| Message ID | 1549868579-125090-1-git-send-email-liudongdong3@huawei.com (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Bjorn Helgaas |
| Headers | show |
| Series | [RESEND] PCI/DPC: Fix print AER status in DPC event handling | expand |
On Mon, Feb 11, 2019 at 03:02:59PM +0800, Dongdong Liu wrote: > +static int dpc_get_aer_uncorrect_severity(struct pci_dev *dev, > + struct aer_err_info *info) > +{ > + int pos = dev->aer_cap; > + u32 status, mask, sev; > + > + pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, &status); > + pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, &mask); > + status &= ~mask; > + if (!status) > + return 0; > + > + pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, &sev); > + status &= sev; > + if (status) > + info->severity = AER_FATAL; > + else > + info->severity = AER_NONFATAL; > + > + return 1; > +} > + You can set info->severity to AER_FATAL since that's the only type we enable DPC triggering. > static irqreturn_t dpc_handler(int irq, void *context) > { > struct aer_err_info info; > @@ -229,9 +251,12 @@ static irqreturn_t dpc_handler(int irq, void *context) > /* show RP PIO error detail information */ > if (dpc->rp_extensions && reason == 3 && ext_reason == 0) > dpc_process_rp_pio_error(dpc); > - else if (reason == 0 && aer_get_device_error_info(pdev, &info)) { > + else if (reason == 0 && > + dpc_get_aer_uncorrect_severity(pdev, &info) && > + aer_get_device_error_info(pdev, &info)) { > aer_print_error(pdev, &info); > pci_cleanup_aer_uncorrect_error_status(pdev); > + pci_aer_clear_fatal_status(pdev); Good catch here, but let's clear the pending bits with a single call to pci_cleanup_aer_error_status_regs() rather than NONFATAL and FATAL separately.
Hi Keith Many thanks for your review. 在 2019/2/11 23:46, Keith Busch 写道: > On Mon, Feb 11, 2019 at 03:02:59PM +0800, Dongdong Liu wrote: >> +static int dpc_get_aer_uncorrect_severity(struct pci_dev *dev, >> + struct aer_err_info *info) >> +{ >> + int pos = dev->aer_cap; >> + u32 status, mask, sev; >> + >> + pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, &status); >> + pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, &mask); >> + status &= ~mask; >> + if (!status) >> + return 0; >> + >> + pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, &sev); >> + status &= sev; >> + if (status) >> + info->severity = AER_FATAL; >> + else >> + info->severity = AER_NONFATAL; >> + >> + return 1; >> +} >> + > > You can set info->severity to AER_FATAL since that's the only type we > enable DPC triggering. DPC Trigger Enable 01b-DPC is enabled and is triggered when the Downstream Port detects an unmasked uncorrectable error or when the Downstream Port receives an ERR_FATAL Message. DPC Trigger Reason 00b-DPC was triggered due to an unmasked uncorrectable error reason == 0, due to detect an unmasked uncorrectable error, include non-fatal and fatal error, so need to get the severity. > >> static irqreturn_t dpc_handler(int irq, void *context) >> { >> struct aer_err_info info; >> @@ -229,9 +251,12 @@ static irqreturn_t dpc_handler(int irq, void *context) >> /* show RP PIO error detail information */ >> if (dpc->rp_extensions && reason == 3 && ext_reason == 0) >> dpc_process_rp_pio_error(dpc); >> - else if (reason == 0 && aer_get_device_error_info(pdev, &info)) { >> + else if (reason == 0 && >> + dpc_get_aer_uncorrect_severity(pdev, &info) && >> + aer_get_device_error_info(pdev, &info)) { >> aer_print_error(pdev, &info); >> pci_cleanup_aer_uncorrect_error_status(pdev); >> + pci_aer_clear_fatal_status(pdev); > > Good catch here, but let's clear the pending bits with a single call > to pci_cleanup_aer_error_status_regs() rather than NONFATAL and > FATAL separately. pci_cleanup_aer_error_status_regs() also clear correctable error status. seems not good enough as reason == 0 means detect an unmasked uncorrectable error. Thanks, Dongdong > > . >
On Mon, Feb 11, 2019 at 03:02:59PM +0800, Dongdong Liu wrote: > Current info->severity have not assigned a value before calling > aer_get_device_error_info() and aer_get_device_error_info(), > Fix the bug to get the severity by reading the port's AER status, mask > and severity registers. At the same time, add code to clear the port's > fatal errors. > > Fixes: 8aefa9b0d910 ("PCI/DPC: Print AER status in DPC event handling") > Signed-off-by: Dongdong Liu <liudongdong3@huawei.com> > Cc: stable@vger.kernel.org > Cc: Keith Busch <keith.busch@intel.com> > Cc: Bjorn Helgaas <bhelgaas@google.com> Looks good. Reviewed-by: Keith Busch <keith.busch@intel.com> > --- > drivers/pci/pcie/dpc.c | 27 ++++++++++++++++++++++++++- > 1 file changed, 26 insertions(+), 1 deletion(-) > > diff --git a/drivers/pci/pcie/dpc.c b/drivers/pci/pcie/dpc.c > index e435d12..7b77754 100644 > --- a/drivers/pci/pcie/dpc.c > +++ b/drivers/pci/pcie/dpc.c > @@ -202,6 +202,28 @@ static void dpc_process_rp_pio_error(struct dpc_dev *dpc) > pci_write_config_dword(pdev, cap + PCI_EXP_DPC_RP_PIO_STATUS, status); > } > > +static int dpc_get_aer_uncorrect_severity(struct pci_dev *dev, > + struct aer_err_info *info) > +{ > + int pos = dev->aer_cap; > + u32 status, mask, sev; > + > + pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, &status); > + pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, &mask); > + status &= ~mask; > + if (!status) > + return 0; > + > + pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, &sev); > + status &= sev; > + if (status) > + info->severity = AER_FATAL; > + else > + info->severity = AER_NONFATAL; > + > + return 1; > +} > + > static irqreturn_t dpc_handler(int irq, void *context) > { > struct aer_err_info info; > @@ -229,9 +251,12 @@ static irqreturn_t dpc_handler(int irq, void *context) > /* show RP PIO error detail information */ > if (dpc->rp_extensions && reason == 3 && ext_reason == 0) > dpc_process_rp_pio_error(dpc); > - else if (reason == 0 && aer_get_device_error_info(pdev, &info)) { > + else if (reason == 0 && > + dpc_get_aer_uncorrect_severity(pdev, &info) && > + aer_get_device_error_info(pdev, &info)) { > aer_print_error(pdev, &info); > pci_cleanup_aer_uncorrect_error_status(pdev); > + pci_aer_clear_fatal_status(pdev); > } > > /* We configure DPC so it only triggers on ERR_FATAL */ > -- > 1.9.1 >
On Mon, Feb 11, 2019 at 03:02:59PM +0800, Dongdong Liu wrote: > Current info->severity have not assigned a value before calling > aer_get_device_error_info() and aer_get_device_error_info(), > Fix the bug to get the severity by reading the port's AER status, mask > and severity registers. At the same time, add code to clear the port's > fatal errors. > > Fixes: 8aefa9b0d910 ("PCI/DPC: Print AER status in DPC event handling") > Signed-off-by: Dongdong Liu <liudongdong3@huawei.com> > Cc: stable@vger.kernel.org > Cc: Keith Busch <keith.busch@intel.com> > Cc: Bjorn Helgaas <bhelgaas@google.com> Applied to pci/dpc for v5.1, thanks! > --- > drivers/pci/pcie/dpc.c | 27 ++++++++++++++++++++++++++- > 1 file changed, 26 insertions(+), 1 deletion(-) > > diff --git a/drivers/pci/pcie/dpc.c b/drivers/pci/pcie/dpc.c > index e435d12..7b77754 100644 > --- a/drivers/pci/pcie/dpc.c > +++ b/drivers/pci/pcie/dpc.c > @@ -202,6 +202,28 @@ static void dpc_process_rp_pio_error(struct dpc_dev *dpc) > pci_write_config_dword(pdev, cap + PCI_EXP_DPC_RP_PIO_STATUS, status); > } > > +static int dpc_get_aer_uncorrect_severity(struct pci_dev *dev, > + struct aer_err_info *info) > +{ > + int pos = dev->aer_cap; > + u32 status, mask, sev; > + > + pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, &status); > + pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, &mask); > + status &= ~mask; > + if (!status) > + return 0; > + > + pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, &sev); > + status &= sev; > + if (status) > + info->severity = AER_FATAL; > + else > + info->severity = AER_NONFATAL; > + > + return 1; > +} > + > static irqreturn_t dpc_handler(int irq, void *context) > { > struct aer_err_info info; > @@ -229,9 +251,12 @@ static irqreturn_t dpc_handler(int irq, void *context) > /* show RP PIO error detail information */ > if (dpc->rp_extensions && reason == 3 && ext_reason == 0) > dpc_process_rp_pio_error(dpc); > - else if (reason == 0 && aer_get_device_error_info(pdev, &info)) { > + else if (reason == 0 && > + dpc_get_aer_uncorrect_severity(pdev, &info) && > + aer_get_device_error_info(pdev, &info)) { > aer_print_error(pdev, &info); > pci_cleanup_aer_uncorrect_error_status(pdev); > + pci_aer_clear_fatal_status(pdev); > } > > /* We configure DPC so it only triggers on ERR_FATAL */ > -- > 1.9.1 >
diff --git a/drivers/pci/pcie/dpc.c b/drivers/pci/pcie/dpc.c index e435d12..7b77754 100644 --- a/drivers/pci/pcie/dpc.c +++ b/drivers/pci/pcie/dpc.c @@ -202,6 +202,28 @@ static void dpc_process_rp_pio_error(struct dpc_dev *dpc) pci_write_config_dword(pdev, cap + PCI_EXP_DPC_RP_PIO_STATUS, status); } +static int dpc_get_aer_uncorrect_severity(struct pci_dev *dev, + struct aer_err_info *info) +{ + int pos = dev->aer_cap; + u32 status, mask, sev; + + pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, &status); + pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, &mask); + status &= ~mask; + if (!status) + return 0; + + pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, &sev); + status &= sev; + if (status) + info->severity = AER_FATAL; + else + info->severity = AER_NONFATAL; + + return 1; +} + static irqreturn_t dpc_handler(int irq, void *context) { struct aer_err_info info; @@ -229,9 +251,12 @@ static irqreturn_t dpc_handler(int irq, void *context) /* show RP PIO error detail information */ if (dpc->rp_extensions && reason == 3 && ext_reason == 0) dpc_process_rp_pio_error(dpc); - else if (reason == 0 && aer_get_device_error_info(pdev, &info)) { + else if (reason == 0 && + dpc_get_aer_uncorrect_severity(pdev, &info) && + aer_get_device_error_info(pdev, &info)) { aer_print_error(pdev, &info); pci_cleanup_aer_uncorrect_error_status(pdev); + pci_aer_clear_fatal_status(pdev); } /* We configure DPC so it only triggers on ERR_FATAL */
Current info->severity have not assigned a value before calling aer_get_device_error_info() and aer_get_device_error_info(), Fix the bug to get the severity by reading the port's AER status, mask and severity registers. At the same time, add code to clear the port's fatal errors. Fixes: 8aefa9b0d910 ("PCI/DPC: Print AER status in DPC event handling") Signed-off-by: Dongdong Liu <liudongdong3@huawei.com> Cc: stable@vger.kernel.org Cc: Keith Busch <keith.busch@intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> --- drivers/pci/pcie/dpc.c | 27 ++++++++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-)