| Message ID | 1550648704-11545-1-git-send-email-sugaya.taichi@socionext.com (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Headers | show |
| Series | Add basic support for Socionext Milbeaut M10V SoC | expand |
On Wed, Feb 20, 2019 at 8:44 AM Sugaya Taichi <sugaya.taichi@socionext.com> wrote: > diff --git a/arch/arm/configs/milbeaut_m10v_defconfig b/arch/arm/configs/milbeaut_m10v_defconfig > new file mode 100644 > index 0000000..a263211 > --- /dev/null > +++ b/arch/arm/configs/milbeaut_m10v_defconfig > @@ -0,0 +1,175 @@ I no longer see anything here that should be turned off, but you might want to run 'make savedefconfig' and use the output of that, to make it easier to keep it up to date. > diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig > index 5bee34a..6753805 100644 > --- a/arch/arm/configs/multi_v7_defconfig > +++ b/arch/arm/configs/multi_v7_defconfig > @@ -54,6 +54,8 @@ CONFIG_SOC_VF610=y > CONFIG_ARCH_KEYSTONE=y > CONFIG_ARCH_MEDIATEK=y > CONFIG_ARCH_MESON=y > +CONFIG_ARCH_MILBEAUT=y > +CONFIG_ARCH_MILBEAUT_M10V=y > CONFIG_ARCH_MVEBU=y > CONFIG_MACH_ARMADA_370=y > CONFIG_MACH_ARMADA_375=y I'm surprised that you don't need to enable any drivers. Does this actually boot on your hardware? Arnd -=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#25): https://linux.kernel.org/g/patchwork-soc/message/25 Mute This Topic: https://linux.kernel.org/mt/29938412/1554929 Group Owner: patchwork-soc+owner@linux.kernel.org Unsubscribe: https://linux.kernel.org/g/patchwork-soc/unsub [patchwork-linux-kernel-org@patchwork.kernel.org] -=-=-=-=-=-=-=-=-=-=-=-
Hi On 2019/02/20 18:28, Arnd Bergmann wrote: > On Wed, Feb 20, 2019 at 8:44 AM Sugaya Taichi > <sugaya.taichi@socionext.com> wrote: > >> diff --git a/arch/arm/configs/milbeaut_m10v_defconfig b/arch/arm/configs/milbeaut_m10v_defconfig >> new file mode 100644 >> index 0000000..a263211 >> --- /dev/null >> +++ b/arch/arm/configs/milbeaut_m10v_defconfig >> @@ -0,0 +1,175 @@ > > I no longer see anything here that should be turned off, but you > might want to run 'make savedefconfig' and use the output of that, > to make it easier to keep it up to date. > I got it, I use the output of 'make savedefconfig'. One question, is that OK to add some options on it? -Because "CONFIG_ARCH_MILBEAUT" was not listed. >> diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig >> index 5bee34a..6753805 100644 >> --- a/arch/arm/configs/multi_v7_defconfig >> +++ b/arch/arm/configs/multi_v7_defconfig >> @@ -54,6 +54,8 @@ CONFIG_SOC_VF610=y >> CONFIG_ARCH_KEYSTONE=y >> CONFIG_ARCH_MEDIATEK=y >> CONFIG_ARCH_MESON=y >> +CONFIG_ARCH_MILBEAUT=y >> +CONFIG_ARCH_MILBEAUT_M10V=y >> CONFIG_ARCH_MVEBU=y >> CONFIG_MACH_ARMADA_370=y >> CONFIG_MACH_ARMADA_375=y > > I'm surprised that you don't need to enable any drivers. Does this actually > boot on your hardware? > Yes, but not exactly. The series has not serial driver, so I add the driver temporarily and confirm the boot log through earlycon. The timer driver is selected by "CONFIG_ARCH_MILBEAUT_M10V", no need to add the the"CONFIG_MILBEAUT_TIMER". Here one more question. Is this OK to submit a core support patch without any serial drivers? Thanks, Sugaya Taichi > Arnd > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel > -=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#26): https://linux.kernel.org/g/patchwork-soc/message/26 Mute This Topic: https://linux.kernel.org/mt/29938412/1554929 Group Owner: patchwork-soc+owner@linux.kernel.org Unsubscribe: https://linux.kernel.org/g/patchwork-soc/unsub [patchwork-linux-kernel-org@patchwork.kernel.org] -=-=-=-=-=-=-=-=-=-=-=-
On Wed, Feb 20, 2019 at 12:27 PM Sugaya, Taichi <sugaya.taichi@socionext.com> wrote: > > Hi > > On 2019/02/20 18:28, Arnd Bergmann wrote: > > On Wed, Feb 20, 2019 at 8:44 AM Sugaya Taichi > > <sugaya.taichi@socionext.com> wrote: > > > >> diff --git a/arch/arm/configs/milbeaut_m10v_defconfig b/arch/arm/configs/milbeaut_m10v_defconfig > >> new file mode 100644 > >> index 0000000..a263211 > >> --- /dev/null > >> +++ b/arch/arm/configs/milbeaut_m10v_defconfig > >> @@ -0,0 +1,175 @@ > > > > I no longer see anything here that should be turned off, but you > > might want to run 'make savedefconfig' and use the output of that, > > to make it easier to keep it up to date. > > > > I got it, I use the output of 'make savedefconfig'. > One question, is that OK to add some options on it? > -Because "CONFIG_ARCH_MILBEAUT" was not listed. What I'd do here is to apply all the patches you want to get merged in the next few releases before running 'savedefconfig' and use the output of that. If you already know that you will need the options, including them now means you don't have to update the defconfig file as much in the future. > >> diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig > >> index 5bee34a..6753805 100644 > >> --- a/arch/arm/configs/multi_v7_defconfig > >> +++ b/arch/arm/configs/multi_v7_defconfig > >> @@ -54,6 +54,8 @@ CONFIG_SOC_VF610=y > >> CONFIG_ARCH_KEYSTONE=y > >> CONFIG_ARCH_MEDIATEK=y > >> CONFIG_ARCH_MESON=y > >> +CONFIG_ARCH_MILBEAUT=y > >> +CONFIG_ARCH_MILBEAUT_M10V=y > >> CONFIG_ARCH_MVEBU=y > >> CONFIG_MACH_ARMADA_370=y > >> CONFIG_MACH_ARMADA_375=y > > > > I'm surprised that you don't need to enable any drivers. Does this actually > > boot on your hardware? > > > > Yes, but not exactly. > The series has not serial driver, so I add the driver temporarily and > confirm the boot log through earlycon. > The timer driver is selected by "CONFIG_ARCH_MILBEAUT_M10V", no need to > add the the"CONFIG_MILBEAUT_TIMER". > > Here one more question. > Is this OK to submit a core support patch without any serial drivers? Yes, we are fairly flexible here. Greg also mentioned in the past that he's fine with having us merge the serial driver through the arm-soc tree after it has been reviewed, to keep it together with the platform support, same thing for the clk, pinctrl, clocksource and irqchip drivers. However, once the platform support is merged, we prefer that you do any other driver changes (including newly added drivers) through the subsystem trees. Arnd -=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#27): https://linux.kernel.org/g/patchwork-soc/message/27 Mute This Topic: https://linux.kernel.org/mt/29938412/1554929 Group Owner: patchwork-soc+owner@linux.kernel.org Unsubscribe: https://linux.kernel.org/g/patchwork-soc/unsub [patchwork-linux-kernel-org@patchwork.kernel.org] -=-=-=-=-=-=-=-=-=-=-=-
Hi Arnd, 2019年2月20日(水) 21:28 Arnd Bergmann <arnd@arndb.de>: > > On Wed, Feb 20, 2019 at 12:27 PM Sugaya, Taichi > <sugaya.taichi@socionext.com> wrote: > > > > Hi > > > > On 2019/02/20 18:28, Arnd Bergmann wrote: > > > On Wed, Feb 20, 2019 at 8:44 AM Sugaya Taichi > > > <sugaya.taichi@socionext.com> wrote: > > > > > >> diff --git a/arch/arm/configs/milbeaut_m10v_defconfig b/arch/arm/configs/milbeaut_m10v_defconfig > > >> new file mode 100644 > > >> index 0000000..a263211 > > >> --- /dev/null > > >> +++ b/arch/arm/configs/milbeaut_m10v_defconfig > > >> @@ -0,0 +1,175 @@ > > > > > > I no longer see anything here that should be turned off, but you > > > might want to run 'make savedefconfig' and use the output of that, > > > to make it easier to keep it up to date. > > > > > > > I got it, I use the output of 'make savedefconfig'. > > One question, is that OK to add some options on it? > > -Because "CONFIG_ARCH_MILBEAUT" was not listed. > > What I'd do here is to apply all the patches you want to get merged in > the next few releases before running 'savedefconfig' and use the output > of that. Let me check. Would you mean that the defconfig will include all those drivers configs, which will not appear at this moment? > If you already know that you will need the options, including > them now means you don't have to update the defconfig file > as much in the future. I just concern that if other subsystem maintainer comments on the config name. Even in that case, can we just update the defconfig with new name? Thank you,
On Wed, Feb 20, 2019 at 2:16 PM Masami Hiramatsu <masami.hiramatsu@linaro.org> wrote: > 2019年2月20日(水) 21:28 Arnd Bergmann <arnd@arndb.de>: > > On Wed, Feb 20, 2019 at 12:27 PM Sugaya, Taichi > > <sugaya.taichi@socionext.com> wrote: > > > On 2019/02/20 18:28, Arnd Bergmann wrote: > > > > On Wed, Feb 20, 2019 at 8:44 AM Sugaya Taichi > > > > <sugaya.taichi@socionext.com> wrote: > > > > > > > >> diff --git a/arch/arm/configs/milbeaut_m10v_defconfig b/arch/arm/configs/milbeaut_m10v_defconfig > > > >> new file mode 100644 > > > >> index 0000000..a263211 > > > >> --- /dev/null > > > >> +++ b/arch/arm/configs/milbeaut_m10v_defconfig > > > >> @@ -0,0 +1,175 @@ > > > > > > > > I no longer see anything here that should be turned off, but you > > > > might want to run 'make savedefconfig' and use the output of that, > > > > to make it easier to keep it up to date. > > > > > > > > > > I got it, I use the output of 'make savedefconfig'. > > > One question, is that OK to add some options on it? > > > -Because "CONFIG_ARCH_MILBEAUT" was not listed. > > > > What I'd do here is to apply all the patches you want to get merged in > > the next few releases before running 'savedefconfig' and use the output > > of that. > > Let me check. Would you mean that the defconfig will include all those > drivers configs, which will not appear at this moment? Correct. > > If you already know that you will need the options, including > > them now means you don't have to update the defconfig file > > as much in the future. > > I just concern that if other subsystem maintainer comments > on the config name. Even in that case, can we just update the > defconfig with new name? Yes, that's easy enough. Arnd -=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#29): https://linux.kernel.org/g/patchwork-soc/message/29 Mute This Topic: https://linux.kernel.org/mt/29938412/1554929 Group Owner: patchwork-soc+owner@linux.kernel.org Unsubscribe: https://linux.kernel.org/g/patchwork-soc/unsub [patchwork-linux-kernel-org@patchwork.kernel.org] -=-=-=-=-=-=-=-=-=-=-=-
Hi Arnd, 2019年2月20日(水) 22:18 Arnd Bergmann <arnd@arndb.de>: > > On Wed, Feb 20, 2019 at 2:16 PM Masami Hiramatsu > <masami.hiramatsu@linaro.org> wrote: > > 2019年2月20日(水) 21:28 Arnd Bergmann <arnd@arndb.de>: > > > On Wed, Feb 20, 2019 at 12:27 PM Sugaya, Taichi > > > <sugaya.taichi@socionext.com> wrote: > > > > On 2019/02/20 18:28, Arnd Bergmann wrote: > > > > > On Wed, Feb 20, 2019 at 8:44 AM Sugaya Taichi > > > > > <sugaya.taichi@socionext.com> wrote: > > > > > > > > > >> diff --git a/arch/arm/configs/milbeaut_m10v_defconfig b/arch/arm/configs/milbeaut_m10v_defconfig > > > > >> new file mode 100644 > > > > >> index 0000000..a263211 > > > > >> --- /dev/null > > > > >> +++ b/arch/arm/configs/milbeaut_m10v_defconfig > > > > >> @@ -0,0 +1,175 @@ > > > > > > > > > > I no longer see anything here that should be turned off, but you > > > > > might want to run 'make savedefconfig' and use the output of that, > > > > > to make it easier to keep it up to date. > > > > > > > > > > > > > I got it, I use the output of 'make savedefconfig'. > > > > One question, is that OK to add some options on it? > > > > -Because "CONFIG_ARCH_MILBEAUT" was not listed. > > > > > > What I'd do here is to apply all the patches you want to get merged in > > > the next few releases before running 'savedefconfig' and use the output > > > of that. > > > > Let me check. Would you mean that the defconfig will include all those > > drivers configs, which will not appear at this moment? > > Correct. > > > > If you already know that you will need the options, including > > > them now means you don't have to update the defconfig file > > > as much in the future. > > > > I just concern that if other subsystem maintainer comments > > on the config name. Even in that case, can we just update the > > defconfig with new name? > > Yes, that's easy enough. OK, I got it :) Thank you! > > Arnd
Hi, On 2019/02/20 22:23, Masami Hiramatsu wrote: > Hi Arnd, > > 2019年2月20日(水) 22:18 Arnd Bergmann <arnd@arndb.de>: >> >> On Wed, Feb 20, 2019 at 2:16 PM Masami Hiramatsu >> <masami.hiramatsu@linaro.org> wrote: >>> 2019年2月20日(水) 21:28 Arnd Bergmann <arnd@arndb.de>: >>>> On Wed, Feb 20, 2019 at 12:27 PM Sugaya, Taichi >>>> <sugaya.taichi@socionext.com> wrote: >>>>> On 2019/02/20 18:28, Arnd Bergmann wrote: >>>>>> On Wed, Feb 20, 2019 at 8:44 AM Sugaya Taichi >>>>>> <sugaya.taichi@socionext.com> wrote: >>>>>> >>>>>>> diff --git a/arch/arm/configs/milbeaut_m10v_defconfig b/arch/arm/configs/milbeaut_m10v_defconfig >>>>>>> new file mode 100644 >>>>>>> index 0000000..a263211 >>>>>>> --- /dev/null >>>>>>> +++ b/arch/arm/configs/milbeaut_m10v_defconfig >>>>>>> @@ -0,0 +1,175 @@ >>>>>> >>>>>> I no longer see anything here that should be turned off, but you >>>>>> might want to run 'make savedefconfig' and use the output of that, >>>>>> to make it easier to keep it up to date. >>>>>> >>>>> >>>>> I got it, I use the output of 'make savedefconfig'. >>>>> One question, is that OK to add some options on it? >>>>> -Because "CONFIG_ARCH_MILBEAUT" was not listed. >>>> >>>> What I'd do here is to apply all the patches you want to get merged in >>>> the next few releases before running 'savedefconfig' and use the output >>>> of that. >>> >>> Let me check. Would you mean that the defconfig will include all those >>> drivers configs, which will not appear at this moment? >> >> Correct. >> >>>> If you already know that you will need the options, including >>>> them now means you don't have to update the defconfig file >>>> as much in the future. >>> >>> I just concern that if other subsystem maintainer comments >>> on the config name. Even in that case, can we just update the >>> defconfig with new name? >> >> Yes, that's easy enough. > > OK, I got it :) > > Thank you! > Thank you for the detail. I got it too. >> >> Arnd > > > -=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#32): https://linux.kernel.org/g/patchwork-soc/message/32 Mute This Topic: https://linux.kernel.org/mt/29938412/1554929 Group Owner: patchwork-soc+owner@linux.kernel.org Unsubscribe: https://linux.kernel.org/g/patchwork-soc/unsub [patchwork-linux-kernel-org@patchwork.kernel.org] -=-=-=-=-=-=-=-=-=-=-=-
diff --git a/arch/arm/configs/milbeaut_m10v_defconfig b/arch/arm/configs/milbeaut_m10v_defconfig new file mode 100644 index 0000000..a263211 --- /dev/null +++ b/arch/arm/configs/milbeaut_m10v_defconfig @@ -0,0 +1,175 @@ +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_DEBUG_SEMIHOSTING=y +CONFIG_DEFAULT_HOSTNAME="mlbel" +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y +CONFIG_NO_HZ_FULL=y +CONFIG_NO_HZ_FULL_ALL=y +CONFIG_NO_HZ_FULL_SYSIDLE=y +CONFIG_NO_HZ_FULL_SYSIDLE_SMALL=4 +CONFIG_HIGH_RES_TIMERS=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_CGROUPS=y +CONFIG_CGROUP_DEBUG=y +CONFIG_CPUSETS=y +CONFIG_CGROUP_SCHED=y +CONFIG_CFS_BANDWIDTH=y +CONFIG_RT_GROUP_SCHED=y +CONFIG_NAMESPACES=y +CONFIG_USER_NS=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_COMPAT_BRK is not set +CONFIG_SLAB=y +CONFIG_PROFILING=y +# CONFIG_OPROFILE=m +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_ARCH_MILBEAUT=y +CONFIG_ARCH_MILBEAUT_M10V=y +# CONFIG_CACHE_L2X0 is not set +CONFIG_ARM_ERRATA_754322=y +CONFIG_ARM_ERRATA_775420=y +CONFIG_SMP=y +# CONFIG_ARM_CPU_TOPOLOGY is not set +CONFIG_HAVE_ARM_ARCH_TIMER=y +CONFIG_PREEMPT=y +CONFIG_THUMB2_KERNEL=y +CONFIG_HIGHMEM=y +# CONFIG_COMPACTION is not set +CONFIG_CMA=y +# CONFIG_ATAGS is not set +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_KEXEC=y +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y +CONFIG_CPUFREQ_DT=y +CONFIG_CPU_IDLE=y +CONFIG_VFP=y +CONFIG_NEON=y +CONFIG_KERNEL_MODE_NEON=y +CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y +CONFIG_UNIX=y +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_DMA_CMA=y +CONFIG_CMA_SIZE_MBYTES=16 +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_LOOP_MIN_COUNT=2 +CONFIG_BLK_DEV_RAM=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_VETH=y +CONFIG_INPUT_POLLDEV=y +# CONFIG_INPUT_MOUSEDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +CONFIG_SERIO_LIBPS2=y +CONFIG_LEGACY_PTY_COUNT=4 +CONFIG_GPIOLIB=y +CONFIG_GPIO_SYSFS=y +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_SOFT_WATCHDOG=m +CONFIG_REGULATOR=y +CONFIG_REGULATOR_DEBUG=y +CONFIG_REGULATOR_S6AP412=y +CONFIG_MEDIA_SUPPORT=y +CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_MEDIA_CONTROLLER=y +CONFIG_VIDEO_ADV_DEBUG=y +CONFIG_SOC_CAMERA=y +CONFIG_SOC_CAMERA_PLATFORM=y +# CONFIG_VGA_ARB is not set +CONFIG_DMADEVICES=y +CONFIG_UIO=y +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_RESET_CONTROLLER=y +CONFIG_EXT4_FS=y +# CONFIG_EXT4_USE_FOR_EXT23 is not set +# CONFIG_XFS_FS is not set +CONFIG_FANOTIFY=y +CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y +CONFIG_QUOTA=y +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set +CONFIG_FSCACHE=y +CONFIG_FSCACHE_STATS=y +CONFIG_FSCACHE_HISTOGRAM=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=932 +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_ROMFS_FS=y +CONFIG_ROMFS_BACKED_BY_BOTH=y +CONFIG_NFS_FS=m +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=y +CONFIG_NLS_CODEPAGE_775=y +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_CODEPAGE_852=y +CONFIG_NLS_CODEPAGE_855=y +CONFIG_NLS_CODEPAGE_857=y +CONFIG_NLS_CODEPAGE_860=y +CONFIG_NLS_CODEPAGE_861=y +CONFIG_NLS_CODEPAGE_862=y +CONFIG_NLS_CODEPAGE_863=y +CONFIG_NLS_CODEPAGE_864=y +CONFIG_NLS_CODEPAGE_865=y +CONFIG_NLS_CODEPAGE_866=y +CONFIG_NLS_CODEPAGE_869=y +CONFIG_NLS_CODEPAGE_936=y +CONFIG_NLS_CODEPAGE_950=y +CONFIG_NLS_CODEPAGE_932=y +CONFIG_NLS_CODEPAGE_949=y +CONFIG_NLS_CODEPAGE_874=y +CONFIG_NLS_ISO8859_8=y +CONFIG_NLS_CODEPAGE_1250=y +CONFIG_NLS_CODEPAGE_1251=y +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=y +CONFIG_NLS_ISO8859_3=y +CONFIG_NLS_ISO8859_4=y +CONFIG_NLS_ISO8859_5=y +CONFIG_NLS_ISO8859_6=y +CONFIG_NLS_ISO8859_7=y +CONFIG_NLS_ISO8859_9=y +CONFIG_NLS_ISO8859_13=y +CONFIG_NLS_ISO8859_14=y +CONFIG_NLS_ISO8859_15=y +CONFIG_NLS_KOI8_R=y +CONFIG_NLS_KOI8_U=y +CONFIG_NLS_MAC_ROMAN=y +CONFIG_NLS_MAC_CELTIC=y +CONFIG_NLS_MAC_CENTEURO=y +CONFIG_NLS_MAC_CROATIAN=y +CONFIG_NLS_MAC_CYRILLIC=y +CONFIG_NLS_MAC_GAELIC=y +CONFIG_NLS_MAC_GREEK=y +CONFIG_NLS_MAC_ICELAND=y +CONFIG_NLS_MAC_INUIT=y +CONFIG_NLS_MAC_ROMANIAN=y +CONFIG_NLS_MAC_TURKISH=y +CONFIG_NLS_UTF8=y +CONFIG_PRINTK_TIME=y +CONFIG_HEADERS_CHECK=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_RCU_CPU_STALL_TIMEOUT=60 +CONFIG_KGDB=y +CONFIG_KEYS=y +CONFIG_ENCRYPTED_KEYS=y +CONFIG_SECURITY=y +CONFIG_FONTS=y diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 5bee34a..6753805 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -54,6 +54,8 @@ CONFIG_SOC_VF610=y CONFIG_ARCH_KEYSTONE=y CONFIG_ARCH_MEDIATEK=y CONFIG_ARCH_MESON=y +CONFIG_ARCH_MILBEAUT=y +CONFIG_ARCH_MILBEAUT_M10V=y CONFIG_ARCH_MVEBU=y CONFIG_MACH_ARMADA_370=y CONFIG_MACH_ARMADA_375=y
This patch adds the minimal defconfig for the Milbeaut M10V. Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com> --- arch/arm/configs/milbeaut_m10v_defconfig | 175 +++++++++++++++++++++++++++++++ arch/arm/configs/multi_v7_defconfig | 2 + 2 files changed, 177 insertions(+) create mode 100644 arch/arm/configs/milbeaut_m10v_defconfig