Message ID | 1550657565-7263-2-git-send-email-sgruszka@redhat.com (mailing list archive) |
---|---|
State | Changes Requested |
Delegated to: | Kalle Valo |
Headers | show |
Series | [1/3] mt76usb: allow mt76u_bulk_msg be used for reads | expand |
> Use usb_bulk_msg for reading MCU command responses. This simplify code > a lot. > > Together with 97a3005759c ("mt76usb: allow mt76u_bulk_msg be used > for reads") it also fix possible problems with rx data buffers > not being aligned and contained within single page. After doing > page_frag_alloc(1024) consecutive page_frag_alloc(PAGE_SIZE) will > alloc PAGE_SIZE buffer at PAGE_SIZE - 1024 offset. > > Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Hi Stanislaw, very nice simplification. I need to post a series and this patch will help me a lot, thx :) Just few comments inline Regards, Lorenzo > --- > drivers/net/wireless/mediatek/mt76/mt76.h | 3 +- > drivers/net/wireless/mediatek/mt76/mt76x0/usb.c | 11 -------- > .../net/wireless/mediatek/mt76/mt76x02_usb_mcu.c | 32 +++++++--------------- > drivers/net/wireless/mediatek/mt76/mt76x2/usb.c | 11 -------- > drivers/net/wireless/mediatek/mt76/usb.c | 1 - > drivers/net/wireless/mediatek/mt76/usb_mcu.c | 31 +++------------------ > 6 files changed, 15 insertions(+), 74 deletions(-) > > diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h b/drivers/net/wireless/mediatek/mt76/mt76.h > index 45e44bcaa523..ce53069461ec 100644 > --- a/drivers/net/wireless/mediatek/mt76/mt76.h > +++ b/drivers/net/wireless/mediatek/mt76/mt76.h > @@ -384,8 +384,7 @@ struct mt76_usb { > > struct mt76u_mcu { > struct mutex mutex; > - struct completion cmpl; > - struct mt76u_buf res; > + u8 *data; > u32 msg_seq; > > /* multiple reads */ > diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/usb.c b/drivers/net/wireless/mediatek/mt76/mt76x0/usb.c > index da9d05f6074d..f0c33890f1a5 100644 > --- a/drivers/net/wireless/mediatek/mt76/mt76x0/usb.c > +++ b/drivers/net/wireless/mediatek/mt76/mt76x0/usb.c > @@ -311,13 +311,11 @@ static int __maybe_unused mt76x0_suspend(struct usb_interface *usb_intf, > pm_message_t state) > { > struct mt76x02_dev *dev = usb_get_intfdata(usb_intf); > - struct mt76_usb *usb = &dev->mt76.usb; > > mt76u_stop_queues(&dev->mt76); > mt76x0u_mac_stop(dev); > clear_bit(MT76_STATE_MCU_RUNNING, &dev->mt76.state); > mt76x0_chip_onoff(dev, false, false); > - usb_kill_urb(usb->mcu.res.urb); > > return 0; > } > @@ -328,15 +326,6 @@ static int __maybe_unused mt76x0_resume(struct usb_interface *usb_intf) > struct mt76_usb *usb = &dev->mt76.usb; > int ret; > > - reinit_completion(&usb->mcu.cmpl); > - ret = mt76u_submit_buf(&dev->mt76, USB_DIR_IN, > - MT_EP_IN_CMD_RESP, > - &usb->mcu.res, GFP_KERNEL, > - mt76u_mcu_complete_urb, > - &usb->mcu.cmpl); > - if (ret < 0) > - goto err; > - > ret = mt76u_submit_rx_buffers(&dev->mt76); > if (ret < 0) > goto err; > diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_usb_mcu.c b/drivers/net/wireless/mediatek/mt76/mt76x02_usb_mcu.c > index f497c8e4332a..0cb8751321a1 100644 > --- a/drivers/net/wireless/mediatek/mt76/mt76x02_usb_mcu.c > +++ b/drivers/net/wireless/mediatek/mt76/mt76x02_usb_mcu.c > @@ -61,33 +61,21 @@ mt76x02u_multiple_mcu_reads(struct mt76_dev *dev, u8 *data, int len) > static int mt76x02u_mcu_wait_resp(struct mt76_dev *dev, u8 seq) > { > struct mt76_usb *usb = &dev->usb; > - struct mt76u_buf *buf = &usb->mcu.res; > - struct urb *urb = buf->urb; > - u8 *data = buf->buf; > - int i, ret; > + u8 *data = usb->mcu.data; > + int i, len, ret; > u32 rxfce; > > for (i = 0; i < 5; i++) { > - if (!wait_for_completion_timeout(&usb->mcu.cmpl, > - msecs_to_jiffies(300))) > + ret = mt76u_bulk_msg(dev, data, MCU_RESP_URB_SIZE, &len, 300); > + if (ret == -ETIMEDOUT) > continue; > - > - if (urb->status) > - return -EIO; > + if (ret) > + goto out; > > if (usb->mcu.rp) > - mt76x02u_multiple_mcu_reads(dev, data + 4, > - urb->actual_length - 8); > + mt76x02u_multiple_mcu_reads(dev, data + 4, len - 8); > > rxfce = get_unaligned_le32(data); > - ret = mt76u_submit_buf(dev, USB_DIR_IN, > - MT_EP_IN_CMD_RESP, > - buf, GFP_KERNEL, > - mt76u_mcu_complete_urb, > - &usb->mcu.cmpl); > - if (ret) > - return ret; > - > if (seq == FIELD_GET(MT_RX_FCE_INFO_CMD_SEQ, rxfce) && > FIELD_GET(MT_RX_FCE_INFO_EVT_TYPE, rxfce) == EVT_CMD_DONE) > return 0; > @@ -96,9 +84,9 @@ static int mt76x02u_mcu_wait_resp(struct mt76_dev *dev, u8 seq) > FIELD_GET(MT_RX_FCE_INFO_EVT_TYPE, rxfce), > seq, FIELD_GET(MT_RX_FCE_INFO_CMD_SEQ, rxfce)); > } > - > - dev_err(dev->dev, "error: %s timed out\n", __func__); > - return -ETIMEDOUT; > +out: > + dev_err(dev->dev, "error: %s failed with %d\n", __func__, ret); > + return ret; > } > > static int > diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2/usb.c b/drivers/net/wireless/mediatek/mt76/mt76x2/usb.c > index f81a85e96922..ddb6b2c48e01 100644 > --- a/drivers/net/wireless/mediatek/mt76/mt76x2/usb.c > +++ b/drivers/net/wireless/mediatek/mt76/mt76x2/usb.c > @@ -100,11 +100,9 @@ static int __maybe_unused mt76x2u_suspend(struct usb_interface *intf, > pm_message_t state) > { > struct mt76x02_dev *dev = usb_get_intfdata(intf); > - struct mt76_usb *usb = &dev->mt76.usb; > > mt76u_stop_queues(&dev->mt76); > mt76x2u_stop_hw(dev); > - usb_kill_urb(usb->mcu.res.urb); > > return 0; > } > @@ -115,15 +113,6 @@ static int __maybe_unused mt76x2u_resume(struct usb_interface *intf) > struct mt76_usb *usb = &dev->mt76.usb; > int err; > > - reinit_completion(&usb->mcu.cmpl); > - err = mt76u_submit_buf(&dev->mt76, USB_DIR_IN, > - MT_EP_IN_CMD_RESP, > - &usb->mcu.res, GFP_KERNEL, > - mt76u_mcu_complete_urb, > - &usb->mcu.cmpl); > - if (err < 0) > - goto err; > - > err = mt76u_submit_rx_buffers(&dev->mt76); > if (err < 0) > goto err; > diff --git a/drivers/net/wireless/mediatek/mt76/usb.c b/drivers/net/wireless/mediatek/mt76/usb.c > index 78191968b4fa..5c3b7f735aae 100644 > --- a/drivers/net/wireless/mediatek/mt76/usb.c > +++ b/drivers/net/wireless/mediatek/mt76/usb.c > @@ -933,7 +933,6 @@ int mt76u_init(struct mt76_dev *dev, > INIT_DELAYED_WORK(&usb->stat_work, mt76u_tx_status_data); > skb_queue_head_init(&dev->rx_skb[MT_RXQ_MAIN]); > > - init_completion(&usb->mcu.cmpl); > mutex_init(&usb->mcu.mutex); > > mutex_init(&usb->usb_ctrl_mtx); > diff --git a/drivers/net/wireless/mediatek/mt76/usb_mcu.c b/drivers/net/wireless/mediatek/mt76/usb_mcu.c > index 72c8607da4b4..747231edc57d 100644 > --- a/drivers/net/wireless/mediatek/mt76/usb_mcu.c > +++ b/drivers/net/wireless/mediatek/mt76/usb_mcu.c > @@ -16,42 +16,19 @@ > > #include "mt76.h" > > -void mt76u_mcu_complete_urb(struct urb *urb) > -{ > - struct completion *cmpl = urb->context; > - > - complete(cmpl); > -} > -EXPORT_SYMBOL_GPL(mt76u_mcu_complete_urb); > - > int mt76u_mcu_init_rx(struct mt76_dev *dev) > { > struct mt76_usb *usb = &dev->usb; > - int err; > > - err = mt76u_buf_alloc(dev, &usb->mcu.res, MCU_RESP_URB_SIZE, > - MCU_RESP_URB_SIZE, GFP_KERNEL); > - if (err < 0) > - return err; > - > - err = mt76u_submit_buf(dev, USB_DIR_IN, MT_EP_IN_CMD_RESP, > - &usb->mcu.res, GFP_KERNEL, > - mt76u_mcu_complete_urb, > - &usb->mcu.cmpl); > - if (err < 0) > - mt76u_buf_free(&usb->mcu.res); > - > - return err; > + usb->mcu.data = kmalloc(MCU_RESP_URB_SIZE, GFP_KERNEL); if you use devm_kmalloc() you can drop mt76u_mcu_deinit Regards, Lorenzo > + return usb->mcu.data ? 0 : -ENOMEM; > } > EXPORT_SYMBOL_GPL(mt76u_mcu_init_rx); > > void mt76u_mcu_deinit(struct mt76_dev *dev) > { > - struct mt76u_buf *buf = &dev->usb.mcu.res; > + struct mt76_usb *usb = &dev->usb; > > - if (buf->urb) { > - usb_kill_urb(buf->urb); > - mt76u_buf_free(buf); > - } > + kfree(usb->mcu.data); > } > EXPORT_SYMBOL_GPL(mt76u_mcu_deinit); > -- > 2.7.5 >
diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h b/drivers/net/wireless/mediatek/mt76/mt76.h index 45e44bcaa523..ce53069461ec 100644 --- a/drivers/net/wireless/mediatek/mt76/mt76.h +++ b/drivers/net/wireless/mediatek/mt76/mt76.h @@ -384,8 +384,7 @@ struct mt76_usb { struct mt76u_mcu { struct mutex mutex; - struct completion cmpl; - struct mt76u_buf res; + u8 *data; u32 msg_seq; /* multiple reads */ diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/usb.c b/drivers/net/wireless/mediatek/mt76/mt76x0/usb.c index da9d05f6074d..f0c33890f1a5 100644 --- a/drivers/net/wireless/mediatek/mt76/mt76x0/usb.c +++ b/drivers/net/wireless/mediatek/mt76/mt76x0/usb.c @@ -311,13 +311,11 @@ static int __maybe_unused mt76x0_suspend(struct usb_interface *usb_intf, pm_message_t state) { struct mt76x02_dev *dev = usb_get_intfdata(usb_intf); - struct mt76_usb *usb = &dev->mt76.usb; mt76u_stop_queues(&dev->mt76); mt76x0u_mac_stop(dev); clear_bit(MT76_STATE_MCU_RUNNING, &dev->mt76.state); mt76x0_chip_onoff(dev, false, false); - usb_kill_urb(usb->mcu.res.urb); return 0; } @@ -328,15 +326,6 @@ static int __maybe_unused mt76x0_resume(struct usb_interface *usb_intf) struct mt76_usb *usb = &dev->mt76.usb; int ret; - reinit_completion(&usb->mcu.cmpl); - ret = mt76u_submit_buf(&dev->mt76, USB_DIR_IN, - MT_EP_IN_CMD_RESP, - &usb->mcu.res, GFP_KERNEL, - mt76u_mcu_complete_urb, - &usb->mcu.cmpl); - if (ret < 0) - goto err; - ret = mt76u_submit_rx_buffers(&dev->mt76); if (ret < 0) goto err; diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_usb_mcu.c b/drivers/net/wireless/mediatek/mt76/mt76x02_usb_mcu.c index f497c8e4332a..0cb8751321a1 100644 --- a/drivers/net/wireless/mediatek/mt76/mt76x02_usb_mcu.c +++ b/drivers/net/wireless/mediatek/mt76/mt76x02_usb_mcu.c @@ -61,33 +61,21 @@ mt76x02u_multiple_mcu_reads(struct mt76_dev *dev, u8 *data, int len) static int mt76x02u_mcu_wait_resp(struct mt76_dev *dev, u8 seq) { struct mt76_usb *usb = &dev->usb; - struct mt76u_buf *buf = &usb->mcu.res; - struct urb *urb = buf->urb; - u8 *data = buf->buf; - int i, ret; + u8 *data = usb->mcu.data; + int i, len, ret; u32 rxfce; for (i = 0; i < 5; i++) { - if (!wait_for_completion_timeout(&usb->mcu.cmpl, - msecs_to_jiffies(300))) + ret = mt76u_bulk_msg(dev, data, MCU_RESP_URB_SIZE, &len, 300); + if (ret == -ETIMEDOUT) continue; - - if (urb->status) - return -EIO; + if (ret) + goto out; if (usb->mcu.rp) - mt76x02u_multiple_mcu_reads(dev, data + 4, - urb->actual_length - 8); + mt76x02u_multiple_mcu_reads(dev, data + 4, len - 8); rxfce = get_unaligned_le32(data); - ret = mt76u_submit_buf(dev, USB_DIR_IN, - MT_EP_IN_CMD_RESP, - buf, GFP_KERNEL, - mt76u_mcu_complete_urb, - &usb->mcu.cmpl); - if (ret) - return ret; - if (seq == FIELD_GET(MT_RX_FCE_INFO_CMD_SEQ, rxfce) && FIELD_GET(MT_RX_FCE_INFO_EVT_TYPE, rxfce) == EVT_CMD_DONE) return 0; @@ -96,9 +84,9 @@ static int mt76x02u_mcu_wait_resp(struct mt76_dev *dev, u8 seq) FIELD_GET(MT_RX_FCE_INFO_EVT_TYPE, rxfce), seq, FIELD_GET(MT_RX_FCE_INFO_CMD_SEQ, rxfce)); } - - dev_err(dev->dev, "error: %s timed out\n", __func__); - return -ETIMEDOUT; +out: + dev_err(dev->dev, "error: %s failed with %d\n", __func__, ret); + return ret; } static int diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2/usb.c b/drivers/net/wireless/mediatek/mt76/mt76x2/usb.c index f81a85e96922..ddb6b2c48e01 100644 --- a/drivers/net/wireless/mediatek/mt76/mt76x2/usb.c +++ b/drivers/net/wireless/mediatek/mt76/mt76x2/usb.c @@ -100,11 +100,9 @@ static int __maybe_unused mt76x2u_suspend(struct usb_interface *intf, pm_message_t state) { struct mt76x02_dev *dev = usb_get_intfdata(intf); - struct mt76_usb *usb = &dev->mt76.usb; mt76u_stop_queues(&dev->mt76); mt76x2u_stop_hw(dev); - usb_kill_urb(usb->mcu.res.urb); return 0; } @@ -115,15 +113,6 @@ static int __maybe_unused mt76x2u_resume(struct usb_interface *intf) struct mt76_usb *usb = &dev->mt76.usb; int err; - reinit_completion(&usb->mcu.cmpl); - err = mt76u_submit_buf(&dev->mt76, USB_DIR_IN, - MT_EP_IN_CMD_RESP, - &usb->mcu.res, GFP_KERNEL, - mt76u_mcu_complete_urb, - &usb->mcu.cmpl); - if (err < 0) - goto err; - err = mt76u_submit_rx_buffers(&dev->mt76); if (err < 0) goto err; diff --git a/drivers/net/wireless/mediatek/mt76/usb.c b/drivers/net/wireless/mediatek/mt76/usb.c index 78191968b4fa..5c3b7f735aae 100644 --- a/drivers/net/wireless/mediatek/mt76/usb.c +++ b/drivers/net/wireless/mediatek/mt76/usb.c @@ -933,7 +933,6 @@ int mt76u_init(struct mt76_dev *dev, INIT_DELAYED_WORK(&usb->stat_work, mt76u_tx_status_data); skb_queue_head_init(&dev->rx_skb[MT_RXQ_MAIN]); - init_completion(&usb->mcu.cmpl); mutex_init(&usb->mcu.mutex); mutex_init(&usb->usb_ctrl_mtx); diff --git a/drivers/net/wireless/mediatek/mt76/usb_mcu.c b/drivers/net/wireless/mediatek/mt76/usb_mcu.c index 72c8607da4b4..747231edc57d 100644 --- a/drivers/net/wireless/mediatek/mt76/usb_mcu.c +++ b/drivers/net/wireless/mediatek/mt76/usb_mcu.c @@ -16,42 +16,19 @@ #include "mt76.h" -void mt76u_mcu_complete_urb(struct urb *urb) -{ - struct completion *cmpl = urb->context; - - complete(cmpl); -} -EXPORT_SYMBOL_GPL(mt76u_mcu_complete_urb); - int mt76u_mcu_init_rx(struct mt76_dev *dev) { struct mt76_usb *usb = &dev->usb; - int err; - err = mt76u_buf_alloc(dev, &usb->mcu.res, MCU_RESP_URB_SIZE, - MCU_RESP_URB_SIZE, GFP_KERNEL); - if (err < 0) - return err; - - err = mt76u_submit_buf(dev, USB_DIR_IN, MT_EP_IN_CMD_RESP, - &usb->mcu.res, GFP_KERNEL, - mt76u_mcu_complete_urb, - &usb->mcu.cmpl); - if (err < 0) - mt76u_buf_free(&usb->mcu.res); - - return err; + usb->mcu.data = kmalloc(MCU_RESP_URB_SIZE, GFP_KERNEL); + return usb->mcu.data ? 0 : -ENOMEM; } EXPORT_SYMBOL_GPL(mt76u_mcu_init_rx); void mt76u_mcu_deinit(struct mt76_dev *dev) { - struct mt76u_buf *buf = &dev->usb.mcu.res; + struct mt76_usb *usb = &dev->usb; - if (buf->urb) { - usb_kill_urb(buf->urb); - mt76u_buf_free(buf); - } + kfree(usb->mcu.data); } EXPORT_SYMBOL_GPL(mt76u_mcu_deinit);
Use usb_bulk_msg for reading MCU command responses. This simplify code a lot. Together with 97a3005759c ("mt76usb: allow mt76u_bulk_msg be used for reads") it also fix possible problems with rx data buffers not being aligned and contained within single page. After doing page_frag_alloc(1024) consecutive page_frag_alloc(PAGE_SIZE) will alloc PAGE_SIZE buffer at PAGE_SIZE - 1024 offset. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> --- drivers/net/wireless/mediatek/mt76/mt76.h | 3 +- drivers/net/wireless/mediatek/mt76/mt76x0/usb.c | 11 -------- .../net/wireless/mediatek/mt76/mt76x02_usb_mcu.c | 32 +++++++--------------- drivers/net/wireless/mediatek/mt76/mt76x2/usb.c | 11 -------- drivers/net/wireless/mediatek/mt76/usb.c | 1 - drivers/net/wireless/mediatek/mt76/usb_mcu.c | 31 +++------------------ 6 files changed, 15 insertions(+), 74 deletions(-)