| Message ID | 20190227074009.19248-1-bjorn.andersson@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm64: dts: qcom: Add Dragonboard 845c | expand |
On 2/27/2019 12:40 AM, Bjorn Andersson wrote: > This adds an initial dts for the Dragonboard 845. Supported > functionality includes Debug UART, UFS, USB-C (peripheral), USB-A > (host), Ethernet, microSD-card and Bluetooth. > > Initializing the SMMU is clearing the mapping used for the splash screen > framebuffer, which causes the baord to reboot. This can be worked around baord -> board? > using: > > fastboot oem select-display-panel none > > Ethernet and the second USB-A port depends on a functional firmware > loader for the uPD720201. > > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > ---
On Wed, Feb 27, 2019 at 8:39 AM Bjorn Andersson <bjorn.andersson@linaro.org> wrote: > > This adds an initial dts for the Dragonboard 845. Supported > functionality includes Debug UART, UFS, USB-C (peripheral), USB-A > (host), Ethernet, microSD-card and Bluetooth. > > Initializing the SMMU is clearing the mapping used for the splash screen > framebuffer, which causes the baord to reboot. This can be worked around > using: > > fastboot oem select-display-panel none > > Ethernet and the second USB-A port depends on a functional firmware > loader for the uPD720201. > > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > --- > > This depends on the addition of the PCIe controller and PHY nodes, from > https://lore.kernel.org/lkml/20190227070022.31975-1-bjorn.andersson@linaro.org/ > > arch/arm64/boot/dts/qcom/Makefile | 1 + > arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 570 +++++++++++++++++++++ > 2 files changed, 571 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/sdm845-db845c.dts > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index 21d548f02d39..b3fe72ff2955 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8998-mtp.dtb > +dtb-$(CONFIG_ARCH_QCOM) += sdm845-db845c.dtb > dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb > dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb > dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb > diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts > new file mode 100644 > index 000000000000..0a5cfab6f6e2 > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts > @@ -0,0 +1,570 @@ > +// SPDX-License-Identifier: GPL-2.0 > + > +/dts-v1/; > + > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> > +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> > +#include "sdm845.dtsi" > +#include "pm8998.dtsi" > +#include "pmi8998.dtsi" > + > +/ { > + model = "Thundercomm Dragonboard 845c"; > + compatible = "thundercomm,db845c", "qcom,sdm845"; > + > + aliases { > + serial0 = &uart9; > + hsuart0 = &uart6; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + dc12v: dc12v-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "DC12V"; > + regulator-min-microvolt = <12000000>; > + regulator-max-microvolt = <12000000>; > + regulator-always-on; > + }; > + > + lt9611_1v8: lt9611-vdd18-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "LT9611_1V8"; > + > + vin-supply = <&vdc_5v>; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + > + gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + }; > + > + lt9611_3v3: lt9611-3v3 { > + compatible = "regulator-fixed"; > + regulator-name = "LT9611_3V3"; > + > + vin-supply = <&vdc_3v3>; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + > + // TODO: make it possible to drive same GPIO from two clients > + // gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>; > + // enable-active-high; > + }; > + > + pcie0_1p05v: pcie-0-1p05v-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "PCIE0_1.05V"; > + > + vin-supply = <&vbat>; > + regulator-min-microvolt = <1050000>; > + regulator-max-microvolt = <1050000>; > + > + // TODO: make it possible to drive same GPIO from two clients > + // gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>; > + // enable-active-high; > + }; > + > + pcie0_3p3v_dual: vldo-3v3-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "VLDO_3V3"; > + > + vin-supply = <&vbat>; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + > + gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + }; > + > + gpio_keys { > + compatible = "gpio-keys"; > + #address-cells = <1>; > + #size-cells = <0>; > + autorepeat; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&vol_up_pin_a>; > + > + vol-up { > + label = "Volume Up"; > + linux,code = <KEY_VOLUMEUP>; > + gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; > + }; > + }; > + > + leds { > + compatible = "gpio-leds"; > + > + user4 { > + label = "db845c:green:user4"; I think we've agreed to standardize on label names for 96boards compatible boards. https://lore.kernel.org/lkml/20190205192412.GG31919@minitux/ > + gpios = <&pm8998_gpio 13 GPIO_ACTIVE_HIGH>; > + linux,default-trigger = "heartbeat"; > + default-state = "off"; > + }; > + > + wlan { > + label = "db845c:yellow:wlan"; > + gpios = <&pm8998_gpio 9 GPIO_ACTIVE_HIGH>; > + linux,default-trigger = "phy0tx"; > + default-state = "off"; > + }; > + > + bt { > + label = "db845c:blue:bt"; > + gpios = <&pm8998_gpio 5 GPIO_ACTIVE_HIGH>; > + linux,default-trigger = "bluetooth-power"; > + default-state = "off"; > + }; > + }; > + > + v5p0_hdmiout: v5p0-hdmiout-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "V5P0_HDMIOUT"; > + > + vin-supply = <&vdc_5v>; > + regulator-min-microvolt = <500000>; > + regulator-max-microvolt = <500000>; > + > + // TODO: make it possible to drive same GPIO from two clients > + // gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>; > + // enable-active-high; > + }; > + > + vbat: vbat-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "VBAT"; > + > + vin-supply = <&dc12v>; > + regulator-min-microvolt = <4200000>; > + regulator-max-microvolt = <4200000>; > + regulator-always-on; > + }; > + > + vbat_som: vbat-som-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "VBAT_SOM"; > + > + vin-supply = <&dc12v>; > + regulator-min-microvolt = <4200000>; > + regulator-max-microvolt = <4200000>; > + regulator-always-on; > + }; > + > + vdc_3v3: vdc-3v3-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "VDC_3V3"; > + vin-supply = <&dc12v>; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + vdc_5v: vdc-5v-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "VDC_5V"; > + > + vin-supply = <&dc12v>; > + regulator-min-microvolt = <500000>; > + regulator-max-microvolt = <500000>; > + regulator-always-on; > + }; > + > + vreg_s4a_1p8: vreg-s4a-1p8 { > + compatible = "regulator-fixed"; > + regulator-name = "vreg_s4a_1p8"; > + > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + vph_pwr: vph-pwr-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vph_pwr"; > + > + vin-supply = <&vbat_som>; > + }; > +}; > + > +&apps_rsc { > + pm8998-rpmh-regulators { > + compatible = "qcom,pm8998-rpmh-regulators"; > + qcom,pmic-id = "a"; > + vdd-s1-supply = <&vph_pwr>; > + vdd-s2-supply = <&vph_pwr>; > + vdd-s3-supply = <&vph_pwr>; > + vdd-s4-supply = <&vph_pwr>; > + vdd-s5-supply = <&vph_pwr>; > + vdd-s6-supply = <&vph_pwr>; > + vdd-s7-supply = <&vph_pwr>; > + vdd-s8-supply = <&vph_pwr>; > + vdd-s9-supply = <&vph_pwr>; > + vdd-s10-supply = <&vph_pwr>; > + vdd-s11-supply = <&vph_pwr>; > + vdd-s12-supply = <&vph_pwr>; > + vdd-s13-supply = <&vph_pwr>; > + vdd-l1-l27-supply = <&vreg_s7a_1p025>; > + vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; > + vdd-l3-l11-supply = <&vreg_s7a_1p025>; > + vdd-l4-l5-supply = <&vreg_s7a_1p025>; > + vdd-l6-supply = <&vph_pwr>; > + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; > + vdd-l9-supply = <&vreg_bob>; > + vdd-l10-l23-l25-supply = <&vreg_bob>; > + vdd-l13-l19-l21-supply = <&vreg_bob>; > + vdd-l16-l28-supply = <&vreg_bob>; > + vdd-l18-l22-supply = <&vreg_bob>; > + vdd-l20-l24-supply = <&vreg_bob>; > + vdd-l26-supply = <&vreg_s3a_1p35>; > + vin-lvs-1-2-supply = <&vreg_s4a_1p8>; > + > + vreg_s3a_1p35: smps3 { > + regulator-min-microvolt = <1352000>; > + regulator-max-microvolt = <1352000>; > + }; > + > + vreg_s5a_2p04: smps5 { > + regulator-min-microvolt = <1904000>; > + regulator-max-microvolt = <2040000>; > + }; > + > + vreg_s7a_1p025: smps7 { > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <1028000>; > + }; > + > + vreg_l1a_0p875: ldo1 { > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <880000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l12a_1p8: ldo12 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l7a_1p8: ldo7 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l13a_2p95: ldo13 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <2960000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l17a_1p3: ldo17 { > + regulator-min-microvolt = <1304000>; > + regulator-max-microvolt = <1304000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l20a_2p95: ldo20 { > + regulator-min-microvolt = <2960000>; > + regulator-max-microvolt = <2968000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l21a_2p95: ldo21 { > + regulator-min-microvolt = <2960000>; > + regulator-max-microvolt = <2968000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l24a_3p075: ldo24 { > + regulator-min-microvolt = <3088000>; > + regulator-max-microvolt = <3088000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l25a_3p3: ldo25 { > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3312000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l26a_1p2: ldo26 { > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + pmi8998-rpmh-regulators { > + compatible = "qcom,pmi8998-rpmh-regulators"; > + qcom,pmic-id = "b"; > + > + vdd-bob-supply = <&vph_pwr>; > + > + vreg_bob: bob { > + regulator-min-microvolt = <3312000>; > + regulator-max-microvolt = <3600000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; > + regulator-allow-bypass; > + }; > + }; > +}; > + > +&gcc { > + protected-clocks = <GCC_QSPI_CORE_CLK>, > + <GCC_QSPI_CORE_CLK_SRC>, > + <GCC_QSPI_CNOC_PERIPH_AHB_CLK>; > +}; > + > +&pcie0 { > + status = "okay"; > + perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>; > + enable-gpio = <&tlmm 134 GPIO_ACTIVE_HIGH>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&pcie0_perst_state>, <&pcie0_clkreq_state>, <&pcie0_wake_state>; > + > + vddpe-3v3-supply = <&pcie0_3p3v_dual>; > +}; > + > +&pcie0_phy { > + status = "okay"; > + > + vdda-phy-supply = <&vreg_l1a_0p875>; > + vdda-pll-supply = <&vreg_l26a_1p2>; > +}; > + > +&pm8998_gpio { > + vol_up_pin_a: vol-up-active { > + pins = "gpio6"; > + function = "normal"; > + input-enable; > + bias-pull-up; > + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; > + }; > +}; > + > +&pm8998_pon { > + resin { > + compatible = "qcom,pm8941-resin"; > + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; > + debounce = <15625>; > + bias-pull-up; > + linux,code = <KEY_VOLUMEDOWN>; > + }; > +}; > + > +&qupv3_id_0 { > + status = "okay"; > +}; > + > +&qupv3_id_1 { > + status = "okay"; > +}; > + > +&sdhc_2 { > + status = "okay"; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data &sd_card_det_n>; > + > + vmmc-supply = <&vreg_l21a_2p95>; > + vqmmc-supply = <&vreg_l13a_2p95>; > + > + bus-width = <4>; > + cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>; > +}; > + > +&tlmm { > + pcie0_pwren_state: pcie0-pwren { > + pins = "gpio90"; > + function = "gpio"; > + > + drive-strength = <2>; > + bias-disable; > + }; > + > + pcie0_perst_state: pcie0-reset { > + pins = "gpio35"; > + function = "gpio"; > + > + drive-strength = <2>; > + output-low; > + bias-pull-down; > + }; > + > + pcie0_clkreq_state: pcie0-clkreq { > + pins = "gpio36"; > + function = "pci_e0"; > + bias-pull-up; > + }; > + > + pcie0_wake_state: pcie0-wake { > + pins = "gpio37"; > + function = "gpio"; > + > + drive-strength = <2>; > + bias-pull-up; > + }; > + > + sdc2_clk: sdc2-clk { > + pins = "sdc2_clk"; > + bias-disable; > + > + /* > + * It seems that mmc_test reports errors if drive > + * strength is not 16 on clk, cmd, and data pins. > + */ > + drive-strength = <16>; > + }; > + > + sdc2_cmd: sdc2-cmd { > + pins = "sdc2_cmd"; > + bias-pull-up; > + drive-strength = <10>; > + }; > + > + sdc2_data: sdc2-data { > + pins = "sdc2_data"; > + bias-pull-up; > + drive-strength = <10>; > + }; > + > + sd_card_det_n: sd-card-det-n { > + pins = "gpio126"; > + function = "gpio"; > + bias-pull-up; > + }; > +}; > + > +&uart6 { > + status = "okay"; > + > + bluetooth { > + compatible = "qcom,wcn3990-bt"; > + > + vddio-supply = <&vreg_s4a_1p8>; > + vddxo-supply = <&vreg_l7a_1p8>; > + vddrf-supply = <&vreg_l17a_1p3>; > + vddch0-supply = <&vreg_l25a_3p3>; > + max-speed = <3200000>; > + }; > +}; > + > +&uart9 { > + status = "okay"; > +}; > + > +&usb_1 { > + status = "okay"; > +}; > + > +&usb_1_dwc3 { > + dr_mode = "peripheral"; > +}; > + > +&usb_1_hsphy { > + status = "okay"; > + > + vdd-supply = <&vreg_l1a_0p875>; > + vdda-pll-supply = <&vreg_l12a_1p8>; > + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; > + > + qcom,imp-res-offset-value = <8>; > + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>; > + qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>; > + qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>; > +}; > + > +&usb_1_qmpphy { > + status = "okay"; > + > + vdda-phy-supply = <&vreg_l26a_1p2>; > + vdda-pll-supply = <&vreg_l1a_0p875>; > +}; > + > +&usb_2 { > + status = "okay"; > +}; > + > +&usb_2_dwc3 { > + dr_mode = "host"; > +}; > + > +&usb_2_hsphy { > + status = "okay"; > + > + vdd-supply = <&vreg_l1a_0p875>; > + vdda-pll-supply = <&vreg_l12a_1p8>; > + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; > + > + qcom,imp-res-offset-value = <8>; > + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>; > +}; > + > +&usb_2_qmpphy { > + status = "okay"; > + > + vdda-phy-supply = <&vreg_l26a_1p2>; > + vdda-pll-supply = <&vreg_l1a_0p875>; > +}; > + > +&ufs_mem_hc { > + status = "okay"; > + > + vcc-supply = <&vreg_l20a_2p95>; > + vcc-max-microamp = <800000>; > +}; > + > +&ufs_mem_phy { > + status = "okay"; > + > + vdda-phy-supply = <&vreg_l1a_0p875>; > + vdda-pll-supply = <&vreg_l26a_1p2>; > +}; > + > +&wifi { > + status = "okay"; > +}; > + > +/* PINCTRL - additions to nodes defined in sdm845.dtsi */ > + > +&qup_uart6_default { > + pinmux { > + pins = "gpio45", "gpio46", "gpio47", "gpio48"; > + function = "qup6"; > + }; > + > + cts { > + pins = "gpio45"; > + bias-disable; > + }; > + > + rts-tx { > + pins = "gpio46", "gpio47"; > + drive-strength = <2>; > + bias-disable; > + }; > + > + rx { > + pins = "gpio48"; > + bias-pull-up; > + }; > +}; > + > +&qup_uart9_default { > + pinconf-tx { > + pins = "gpio4"; > + drive-strength = <2>; > + bias-disable; > + }; > + > + pinconf-rx { > + pins = "gpio5"; > + drive-strength = <2>; > + bias-pull-up; > + }; > +}; > -- > 2.18.0 >
Hi Bjorn,
I love your patch! Yet something to improve:
[auto build test ERROR on agross/for-next]
[also build test ERROR on v5.0-rc8 next-20190228]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
url: https://github.com/0day-ci/linux/commits/Bjorn-Andersson/arm64-dts-qcom-Add-Dragonboard-845c/20190228-041139
base: https://git.kernel.org/pub/scm/linux/kernel/git/agross/linux.git for-next
config: arm64-allyesconfig (attached as .config)
compiler: aarch64-linux-gnu-gcc (Debian 8.2.0-11) 8.2.0
reproduce:
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
GCC_VERSION=8.2.0 make.cross ARCH=arm64
All errors (new ones prefixed by >>):
>> Error: arch/arm64/boot/dts/qcom/sdm845-db845c.dts:322.1-7 Label or path pcie0 not found
>> Error: arch/arm64/boot/dts/qcom/sdm845-db845c.dts:333.1-11 Label or path pcie0_phy not found
>> FATAL ERROR: Syntax error parsing input tree
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 21d548f02d39..b3fe72ff2955 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-db845c.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts new file mode 100644 index 000000000000..0a5cfab6f6e2 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -0,0 +1,570 @@ +// SPDX-License-Identifier: GPL-2.0 + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sdm845.dtsi" +#include "pm8998.dtsi" +#include "pmi8998.dtsi" + +/ { + model = "Thundercomm Dragonboard 845c"; + compatible = "thundercomm,db845c", "qcom,sdm845"; + + aliases { + serial0 = &uart9; + hsuart0 = &uart6; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + dc12v: dc12v-regulator { + compatible = "regulator-fixed"; + regulator-name = "DC12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + }; + + lt9611_1v8: lt9611-vdd18-regulator { + compatible = "regulator-fixed"; + regulator-name = "LT9611_1V8"; + + vin-supply = <&vdc_5v>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + lt9611_3v3: lt9611-3v3 { + compatible = "regulator-fixed"; + regulator-name = "LT9611_3V3"; + + vin-supply = <&vdc_3v3>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + // TODO: make it possible to drive same GPIO from two clients + // gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>; + // enable-active-high; + }; + + pcie0_1p05v: pcie-0-1p05v-regulator { + compatible = "regulator-fixed"; + regulator-name = "PCIE0_1.05V"; + + vin-supply = <&vbat>; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + + // TODO: make it possible to drive same GPIO from two clients + // gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>; + // enable-active-high; + }; + + pcie0_3p3v_dual: vldo-3v3-regulator { + compatible = "regulator-fixed"; + regulator-name = "VLDO_3V3"; + + vin-supply = <&vbat>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&vol_up_pin_a>; + + vol-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + user4 { + label = "db845c:green:user4"; + gpios = <&pm8998_gpio 13 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + wlan { + label = "db845c:yellow:wlan"; + gpios = <&pm8998_gpio 9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + + bt { + label = "db845c:blue:bt"; + gpios = <&pm8998_gpio 5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "bluetooth-power"; + default-state = "off"; + }; + }; + + v5p0_hdmiout: v5p0-hdmiout-regulator { + compatible = "regulator-fixed"; + regulator-name = "V5P0_HDMIOUT"; + + vin-supply = <&vdc_5v>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <500000>; + + // TODO: make it possible to drive same GPIO from two clients + // gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>; + // enable-active-high; + }; + + vbat: vbat-regulator { + compatible = "regulator-fixed"; + regulator-name = "VBAT"; + + vin-supply = <&dc12v>; + regulator-min-microvolt = <4200000>; + regulator-max-microvolt = <4200000>; + regulator-always-on; + }; + + vbat_som: vbat-som-regulator { + compatible = "regulator-fixed"; + regulator-name = "VBAT_SOM"; + + vin-supply = <&dc12v>; + regulator-min-microvolt = <4200000>; + regulator-max-microvolt = <4200000>; + regulator-always-on; + }; + + vdc_3v3: vdc-3v3-regulator { + compatible = "regulator-fixed"; + regulator-name = "VDC_3V3"; + vin-supply = <&dc12v>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdc_5v: vdc-5v-regulator { + compatible = "regulator-fixed"; + regulator-name = "VDC_5V"; + + vin-supply = <&dc12v>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <500000>; + regulator-always-on; + }; + + vreg_s4a_1p8: vreg-s4a-1p8 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + + vin-supply = <&vbat_som>; + }; +}; + +&apps_rsc { + pm8998-rpmh-regulators { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + vdd-s13-supply = <&vph_pwr>; + vdd-l1-l27-supply = <&vreg_s7a_1p025>; + vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; + vdd-l3-l11-supply = <&vreg_s7a_1p025>; + vdd-l4-l5-supply = <&vreg_s7a_1p025>; + vdd-l6-supply = <&vph_pwr>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; + vdd-l9-supply = <&vreg_bob>; + vdd-l10-l23-l25-supply = <&vreg_bob>; + vdd-l13-l19-l21-supply = <&vreg_bob>; + vdd-l16-l28-supply = <&vreg_bob>; + vdd-l18-l22-supply = <&vreg_bob>; + vdd-l20-l24-supply = <&vreg_bob>; + vdd-l26-supply = <&vreg_s3a_1p35>; + vin-lvs-1-2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p35: smps3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_s5a_2p04: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7a_1p025: smps7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + + vreg_l1a_0p875: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13a_2p95: ldo13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17a_1p3: ldo17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l20a_2p95: ldo20 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2968000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l21a_2p95: ldo21 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2968000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l24a_3p075: ldo24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l25a_3p3: ldo25 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l26a_1p2: ldo26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pmi8998-rpmh-regulators { + compatible = "qcom,pmi8998-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-bypass; + }; + }; +}; + +&gcc { + protected-clocks = <GCC_QSPI_CORE_CLK>, + <GCC_QSPI_CORE_CLK_SRC>, + <GCC_QSPI_CNOC_PERIPH_AHB_CLK>; +}; + +&pcie0 { + status = "okay"; + perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>; + enable-gpio = <&tlmm 134 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_perst_state>, <&pcie0_clkreq_state>, <&pcie0_wake_state>; + + vddpe-3v3-supply = <&pcie0_3p3v_dual>; +}; + +&pcie0_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l26a_1p2>; +}; + +&pm8998_gpio { + vol_up_pin_a: vol-up-active { + pins = "gpio6"; + function = "normal"; + input-enable; + bias-pull-up; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + }; +}; + +&pm8998_pon { + resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_VOLUMEDOWN>; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data &sd_card_det_n>; + + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vreg_l13a_2p95>; + + bus-width = <4>; + cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>; +}; + +&tlmm { + pcie0_pwren_state: pcie0-pwren { + pins = "gpio90"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + pcie0_perst_state: pcie0-reset { + pins = "gpio35"; + function = "gpio"; + + drive-strength = <2>; + output-low; + bias-pull-down; + }; + + pcie0_clkreq_state: pcie0-clkreq { + pins = "gpio36"; + function = "pci_e0"; + bias-pull-up; + }; + + pcie0_wake_state: pcie0-wake { + pins = "gpio37"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + sdc2_clk: sdc2-clk { + pins = "sdc2_clk"; + bias-disable; + + /* + * It seems that mmc_test reports errors if drive + * strength is not 16 on clk, cmd, and data pins. + */ + drive-strength = <16>; + }; + + sdc2_cmd: sdc2-cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + sdc2_data: sdc2-data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + + sd_card_det_n: sd-card-det-n { + pins = "gpio126"; + function = "gpio"; + bias-pull-up; + }; +}; + +&uart6 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + }; +}; + +&uart9 { + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdd-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>; + qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>; + qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l26a_1p2>; + vdda-pll-supply = <&vreg_l1a_0p875>; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; +}; + +&usb_2_hsphy { + status = "okay"; + + vdd-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>; +}; + +&usb_2_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l26a_1p2>; + vdda-pll-supply = <&vreg_l1a_0p875>; +}; + +&ufs_mem_hc { + status = "okay"; + + vcc-supply = <&vreg_l20a_2p95>; + vcc-max-microamp = <800000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l26a_1p2>; +}; + +&wifi { + status = "okay"; +}; + +/* PINCTRL - additions to nodes defined in sdm845.dtsi */ + +&qup_uart6_default { + pinmux { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + function = "qup6"; + }; + + cts { + pins = "gpio45"; + bias-disable; + }; + + rts-tx { + pins = "gpio46", "gpio47"; + drive-strength = <2>; + bias-disable; + }; + + rx { + pins = "gpio48"; + bias-pull-up; + }; +}; + +&qup_uart9_default { + pinconf-tx { + pins = "gpio4"; + drive-strength = <2>; + bias-disable; + }; + + pinconf-rx { + pins = "gpio5"; + drive-strength = <2>; + bias-pull-up; + }; +};
This adds an initial dts for the Dragonboard 845. Supported functionality includes Debug UART, UFS, USB-C (peripheral), USB-A (host), Ethernet, microSD-card and Bluetooth. Initializing the SMMU is clearing the mapping used for the splash screen framebuffer, which causes the baord to reboot. This can be worked around using: fastboot oem select-display-panel none Ethernet and the second USB-A port depends on a functional firmware loader for the uPD720201. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> --- This depends on the addition of the PCIe controller and PHY nodes, from https://lore.kernel.org/lkml/20190227070022.31975-1-bjorn.andersson@linaro.org/ arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 570 +++++++++++++++++++++ 2 files changed, 571 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sdm845-db845c.dts