parameters */ > val = val | 1 | (bc->horz.mode << ISIF_HORZ_BC_MODE_SHIFT); > > regw(val, CLAMPCFG); > @@ -358,7 +358,7 @@ static void isif_config_bclamp(struct isif_black_clamp *bc) > regw(bc->horz.win_start_v_calc, CLHWIN2); > } > > - /* vertical clamp caculation paramaters */ > + /* vertical clamp calculation parameters */ > > /* Reset clamp value sel for previous line */ > val |= > diff --git a/drivers/media/platform/davinci/vpbe.c b/drivers/media/platform/davinci/vpbe.c > index 4766a7a23d16..8339163a5231 100644 > --- a/drivers/media/platform/davinci/vpbe.c > +++ b/drivers/media/platform/davinci/vpbe.c > @@ -242,7 +242,7 @@ static int vpbe_set_output(struct vpbe_device *vpbe_dev, int index) > goto unlock; > > /* > - * It is assumed that venc or extenal encoder will set a default > + * It is assumed that venc or external encoder will set a default > * mode in the sub device. For external encoder or LCD pannel output, > * we also need to set up the lcd port for the required mode. So setup > * the lcd port for the default mode that is configured in the board > diff --git a/drivers/media/platform/davinci/vpif.c b/drivers/media/platform/davinci/vpif.c > index 16352e2263d2..df66461f5d4f 100644 > --- a/drivers/media/platform/davinci/vpif.c > +++ b/drivers/media/platform/davinci/vpif.c > @@ -1,7 +1,7 @@ > /* > * vpif - Video Port Interface driver > * VPIF is a receiver and transmitter for video data. It has two channels(0, 1) > - * that receiveing video byte stream and two channels(2, 3) for video output. > + * that receiving video byte stream and two channels(2, 3) for video output. > * The hardware supports SDTV, HDTV formats, raw data capture. > * Currently, the driver supports NTSC and PAL standards. > * > diff --git a/drivers/media/platform/davinci/vpif_display.c b/drivers/media/platform/davinci/vpif_display.c > index 3517487d9760..f4b4f2a1dfc0 100644 > --- a/drivers/media/platform/davinci/vpif_display.c > +++ b/drivers/media/platform/davinci/vpif_display.c > @@ -138,7 +138,7 @@ static int vpif_buffer_queue_setup(struct vb2_queue *vq, > * vpif_buffer_queue : Callback function to add buffer to DMA queue > * @vb: ptr to vb2_buffer > * > - * This callback fucntion queues the buffer to DMA engine > + * This callback function queues the buffer to DMA engine > */ > static void vpif_buffer_queue(struct vb2_buffer *vb) > { > @@ -635,7 +635,7 @@ static int vpif_try_fmt_vid_out(struct file *file, void *priv, > struct v4l2_pix_format *pixfmt = &fmt->fmt.pix; > > /* > - * to supress v4l-compliance warnings silently correct > + * to suppress v4l-compliance warnings silently correct > * the pixelformat > */ > if (pixfmt->pixelformat != V4L2_PIX_FMT_YUV422P) > diff --git a/drivers/media/platform/exynos4-is/fimc-is-command.h b/drivers/media/platform/exynos4-is/fimc-is-command.h > index 0d1f52e394b1..b06b56b890d5 100644 > --- a/drivers/media/platform/exynos4-is/fimc-is-command.h > +++ b/drivers/media/platform/exynos4-is/fimc-is-command.h > @@ -18,7 +18,7 @@ > > #define FIMC_IS_COMMAND_VER 110 /* FIMC-IS command set version 1.10 */ > > -/* Enumeration of commands beetween the FIMC-IS and the host processor. */ > +/* Enumeration of commands between the FIMC-IS and the host processor. */ > > /* HOST to FIMC-IS */ > #define HIC_PREVIEW_STILL 0x0001 > diff --git a/drivers/media/platform/exynos4-is/fimc-is-param.h b/drivers/media/platform/exynos4-is/fimc-is-param.h > index 8e31f7642776..22923a3d405e 100644 > --- a/drivers/media/platform/exynos4-is/fimc-is-param.h > +++ b/drivers/media/platform/exynos4-is/fimc-is-param.h > @@ -298,7 +298,7 @@ enum isp_af_mode { > #define ISP_FLASH_COMMAND_AUTO 2 > #define ISP_FLASH_COMMAND_TORCH 3 /* 3 sec */ > > -/* Flash red-eye commads */ > +/* Flash red-eye commands */ > #define ISP_FLASH_REDEYE_DISABLE 0 > #define ISP_FLASH_REDEYE_ENABLE 1 > > diff --git a/drivers/media/platform/exynos4-is/media-dev.h b/drivers/media/platform/exynos4-is/media-dev.h > index 9f527670395a..a7c9490bbcb4 100644 > --- a/drivers/media/platform/exynos4-is/media-dev.h > +++ b/drivers/media/platform/exynos4-is/media-dev.h > @@ -79,7 +79,7 @@ struct fimc_camclk_info { > > /** > * struct fimc_sensor_info - image data source subdev information > - * @pdata: sensor's atrributes passed as media device's platform data > + * @pdata: sensor's attributes passed as media device's platform data > * @asd: asynchronous subdev registration data structure > * @subdev: image sensor v4l2 subdev > * @host: fimc device the sensor is currently linked to > diff --git a/drivers/media/platform/exynos4-is/mipi-csis.c b/drivers/media/platform/exynos4-is/mipi-csis.c > index 35cb0162085b..234e047e3e8f 100644 > --- a/drivers/media/platform/exynos4-is/mipi-csis.c > +++ b/drivers/media/platform/exynos4-is/mipi-csis.c > @@ -183,7 +183,7 @@ struct csis_drvdata { > * @index: the hardware instance index > * @pdev: CSIS platform device > * @phy: pointer to the CSIS generic PHY > - * @regs: mmaped I/O registers memory > + * @regs: mmapped I/O registers memory > * @supplies: CSIS regulator supplies > * @clock: CSIS clocks > * @irq: requested s5p-mipi-csis irq number > @@ -745,7 +745,7 @@ static int s5pcsis_parse_dt(struct platform_device *pdev, > goto err; > } > > - /* Get MIPI CSI-2 bus configration from the endpoint node. */ > + /* Get MIPI CSI-2 bus configuration from the endpoint node. */ > of_property_read_u32(node, "samsung,csis-hs-settle", > &state->hs_settle); > state->wclk_ext = of_property_read_bool(node, > diff --git a/drivers/media/platform/marvell-ccic/mmp-driver.c b/drivers/media/platform/marvell-ccic/mmp-driver.c > index 70a2833db0d1..af76eb637773 100644 > --- a/drivers/media/platform/marvell-ccic/mmp-driver.c > +++ b/drivers/media/platform/marvell-ccic/mmp-driver.c > @@ -240,8 +240,8 @@ static void mmpcam_calc_dphy(struct mcam_camera *mcam) > * bit 8 ~ bit 15: HS_SETTLE > * Time interval during which the HS > * receiver shall ignore any Data Lane > - * HS transistions. > - * The vaule has been calibrated on > + * HS transitions. > + * The value has been calibrated on > * different boards. It seems to work well. > * > * More detail please refer > diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_core.h b/drivers/media/platform/mtk-mdp/mtk_mdp_core.h > index ad1cff306efd..e5abb1abb3a3 100644 > --- a/drivers/media/platform/mtk-mdp/mtk_mdp_core.h > +++ b/drivers/media/platform/mtk-mdp/mtk_mdp_core.h > @@ -41,7 +41,7 @@ > #define MTK_MDP_CTX_ERROR BIT(5) > > /** > - * struct mtk_mdp_pix_align - alignement of image > + * struct mtk_mdp_pix_align - alignment of image > * @org_w: source alignment of width > * @org_h: source alignment of height > * @target_w: dst alignment of width > @@ -122,8 +122,8 @@ struct mtk_mdp_frame { > /** > * struct mtk_mdp_variant - image processor variant information > * @pix_max: maximum limit of image size > - * @pix_min: minimun limit of image size > - * @pix_align: alignement of image > + * @pix_min: minimum limit of image size > + * @pix_align: alignment of image > * @h_scale_up_max: maximum scale-up in horizontal > * @v_scale_up_max: maximum scale-up in vertical > * @h_scale_down_max: maximum scale-down in horizontal > diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c > index ba619647bc10..794aba685120 100644 > --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c > +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c > @@ -1170,7 +1170,7 @@ static void vb2ops_vdec_buf_queue(struct vb2_buffer *vb) > ret = vdec_if_decode(ctx, &src_mem, NULL, &res_chg); > if (ret || !res_chg) { > /* > - * fb == NULL menas to parse SPS/PPS header or > + * fb == NULL means to parse SPS/PPS header or > * resolution info in src_mem. Decode can fail > * if there is no SPS header or picture info > * in bs > diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h > index 8aba69555b12..e7e2a108def9 100644 > --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h > +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h > @@ -151,9 +151,9 @@ struct mtk_q_data { > * @intra_period: I frame period > * @gop_size: group of picture size, it's used as the intra frame period > * @framerate_num: frame rate numerator. ex: framerate_num=30 and > - * framerate_denom=1 menas FPS is 30 > + * framerate_denom=1 means FPS is 30 > * @framerate_denom: frame rate denominator. ex: framerate_num=30 and > - * framerate_denom=1 menas FPS is 30 > + * framerate_denom=1 means FPS is 30 > * @h264_max_qp: Max value for H.264 quantization parameter > * @h264_profile: V4L2 defined H.264 profile > * @h264_level: V4L2 defined H.264 level > diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c > index d1f12257bf66..2af654240d96 100644 > --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c > +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c > @@ -393,7 +393,7 @@ static void mtk_venc_set_param(struct mtk_vcodec_ctx *ctx, > param->input_yuv_fmt = VENC_YUV_FORMAT_NV21; > break; > default: > - mtk_v4l2_err("Unsupport fourcc =%d", q_data_src->fmt->fourcc); > + mtk_v4l2_err("Unsupported fourcc =%d", q_data_src->fmt->fourcc); > break; > } > param->h264_profile = enc_params->h264_profile; > diff --git a/drivers/media/platform/mtk-vcodec/vdec/vdec_h264_if.c b/drivers/media/platform/mtk-vcodec/vdec/vdec_h264_if.c > index aa3ce41898bc..02c960c63ac0 100644 > --- a/drivers/media/platform/mtk-vcodec/vdec/vdec_h264_if.c > +++ b/drivers/media/platform/mtk-vcodec/vdec/vdec_h264_if.c > @@ -55,7 +55,7 @@ struct h264_fb { > > /** > * struct h264_ring_fb_list - ring frame buffer list > - * @fb_list : frame buffer arrary > + * @fb_list : frame buffer array > * @read_idx : read index > * @write_idx : write index > * @count : buffer count in list > @@ -72,7 +72,7 @@ struct h264_ring_fb_list { > /** > * struct vdec_h264_dec_info - decode information > * @dpb_sz : decoding picture buffer size > - * @resolution_changed : resoltion change happen > + * @resolution_changed : resolution change happen > * @realloc_mv_buf : flag to notify driver to re-allocate mv buffer > * @reserved : for 8 bytes alignment > * @bs_dma : Input bit-stream buffer dma address > diff --git a/drivers/media/platform/mtk-vcodec/vdec/vdec_vp8_if.c b/drivers/media/platform/mtk-vcodec/vdec/vdec_vp8_if.c > index 3e84a761db3a..bac3723038de 100644 > --- a/drivers/media/platform/mtk-vcodec/vdec/vdec_vp8_if.c > +++ b/drivers/media/platform/mtk-vcodec/vdec/vdec_vp8_if.c > @@ -120,7 +120,7 @@ struct vdec_vp8_hw_reg_base { > /** > * struct vdec_vp8_vpu_inst - VPU instance for VP8 decode > * @wq_hd : Wait queue to wait VPU message ack > - * @signaled : 1 - Host has received ack message from VPU, 0 - not recevie > + * @signaled : 1 - Host has received ack message from VPU, 0 - not receive > * @failure : VPU execution result status 0 - success, others - fail > * @inst_addr : VPU decoder instance address > */ > diff --git a/drivers/media/platform/mtk-vcodec/vdec_drv_if.h b/drivers/media/platform/mtk-vcodec/vdec_drv_if.h > index ded1154481cd..9a21591f3818 100644 > --- a/drivers/media/platform/mtk-vcodec/vdec_drv_if.h > +++ b/drivers/media/platform/mtk-vcodec/vdec_drv_if.h > @@ -80,7 +80,7 @@ void vdec_if_deinit(struct mtk_vcodec_ctx *ctx); > * vdec_if_decode() - trigger decode > * @ctx : [in] v4l2 context > * @bs : [in] input bitstream > - * @fb : [in] frame buffer to store decoded frame, when null menas parse > + * @fb : [in] frame buffer to store decoded frame, when null means parse > * header only > * @res_chg : [out] resolution change happens if current bs have different > * picture width/height > diff --git a/drivers/media/platform/mtk-vcodec/vdec_vpu_if.h b/drivers/media/platform/mtk-vcodec/vdec_vpu_if.h > index cd37bb2a610f..79d8eac7f5e2 100644 > --- a/drivers/media/platform/mtk-vcodec/vdec_vpu_if.h > +++ b/drivers/media/platform/mtk-vcodec/vdec_vpu_if.h > @@ -62,7 +62,7 @@ int vpu_dec_start(struct vdec_vpu_inst *vpu, uint32_t *data, unsigned int len); > /** > * vpu_dec_end - end decoding, basically the function will be invoked once > * when HW decoding done interrupt received successfully. The > - * decoder in VPU will continute to do referene frame management > + * decoder in VPU will continue to do reference frame management > * and check if there is a new decoded frame available to display. > * > * @vpu : instance for vdec_vpu_inst > diff --git a/drivers/media/platform/omap/omap_vout.c b/drivers/media/platform/omap/omap_vout.c > index ff3de2dce5a2..37f0d7146dfa 100644 > --- a/drivers/media/platform/omap/omap_vout.c > +++ b/drivers/media/platform/omap/omap_vout.c > @@ -1129,7 +1129,7 @@ static int vidioc_s_fmt_vid_out(struct file *file, void *fh, > } > timing = &dssdev->panel.timings; > > - /* We dont support RGB24-packed mode if vrfb rotation > + /* We don't support RGB24-packed mode if vrfb rotation > * is enabled*/ > if ((is_rotation_enabled(vout)) && > f->fmt.pix.pixelformat == V4L2_PIX_FMT_RGB24) { > @@ -1147,7 +1147,7 @@ static int vidioc_s_fmt_vid_out(struct file *file, void *fh, > vout->fbuf.fmt.width = timing->x_res; > } > > - /* change to samller size is OK */ > + /* change to smaller size is OK */ > > bpp = omap_vout_try_format(&f->fmt.pix); > f->fmt.pix.sizeimage = f->fmt.pix.width * f->fmt.pix.height * bpp; > diff --git a/drivers/media/platform/omap/omap_voutdef.h b/drivers/media/platform/omap/omap_voutdef.h > index 56b630b1c8b4..c740393c8509 100644 > --- a/drivers/media/platform/omap/omap_voutdef.h > +++ b/drivers/media/platform/omap/omap_voutdef.h > @@ -37,7 +37,7 @@ > #define VID_MAX_WIDTH 1280 /* Largest width */ > #define VID_MAX_HEIGHT 720 /* Largest height */ > > -/* Mimimum requirement is 2x2 for DSS */ > +/* Minimum requirement is 2x2 for DSS */ > #define VID_MIN_WIDTH 2 > #define VID_MIN_HEIGHT 2 > > @@ -135,7 +135,7 @@ struct omap_vout_device { > enum omap_color_mode dss_mode; > > /* we don't allow to request new buffer when old buffers are > - * still mmaped > + * still mmapped > */ > int mmap_count; > > diff --git a/drivers/media/platform/omap3isp/isp.c b/drivers/media/platform/omap3isp/isp.c > index 13f2828d880d..bd57174d81a7 100644 > --- a/drivers/media/platform/omap3isp/isp.c > +++ b/drivers/media/platform/omap3isp/isp.c > @@ -1517,7 +1517,7 @@ void omap3isp_print_status(struct isp_device *isp) > * > * To solve this problem power management support is split into prepare/complete > * and suspend/resume operations. The pipelines are stopped in prepare() and the > - * ISP clocks get disabled in suspend(). Similarly, the clocks are reenabled in > + * ISP clocks get disabled in suspend(). Similarly, the clocks are re-enabled in > * resume(), and the the pipelines are restarted in complete(). > * > * TODO: PM dependencies between the ISP and sensors are not modelled explicitly > diff --git a/drivers/media/platform/omap3isp/ispccdc.c b/drivers/media/platform/omap3isp/ispccdc.c > index 14a1c24037c4..261ad1175f98 100644 > --- a/drivers/media/platform/omap3isp/ispccdc.c > +++ b/drivers/media/platform/omap3isp/ispccdc.c > @@ -1594,7 +1594,7 @@ static int ccdc_isr_buffer(struct isp_ccdc_device *ccdc) > return 0; > > /* We're in continuous mode, and memory writes were disabled due to a > - * buffer underrun. Reenable them now that we have a buffer. The buffer > + * buffer underrun. Re-enable them now that we have a buffer. The buffer > * address has been set in ccdc_video_queue. > */ > if (ccdc->state == ISP_PIPELINE_STREAM_CONTINUOUS && ccdc->underrun) { > @@ -1712,7 +1712,7 @@ static void ccdc_vd1_isr(struct isp_ccdc_device *ccdc) > * data to memory the CCDC and LSC are stopped immediately but > * without change the CCDC stopping state machine. The CCDC > * stopping state machine should be used only when user request > - * for stopping is received (SINGLESHOT is an exeption). > + * for stopping is received (SINGLESHOT is an exception). > */ > switch (ccdc->state) { > case ISP_PIPELINE_STREAM_SINGLESHOT: > diff --git a/drivers/media/platform/omap3isp/ispcsi2.c b/drivers/media/platform/omap3isp/ispcsi2.c > index 9c180f607bcb..da66ea65be5d 100644 > --- a/drivers/media/platform/omap3isp/ispcsi2.c > +++ b/drivers/media/platform/omap3isp/ispcsi2.c > @@ -710,7 +710,7 @@ static void csi2_isr_ctx(struct isp_csi2_device *csi2, > > /* Skip interrupts until we reach the frame skip count. The CSI2 will be > * automatically disabled, as the frame skip count has been programmed > - * in the CSI2_CTx_CTRL1::COUNT field, so reenable it. > + * in the CSI2_CTx_CTRL1::COUNT field, so re-enable it. > * > * It would have been nice to rely on the FRAME_NUMBER interrupt instead > * but it turned out that the interrupt is only generated when the CSI2 > diff --git a/drivers/media/platform/pxa_camera.c b/drivers/media/platform/pxa_camera.c > index 3cf3c6390cc8..4fe228752a43 100644 > --- a/drivers/media/platform/pxa_camera.c > +++ b/drivers/media/platform/pxa_camera.c > @@ -1631,7 +1631,7 @@ static int pxa_camera_set_bus_param(struct pxa_camera_dev *pcdev) > > pcdev->channels = 1; > > - /* Make choises, based on platform preferences */ > + /* Make choices, based on platform preferences */ > if ((common_flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH) && > (common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)) { > if (pcdev->platform_flags & PXA_CAMERA_HSP) > diff --git a/drivers/media/platform/qcom/venus/core.h b/drivers/media/platform/qcom/venus/core.h > index 79c7e816c706..7a3feb5cee00 100644 > --- a/drivers/media/platform/qcom/venus/core.h > +++ b/drivers/media/platform/qcom/venus/core.h > @@ -219,7 +219,7 @@ struct venus_buffer { > #define to_venus_buffer(ptr) container_of(ptr, struct venus_buffer, vb) > > /** > - * struct venus_inst - holds per instance paramerters > + * struct venus_inst - holds per instance parameters > * > * @list: used for attach an instance to the core > * @lock: instance lock > diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c > index beb9248992a4..2207a31d355e 100644 > --- a/drivers/media/platform/rcar-vin/rcar-dma.c > +++ b/drivers/media/platform/rcar-vin/rcar-dma.c > @@ -681,7 +681,7 @@ static int rvin_setup(struct rvin_dev *vin) > break; > } > > - /* Enable VSYNC Field Toogle mode after one VSYNC input */ > + /* Enable VSYNC Field Toggle mode after one VSYNC input */ > if (vin->info->model == RCAR_GEN3) > dmr2 = VNDMR2_FTEV; > else > diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c > index 7a2851790b91..7cbdcbf9b090 100644 > --- a/drivers/media/platform/rcar-vin/rcar-v4l2.c > +++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c > @@ -665,7 +665,7 @@ static void rvin_mc_try_format(struct rvin_dev *vin, > * The V4L2 specification clearly documents the colorspace fields > * as being set by drivers for capture devices. Using the values > * supplied by userspace thus wouldn't comply with the API. Until > - * the API is updated force fixed vaules. > + * the API is updated force fixed values. > */ > pix->colorspace = RVIN_DEFAULT_COLORSPACE; > pix->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(pix->colorspace); > @@ -964,7 +964,7 @@ void rvin_v4l2_unregister(struct rvin_dev *vin) > v4l2_info(&vin->v4l2_dev, "Removing %s\n", > video_device_node_name(&vin->vdev)); > > - /* Checks internaly if vdev have been init or not */ > + /* Checks internally if vdev have been init or not */ > video_unregister_device(&vin->vdev); > } > > diff --git a/drivers/media/platform/rockchip/rga/rga-hw.c b/drivers/media/platform/rockchip/rga/rga-hw.c > index 96d1b1b3fe8e..843e50d17a72 100644 > --- a/drivers/media/platform/rockchip/rga/rga-hw.c > +++ b/drivers/media/platform/rockchip/rga/rga-hw.c > @@ -256,7 +256,7 @@ static void rga_cmd_set_trans_info(struct rga_ctx *ctx) > } > > /* > - * Cacluate the up/down scaling mode/factor. > + * Calculate the up/down scaling mode/factor. > * > * RGA used to scale the picture first, and then rotate second, > * so we need to swap the w/h when rotate degree is 90/270. > @@ -304,7 +304,7 @@ static void rga_cmd_set_trans_info(struct rga_ctx *ctx) > } > > /* > - * Cacluate the framebuffer virtual strides and active size, > + * Calculate the framebuffer virtual strides and active size, > * note that the step of vir_stride / vir_width is 4 byte words > */ > src_vir_info.data.vir_stride = ctx->in.stride >> 2; > @@ -318,7 +318,7 @@ static void rga_cmd_set_trans_info(struct rga_ctx *ctx) > dst_act_info.data.act_width = dst_w - 1; > > /* > - * Cacluate the source framebuffer base address with offset pixel. > + * Calculate the source framebuffer base address with offset pixel. > */ > src_offsets = rga_get_addr_offset(&ctx->in, src_x, src_y, > src_w, src_h); > diff --git a/drivers/media/platform/s3c-camif/camif-core.h b/drivers/media/platform/s3c-camif/camif-core.h > index 1f5c8c94ce89..be5e7357dffc 100644 > --- a/drivers/media/platform/s3c-camif/camif-core.h > +++ b/drivers/media/platform/s3c-camif/camif-core.h > @@ -260,7 +260,7 @@ struct camif_vp { > * @clock: clocks required for the CAMIF operation > * @lock: mutex protecting this data structure > * @slock: spinlock protecting CAMIF registers > - * @io_base: start address of the mmaped CAMIF registers > + * @io_base: start address of the mmapped CAMIF registers > */ > struct camif_dev { > struct media_device media_dev; > diff --git a/drivers/media/platform/s5p-jpeg/jpeg-core.h b/drivers/media/platform/s5p-jpeg/jpeg-core.h > index 90fda4b720eb..144c102ff05f 100644 > --- a/drivers/media/platform/s5p-jpeg/jpeg-core.h > +++ b/drivers/media/platform/s5p-jpeg/jpeg-core.h > @@ -153,7 +153,7 @@ struct s5p_jpeg_variant { > > /** > * struct jpeg_fmt - driver's internal color format data > - * @name: format descritpion > + * @name: format description > * @fourcc: the fourcc code, 0 if not applicable > * @depth: number of bits per pixel > * @colplanes: number of color planes (1 for packed formats) > @@ -193,7 +193,7 @@ struct s5p_jpeg_marker { > * @sos: SOS marker's position relative to the buffer beginning > * @dht: DHT markers' positions relative to the buffer beginning > * @dqt: DQT markers' positions relative to the buffer beginning > - * @sof: SOF0 marker's postition relative to the buffer beginning > + * @sof: SOF0 marker's position relative to the buffer beginning > * @sof_len: SOF0 marker's payload length (without length field itself) > * @components: number of image components > * @size: image buffer size in bytes > diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h > index 20442a9b9f7a..24148020baa9 100644 > --- a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h > +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h > @@ -268,7 +268,7 @@ struct s5p_mfc_priv_buf { > * @enc_ctrl_handler: control framework handler for encoding > * @pm: power management control > * @variant: MFC hardware variant information > - * @num_inst: couter of active MFC instances > + * @num_inst: counter of active MFC instances > * @irqlock: lock for operations on videobuf2 queues > * @condlock: lock for changing/checking if a context is ready to be > * processed > diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c > index ee7b15b335e0..9f832ba7bc8c 100644 > --- a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c > +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c > @@ -51,7 +51,7 @@ int s5p_mfc_load_firmware(struct s5p_mfc_dev *dev) > struct firmware *fw_blob; > int i, err = -EINVAL; > > - /* Firmare has to be present as a separate file or compiled > + /* Firmware has to be present as a separate file or compiled > * into kernel. */ > mfc_debug_enter(); > > diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c > index f4c0e3a8f27d..e111f9c47179 100644 > --- a/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c > +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c > @@ -602,7 +602,7 @@ static int vidioc_querybuf(struct file *file, void *priv, > int i; > > if (buf->memory != V4L2_MEMORY_MMAP) { > - mfc_err("Only mmaped buffers can be used\n"); > + mfc_err("Only mmapped buffers can be used\n"); > return -EINVAL; > } > mfc_debug(2, "State: %d, buf->type: %d\n", ctx->state, buf->type); > diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c > index 0913881219ff..6144e95f6425 100644 > --- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c > +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c > @@ -1293,7 +1293,7 @@ static int s5p_mfc_run_init_dec_buffers(struct s5p_mfc_ctx *ctx) > * First set the output frame buffers > */ > if (ctx->capture_state != QUEUE_BUFS_MMAPED) { > - mfc_err("It seems that not all destination buffers were mmaped\nMFC requires that all destination are mmaped before starting processing\n"); > + mfc_err("It seems that not all destination buffers were mmapped\nMFC requires that all destination are mmapped before starting processing\n"); > return -EAGAIN; > } > if (list_empty(&ctx->src_queue)) { > diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c > index 7c629be43205..281699ab7fe1 100644 > --- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c > +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c > @@ -53,7 +53,7 @@ static int s5p_mfc_alloc_dec_temp_buffers_v6(struct s5p_mfc_ctx *ctx) > return 0; > } > > -/* Release temproary buffers for decoding */ > +/* Release temporary buffers for decoding */ > static void s5p_mfc_release_dec_desc_buffer_v6(struct s5p_mfc_ctx *ctx) > { > /* NOP */ > @@ -1928,7 +1928,7 @@ static inline int s5p_mfc_run_init_dec_buffers(struct s5p_mfc_ctx *ctx) > > if (ctx->capture_state != QUEUE_BUFS_MMAPED) { > mfc_err("It seems that not all destination buffers were\n" > - "mmaped.MFC requires that all destination are mmaped\n" > + "mmapped.MFC requires that all destination are mmapped\n" > "before starting processing.\n"); > return -EAGAIN; > } > diff --git a/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.h b/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.h > index 3dbb3a287cc0..c9d6021904cd 100644 > --- a/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.h > +++ b/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.h > @@ -193,7 +193,7 @@ struct c8sectpfei { > #define C8SECTPFE_SYS_ENABLE BIT(0) > > /* > - * Ponter record data structure required for each input block > + * Pointer record data structure required for each input block > * see Table 82 on page 167 of functional specification. > */ > > diff --git a/drivers/media/platform/sti/delta/delta.h b/drivers/media/platform/sti/delta/delta.h > index 2ba99922c05b..914556030e70 100644 > --- a/drivers/media/platform/sti/delta/delta.h > +++ b/drivers/media/platform/sti/delta/delta.h > @@ -286,7 +286,7 @@ struct delta_dec { > * Header parsing must be done using decode(), giving > * explicitly header access unit or first access unit of bitstream. > * If no valid header is found, get_streaminfo will return -ENODATA, > - * in this case the next bistream access unit must be decoded till > + * in this case the next bitstream access unit must be decoded till > * get_streaminfo becomes successful. > */ > int (*get_streaminfo)(struct delta_ctx *ctx, > diff --git a/drivers/media/platform/sti/hva/hva-h264.c b/drivers/media/platform/sti/hva/hva-h264.c > index b61a5d337d2a..c34f7cf5aed2 100644 > --- a/drivers/media/platform/sti/hva/hva-h264.c > +++ b/drivers/media/platform/sti/hva/hva-h264.c > @@ -626,7 +626,7 @@ static int hva_h264_prepare_task(struct hva_ctx *pctx, > td->frame_width = frame_width; > td->frame_height = frame_height; > > - /* set frame alignement */ > + /* set frame alignment */ > td->window_width = frame_width; > td->window_height = frame_height; > td->window_horizontal_offset = 0; > diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c > index 6732874114cf..5fe5b38fa901 100644 > --- a/drivers/media/platform/stm32/stm32-dcmi.c > +++ b/drivers/media/platform/stm32/stm32-dcmi.c > @@ -1544,7 +1544,7 @@ static void dcmi_graph_notify_unbind(struct v4l2_async_notifier *notifier, > > dev_dbg(dcmi->dev, "Removing %s\n", video_device_node_name(dcmi->vdev)); > > - /* Checks internaly if vdev has been init or not */ > + /* Checks internally if vdev has been init or not */ > video_unregister_device(dcmi->vdev); > } > > diff --git a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h > index 0bb000712c33..85f97d4f086e 100644 > --- a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h > +++ b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h > @@ -65,7 +65,7 @@ bool sun6i_csi_is_format_supported(struct sun6i_csi *csi, u32 pixformat, > int sun6i_csi_set_power(struct sun6i_csi *csi, bool enable); > > /** > - * sun6i_csi_update_config() - update the csi register setttings > + * sun6i_csi_update_config() - update the csi register settings > * @csi: pointer to the csi > * @config: see struct sun6i_csi_config > */ > diff --git a/drivers/media/platform/ti-vpe/vpdma.c b/drivers/media/platform/ti-vpe/vpdma.c > index e2cf2b90e500..1da2cb3aaf0c 100644 > --- a/drivers/media/platform/ti-vpe/vpdma.c > +++ b/drivers/media/platform/ti-vpe/vpdma.c > @@ -404,7 +404,7 @@ EXPORT_SYMBOL(vpdma_map_desc_buf); > > /* > * unmap descriptor/payload DMA buffer, disabling DMA access and > - * allowing the main processor to acces the data > + * allowing the main processor to access the data > */ > void vpdma_unmap_desc_buf(struct vpdma_data *vpdma, struct vpdma_buf *buf) > { > @@ -501,7 +501,7 @@ void vpdma_reset_desc_list(struct vpdma_desc_list *list) > EXPORT_SYMBOL(vpdma_reset_desc_list); > > /* > - * free the buffer allocated fot the VPDMA descriptor list, this should be > + * free the buffer allocated for the VPDMA descriptor list, this should be > * called when the user doesn't want to use VPDMA any more. > */ > void vpdma_free_desc_list(struct vpdma_desc_list *list) > @@ -790,7 +790,7 @@ static void dump_dtd(struct vpdma_dtd *dtd) > * append an outbound data transfer descriptor to the given descriptor list, > * this sets up a 'client to memory' VPDMA transfer for the given VPDMA channel > * > - * @list: vpdma desc list to which we add this decriptor > + * @list: vpdma desc list to which we add this descriptor > * @width: width of the image in pixels in memory > * @c_rect: compose params of output image > * @fmt: vpdma data format of the buffer > @@ -798,7 +798,7 @@ static void dump_dtd(struct vpdma_dtd *dtd) > * max_width: enum for maximum width of data transfer > * max_height: enum for maximum height of data transfer > * chan: VPDMA channel > - * flags: VPDMA flags to configure some descriptor fileds > + * flags: VPDMA flags to configure some descriptor fields > */ > void vpdma_add_out_dtd(struct vpdma_desc_list *list, int width, > int stride, const struct v4l2_rect *c_rect, > @@ -863,14 +863,14 @@ EXPORT_SYMBOL(vpdma_rawchan_add_out_dtd); > * append an inbound data transfer descriptor to the given descriptor list, > * this sets up a 'memory to client' VPDMA transfer for the given VPDMA channel > * > - * @list: vpdma desc list to which we add this decriptor > + * @list: vpdma desc list to which we add this descriptor > * @width: width of the image in pixels in memory(not the cropped width) > * @c_rect: crop params of input image > * @fmt: vpdma data format of the buffer > * dma_addr: dma address as seen by VPDMA > * chan: VPDMA channel > * field: top or bottom field info of the input image > - * flags: VPDMA flags to configure some descriptor fileds > + * flags: VPDMA flags to configure some descriptor fields > * frame_width/height: the complete width/height of the image presented to the > * client (this makes sense when multiple channels are > * connected to the same client, forming a larger frame) > @@ -1008,7 +1008,7 @@ unsigned int vpdma_get_list_mask(struct vpdma_data *vpdma, int irq_num) > } > EXPORT_SYMBOL(vpdma_get_list_mask); > > -/* clear previosuly occured list intterupts in the LIST_STAT register */ > +/* clear previously occurred list interupts in the LIST_STAT register */ > void vpdma_clear_list_stat(struct vpdma_data *vpdma, int irq_num, > int list_num) > { > diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c > index d70871d0ad2d..207e7e76c048 100644 > --- a/drivers/media/platform/ti-vpe/vpe.c > +++ b/drivers/media/platform/ti-vpe/vpe.c > @@ -876,7 +876,7 @@ static int set_srcdst_params(struct vpe_ctx *ctx) > /* > * we make sure that the source image has a 16 byte aligned > * stride, we need to do the same for the motion vector buffer > - * by aligning it's stride to the next 16 byte boundry. this > + * by aligning it's stride to the next 16 byte boundary. this > * extra space will not be used by the de-interlacer, but will > * ensure that vpdma operates correctly > */ > diff --git a/drivers/media/platform/vsp1/vsp1_brx.c b/drivers/media/platform/vsp1/vsp1_brx.c > index 5e50178b057d..58ad248cd7f7 100644 > --- a/drivers/media/platform/vsp1/vsp1_brx.c > +++ b/drivers/media/platform/vsp1/vsp1_brx.c > @@ -296,7 +296,7 @@ static void brx_configure_stream(struct vsp1_entity *entity, > /* > * The hardware is extremely flexible but we have no userspace API to > * expose all the parameters, nor is it clear whether we would have use > - * cases for all the supported modes. Let's just harcode the parameters > + * cases for all the supported modes. Let's just hardcode the parameters > * to sane default values for now. > */ > > @@ -373,7 +373,7 @@ static void brx_configure_stream(struct vsp1_entity *entity, > vsp1_brx_write(brx, dlb, VI6_BRU_CTRL(i), ctrl); > > /* > - * Harcode the blending formula to > + * Hardcode the blending formula to > * > * DSTc = DSTc * (1 - SRCa) + SRCc * SRCa > * DSTa = DSTa * (1 - SRCa) + SRCa > diff --git a/drivers/media/platform/xilinx/xilinx-vip.c b/drivers/media/platform/xilinx/xilinx-vip.c > index 18f98838111b..08a825c3a3f6 100644 > --- a/drivers/media/platform/xilinx/xilinx-vip.c > +++ b/drivers/media/platform/xilinx/xilinx-vip.c > @@ -166,7 +166,7 @@ EXPORT_SYMBOL_GPL(xvip_set_format_size); > * the register, otherwise the bitmask is cleared from the register > * when the flag @set is false. > * > - * Fox eample, this function can be used to set a control with a boolean value > + * Fox example, this function can be used to set a control with a boolean value > * requested by users. If the caller knows whether to set or clear in the first > * place, the caller should call xvip_clr() or xvip_set() directly instead of > * using this function. >
Hi Mauro, On Mon, Feb 18, 2019 at 7:29 PM Mauro Carvalho Chehab <mchehab+samsung@kernel.org> wrote: > > Use codespell to fix lots of typos over frontends. > > Manually verified to avoid false-positives. > > Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> > --- > drivers/media/platform/Kconfig | 2 +- > drivers/media/platform/atmel/atmel-isi.c | 4 ++-- > drivers/media/platform/coda/coda-jpeg.c | 2 +- > drivers/media/platform/davinci/isif.c | 4 ++-- > drivers/media/platform/davinci/vpbe.c | 2 +- > drivers/media/platform/davinci/vpif.c | 2 +- > drivers/media/platform/davinci/vpif_display.c | 4 ++-- > .../media/platform/exynos4-is/fimc-is-command.h | 2 +- > drivers/media/platform/exynos4-is/fimc-is-param.h | 2 +- > drivers/media/platform/exynos4-is/media-dev.h | 2 +- > drivers/media/platform/exynos4-is/mipi-csis.c | 4 ++-- > drivers/media/platform/marvell-ccic/mmp-driver.c | 4 ++-- > drivers/media/platform/mtk-mdp/mtk_mdp_core.h | 6 +++--- > drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c | 2 +- > drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h | 4 ++-- > drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c | 2 +- > .../media/platform/mtk-vcodec/vdec/vdec_h264_if.c | 4 ++-- > .../media/platform/mtk-vcodec/vdec/vdec_vp8_if.c | 2 +- > drivers/media/platform/mtk-vcodec/vdec_drv_if.h | 2 +- > drivers/media/platform/mtk-vcodec/vdec_vpu_if.h | 2 +- > drivers/media/platform/omap/omap_vout.c | 4 ++-- > drivers/media/platform/omap/omap_voutdef.h | 4 ++-- > drivers/media/platform/omap3isp/isp.c | 2 +- > drivers/media/platform/omap3isp/ispccdc.c | 4 ++-- > drivers/media/platform/omap3isp/ispcsi2.c | 2 +- > drivers/media/platform/pxa_camera.c | 2 +- > drivers/media/platform/qcom/venus/core.h | 2 +- > drivers/media/platform/rcar-vin/rcar-dma.c | 2 +- > drivers/media/platform/rcar-vin/rcar-v4l2.c | 4 ++-- > drivers/media/platform/rockchip/rga/rga-hw.c | 6 +++--- > drivers/media/platform/s3c-camif/camif-core.h | 2 +- > drivers/media/platform/s5p-jpeg/jpeg-core.h | 4 ++-- > drivers/media/platform/s5p-mfc/s5p_mfc_common.h | 2 +- > drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c | 2 +- > drivers/media/platform/s5p-mfc/s5p_mfc_dec.c | 2 +- > drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c | 2 +- > drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c | 4 ++-- > .../media/platform/sti/c8sectpfe/c8sectpfe-core.h | 2 +- > drivers/media/platform/sti/delta/delta.h | 2 +- > drivers/media/platform/sti/hva/hva-h264.c | 2 +- > drivers/media/platform/stm32/stm32-dcmi.c | 2 +- > drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h | 2 +- > drivers/media/platform/ti-vpe/vpdma.c | 14 +++++++------- > drivers/media/platform/ti-vpe/vpe.c | 2 +- > drivers/media/platform/vsp1/vsp1_brx.c | 4 ++-- > drivers/media/platform/xilinx/xilinx-vip.c | 2 +- > 46 files changed, 70 insertions(+), 70 deletions(-) > For drivers/media/platform/davinci/* Reviewed-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Regards, Prabhakar
On Mon, Feb 18, 2019 at 02:29:00PM -0500, Mauro Carvalho Chehab wrote: > Use codespell to fix lots of typos over frontends. > > Manually verified to avoid false-positives. > > Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> [...] > diff --git a/drivers/media/platform/coda/coda-jpeg.c b/drivers/media/platform/coda/coda-jpeg.c > index 9f899a6cefed..39a2351c1e48 100644 > --- a/drivers/media/platform/coda/coda-jpeg.c > +++ b/drivers/media/platform/coda/coda-jpeg.c > @@ -103,7 +103,7 @@ static const unsigned char chroma_ac_value[162 + 2] = { > > /* > * Quantization tables for luminance and chrominance components in > - * zig-zag scan order from the Freescale i.MX VPU libaries > + * zig-zag scan order from the Freescale i.MX VPU libraries > */ > > static unsigned char luma_q[64] = { Thank you, for coda Acked-by: Philipp Zabel <p.zabel@pengutronix.de> regards Philipp
Hi Mauro, On Tue, 2019-02-19 at 03:29 +0800, Mauro Carvalho Chehab wrote: > drivers/media/platform/mtk-mdp/mtk_mdp_core.h | 6 +++--- For drivers/media/platform/mtk-mdp/* Reviewed-by: Houlong Wei <houlong.wei@mediatek.com> Thanks a lot.
Hi Mauro, On Mon, 18 Feb 2019 14:29:00 -0500 Mauro Carvalho Chehab <mchehab+samsung@kernel.org> wrote: > Use codespell to fix lots of typos over frontends. > > Manually verified to avoid false-positives. > > Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> > --- > drivers/media/platform/Kconfig | 2 +- > drivers/media/platform/atmel/atmel-isi.c | 4 ++-- > drivers/media/platform/coda/coda-jpeg.c | 2 +- > drivers/media/platform/davinci/isif.c | 4 ++-- > drivers/media/platform/davinci/vpbe.c | 2 +- > drivers/media/platform/davinci/vpif.c | 2 +- > drivers/media/platform/davinci/vpif_display.c | 4 ++-- > .../media/platform/exynos4-is/fimc-is-command.h | 2 +- > drivers/media/platform/exynos4-is/fimc-is-param.h | 2 +- > drivers/media/platform/exynos4-is/media-dev.h | 2 +- > drivers/media/platform/exynos4-is/mipi-csis.c | 4 ++-- > drivers/media/platform/marvell-ccic/mmp-driver.c | 4 ++-- > drivers/media/platform/mtk-mdp/mtk_mdp_core.h | 6 +++--- > drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c | 2 +- > drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h | 4 ++-- > drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c | 2 +- > .../media/platform/mtk-vcodec/vdec/vdec_h264_if.c | 4 ++-- > .../media/platform/mtk-vcodec/vdec/vdec_vp8_if.c | 2 +- > drivers/media/platform/mtk-vcodec/vdec_drv_if.h | 2 +- > drivers/media/platform/mtk-vcodec/vdec_vpu_if.h | 2 +- > drivers/media/platform/omap/omap_vout.c | 4 ++-- > drivers/media/platform/omap/omap_voutdef.h | 4 ++-- > drivers/media/platform/omap3isp/isp.c | 2 +- > drivers/media/platform/omap3isp/ispccdc.c | 4 ++-- > drivers/media/platform/omap3isp/ispcsi2.c | 2 +- > drivers/media/platform/pxa_camera.c | 2 +- > drivers/media/platform/qcom/venus/core.h | 2 +- > drivers/media/platform/rcar-vin/rcar-dma.c | 2 +- > drivers/media/platform/rcar-vin/rcar-v4l2.c | 4 ++-- > drivers/media/platform/rockchip/rga/rga-hw.c | 6 +++--- > drivers/media/platform/s3c-camif/camif-core.h | 2 +- > drivers/media/platform/s5p-jpeg/jpeg-core.h | 4 ++-- > drivers/media/platform/s5p-mfc/s5p_mfc_common.h | 2 +- > drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c | 2 +- > drivers/media/platform/s5p-mfc/s5p_mfc_dec.c | 2 +- > drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c | 2 +- > drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c | 4 ++-- > .../media/platform/sti/c8sectpfe/c8sectpfe-core.h | 2 +- > drivers/media/platform/sti/delta/delta.h | 2 +- > drivers/media/platform/sti/hva/hva-h264.c | 2 +- > drivers/media/platform/stm32/stm32-dcmi.c | 2 +- > drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h | 2 +- > drivers/media/platform/ti-vpe/vpdma.c | 14 +++++++------- > drivers/media/platform/ti-vpe/vpe.c | 2 +- > drivers/media/platform/vsp1/vsp1_brx.c | 4 ++-- > drivers/media/platform/xilinx/xilinx-vip.c | 2 +- > 46 files changed, 70 insertions(+), 70 deletions(-) For drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h Reviewed-by: Yong Deng <yong.deng@magewell.com> Thanks, Yong
diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig index 6cff26b29a38..4acbed189644 100644 --- a/drivers/media/platform/Kconfig +++ b/drivers/media/platform/Kconfig @@ -668,7 +668,7 @@ menuconfig SDR_PLATFORM_DRIVERS if SDR_PLATFORM_DRIVERS config VIDEO_RCAR_DRIF - tristate "Renesas Digitial Radio Interface (DRIF)" + tristate "Renesas Digital Radio Interface (DRIF)" depends on VIDEO_V4L2 depends on ARCH_RENESAS || COMPILE_TEST select VIDEOBUF2_VMALLOC diff --git a/drivers/media/platform/atmel/atmel-isi.c b/drivers/media/platform/atmel/atmel-isi.c index fdb255e4a956..08b8d5583080 100644 --- a/drivers/media/platform/atmel/atmel-isi.c +++ b/drivers/media/platform/atmel/atmel-isi.c @@ -110,7 +110,7 @@ struct atmel_isi { bool enable_preview_path; struct completion complete; - /* ISI peripherial clock */ + /* ISI peripheral clock */ struct clk *pclk; unsigned int irq; @@ -1078,7 +1078,7 @@ static void isi_graph_notify_unbind(struct v4l2_async_notifier *notifier, dev_dbg(isi->dev, "Removing %s\n", video_device_node_name(isi->vdev)); - /* Checks internaly if vdev have been init or not */ + /* Checks internally if vdev have been init or not */ video_unregister_device(isi->vdev); } diff --git a/drivers/media/platform/coda/coda-jpeg.c b/drivers/media/platform/coda/coda-jpeg.c index 9f899a6cefed..39a2351c1e48 100644 --- a/drivers/media/platform/coda/coda-jpeg.c +++ b/drivers/media/platform/coda/coda-jpeg.c @@ -103,7 +103,7 @@ static const unsigned char chroma_ac_value[162 + 2] = { /* * Quantization tables for luminance and chrominance components in - * zig-zag scan order from the Freescale i.MX VPU libaries + * zig-zag scan order from the Freescale i.MX VPU libraries */ static unsigned char luma_q[64] = { diff --git a/drivers/media/platform/davinci/isif.c b/drivers/media/platform/davinci/isif.c index 340f8218f54d..47cecd10eb9f 100644 --- a/drivers/media/platform/davinci/isif.c +++ b/drivers/media/platform/davinci/isif.c @@ -328,7 +328,7 @@ static void isif_config_bclamp(struct isif_black_clamp *bc) if (bc->en) { val = bc->bc_mode_color << ISIF_BC_MODE_COLOR_SHIFT; - /* Enable BC and horizontal clamp caculation paramaters */ + /* Enable BC and horizontal clamp calculation parameters */ val = val | 1 | (bc->horz.mode << ISIF_HORZ_BC_MODE_SHIFT); regw(val, CLAMPCFG); @@ -358,7 +358,7 @@ static void isif_config_bclamp(struct isif_black_clamp *bc) regw(bc->horz.win_start_v_calc, CLHWIN2); } - /* vertical clamp caculation paramaters */ + /* vertical clamp calculation parameters */ /* Reset clamp value sel for previous line */ val |= diff --git a/drivers/media/platform/davinci/vpbe.c b/drivers/media/platform/davinci/vpbe.c index 4766a7a23d16..8339163a5231 100644 --- a/drivers/media/platform/davinci/vpbe.c +++ b/drivers/media/platform/davinci/vpbe.c @@ -242,7 +242,7 @@ static int vpbe_set_output(struct vpbe_device *vpbe_dev, int index) goto unlock; /* - * It is assumed that venc or extenal encoder will set a default + * It is assumed that venc or external encoder will set a default * mode in the sub device. For external encoder or LCD pannel output, * we also need to set up the lcd port for the required mode. So setup * the lcd port for the default mode that is configured in the board diff --git a/drivers/media/platform/davinci/vpif.c b/drivers/media/platform/davinci/vpif.c index 16352e2263d2..df66461f5d4f 100644 --- a/drivers/media/platform/davinci/vpif.c +++ b/drivers/media/platform/davinci/vpif.c @@ -1,7 +1,7 @@ /* * vpif - Video Port Interface driver * VPIF is a receiver and transmitter for video data. It has two channels(0, 1) - * that receiveing video byte stream and two channels(2, 3) for video output. + * that receiving video byte stream and two channels(2, 3) for video output. * The hardware supports SDTV, HDTV formats, raw data capture. * Currently, the driver supports NTSC and PAL standards. * diff --git a/drivers/media/platform/davinci/vpif_display.c b/drivers/media/platform/davinci/vpif_display.c index 3517487d9760..f4b4f2a1dfc0 100644 --- a/drivers/media/platform/davinci/vpif_display.c +++ b/drivers/media/platform/davinci/vpif_display.c @@ -138,7 +138,7 @@ static int vpif_buffer_queue_setup(struct vb2_queue *vq, * vpif_buffer_queue : Callback function to add buffer to DMA queue * @vb: ptr to vb2_buffer * - * This callback fucntion queues the buffer to DMA engine + * This callback function queues the buffer to DMA engine */ static void vpif_buffer_queue(struct vb2_buffer *vb) { @@ -635,7 +635,7 @@ static int vpif_try_fmt_vid_out(struct file *file, void *priv, struct v4l2_pix_format *pixfmt = &fmt->fmt.pix; /* - * to supress v4l-compliance warnings silently correct + * to suppress v4l-compliance warnings silently correct * the pixelformat */ if (pixfmt->pixelformat != V4L2_PIX_FMT_YUV422P) diff --git a/drivers/media/platform/exynos4-is/fimc-is-command.h b/drivers/media/platform/exynos4-is/fimc-is-command.h index 0d1f52e394b1..b06b56b890d5 100644 --- a/drivers/media/platform/exynos4-is/fimc-is-command.h +++ b/drivers/media/platform/exynos4-is/fimc-is-command.h @@ -18,7 +18,7 @@ #define FIMC_IS_COMMAND_VER 110 /* FIMC-IS command set version 1.10 */ -/* Enumeration of commands beetween the FIMC-IS and the host processor. */ +/* Enumeration of commands between the FIMC-IS and the host processor. */ /* HOST to FIMC-IS */ #define HIC_PREVIEW_STILL 0x0001 diff --git a/drivers/media/platform/exynos4-is/fimc-is-param.h b/drivers/media/platform/exynos4-is/fimc-is-param.h index 8e31f7642776..22923a3d405e 100644 --- a/drivers/media/platform/exynos4-is/fimc-is-param.h +++ b/drivers/media/platform/exynos4-is/fimc-is-param.h @@ -298,7 +298,7 @@ enum isp_af_mode { #define ISP_FLASH_COMMAND_AUTO 2 #define ISP_FLASH_COMMAND_TORCH 3 /* 3 sec */ -/* Flash red-eye commads */ +/* Flash red-eye commands */ #define ISP_FLASH_REDEYE_DISABLE 0 #define ISP_FLASH_REDEYE_ENABLE 1 diff --git a/drivers/media/platform/exynos4-is/media-dev.h b/drivers/media/platform/exynos4-is/media-dev.h index 9f527670395a..a7c9490bbcb4 100644 --- a/drivers/media/platform/exynos4-is/media-dev.h +++ b/drivers/media/platform/exynos4-is/media-dev.h @@ -79,7 +79,7 @@ struct fimc_camclk_info { /** * struct fimc_sensor_info - image data source subdev information - * @pdata: sensor's atrributes passed as media device's platform data + * @pdata: sensor's attributes passed as media device's platform data * @asd: asynchronous subdev registration data structure * @subdev: image sensor v4l2 subdev * @host: fimc device the sensor is currently linked to diff --git a/drivers/media/platform/exynos4-is/mipi-csis.c b/drivers/media/platform/exynos4-is/mipi-csis.c index 35cb0162085b..234e047e3e8f 100644 --- a/drivers/media/platform/exynos4-is/mipi-csis.c +++ b/drivers/media/platform/exynos4-is/mipi-csis.c @@ -183,7 +183,7 @@ struct csis_drvdata { * @index: the hardware instance index * @pdev: CSIS platform device * @phy: pointer to the CSIS generic PHY - * @regs: mmaped I/O registers memory + * @regs: mmapped I/O registers memory * @supplies: CSIS regulator supplies * @clock: CSIS clocks * @irq: requested s5p-mipi-csis irq number @@ -745,7 +745,7 @@ static int s5pcsis_parse_dt(struct platform_device *pdev, goto err; } - /* Get MIPI CSI-2 bus configration from the endpoint node. */ + /* Get MIPI CSI-2 bus configuration from the endpoint node. */ of_property_read_u32(node, "samsung,csis-hs-settle", &state->hs_settle); state->wclk_ext = of_property_read_bool(node, diff --git a/drivers/media/platform/marvell-ccic/mmp-driver.c b/drivers/media/platform/marvell-ccic/mmp-driver.c index 70a2833db0d1..af76eb637773 100644 --- a/drivers/media/platform/marvell-ccic/mmp-driver.c +++ b/drivers/media/platform/marvell-ccic/mmp-driver.c @@ -240,8 +240,8 @@ static void mmpcam_calc_dphy(struct mcam_camera *mcam) * bit 8 ~ bit 15: HS_SETTLE * Time interval during which the HS * receiver shall ignore any Data Lane - * HS transistions. - * The vaule has been calibrated on + * HS transitions. + * The value has been calibrated on * different boards. It seems to work well. * * More detail please refer diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_core.h b/drivers/media/platform/mtk-mdp/mtk_mdp_core.h index ad1cff306efd..e5abb1abb3a3 100644 --- a/drivers/media/platform/mtk-mdp/mtk_mdp_core.h +++ b/drivers/media/platform/mtk-mdp/mtk_mdp_core.h @@ -41,7 +41,7 @@ #define MTK_MDP_CTX_ERROR BIT(5) /** - * struct mtk_mdp_pix_align - alignement of image + * struct mtk_mdp_pix_align - alignment of image * @org_w: source alignment of width * @org_h: source alignment of height * @target_w: dst alignment of width @@ -122,8 +122,8 @@ struct mtk_mdp_frame { /** * struct mtk_mdp_variant - image processor variant information * @pix_max: maximum limit of image size - * @pix_min: minimun limit of image size - * @pix_align: alignement of image + * @pix_min: minimum limit of image size + * @pix_align: alignment of image * @h_scale_up_max: maximum scale-up in horizontal * @v_scale_up_max: maximum scale-up in vertical * @h_scale_down_max: maximum scale-down in horizontal diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c index ba619647bc10..794aba685120 100644 --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c @@ -1170,7 +1170,7 @@ static void vb2ops_vdec_buf_queue(struct vb2_buffer *vb) ret = vdec_if_decode(ctx, &src_mem, NULL, &res_chg); if (ret || !res_chg) { /* - * fb == NULL menas to parse SPS/PPS header or + * fb == NULL means to parse SPS/PPS header or * resolution info in src_mem. Decode can fail * if there is no SPS header or picture info * in bs diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h index 8aba69555b12..e7e2a108def9 100644 --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h @@ -151,9 +151,9 @@ struct mtk_q_data { * @intra_period: I frame period * @gop_size: group of picture size, it's used as the intra frame period * @framerate_num: frame rate numerator. ex: framerate_num=30 and - * framerate_denom=1 menas FPS is 30 + * framerate_denom=1 means FPS is 30 * @framerate_denom: frame rate denominator. ex: framerate_num=30 and - * framerate_denom=1 menas FPS is 30 + * framerate_denom=1 means FPS is 30 * @h264_max_qp: Max value for H.264 quantization parameter * @h264_profile: V4L2 defined H.264 profile * @h264_level: V4L2 defined H.264 level diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c index d1f12257bf66..2af654240d96 100644 --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c @@ -393,7 +393,7 @@ static void mtk_venc_set_param(struct mtk_vcodec_ctx *ctx, param->input_yuv_fmt = VENC_YUV_FORMAT_NV21; break; default: - mtk_v4l2_err("Unsupport fourcc =%d", q_data_src->fmt->fourcc); + mtk_v4l2_err("Unsupported fourcc =%d", q_data_src->fmt->fourcc); break; } param->h264_profile = enc_params->h264_profile; diff --git a/drivers/media/platform/mtk-vcodec/vdec/vdec_h264_if.c b/drivers/media/platform/mtk-vcodec/vdec/vdec_h264_if.c index aa3ce41898bc..02c960c63ac0 100644 --- a/drivers/media/platform/mtk-vcodec/vdec/vdec_h264_if.c +++ b/drivers/media/platform/mtk-vcodec/vdec/vdec_h264_if.c @@ -55,7 +55,7 @@ struct h264_fb { /** * struct h264_ring_fb_list - ring frame buffer list - * @fb_list : frame buffer arrary + * @fb_list : frame buffer array * @read_idx : read index * @write_idx : write index * @count : buffer count in list @@ -72,7 +72,7 @@ struct h264_ring_fb_list { /** * struct vdec_h264_dec_info - decode information * @dpb_sz : decoding picture buffer size - * @resolution_changed : resoltion change happen + * @resolution_changed : resolution change happen * @realloc_mv_buf : flag to notify driver to re-allocate mv buffer * @reserved : for 8 bytes alignment * @bs_dma : Input bit-stream buffer dma address diff --git a/drivers/media/platform/mtk-vcodec/vdec/vdec_vp8_if.c b/drivers/media/platform/mtk-vcodec/vdec/vdec_vp8_if.c index 3e84a761db3a..bac3723038de 100644 --- a/drivers/media/platform/mtk-vcodec/vdec/vdec_vp8_if.c +++ b/drivers/media/platform/mtk-vcodec/vdec/vdec_vp8_if.c @@ -120,7 +120,7 @@ struct vdec_vp8_hw_reg_base { /** * struct vdec_vp8_vpu_inst - VPU instance for VP8 decode * @wq_hd : Wait queue to wait VPU message ack - * @signaled : 1 - Host has received ack message from VPU, 0 - not recevie + * @signaled : 1 - Host has received ack message from VPU, 0 - not receive * @failure : VPU execution result status 0 - success, others - fail * @inst_addr : VPU decoder instance address */ diff --git a/drivers/media/platform/mtk-vcodec/vdec_drv_if.h b/drivers/media/platform/mtk-vcodec/vdec_drv_if.h index ded1154481cd..9a21591f3818 100644 --- a/drivers/media/platform/mtk-vcodec/vdec_drv_if.h +++ b/drivers/media/platform/mtk-vcodec/vdec_drv_if.h @@ -80,7 +80,7 @@ void vdec_if_deinit(struct mtk_vcodec_ctx *ctx); * vdec_if_decode() - trigger decode * @ctx : [in] v4l2 context * @bs : [in] input bitstream - * @fb : [in] frame buffer to store decoded frame, when null menas parse + * @fb : [in] frame buffer to store decoded frame, when null means parse * header only * @res_chg : [out] resolution change happens if current bs have different * picture width/height diff --git a/drivers/media/platform/mtk-vcodec/vdec_vpu_if.h b/drivers/media/platform/mtk-vcodec/vdec_vpu_if.h index cd37bb2a610f..79d8eac7f5e2 100644 --- a/drivers/media/platform/mtk-vcodec/vdec_vpu_if.h +++ b/drivers/media/platform/mtk-vcodec/vdec_vpu_if.h @@ -62,7 +62,7 @@ int vpu_dec_start(struct vdec_vpu_inst *vpu, uint32_t *data, unsigned int len); /** * vpu_dec_end - end decoding, basically the function will be invoked once * when HW decoding done interrupt received successfully. The - * decoder in VPU will continute to do referene frame management + * decoder in VPU will continue to do reference frame management * and check if there is a new decoded frame available to display. * * @vpu : instance for vdec_vpu_inst diff --git a/drivers/media/platform/omap/omap_vout.c b/drivers/media/platform/omap/omap_vout.c index ff3de2dce5a2..37f0d7146dfa 100644 --- a/drivers/media/platform/omap/omap_vout.c +++ b/drivers/media/platform/omap/omap_vout.c @@ -1129,7 +1129,7 @@ static int vidioc_s_fmt_vid_out(struct file *file, void *fh, } timing = &dssdev->panel.timings; - /* We dont support RGB24-packed mode if vrfb rotation + /* We don't support RGB24-packed mode if vrfb rotation * is enabled*/ if ((is_rotation_enabled(vout)) && f->fmt.pix.pixelformat == V4L2_PIX_FMT_RGB24) { @@ -1147,7 +1147,7 @@ static int vidioc_s_fmt_vid_out(struct file *file, void *fh, vout->fbuf.fmt.width = timing->x_res; } - /* change to samller size is OK */ + /* change to smaller size is OK */ bpp = omap_vout_try_format(&f->fmt.pix); f->fmt.pix.sizeimage = f->fmt.pix.width * f->fmt.pix.height * bpp; diff --git a/drivers/media/platform/omap/omap_voutdef.h b/drivers/media/platform/omap/omap_voutdef.h index 56b630b1c8b4..c740393c8509 100644 --- a/drivers/media/platform/omap/omap_voutdef.h +++ b/drivers/media/platform/omap/omap_voutdef.h @@ -37,7 +37,7 @@ #define VID_MAX_WIDTH 1280 /* Largest width */ #define VID_MAX_HEIGHT 720 /* Largest height */ -/* Mimimum requirement is 2x2 for DSS */ +/* Minimum requirement is 2x2 for DSS */ #define VID_MIN_WIDTH 2 #define VID_MIN_HEIGHT 2 @@ -135,7 +135,7 @@ struct omap_vout_device { enum omap_color_mode dss_mode; /* we don't allow to request new buffer when old buffers are - * still mmaped + * still mmapped */ int mmap_count; diff --git a/drivers/media/platform/omap3isp/isp.c b/drivers/media/platform/omap3isp/isp.c index 13f2828d880d..bd57174d81a7 100644 --- a/drivers/media/platform/omap3isp/isp.c +++ b/drivers/media/platform/omap3isp/isp.c @@ -1517,7 +1517,7 @@ void omap3isp_print_status(struct isp_device *isp) * * To solve this problem power management support is split into prepare/complete * and suspend/resume operations. The pipelines are stopped in prepare() and the - * ISP clocks get disabled in suspend(). Similarly, the clocks are reenabled in + * ISP clocks get disabled in suspend(). Similarly, the clocks are re-enabled in * resume(), and the the pipelines are restarted in complete(). * * TODO: PM dependencies between the ISP and sensors are not modelled explicitly diff --git a/drivers/media/platform/omap3isp/ispccdc.c b/drivers/media/platform/omap3isp/ispccdc.c index 14a1c24037c4..261ad1175f98 100644 --- a/drivers/media/platform/omap3isp/ispccdc.c +++ b/drivers/media/platform/omap3isp/ispccdc.c @@ -1594,7 +1594,7 @@ static int ccdc_isr_buffer(struct isp_ccdc_device *ccdc) return 0; /* We're in continuous mode, and memory writes were disabled due to a - * buffer underrun. Reenable them now that we have a buffer. The buffer + * buffer underrun. Re-enable them now that we have a buffer. The buffer * address has been set in ccdc_video_queue. */ if (ccdc->state == ISP_PIPELINE_STREAM_CONTINUOUS && ccdc->underrun) { @@ -1712,7 +1712,7 @@ static void ccdc_vd1_isr(struct isp_ccdc_device *ccdc) * data to memory the CCDC and LSC are stopped immediately but * without change the CCDC stopping state machine. The CCDC * stopping state machine should be used only when user request - * for stopping is received (SINGLESHOT is an exeption). + * for stopping is received (SINGLESHOT is an exception). */ switch (ccdc->state) { case ISP_PIPELINE_STREAM_SINGLESHOT: diff --git a/drivers/media/platform/omap3isp/ispcsi2.c b/drivers/media/platform/omap3isp/ispcsi2.c index 9c180f607bcb..da66ea65be5d 100644 --- a/drivers/media/platform/omap3isp/ispcsi2.c +++ b/drivers/media/platform/omap3isp/ispcsi2.c @@ -710,7 +710,7 @@ static void csi2_isr_ctx(struct isp_csi2_device *csi2, /* Skip interrupts until we reach the frame skip count. The CSI2 will be * automatically disabled, as the frame skip count has been programmed - * in the CSI2_CTx_CTRL1::COUNT field, so reenable it. + * in the CSI2_CTx_CTRL1::COUNT field, so re-enable it. * * It would have been nice to rely on the FRAME_NUMBER interrupt instead * but it turned out that the interrupt is only generated when the CSI2 diff --git a/drivers/media/platform/pxa_camera.c b/drivers/media/platform/pxa_camera.c index 3cf3c6390cc8..4fe228752a43 100644 --- a/drivers/media/platform/pxa_camera.c +++ b/drivers/media/platform/pxa_camera.c @@ -1631,7 +1631,7 @@ static int pxa_camera_set_bus_param(struct pxa_camera_dev *pcdev) pcdev->channels = 1; - /* Make choises, based on platform preferences */ + /* Make choices, based on platform preferences */ if ((common_flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH) && (common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)) { if (pcdev->platform_flags & PXA_CAMERA_HSP) diff --git a/drivers/media/platform/qcom/venus/core.h b/drivers/media/platform/qcom/venus/core.h index 79c7e816c706..7a3feb5cee00 100644 --- a/drivers/media/platform/qcom/venus/core.h +++ b/drivers/media/platform/qcom/venus/core.h @@ -219,7 +219,7 @@ struct venus_buffer { #define to_venus_buffer(ptr) container_of(ptr, struct venus_buffer, vb) /** - * struct venus_inst - holds per instance paramerters + * struct venus_inst - holds per instance parameters * * @list: used for attach an instance to the core * @lock: instance lock diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c index beb9248992a4..2207a31d355e 100644 --- a/drivers/media/platform/rcar-vin/rcar-dma.c +++ b/drivers/media/platform/rcar-vin/rcar-dma.c @@ -681,7 +681,7 @@ static int rvin_setup(struct rvin_dev *vin) break; } - /* Enable VSYNC Field Toogle mode after one VSYNC input */ + /* Enable VSYNC Field Toggle mode after one VSYNC input */ if (vin->info->model == RCAR_GEN3) dmr2 = VNDMR2_FTEV; else diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c index 7a2851790b91..7cbdcbf9b090 100644 --- a/drivers/media/platform/rcar-vin/rcar-v4l2.c +++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c @@ -665,7 +665,7 @@ static void rvin_mc_try_format(struct rvin_dev *vin, * The V4L2 specification clearly documents the colorspace fields * as being set by drivers for capture devices. Using the values * supplied by userspace thus wouldn't comply with the API. Until - * the API is updated force fixed vaules. + * the API is updated force fixed values. */ pix->colorspace = RVIN_DEFAULT_COLORSPACE; pix->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(pix->colorspace); @@ -964,7 +964,7 @@ void rvin_v4l2_unregister(struct rvin_dev *vin) v4l2_info(&vin->v4l2_dev, "Removing %s\n", video_device_node_name(&vin->vdev)); - /* Checks internaly if vdev have been init or not */ + /* Checks internally if vdev have been init or not */ video_unregister_device(&vin->vdev); } diff --git a/drivers/media/platform/rockchip/rga/rga-hw.c b/drivers/media/platform/rockchip/rga/rga-hw.c index 96d1b1b3fe8e..843e50d17a72 100644 --- a/drivers/media/platform/rockchip/rga/rga-hw.c +++ b/drivers/media/platform/rockchip/rga/rga-hw.c @@ -256,7 +256,7 @@ static void rga_cmd_set_trans_info(struct rga_ctx *ctx) } /* - * Cacluate the up/down scaling mode/factor. + * Calculate the up/down scaling mode/factor. * * RGA used to scale the picture first, and then rotate second, * so we need to swap the w/h when rotate degree is 90/270. @@ -304,7 +304,7 @@ static void rga_cmd_set_trans_info(struct rga_ctx *ctx) } /* - * Cacluate the framebuffer virtual strides and active size, + * Calculate the framebuffer virtual strides and active size, * note that the step of vir_stride / vir_width is 4 byte words */ src_vir_info.data.vir_stride = ctx->in.stride >> 2; @@ -318,7 +318,7 @@ static void rga_cmd_set_trans_info(struct rga_ctx *ctx) dst_act_info.data.act_width = dst_w - 1; /* - * Cacluate the source framebuffer base address with offset pixel. + * Calculate the source framebuffer base address with offset pixel. */ src_offsets = rga_get_addr_offset(&ctx->in, src_x, src_y, src_w, src_h); diff --git a/drivers/media/platform/s3c-camif/camif-core.h b/drivers/media/platform/s3c-camif/camif-core.h index 1f5c8c94ce89..be5e7357dffc 100644 --- a/drivers/media/platform/s3c-camif/camif-core.h +++ b/drivers/media/platform/s3c-camif/camif-core.h @@ -260,7 +260,7 @@ struct camif_vp { * @clock: clocks required for the CAMIF operation * @lock: mutex protecting this data structure * @slock: spinlock protecting CAMIF registers - * @io_base: start address of the mmaped CAMIF registers + * @io_base: start address of the mmapped CAMIF registers */ struct camif_dev { struct media_device media_dev; diff --git a/drivers/media/platform/s5p-jpeg/jpeg-core.h b/drivers/media/platform/s5p-jpeg/jpeg-core.h index 90fda4b720eb..144c102ff05f 100644 --- a/drivers/media/platform/s5p-jpeg/jpeg-core.h +++ b/drivers/media/platform/s5p-jpeg/jpeg-core.h @@ -153,7 +153,7 @@ struct s5p_jpeg_variant { /** * struct jpeg_fmt - driver's internal color format data - * @name: format descritpion + * @name: format description * @fourcc: the fourcc code, 0 if not applicable * @depth: number of bits per pixel * @colplanes: number of color planes (1 for packed formats) @@ -193,7 +193,7 @@ struct s5p_jpeg_marker { * @sos: SOS marker's position relative to the buffer beginning * @dht: DHT markers' positions relative to the buffer beginning * @dqt: DQT markers' positions relative to the buffer beginning - * @sof: SOF0 marker's postition relative to the buffer beginning + * @sof: SOF0 marker's position relative to the buffer beginning * @sof_len: SOF0 marker's payload length (without length field itself) * @components: number of image components * @size: image buffer size in bytes diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h index 20442a9b9f7a..24148020baa9 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h @@ -268,7 +268,7 @@ struct s5p_mfc_priv_buf { * @enc_ctrl_handler: control framework handler for encoding * @pm: power management control * @variant: MFC hardware variant information - * @num_inst: couter of active MFC instances + * @num_inst: counter of active MFC instances * @irqlock: lock for operations on videobuf2 queues * @condlock: lock for changing/checking if a context is ready to be * processed diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c index ee7b15b335e0..9f832ba7bc8c 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c @@ -51,7 +51,7 @@ int s5p_mfc_load_firmware(struct s5p_mfc_dev *dev) struct firmware *fw_blob; int i, err = -EINVAL; - /* Firmare has to be present as a separate file or compiled + /* Firmware has to be present as a separate file or compiled * into kernel. */ mfc_debug_enter(); diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c index f4c0e3a8f27d..e111f9c47179 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c @@ -602,7 +602,7 @@ static int vidioc_querybuf(struct file *file, void *priv, int i; if (buf->memory != V4L2_MEMORY_MMAP) { - mfc_err("Only mmaped buffers can be used\n"); + mfc_err("Only mmapped buffers can be used\n"); return -EINVAL; } mfc_debug(2, "State: %d, buf->type: %d\n", ctx->state, buf->type); diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c index 0913881219ff..6144e95f6425 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c @@ -1293,7 +1293,7 @@ static int s5p_mfc_run_init_dec_buffers(struct s5p_mfc_ctx *ctx) * First set the output frame buffers */ if (ctx->capture_state != QUEUE_BUFS_MMAPED) { - mfc_err("It seems that not all destination buffers were mmaped\nMFC requires that all destination are mmaped before starting processing\n"); + mfc_err("It seems that not all destination buffers were mmapped\nMFC requires that all destination are mmapped before starting processing\n"); return -EAGAIN; } if (list_empty(&ctx->src_queue)) { diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c index 7c629be43205..281699ab7fe1 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c @@ -53,7 +53,7 @@ static int s5p_mfc_alloc_dec_temp_buffers_v6(struct s5p_mfc_ctx *ctx) return 0; } -/* Release temproary buffers for decoding */ +/* Release temporary buffers for decoding */ static void s5p_mfc_release_dec_desc_buffer_v6(struct s5p_mfc_ctx *ctx) { /* NOP */ @@ -1928,7 +1928,7 @@ static inline int s5p_mfc_run_init_dec_buffers(struct s5p_mfc_ctx *ctx) if (ctx->capture_state != QUEUE_BUFS_MMAPED) { mfc_err("It seems that not all destination buffers were\n" - "mmaped.MFC requires that all destination are mmaped\n" + "mmapped.MFC requires that all destination are mmapped\n" "before starting processing.\n"); return -EAGAIN; } diff --git a/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.h b/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.h index 3dbb3a287cc0..c9d6021904cd 100644 --- a/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.h +++ b/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.h @@ -193,7 +193,7 @@ struct c8sectpfei { #define C8SECTPFE_SYS_ENABLE BIT(0) /* - * Ponter record data structure required for each input block + * Pointer record data structure required for each input block * see Table 82 on page 167 of functional specification. */ diff --git a/drivers/media/platform/sti/delta/delta.h b/drivers/media/platform/sti/delta/delta.h index 2ba99922c05b..914556030e70 100644 --- a/drivers/media/platform/sti/delta/delta.h +++ b/drivers/media/platform/sti/delta/delta.h @@ -286,7 +286,7 @@ struct delta_dec { * Header parsing must be done using decode(), giving * explicitly header access unit or first access unit of bitstream. * If no valid header is found, get_streaminfo will return -ENODATA, - * in this case the next bistream access unit must be decoded till + * in this case the next bitstream access unit must be decoded till * get_streaminfo becomes successful. */ int (*get_streaminfo)(struct delta_ctx *ctx, diff --git a/drivers/media/platform/sti/hva/hva-h264.c b/drivers/media/platform/sti/hva/hva-h264.c index b61a5d337d2a..c34f7cf5aed2 100644 --- a/drivers/media/platform/sti/hva/hva-h264.c +++ b/drivers/media/platform/sti/hva/hva-h264.c @@ -626,7 +626,7 @@ static int hva_h264_prepare_task(struct hva_ctx *pctx, td->frame_width = frame_width; td->frame_height = frame_height; - /* set frame alignement */ + /* set frame alignment */ td->window_width = frame_width; td->window_height = frame_height; td->window_horizontal_offset = 0; diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c index 6732874114cf..5fe5b38fa901 100644 --- a/drivers/media/platform/stm32/stm32-dcmi.c +++ b/drivers/media/platform/stm32/stm32-dcmi.c @@ -1544,7 +1544,7 @@ static void dcmi_graph_notify_unbind(struct v4l2_async_notifier *notifier, dev_dbg(dcmi->dev, "Removing %s\n", video_device_node_name(dcmi->vdev)); - /* Checks internaly if vdev has been init or not */ + /* Checks internally if vdev has been init or not */ video_unregister_device(dcmi->vdev); } diff --git a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h index 0bb000712c33..85f97d4f086e 100644 --- a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h +++ b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h @@ -65,7 +65,7 @@ bool sun6i_csi_is_format_supported(struct sun6i_csi *csi, u32 pixformat, int sun6i_csi_set_power(struct sun6i_csi *csi, bool enable); /** - * sun6i_csi_update_config() - update the csi register setttings + * sun6i_csi_update_config() - update the csi register settings * @csi: pointer to the csi * @config: see struct sun6i_csi_config */ diff --git a/drivers/media/platform/ti-vpe/vpdma.c b/drivers/media/platform/ti-vpe/vpdma.c index e2cf2b90e500..1da2cb3aaf0c 100644 --- a/drivers/media/platform/ti-vpe/vpdma.c +++ b/drivers/media/platform/ti-vpe/vpdma.c @@ -404,7 +404,7 @@ EXPORT_SYMBOL(vpdma_map_desc_buf); /* * unmap descriptor/payload DMA buffer, disabling DMA access and - * allowing the main processor to acces the data + * allowing the main processor to access the data */ void vpdma_unmap_desc_buf(struct vpdma_data *vpdma, struct vpdma_buf *buf) { @@ -501,7 +501,7 @@ void vpdma_reset_desc_list(struct vpdma_desc_list *list) EXPORT_SYMBOL(vpdma_reset_desc_list); /* - * free the buffer allocated fot the VPDMA descriptor list, this should be + * free the buffer allocated for the VPDMA descriptor list, this should be * called when the user doesn't want to use VPDMA any more. */ void vpdma_free_desc_list(struct vpdma_desc_list *list) @@ -790,7 +790,7 @@ static void dump_dtd(struct vpdma_dtd *dtd) * append an outbound data transfer descriptor to the given descriptor list, * this sets up a 'client to memory' VPDMA transfer for the given VPDMA channel * - * @list: vpdma desc list to which we add this decriptor + * @list: vpdma desc list to which we add this descriptor * @width: width of the image in pixels in memory * @c_rect: compose params of output image * @fmt: vpdma data format of the buffer @@ -798,7 +798,7 @@ static void dump_dtd(struct vpdma_dtd *dtd) * max_width: enum for maximum width of data transfer * max_height: enum for maximum height of data transfer * chan: VPDMA channel - * flags: VPDMA flags to configure some descriptor fileds + * flags: VPDMA flags to configure some descriptor fields */ void vpdma_add_out_dtd(struct vpdma_desc_list *list, int width, int stride, const struct v4l2_rect *c_rect, @@ -863,14 +863,14 @@ EXPORT_SYMBOL(vpdma_rawchan_add_out_dtd); * append an inbound data transfer descriptor to the given descriptor list, * this sets up a 'memory to client' VPDMA transfer for the given VPDMA channel * - * @list: vpdma desc list to which we add this decriptor + * @list: vpdma desc list to which we add this descriptor * @width: width of the image in pixels in memory(not the cropped width) * @c_rect: crop params of input image * @fmt: vpdma data format of the buffer * dma_addr: dma address as seen by VPDMA * chan: VPDMA channel * field: top or bottom field info of the input image - * flags: VPDMA flags to configure some descriptor fileds + * flags: VPDMA flags to configure some descriptor fields * frame_width/height: the complete width/height of the image presented to the * client (this makes sense when multiple channels are * connected to the same client, forming a larger frame) @@ -1008,7 +1008,7 @@ unsigned int vpdma_get_list_mask(struct vpdma_data *vpdma, int irq_num) } EXPORT_SYMBOL(vpdma_get_list_mask); -/* clear previosuly occured list intterupts in the LIST_STAT register */ +/* clear previously occurred list interupts in the LIST_STAT register */ void vpdma_clear_list_stat(struct vpdma_data *vpdma, int irq_num, int list_num) { diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c index d70871d0ad2d..207e7e76c048 100644 --- a/drivers/media/platform/ti-vpe/vpe.c +++ b/drivers/media/platform/ti-vpe/vpe.c @@ -876,7 +876,7 @@ static int set_srcdst_params(struct vpe_ctx *ctx) /* * we make sure that the source image has a 16 byte aligned * stride, we need to do the same for the motion vector buffer - * by aligning it's stride to the next 16 byte boundry. this + * by aligning it's stride to the next 16 byte boundary. this * extra space will not be used by the de-interlacer, but will * ensure that vpdma operates correctly */ diff --git a/drivers/media/platform/vsp1/vsp1_brx.c b/drivers/media/platform/vsp1/vsp1_brx.c index 5e50178b057d..58ad248cd7f7 100644 --- a/drivers/media/platform/vsp1/vsp1_brx.c +++ b/drivers/media/platform/vsp1/vsp1_brx.c @@ -296,7 +296,7 @@ static void brx_configure_stream(struct vsp1_entity *entity, /* * The hardware is extremely flexible but we have no userspace API to * expose all the parameters, nor is it clear whether we would have use - * cases for all the supported modes. Let's just harcode the parameters + * cases for all the supported modes. Let's just hardcode the parameters * to sane default values for now. */ @@ -373,7 +373,7 @@ static void brx_configure_stream(struct vsp1_entity *entity, vsp1_brx_write(brx, dlb, VI6_BRU_CTRL(i), ctrl); /* - * Harcode the blending formula to + * Hardcode the blending formula to * * DSTc = DSTc * (1 - SRCa) + SRCc * SRCa * DSTa = DSTa * (1 - SRCa) + SRCa diff --git a/drivers/media/platform/xilinx/xilinx-vip.c b/drivers/media/platform/xilinx/xilinx-vip.c index 18f98838111b..08a825c3a3f6 100644 --- a/drivers/media/platform/xilinx/xilinx-vip.c +++ b/drivers/media/platform/xilinx/xilinx-vip.c @@ -166,7 +166,7 @@ EXPORT_SYMBOL_GPL(xvip_set_format_size); * the register, otherwise the bitmask is cleared from the register * when the flag @set is false. * - * Fox eample, this function can be used to set a control with a boolean value + * Fox example, this function can be used to set a control with a boolean value * requested by users. If the caller knows whether to set or clear in the first * place, the caller should call xvip_clr() or xvip_set() directly instead of * using this function.
Use codespell to fix lots of typos over frontends. Manually verified to avoid false-positives. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> --- drivers/media/platform/Kconfig | 2 +- drivers/media/platform/atmel/atmel-isi.c | 4 ++-- drivers/media/platform/coda/coda-jpeg.c | 2 +- drivers/media/platform/davinci/isif.c | 4 ++-- drivers/media/platform/davinci/vpbe.c | 2 +- drivers/media/platform/davinci/vpif.c | 2 +- drivers/media/platform/davinci/vpif_display.c | 4 ++-- .../media/platform/exynos4-is/fimc-is-command.h | 2 +- drivers/media/platform/exynos4-is/fimc-is-param.h | 2 +- drivers/media/platform/exynos4-is/media-dev.h | 2 +- drivers/media/platform/exynos4-is/mipi-csis.c | 4 ++-- drivers/media/platform/marvell-ccic/mmp-driver.c | 4 ++-- drivers/media/platform/mtk-mdp/mtk_mdp_core.h | 6 +++--- drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c | 2 +- drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h | 4 ++-- drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c | 2 +- .../media/platform/mtk-vcodec/vdec/vdec_h264_if.c | 4 ++-- .../media/platform/mtk-vcodec/vdec/vdec_vp8_if.c | 2 +- drivers/media/platform/mtk-vcodec/vdec_drv_if.h | 2 +- drivers/media/platform/mtk-vcodec/vdec_vpu_if.h | 2 +- drivers/media/platform/omap/omap_vout.c | 4 ++-- drivers/media/platform/omap/omap_voutdef.h | 4 ++-- drivers/media/platform/omap3isp/isp.c | 2 +- drivers/media/platform/omap3isp/ispccdc.c | 4 ++-- drivers/media/platform/omap3isp/ispcsi2.c | 2 +- drivers/media/platform/pxa_camera.c | 2 +- drivers/media/platform/qcom/venus/core.h | 2 +- drivers/media/platform/rcar-vin/rcar-dma.c | 2 +- drivers/media/platform/rcar-vin/rcar-v4l2.c | 4 ++-- drivers/media/platform/rockchip/rga/rga-hw.c | 6 +++--- drivers/media/platform/s3c-camif/camif-core.h | 2 +- drivers/media/platform/s5p-jpeg/jpeg-core.h | 4 ++-- drivers/media/platform/s5p-mfc/s5p_mfc_common.h | 2 +- drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c | 2 +- drivers/media/platform/s5p-mfc/s5p_mfc_dec.c | 2 +- drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c | 2 +- drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c | 4 ++-- .../media/platform/sti/c8sectpfe/c8sectpfe-core.h | 2 +- drivers/media/platform/sti/delta/delta.h | 2 +- drivers/media/platform/sti/hva/hva-h264.c | 2 +- drivers/media/platform/stm32/stm32-dcmi.c | 2 +- drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h | 2 +- drivers/media/platform/ti-vpe/vpdma.c | 14 +++++++------- drivers/media/platform/ti-vpe/vpe.c | 2 +- drivers/media/platform/vsp1/vsp1_brx.c | 4 ++-- drivers/media/platform/xilinx/xilinx-vip.c | 2 +- 46 files changed, 70 insertions(+), 70 deletions(-)