@@ -11,133 +11,132 @@
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/bitops.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
+#include <linux/mtd/nand.h>
#include <linux/mtd/nand-sw-bch-engine.h>
-#include <linux/bch.h>
/**
- * struct nand_bch_control - private NAND BCH control structure
- * @bch: BCH control structure
- * @errloc: error location array
- * @eccmask: XOR ecc mask, allows erased pages to be decoded as valid
+ * ecc_sw_bch_calculate - Calculate the ECC corresponding to a data block
+ *
+ * @nand: NAND device
+ * @buf: Input buffer with raw data
+ * @code: Output buffer with ECC
*/
-struct nand_bch_control {
- struct bch_control *bch;
- unsigned int *errloc;
- unsigned char *eccmask;
-};
-
-/**
- * nand_bch_calculate_ecc - [NAND Interface] Calculate ECC for data block
- * @chip: NAND chip object
- * @buf: input buffer with raw data
- * @code: output buffer with ECC
- */
-int nand_bch_calculate_ecc(struct nand_chip *chip, const unsigned char *buf,
- unsigned char *code)
+int ecc_sw_bch_calculate(struct nand_device *nand, const unsigned char *buf,
+ unsigned char *code)
{
- struct nand_bch_control *nbc = chip->ecc.priv;
+ struct ecc_sw_bch_conf *engine_conf = nand->ecc.ctx.priv;
unsigned int i;
- memset(code, 0, chip->ecc.bytes);
- encode_bch(nbc->bch, buf, chip->ecc.size, code);
+ memset(code, 0, engine_conf->code_size);
+ encode_bch(engine_conf->bch, buf, nand->ecc.ctx.conf.step_size, code);
/* apply mask so that an erased page is a valid codeword */
- for (i = 0; i < chip->ecc.bytes; i++)
- code[i] ^= nbc->eccmask[i];
+ for (i = 0; i < engine_conf->code_size; i++)
+ code[i] ^= engine_conf->eccmask[i];
return 0;
}
-EXPORT_SYMBOL(nand_bch_calculate_ecc);
+EXPORT_SYMBOL(ecc_sw_bch_calculate);
/**
- * nand_bch_correct_data - [NAND Interface] Detect and correct bit error(s)
- * @chip: NAND chip object
- * @buf: raw data read from the chip
- * @read_ecc: ECC from the chip
- * @calc_ecc: the ECC calculated from raw data
+ * ecc_sw_bch_correct - Detect, correct and report bit error(s)
*
- * Detect and correct bit errors for a data byte block
+ * @nand: NAND device
+ * @buf: Raw data read from the chip
+ * @read_ecc: ECC bytes from the chip
+ * @calc_ecc: ECC calculated from the raw data
+ *
+ * Detect and correct bit errors for a data block.
*/
-int nand_bch_correct_data(struct nand_chip *chip, unsigned char *buf,
- unsigned char *read_ecc, unsigned char *calc_ecc)
+int ecc_sw_bch_correct(struct nand_device *nand, unsigned char *buf,
+ unsigned char *read_ecc, unsigned char *calc_ecc)
{
- struct nand_bch_control *nbc = chip->ecc.priv;
- unsigned int *errloc = nbc->errloc;
+ struct ecc_sw_bch_conf *engine_conf = nand->ecc.ctx.priv;
+ unsigned int step_size = nand->ecc.ctx.conf.step_size;
+ unsigned int *errloc = engine_conf->errloc;
int i, count;
- count = decode_bch(nbc->bch, NULL, chip->ecc.size, read_ecc, calc_ecc,
- NULL, errloc);
+ count = decode_bch(engine_conf->bch, NULL, step_size, read_ecc,
+ calc_ecc, NULL, errloc);
if (count > 0) {
for (i = 0; i < count; i++) {
- if (errloc[i] < (chip->ecc.size*8))
- /* error is located in data, correct it */
+ if (errloc[i] < (step_size * 8))
+ /* The error is in the data: correct it */
buf[errloc[i] >> 3] ^= (1 << (errloc[i] & 7));
- /* else error in ecc, no action needed */
+ /* Otherwise the error is in the ECC: nothing to do */
pr_debug("%s: corrected bitflip %u\n", __func__,
- errloc[i]);
+ errloc[i]);
}
} else if (count < 0) {
- pr_err("ecc unrecoverable error\n");
+ pr_err("ECC unrecoverable error\n");
count = -EBADMSG;
}
+
return count;
}
-EXPORT_SYMBOL(nand_bch_correct_data);
+EXPORT_SYMBOL(ecc_sw_bch_correct);
/**
- * nand_bch_init - [NAND Interface] Initialize NAND BCH error correction
- * @mtd: MTD block structure
+ * ecc_sw_bch_cleanup - Cleanup software BCH ECC resources
+ * @nand: NAND device
+ */
+void ecc_sw_bch_cleanup(struct nand_device *nand)
+{
+ struct ecc_sw_bch_conf *engine_conf = nand->ecc.ctx.priv;
+
+ free_bch(engine_conf->bch);
+ kfree(engine_conf->errloc);
+ kfree(engine_conf->eccmask);
+}
+EXPORT_SYMBOL(ecc_sw_bch_cleanup);
+
+/**
+ * ecc_sw_bch_init - Initialize software BCH ECC engine
+ * @nand: NAND device
*
- * Returns:
- * a pointer to a new NAND BCH control structure, or NULL upon failure
+ * Returns: a pointer to a new NAND BCH control structure, or NULL upon failure
*
- * Initialize NAND BCH error correction. Parameters @eccsize and @eccbytes
- * are used to compute BCH parameters m (Galois field order) and t (error
- * correction capability). @eccbytes should be equal to the number of bytes
- * required to store m*t bits, where m is such that 2^m-1 > @eccsize*8.
+ * Initialize NAND BCH error correction. @nand.ecc parameters 'step_size' and
+ * 'bytes' are used to compute BCH parameters m (Galois field order) and t
+ * (error correction capability). 'bytes' should be equal to the number of bytes
+ * required to store m*t bits, where m is such that 2^m-1 > step_size*8.
*
* Example: to configure 4 bit correction per 512 bytes, you should pass
- * @eccsize = 512 (thus, m=13 is the smallest integer such that 2^m-1 > 512*8)
- * @eccbytes = 7 (7 bytes are required to store m*t = 13*4 = 52 bits)
+ * step_size = 512 (thus, m=13 is the smallest integer such that 2^m-1 > 512*8)
+ * bytes = 7 (7 bytes are required to store m*t = 13*4 = 52 bits)
*/
-struct nand_bch_control *nand_bch_init(struct mtd_info *mtd)
+int ecc_sw_bch_init(struct nand_device *nand)
{
- struct nand_chip *nand = mtd_to_nand(mtd);
+ struct mtd_info *mtd = nanddev_to_mtd(nand);
unsigned int m, t, eccsteps, i;
- struct nand_bch_control *nbc = NULL;
+ struct ecc_sw_bch_conf *engine_conf = nand->ecc.ctx.priv;
unsigned char *erased_page;
- unsigned int eccsize = nand->ecc.size;
- unsigned int eccbytes = nand->ecc.bytes;
- unsigned int eccstrength = nand->ecc.strength;
+ unsigned int eccsize = nand->ecc.ctx.conf.step_size;
+ unsigned int eccbytes = engine_conf->code_size;
+ unsigned int eccstrength = nand->ecc.ctx.conf.strength;
if (!eccbytes && eccstrength) {
eccbytes = DIV_ROUND_UP(eccstrength * fls(8 * eccsize), 8);
- nand->ecc.bytes = eccbytes;
+ engine_conf->code_size = eccbytes;
}
if (!eccsize || !eccbytes) {
pr_warn("ecc parameters not supplied\n");
- goto fail;
+ return -EINVAL;
}
m = fls(1+8*eccsize);
t = (eccbytes*8)/m;
- nbc = kzalloc(sizeof(*nbc), GFP_KERNEL);
- if (!nbc)
- goto fail;
-
- nbc->bch = init_bch(m, t, 0);
- if (!nbc->bch)
- goto fail;
+ engine_conf->bch = init_bch(m, t, 0);
+ if (!engine_conf->bch)
+ return -EINVAL;
/* verify that eccbytes has the expected value */
- if (nbc->bch->ecc_bytes != eccbytes) {
+ if (engine_conf->bch->ecc_bytes != eccbytes) {
pr_warn("invalid eccbytes %u, should be %u\n",
- eccbytes, nbc->bch->ecc_bytes);
+ eccbytes, engine_conf->bch->ecc_bytes);
goto fail;
}
@@ -155,24 +154,15 @@ struct nand_bch_control *nand_bch_init(struct mtd_info *mtd)
goto fail;
}
- /*
- * ecc->steps and ecc->total might be used by mtd->ooblayout->ecc(),
- * which is called by mtd_ooblayout_count_eccbytes().
- * Make sure they are properly initialized before calling
- * mtd_ooblayout_count_eccbytes().
- * FIXME: we should probably rework the sequencing in nand_scan_tail()
- * to avoid setting those fields twice.
- */
- nand->ecc.steps = eccsteps;
- nand->ecc.total = eccsteps * eccbytes;
if (mtd_ooblayout_count_eccbytes(mtd) != (eccsteps*eccbytes)) {
pr_warn("invalid ecc layout\n");
goto fail;
}
- nbc->eccmask = kmalloc(eccbytes, GFP_KERNEL);
- nbc->errloc = kmalloc_array(t, sizeof(*nbc->errloc), GFP_KERNEL);
- if (!nbc->eccmask || !nbc->errloc)
+ engine_conf->eccmask = kmalloc(eccbytes, GFP_KERNEL);
+ engine_conf->errloc = kmalloc_array(t, sizeof(*engine_conf->errloc),
+ GFP_KERNEL);
+ if (!engine_conf->eccmask || !engine_conf->errloc)
goto fail;
/*
* compute and store the inverted ecc of an erased ecc block
@@ -182,37 +172,25 @@ struct nand_bch_control *nand_bch_init(struct mtd_info *mtd)
goto fail;
memset(erased_page, 0xff, eccsize);
- memset(nbc->eccmask, 0, eccbytes);
- encode_bch(nbc->bch, erased_page, eccsize, nbc->eccmask);
+ memset(engine_conf->eccmask, 0, eccbytes);
+ encode_bch(engine_conf->bch, erased_page, eccsize,
+ engine_conf->eccmask);
kfree(erased_page);
for (i = 0; i < eccbytes; i++)
- nbc->eccmask[i] ^= 0xff;
+ engine_conf->eccmask[i] ^= 0xff;
if (!eccstrength)
- nand->ecc.strength = (eccbytes * 8) / fls(8 * eccsize);
+ nand->ecc.ctx.conf.strength = (eccbytes * 8) / fls(8 * eccsize);
+
+ return 0;
- return nbc;
fail:
- nand_bch_free(nbc);
- return NULL;
-}
-EXPORT_SYMBOL(nand_bch_init);
+ ecc_sw_bch_cleanup(nand);
-/**
- * nand_bch_free - [NAND Interface] Release NAND BCH ECC resources
- * @nbc: NAND BCH control structure
- */
-void nand_bch_free(struct nand_bch_control *nbc)
-{
- if (nbc) {
- free_bch(nbc->bch);
- kfree(nbc->errloc);
- kfree(nbc->eccmask);
- kfree(nbc);
- }
+ return -EINVAL;
}
-EXPORT_SYMBOL(nand_bch_free);
+EXPORT_SYMBOL(ecc_sw_bch_init);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Ivan Djelic <ivan.djelic@parrot.com>");
@@ -4843,11 +4843,73 @@ static void nand_scan_ident_cleanup(struct nand_chip *chip)
kfree(chip->parameters.onfi);
}
+int rawnand_sw_bch_init(struct nand_chip *chip)
+{
+ struct nand_device *base = &chip->base;
+ struct ecc_sw_bch_conf *engine_conf;
+ int ret;
+
+ base->ecc.user_conf.mode = NAND_ECC_SOFT;
+ base->ecc.user_conf.algo = NAND_ECC_BCH;
+ base->ecc.user_conf.step_size = chip->ecc.size;
+ base->ecc.user_conf.strength = chip->ecc.strength;
+
+ engine_conf = kzalloc(sizeof(*engine_conf), GFP_KERNEL);
+ if (!engine_conf)
+ return -ENOMEM;
+
+ engine_conf->code_size = chip->ecc.bytes;
+
+ base->ecc.ctx.priv = engine_conf;
+
+ ret = ecc_sw_bch_init(base);
+ if (ret)
+ kfree(base->ecc.ctx.priv);
+
+ chip->ecc.size = base->ecc.ctx.conf.step_size;
+ chip->ecc.strength = base->ecc.ctx.conf.strength;
+ chip->ecc.total = base->ecc.ctx.conf.total;
+ chip->ecc.steps = engine_conf->nsteps;
+ chip->ecc.bytes = engine_conf->code_size;
+
+ return ret;
+}
+EXPORT_SYMBOL(rawnand_sw_bch_init);
+
+static int rawnand_sw_bch_calculate(struct nand_chip *chip,
+ const unsigned char *buf,
+ unsigned char *code)
+{
+ struct nand_device *base = &chip->base;
+
+ return ecc_sw_bch_calculate(base, buf, code);
+}
+
+int rawnand_sw_bch_correct(struct nand_chip *chip, unsigned char *buf,
+ unsigned char *read_ecc, unsigned char *calc_ecc)
+{
+ struct nand_device *base = &chip->base;
+
+ return ecc_sw_bch_correct(base, buf, read_ecc, calc_ecc);
+}
+EXPORT_SYMBOL(rawnand_sw_bch_correct);
+
+void rawnand_sw_bch_cleanup(struct nand_chip *chip)
+{
+ struct nand_device *base = &chip->base;
+
+ ecc_sw_bch_cleanup(base);
+
+ kfree(base->ecc.ctx.priv);
+}
+EXPORT_SYMBOL(rawnand_sw_bch_cleanup);
+
static int nand_set_ecc_soft_ops(struct nand_chip *chip)
{
struct mtd_info *mtd = nand_to_mtd(chip);
struct nand_device *nanddev = mtd_to_nanddev(mtd);
struct nand_ecc_ctrl *ecc = &chip->ecc;
+ int ret;
if (WARN_ON(ecc->mode != NAND_ECC_SOFT))
return -EINVAL;
@@ -4873,12 +4935,12 @@ static int nand_set_ecc_soft_ops(struct nand_chip *chip)
return 0;
case NAND_ECC_BCH:
- if (!mtd_nand_has_bch()) {
+ if (!IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_BCH)) {
WARN(1, "CONFIG_MTD_NAND_ECC_SW_BCH not enabled\n");
return -EINVAL;
}
- ecc->calculate = nand_bch_calculate_ecc;
- ecc->correct = nand_bch_correct_data;
+ ecc->calculate = rawnand_sw_bch_calculate;
+ ecc->correct = rawnand_sw_bch_correct;
ecc->read_page = nand_read_page_swecc;
ecc->read_subpage = nand_read_subpage;
ecc->write_page = nand_write_page_swecc;
@@ -4930,13 +4992,14 @@ static int nand_set_ecc_soft_ops(struct nand_chip *chip)
ecc->strength = bytes * 8 / fls(8 * ecc->size);
}
- /* See nand_bch_init() for details. */
+ /* See ecc_sw_bch_init() for details. */
ecc->bytes = 0;
- ecc->priv = nand_bch_init(mtd);
- if (!ecc->priv) {
+ ret = rawnand_sw_bch_init(chip);
+ if (ret) {
WARN(1, "BCH ECC initialization failed!\n");
- return -EINVAL;
+ return ret;
}
+
return 0;
default:
WARN(1, "Unsupported ECC algorithm!\n");
@@ -5443,13 +5506,17 @@ static int nand_scan_tail(struct nand_chip *chip)
* Set the number of read / write steps for one page depending on ECC
* mode.
*/
- ecc->steps = mtd->writesize / ecc->size;
+ if (!ecc->steps)
+ ecc->steps = mtd->writesize / ecc->size;
if (ecc->steps * ecc->size != mtd->writesize) {
WARN(1, "Invalid ECC parameters\n");
ret = -EINVAL;
goto err_nand_manuf_cleanup;
}
- ecc->total = ecc->steps * ecc->bytes;
+
+ if (!ecc->total)
+ ecc->total = ecc->steps * ecc->bytes;
+
if (ecc->total > mtd->oobsize) {
WARN(1, "Total number of ECC bytes exceeded oobsize\n");
ret = -EINVAL;
@@ -5638,7 +5705,7 @@ void nand_cleanup(struct nand_chip *chip)
{
if (chip->ecc.mode == NAND_ECC_SOFT &&
chip->ecc.algo == NAND_ECC_BCH)
- nand_bch_free((struct nand_bch_control *)chip->ecc.priv);
+ rawnand_sw_bch_cleanup(chip);
/* Free bad block table memory */
kfree(chip->bbt);
@@ -36,7 +36,6 @@
#include <linux/string.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/rawnand.h>
-#include <linux/mtd/nand-sw-bch-engine.h>
#include <linux/mtd/partitions.h>
#include <linux/delay.h>
#include <linux/list.h>
@@ -2175,7 +2174,7 @@ static int ns_attach_chip(struct nand_chip *chip)
if (!bch)
return 0;
- if (!mtd_nand_has_bch()) {
+ if (!IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_BCH)) {
NS_ERR("BCH ECC support is disabled\n");
return -EINVAL;
}
@@ -26,7 +26,6 @@
#include <linux/of.h>
#include <linux/of_device.h>
-#include <linux/mtd/nand-sw-bch-engine.h>
#include <linux/platform_data/elm.h>
#include <linux/omap-gpmc.h>
@@ -2051,16 +2050,16 @@ static int omap_nand_attach_chip(struct nand_chip *chip)
chip->ecc.bytes = 7;
chip->ecc.strength = 4;
chip->ecc.hwctl = omap_enable_hwecc_bch;
- chip->ecc.correct = nand_bch_correct_data;
+ chip->ecc.correct = rawnand_sw_bch_correct;
chip->ecc.calculate = omap_calculate_ecc_bch_sw;
mtd_set_ooblayout(mtd, &omap_sw_ooblayout_ops);
/* Reserve one byte for the OMAP marker */
oobbytes_per_step = chip->ecc.bytes + 1;
/* Software BCH library is used for locating errors */
- chip->ecc.priv = nand_bch_init(mtd);
- if (!chip->ecc.priv) {
+ err = rawnand_sw_bch_init(chip);
+ if (err) {
dev_err(dev, "Unable to use BCH library\n");
- return -EINVAL;
+ return err;
}
break;
@@ -2093,16 +2092,16 @@ static int omap_nand_attach_chip(struct nand_chip *chip)
chip->ecc.bytes = 13;
chip->ecc.strength = 8;
chip->ecc.hwctl = omap_enable_hwecc_bch;
- chip->ecc.correct = nand_bch_correct_data;
+ chip->ecc.correct = rawnand_sw_bch_correct;
chip->ecc.calculate = omap_calculate_ecc_bch_sw;
mtd_set_ooblayout(mtd, &omap_sw_ooblayout_ops);
/* Reserve one byte for the OMAP marker */
oobbytes_per_step = chip->ecc.bytes + 1;
/* Software BCH library is used for locating errors */
- chip->ecc.priv = nand_bch_init(mtd);
- if (!chip->ecc.priv) {
+ err = rawnand_sw_bch_init(chip);
+ if (err) {
dev_err(dev, "unable to use BCH library\n");
- return -EINVAL;
+ return err;
}
break;
@@ -2208,7 +2207,6 @@ static int omap_nand_probe(struct platform_device *pdev)
nand_chip = &info->nand;
mtd = nand_to_mtd(nand_chip);
mtd->dev.parent = &pdev->dev;
- nand_chip->ecc.priv = NULL;
nand_set_flash_node(nand_chip, dev->of_node);
if (!mtd->name) {
@@ -2278,10 +2276,9 @@ static int omap_nand_probe(struct platform_device *pdev)
return_error:
if (!IS_ERR_OR_NULL(info->dma))
dma_release_channel(info->dma);
- if (nand_chip->ecc.priv) {
- nand_bch_free(nand_chip->ecc.priv);
- nand_chip->ecc.priv = NULL;
- }
+
+ rawnand_sw_bch_cleanup(nand_chip);
+
return err;
}
@@ -2290,10 +2287,9 @@ static int omap_nand_remove(struct platform_device *pdev)
struct mtd_info *mtd = platform_get_drvdata(pdev);
struct nand_chip *nand_chip = mtd_to_nand(mtd);
struct omap_nand_info *info = mtd_to_omap(mtd);
- if (nand_chip->ecc.priv) {
- nand_bch_free(nand_chip->ecc.priv);
- nand_chip->ecc.priv = NULL;
- }
+
+ rawnand_sw_bch_cleanup(nand_chip);
+
if (info->dma)
dma_release_channel(info->dma);
nand_release(nand_chip);
@@ -8,58 +8,63 @@
#ifndef __MTD_NAND_ECC_SW_BCH_H__
#define __MTD_NAND_ECC_SW_BCH_H__
-struct mtd_info;
-struct nand_chip;
-struct nand_bch_control;
+#include <linux/mtd/nand.h>
+#include <linux/bch.h>
+
+/**
+ * struct ecc_sw_bch_conf - private software BCH ECC engine structure
+ * @reqooblen: Save the actual user OOB length requested before overwriting it
+ * @code_size: Number of bytes needed to store a code (one code per step)
+ * @nsteps: Number of steps
+ * @calc_buf: Buffer to use when calculating ECC bytes
+ * @code_buf: Buffer to use when reading (raw) ECC bytes from the chip
+ * @bch: BCH control structure
+ * @errloc: error location array
+ * @eccmask: XOR ecc mask, allows erased pages to be decoded as valid
+ */
+struct ecc_sw_bch_conf {
+ unsigned int reqooblen;
+ unsigned int code_size;
+ unsigned int nsteps;
+ u8 *calc_buf;
+ u8 *code_buf;
+ struct bch_control *bch;
+ unsigned int *errloc;
+ unsigned char *eccmask;
+};
#if defined(CONFIG_MTD_NAND_ECC_SW_BCH)
-static inline int mtd_nand_has_bch(void) { return 1; }
-
-/*
- * Calculate BCH ecc code
- */
-int nand_bch_calculate_ecc(struct nand_chip *chip, const u_char *dat,
- u_char *ecc_code);
-
-/*
- * Detect and correct bit errors
- */
-int nand_bch_correct_data(struct nand_chip *chip, u_char *dat,
- u_char *read_ecc, u_char *calc_ecc);
-/*
- * Initialize BCH encoder/decoder
- */
-struct nand_bch_control *nand_bch_init(struct mtd_info *mtd);
-/*
- * Release BCH encoder/decoder resources
- */
-void nand_bch_free(struct nand_bch_control *nbc);
+int ecc_sw_bch_calculate(struct nand_device *nand, const unsigned char *buf,
+ unsigned char *code);
+int ecc_sw_bch_correct(struct nand_device *nand, unsigned char *buf,
+ unsigned char *read_ecc, unsigned char *calc_ecc);
+int ecc_sw_bch_init(struct nand_device *nand);
+void ecc_sw_bch_cleanup(struct nand_device *nand);
#else /* !CONFIG_MTD_NAND_ECC_SW_BCH */
-static inline int mtd_nand_has_bch(void) { return 0; }
-
-static inline int
-nand_bch_calculate_ecc(struct nand_chip *chip, const u_char *dat,
- u_char *ecc_code)
+static inline int ecc_sw_bch_calculate(struct nand_device *nand,
+ const unsigned char *buf,
+ unsigned char *code)
{
- return -1;
+ return -ENOTSUPP;
}
-static inline int
-nand_bch_correct_data(struct nand_chip *chip, unsigned char *buf,
- unsigned char *read_ecc, unsigned char *calc_ecc)
+static inline int ecc_sw_bch_correct(struct nand_device *nand,
+ unsigned char *buf,
+ unsigned char *read_ecc,
+ unsigned char *calc_ecc)
{
return -ENOTSUPP;
}
-static inline struct nand_bch_control *nand_bch_init(struct mtd_info *mtd)
+static inline int ecc_sw_bch_init(struct nand_device *nand)
{
- return NULL;
+ return -EINVAL;
}
-static inline void nand_bch_free(struct nand_bch_control *nbc) {}
+static inline void ecc_sw_bch_cleanup(struct nand_device *nand) {}
#endif /* CONFIG_MTD_NAND_ECC_SW_BCH */
@@ -1232,6 +1232,11 @@ static inline int nand_opcode_8bits(unsigned int command)
return 0;
}
+int rawnand_sw_bch_init(struct nand_chip *chip);
+int rawnand_sw_bch_correct(struct nand_chip *chip, unsigned char *buf,
+ unsigned char *read_ecc, unsigned char *calc_ecc);
+void rawnand_sw_bch_cleanup(struct nand_chip *chip);
+
int nand_check_erased_ecc_chunk(void *data, int datalen,
void *ecc, int ecclen,
void *extraoob, int extraooblen,
Add helpers in the raw NAND core to call the generic functions that will be re-used by the SPI-NAND layer. While at it, do some cleanup in the file and its header. The only reason why rawnand_bch helpers are exported is that the OMAP2 driver uses them. This is something that should be fixed and these helpers turned static. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- drivers/mtd/nand/ecc/sw-bch-engine.c | 192 +++++++++++-------------- drivers/mtd/nand/raw/nand_base.c | 87 +++++++++-- drivers/mtd/nand/raw/nandsim.c | 3 +- drivers/mtd/nand/raw/omap2.c | 32 ++--- include/linux/mtd/nand-sw-bch-engine.h | 77 +++++----- include/linux/mtd/rawnand.h | 5 + 6 files changed, 223 insertions(+), 173 deletions(-)