diff mbox series

[v5,1/2] media: uapi: Add H264 low-level decoder API compound controls.

Message ID 1d374e71ffcc396b71461ea916cac3d957f8d86c.1551964740.git-series.maxime.ripard@bootlin.com (mailing list archive)
State New, archived
Headers show
Series media: cedrus: Add H264 decoding support | expand

Commit Message

Maxime Ripard March 7, 2019, 1:19 p.m. UTC
From: Pawel Osciak <posciak@chromium.org>

Stateless video codecs will require both the H264 metadata and slices in
order to be able to decode frames.

This introduces the definitions for a new pixel format for H264 slices that
have been parsed, as well as the structures used to pass the metadata from
the userspace to the kernel.

Co-Developped-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Pawel Osciak <posciak@chromium.org>
Signed-off-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
 Documentation/media/uapi/v4l/biblio.rst            |   9 +-
 Documentation/media/uapi/v4l/ext-ctrls-codec.rst   | 549 ++++++++++++++-
 Documentation/media/uapi/v4l/pixfmt-compressed.rst |  19 +-
 Documentation/media/uapi/v4l/vidioc-queryctrl.rst  |  30 +-
 Documentation/media/videodev2.h.rst.exceptions     |   5 +-
 drivers/media/v4l2-core/v4l2-ctrls.c               |  42 +-
 drivers/media/v4l2-core/v4l2-ioctl.c               |   1 +-
 include/media/h264-ctrls.h                         | 190 +++++-
 include/media/v4l2-ctrls.h                         |  13 +-
 include/uapi/linux/videodev2.h                     |   1 +-
 10 files changed, 858 insertions(+), 1 deletion(-)
 create mode 100644 include/media/h264-ctrls.h

Comments

Tomasz Figa March 8, 2019, 6:12 a.m. UTC | #1
Hi Maxime,

On Thu, Mar 7, 2019 at 10:20 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote:
>
> From: Pawel Osciak <posciak@chromium.org>
>
> Stateless video codecs will require both the H264 metadata and slices in
> order to be able to decode frames.
>
> This introduces the definitions for a new pixel format for H264 slices that
> have been parsed, as well as the structures used to pass the metadata from
> the userspace to the kernel.
>
> Co-Developped-by: Maxime Ripard <maxime.ripard@bootlin.com>
> Signed-off-by: Pawel Osciak <posciak@chromium.org>
> Signed-off-by: Guenter Roeck <groeck@chromium.org>
> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
> ---
>  Documentation/media/uapi/v4l/biblio.rst            |   9 +-
>  Documentation/media/uapi/v4l/ext-ctrls-codec.rst   | 549 ++++++++++++++-
>  Documentation/media/uapi/v4l/pixfmt-compressed.rst |  19 +-
>  Documentation/media/uapi/v4l/vidioc-queryctrl.rst  |  30 +-
>  Documentation/media/videodev2.h.rst.exceptions     |   5 +-
>  drivers/media/v4l2-core/v4l2-ctrls.c               |  42 +-
>  drivers/media/v4l2-core/v4l2-ioctl.c               |   1 +-
>  include/media/h264-ctrls.h                         | 190 +++++-
>  include/media/v4l2-ctrls.h                         |  13 +-
>  include/uapi/linux/videodev2.h                     |   1 +-
>  10 files changed, 858 insertions(+), 1 deletion(-)
>  create mode 100644 include/media/h264-ctrls.h
>

Thanks for addressing my comments! Few more inline. (Sorry, missed
some previously. :()

> diff --git a/Documentation/media/uapi/v4l/biblio.rst b/Documentation/media/uapi/v4l/biblio.rst
> index ec33768c055e..3fc3f7ff338a 100644
> --- a/Documentation/media/uapi/v4l/biblio.rst
> +++ b/Documentation/media/uapi/v4l/biblio.rst
> @@ -122,6 +122,15 @@ ITU BT.1119
>
>  :author:    International Telecommunication Union (http://www.itu.ch)
>
> +.. _h264:
> +
> +ITU H.264
> +=========
> +
> +:title:     ITU-T Recommendation H.264 "Advanced Video Coding for Generic Audiovisual Services"
> +
> +:author:    International Telecommunication Union (http://www.itu.ch)
> +
>  .. _jfif:
>
>  JFIF
> diff --git a/Documentation/media/uapi/v4l/ext-ctrls-codec.rst b/Documentation/media/uapi/v4l/ext-ctrls-codec.rst
> index 54b3797b67dd..685942f0300e 100644
> --- a/Documentation/media/uapi/v4l/ext-ctrls-codec.rst
> +++ b/Documentation/media/uapi/v4l/ext-ctrls-codec.rst
> @@ -1343,6 +1343,555 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type -
>        - Layer number
>
>
> +.. _v4l2-mpeg-h264:
> +
> +``V4L2_CID_MPEG_VIDEO_H264_SPS (struct)``
> +    Specifies the sequence parameter set (as extracted from the
> +    bitstream) for the associated H264 slice data. This includes the
> +    necessary parameters for configuring a stateless hardware decoding
> +    pipeline for H264.  The bitstream parameters are defined according
> +    to :ref:`h264`. Unless there's a specific comment, refer to the
> +    specification for the documentation of these fields, section 7.4.2.1.1
> +    "Sequence Parameter Set Data Semantics".

I don't see this section being added by this patch. Where does it come from?

> +
> +    .. note::
> +
> +       This compound control is not yet part of the public kernel API and
> +       it is expected to change.
> +
> +.. c:type:: v4l2_ctrl_h264_sps
> +
> +.. cssclass:: longtable
> +
> +.. flat-table:: struct v4l2_ctrl_h264_sps
> +    :header-rows:  0
> +    :stub-columns: 0
> +    :widths:       1 1 2
> +
> +    * - __u8
> +      - ``profile_idc``
> +      -
> +    * - __u8
> +      - ``constraint_set_flags``
> +      - See :ref:`Sequence Parameter Set Constraints Set Flags <h264_sps_constraints_set_flags>`
> +    * - __u8
> +      - ``level_idc``
> +      -
> +    * - __u8
> +      - ``seq_parameter_set_id``
> +      -
> +    * - __u8
> +      - ``chroma_format_idc``
> +      -
> +    * - __u8
> +      - ``bit_depth_luma_minus8``
> +      -
> +    * - __u8
> +      - ``bit_depth_chroma_minus8``
> +      -
> +    * - __u8
> +      - ``log2_max_frame_num_minus4``
> +      -
> +    * - __u8
> +      - ``pic_order_cnt_type``
> +      -
> +    * - __u8
> +      - ``log2_max_pic_order_cnt_lsb_minus4``
> +      -
> +    * - __u8
> +      - ``max_num_ref_frames``
> +      -
> +    * - __u8
> +      - ``num_ref_frames_in_pic_order_cnt_cycle``
> +      -
> +    * - __s32
> +      - ``offset_for_ref_frame[255]``
> +      -
> +    * - __s32
> +      - ``offset_for_non_ref_pic``
> +      -
> +    * - __s32
> +      - ``offset_for_top_to_bottom_field``
> +      -
> +    * - __u16
> +      - ``pic_width_in_mbs_minus1``
> +      -
> +    * - __u16
> +      - ``pic_height_in_map_units_minus1``
> +      -
> +    * - __u32
> +      - ``flags``
> +      - See :ref:`Sequence Parameter Set Flags <h264_sps_flags>`
> +
> +.. _h264_sps_constraints_set_flags:
> +
> +``Sequence Parameter Set Constraints Set Flags``
> +
> +.. cssclass:: longtable
> +
> +.. flat-table::
> +    :header-rows:  0
> +    :stub-columns: 0
> +    :widths:       1 1 2
> +
> +    * - ``V4L2_H264_SPS_CONSTRAINT_SET0_FLAG``
> +      - 0x00000001
> +      -
> +    * - ``V4L2_H264_SPS_CONSTRAINT_SET1_FLAG``
> +      - 0x00000002
> +      -
> +    * - ``V4L2_H264_SPS_CONSTRAINT_SET2_FLAG``
> +      - 0x00000004
> +      -
> +    * - ``V4L2_H264_SPS_CONSTRAINT_SET3_FLAG``
> +      - 0x00000008
> +      -
> +    * - ``V4L2_H264_SPS_CONSTRAINT_SET4_FLAG``
> +      - 0x00000010
> +      -
> +    * - ``V4L2_H264_SPS_CONSTRAINT_SET5_FLAG``
> +      - 0x00000020
> +      -
> +
> +.. _h264_sps_flags:
> +
> +``Sequence Parameter Set Flags``
> +
> +.. cssclass:: longtable
> +
> +.. flat-table::
> +    :header-rows:  0
> +    :stub-columns: 0
> +    :widths:       1 1 2
> +
> +    * - ``V4L2_H264_SPS_FLAG_SEPARATE_COLOUR_PLANE``
> +      - 0x00000001
> +      -
> +    * - ``V4L2_H264_SPS_FLAG_QPPRIME_Y_ZERO_TRANSFORM_BYPASS``
> +      - 0x00000002
> +      -
> +    * - ``V4L2_H264_SPS_FLAG_DELTA_PIC_ORDER_ALWAYS_ZERO``
> +      - 0x00000004
> +      -
> +    * - ``V4L2_H264_SPS_FLAG_GAPS_IN_FRAME_NUM_VALUE_ALLOWED``
> +      - 0x00000008
> +      -
> +    * - ``V4L2_H264_SPS_FLAG_FRAME_MBS_ONLY``
> +      - 0x00000010
> +      -
> +    * - ``V4L2_H264_SPS_FLAG_MB_ADAPTIVE_FRAME_FIELD``
> +      - 0x00000020
> +      -
> +    * - ``V4L2_H264_SPS_FLAG_DIRECT_8X8_INFERENCE``
> +      - 0x00000040
> +      -
> +
> +``V4L2_CID_MPEG_VIDEO_H264_PPS (struct)``
> +    Specifies the picture parameter set (as extracted from the
> +    bitstream) for the associated H264 slice data. This includes the
> +    necessary parameters for configuring a stateless hardware decoding
> +    pipeline for H264.  The bitstream parameters are defined according
> +    to :ref:`h264`. Unless there's a specific comment, refer to the
> +    specification for the documentation of these fields, section 7.4.2.2
> +    "Picture Parameter Set RBSP Semantics".

Ditto.

> +
> +    .. note::
> +
> +       This compound control is not yet part of the public kernel API and
> +       it is expected to change.
> +
> +.. c:type:: v4l2_ctrl_h264_pps
> +
> +.. cssclass:: longtable
> +
> +.. flat-table:: struct v4l2_ctrl_h264_pps
> +    :header-rows:  0
> +    :stub-columns: 0
> +    :widths:       1 1 2
> +
> +    * - __u8
> +      - ``pic_parameter_set_id``
> +      -
> +    * - __u8
> +      - ``seq_parameter_set_id``
> +      -
> +    * - __u8
> +      - ``num_slice_groups_minus1``
> +      -
> +    * - __u8
> +      - ``num_ref_idx_l0_default_active_minus1``
> +      -
> +    * - __u8
> +      - ``num_ref_idx_l1_default_active_minus1``
> +      -
> +    * - __u8
> +      - ``weighted_bipred_idc``
> +      -
> +    * - __s8
> +      - ``pic_init_qp_minus26``
> +      -
> +    * - __s8
> +      - ``pic_init_qs_minus26``
> +      -
> +    * - __s8
> +      - ``chroma_qp_index_offset``
> +      -
> +    * - __s8
> +      - ``second_chroma_qp_index_offset``
> +      -
> +    * - __u16
> +      - ``flags``
> +      - See :ref:`Picture Parameter Set Flags <h264_pps_flags>`
> +
> +.. _h264_pps_flags:
> +
> +``Picture Parameter Set Flags``
> +
> +.. cssclass:: longtable
> +
> +.. flat-table::
> +    :header-rows:  0
> +    :stub-columns: 0
> +    :widths:       1 1 2
> +
> +    * - ``V4L2_H264_PPS_FLAG_ENTROPY_CODING_MODE``
> +      - 0x00000001
> +      -
> +    * - ``V4L2_H264_PPS_FLAG_BOTTOM_FIELD_PIC_ORDER_IN_FRAME_PRESENT``
> +      - 0x00000002
> +      -
> +    * - ``V4L2_H264_PPS_FLAG_WEIGHTED_PRED``
> +      - 0x00000004
> +      -
> +    * - ``V4L2_H264_PPS_FLAG_DEBLOCKING_FILTER_CONTROL_PRESENT``
> +      - 0x00000008
> +      -
> +    * - ``V4L2_H264_PPS_FLAG_CONSTRAINED_INTRA_PRED``
> +      - 0x00000010
> +      -
> +    * - ``V4L2_H264_PPS_FLAG_REDUNDANT_PIC_CNT_PRESENT``
> +      - 0x00000020
> +      -
> +    * - ``V4L2_H264_PPS_FLAG_TRANSFORM_8X8_MODE``
> +      - 0x00000040
> +      -
> +    * - ``V4L2_H264_PPS_FLAG_PIC_SCALING_MATRIX_PRESENT``
> +      - 0x00000080
> +      -
> +
> +``V4L2_CID_MPEG_VIDEO_H264_SCALING_MATRIX (struct)``
> +    Specifies the scaling matrix (as extracted from the bitstream) for
> +    the associated H264 slice data. The bitstream parameters are
> +    defined according to :ref:`h264`. Unless there's a specific
> +    comment, refer to the specification for the documentation of these
> +    fields, section 7.4.2.1.1.1  "Scaling List Semantics".

Ditto.

> +
> +    .. note::
> +
> +       This compound control is not yet part of the public kernel API and
> +       it is expected to change.
> +
> +.. c:type:: v4l2_ctrl_h264_scaling_matrix
> +
> +.. cssclass:: longtable
> +
> +.. flat-table:: struct v4l2_ctrl_h264_scaling_matrix
> +    :header-rows:  0
> +    :stub-columns: 0
> +    :widths:       1 1 2
> +
> +    * - __u8
> +      - ``scaling_list_4x4[6][16]``
> +      -
> +    * - __u8
> +      - ``scaling_list_8x8[6][64]``
> +      -
> +
> +``V4L2_CID_MPEG_VIDEO_H264_SLICE_PARAMS (struct)``
> +    Specifies the slice parameters (as extracted from the bitstream)
> +    for the associated H264 slice data. This includes the necessary
> +    parameters for configuring a stateless hardware decoding pipeline
> +    for H264.  The bitstream parameters are defined according to
> +    :ref:`h264`. Unless there's a specific comment, refer to the
> +    specification for the documentation of these fields, section 7.4.3
> +    "Slice Header Semantics".

Ditto.

> +
> +    .. note::
> +
> +       This compound control is not yet part of the public kernel API
> +       and it is expected to change.
> +
> +       This structure is expected to be passed as an array, with one
> +       entry for each slice included in the bitstream buffer.
> +
> +.. c:type:: v4l2_ctrl_h264_slice_param
> +
> +.. cssclass:: longtable
> +
> +.. flat-table:: struct v4l2_ctrl_h264_slice_param
> +    :header-rows:  0
> +    :stub-columns: 0
> +    :widths:       1 1 2
> +
> +    * - __u32
> +      - ``size``
> +      -
> +    * - __u32
> +      - ``header_bit_size``
> +      -
> +    * - __u16
> +      - ``first_mb_in_slice``
> +      -
> +    * - __u8
> +      - ``slice_type``
> +      -
> +    * - __u8
> +      - ``pic_parameter_set_id``
> +      -
> +    * - __u8
> +      - ``colour_plane_id``
> +      -
> +    * - __u8
> +      - ``redundant_pic_cnt``
> +      -
> +    * - __u16
> +      - ``frame_num``
> +      -
> +    * - __u16
> +      - ``idr_pic_id``
> +      -
> +    * - __u16
> +      - ``pic_order_cnt_lsb``
> +      -
> +    * - __s32
> +      - ``delta_pic_order_cnt_bottom``
> +      -
> +    * - __s32
> +      - ``delta_pic_order_cnt0``
> +      -
> +    * - __s32
> +      - ``delta_pic_order_cnt1``
> +      -
> +    * - struct :c:type:`v4l2_h264_pred_weight_table`
> +      - ``pred_weight_table``
> +      -
> +    * - __u32
> +      - ``dec_ref_pic_marking_bit_size``
> +      -
> +    * - __u32
> +      - ``pic_order_cnt_bit_size``
> +      -
> +    * - __u8
> +      - ``cabac_init_idc``
> +      -
> +    * - __s8
> +      - ``slice_qp_delta``
> +      -
> +    * - __s8
> +      - ``slice_qs_delta``
> +      -
> +    * - __u8
> +      - ``disable_deblocking_filter_idc``
> +      -
> +    * - __s8
> +      - ``slice_alpha_c0_offset_div2``
> +      -
> +    * - __s8
> +      - ``slice_beta_offset_div2``
> +      -
> +    * - __u8
> +      - ``num_ref_idx_l0_active_minus1``
> +      -
> +    * - __u8
> +      - ``num_ref_idx_l1_active_minus1``
> +      -
> +    * - __u32
> +      - ``slice_group_change_cycle``
> +      -
> +    * - __u8
> +      - ``ref_pic_list0[32]``
> +      - Reference picture list after applying the per-slic modifications
> +    * - __u8
> +      - ``ref_pic_list1[32]``
> +      - Reference picture list after applying the per-slic modifications

typo: per-slice

> +    * - __u32
> +      - ``flags``
> +      - See :ref:`Slice Parameter Flags <h264_slice_flags>`
> +
> +.. _h264_slice_flags:
> +
> +``Slice Parameter Set Flags``
> +
> +.. cssclass:: longtable
> +
> +.. flat-table::
> +    :header-rows:  0
> +    :stub-columns: 0
> +    :widths:       1 1 2
> +
> +    * - ``V4L2_H264_SLICE_FLAG_FIELD_PIC``
> +      - 0x00000001
> +      -
> +    * - ``V4L2_H264_SLICE_FLAG_BOTTOM_FIELD``
> +      - 0x00000002
> +      -
> +    * - ``V4L2_H264_SLICE_FLAG_DIRECT_SPATIAL_MV_PRED``
> +      - 0x00000004
> +      -
> +    * - ``V4L2_H264_SLICE_FLAG_SP_FOR_SWITCH``
> +      - 0x00000008
> +      -
> +
> +``Prediction Weight Table``
> +
> +    Unless there's a specific comment, refer to the specification for
> +    the documentation of these fields, section 7.4.3.2 "Prediction
> +    Weight Table Semantics".

Ditto.

> +
> +.. c:type:: v4l2_h264_pred_weight_table
> +
> +.. cssclass:: longtable
> +
> +.. flat-table:: struct v4l2_h264_pred_weight_table
> +    :header-rows:  0
> +    :stub-columns: 0
> +    :widths:       1 1 2
> +
> +    * - __u16
> +      - ``luma_log2_weight_denom``
> +      -
> +    * - __u16
> +      - ``chroma_log2_weight_denom``
> +      -
> +    * - struct :c:type:`v4l2_h264_weight_factors`
> +      - ``weight_factors[2]``
> +      - The weight factors at index 0 are the weight factors for the reference
> +        list 0, the one at index 1 for the reference list 1.
> +
> +.. c:type:: v4l2_h264_weight_factors
> +
> +.. cssclass:: longtable
> +
> +.. flat-table:: struct v4l2_h264_weight_factors
> +    :header-rows:  0
> +    :stub-columns: 0
> +    :widths:       1 1 2
> +
> +    * - __s16
> +      - ``luma_weight[32]``
> +      -
> +    * - __s16
> +      - ``luma_offset[32]``
> +      -
> +    * - __s16
> +      - ``chroma_weight[32][2]``
> +      -
> +    * - __s16
> +      - ``chroma_offset[32][2]``
> +      -
> +
> +``V4L2_CID_MPEG_VIDEO_H264_DECODE_PARAMS (struct)``
> +    Specifies the decode parameters (as extracted from the bitstream)
> +    for the associated H264 slice data. This includes the necessary
> +    parameters for configuring a stateless hardware decoding pipeline
> +    for H264.  The bitstream parameters are defined according to
> +    :ref:`h264`. Unless there's a specific comment, refer to the
> +    specification for the documentation of these fields.
> +
> +    .. note::
> +
> +       This compound control is not yet part of the public kernel API and
> +       it is expected to change.
> +
> +.. c:type:: v4l2_ctrl_h264_decode_param
> +
> +.. cssclass:: longtable
> +
> +.. flat-table:: struct v4l2_ctrl_h264_decode_param
> +    :header-rows:  0
> +    :stub-columns: 0
> +    :widths:       1 1 2
> +
> +    * - __u32
> +      - ``num_slices``
> +      - Number of slices needed to decode the current frame
> +    * - __u16
> +      - ``idr_pic_flag``
> +      - Is the picture an IDR picture?

Sounds like this could be made a flag to be consistent with how this
kind of fields are represented in the other structs.

Best regards,
Tomasz
Maxime Ripard March 13, 2019, 3:31 p.m. UTC | #2
Hi Tomasz,

On Fri, Mar 08, 2019 at 03:12:18PM +0900, Tomasz Figa wrote:
> > +.. _v4l2-mpeg-h264:
> > +
> > +``V4L2_CID_MPEG_VIDEO_H264_SPS (struct)``
> > +    Specifies the sequence parameter set (as extracted from the
> > +    bitstream) for the associated H264 slice data. This includes the
> > +    necessary parameters for configuring a stateless hardware decoding
> > +    pipeline for H264.  The bitstream parameters are defined according
> > +    to :ref:`h264`. Unless there's a specific comment, refer to the
> > +    specification for the documentation of these fields, section 7.4.2.1.1
> > +    "Sequence Parameter Set Data Semantics".
> 
> I don't see this section being added by this patch. Where does it come from?

This is referring to the the H264 spec itself, as I was trying to
point out with the reference in that paragraph. How would you write
this down to make it more obvious?

> > +.. c:type:: v4l2_ctrl_h264_decode_param
> > +
> > +.. cssclass:: longtable
> > +
> > +.. flat-table:: struct v4l2_ctrl_h264_decode_param
> > +    :header-rows:  0
> > +    :stub-columns: 0
> > +    :widths:       1 1 2
> > +
> > +    * - __u32
> > +      - ``num_slices``
> > +      - Number of slices needed to decode the current frame
> > +    * - __u16
> > +      - ``idr_pic_flag``
> > +      - Is the picture an IDR picture?
> 
> Sounds like this could be made a flag to be consistent with how this
> kind of fields are represented in the other structs.

I'll change that, thanks!

Maxime
Tomasz Figa March 14, 2019, 4:13 a.m. UTC | #3
On Thu, Mar 14, 2019 at 12:31 AM Maxime Ripard
<maxime.ripard@bootlin.com> wrote:
>
> Hi Tomasz,
>
> On Fri, Mar 08, 2019 at 03:12:18PM +0900, Tomasz Figa wrote:
> > > +.. _v4l2-mpeg-h264:
> > > +
> > > +``V4L2_CID_MPEG_VIDEO_H264_SPS (struct)``
> > > +    Specifies the sequence parameter set (as extracted from the
> > > +    bitstream) for the associated H264 slice data. This includes the
> > > +    necessary parameters for configuring a stateless hardware decoding
> > > +    pipeline for H264.  The bitstream parameters are defined according
> > > +    to :ref:`h264`. Unless there's a specific comment, refer to the
> > > +    specification for the documentation of these fields, section 7.4.2.1.1
> > > +    "Sequence Parameter Set Data Semantics".
> >
> > I don't see this section being added by this patch. Where does it come from?
>
> This is referring to the the H264 spec itself, as I was trying to
> point out with the reference in that paragraph. How would you write
> this down to make it more obvious?
>

Aha, somehow it didn't come to my mind when reading it. How about
something like below?

Unless there is a specific comment, refer to the ITU-T Rec. H.264
specification, section "7.4.2.1.1 Sequence parameter set data semantics"
(as of the 04/2017 edition).

Best regards,
Tomasz
Maxime Ripard March 18, 2019, 3:47 p.m. UTC | #4
On Thu, Mar 14, 2019 at 01:13:33PM +0900, Tomasz Figa wrote:
> On Thu, Mar 14, 2019 at 12:31 AM Maxime Ripard
> <maxime.ripard@bootlin.com> wrote:
> >
> > Hi Tomasz,
> >
> > On Fri, Mar 08, 2019 at 03:12:18PM +0900, Tomasz Figa wrote:
> > > > +.. _v4l2-mpeg-h264:
> > > > +
> > > > +``V4L2_CID_MPEG_VIDEO_H264_SPS (struct)``
> > > > +    Specifies the sequence parameter set (as extracted from the
> > > > +    bitstream) for the associated H264 slice data. This includes the
> > > > +    necessary parameters for configuring a stateless hardware decoding
> > > > +    pipeline for H264.  The bitstream parameters are defined according
> > > > +    to :ref:`h264`. Unless there's a specific comment, refer to the
> > > > +    specification for the documentation of these fields, section 7.4.2.1.1
> > > > +    "Sequence Parameter Set Data Semantics".
> > >
> > > I don't see this section being added by this patch. Where does it come from?
> >
> > This is referring to the the H264 spec itself, as I was trying to
> > point out with the reference in that paragraph. How would you write
> > this down to make it more obvious?
> >
>
> Aha, somehow it didn't come to my mind when reading it. How about
> something like below?
>
> Unless there is a specific comment, refer to the ITU-T Rec. H.264
> specification, section "7.4.2.1.1 Sequence parameter set data semantics"
> (as of the 04/2017 edition).

The :ref:`h264` currently expands to "ITU H.264", which means in the
documentation, in the case above, it ends up as

 The bitstream parameters are defined according to ITU H.264. Unless
 there’s a specific comment, refer to the specification for the
 documentation of these fields, section 7.4.2.1.1 “Sequence Parameter
 Set Data Semantics”.

I could change the reference to have "ITU-T Rec. H.264 Specification
(04/2017 Edition)". Would that work for you?

Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
Tomasz Figa March 19, 2019, 4:03 a.m. UTC | #5
On Tue, Mar 19, 2019 at 12:47 AM Maxime Ripard
<maxime.ripard@bootlin.com> wrote:
>
> On Thu, Mar 14, 2019 at 01:13:33PM +0900, Tomasz Figa wrote:
> > On Thu, Mar 14, 2019 at 12:31 AM Maxime Ripard
> > <maxime.ripard@bootlin.com> wrote:
> > >
> > > Hi Tomasz,
> > >
> > > On Fri, Mar 08, 2019 at 03:12:18PM +0900, Tomasz Figa wrote:
> > > > > +.. _v4l2-mpeg-h264:
> > > > > +
> > > > > +``V4L2_CID_MPEG_VIDEO_H264_SPS (struct)``
> > > > > +    Specifies the sequence parameter set (as extracted from the
> > > > > +    bitstream) for the associated H264 slice data. This includes the
> > > > > +    necessary parameters for configuring a stateless hardware decoding
> > > > > +    pipeline for H264.  The bitstream parameters are defined according
> > > > > +    to :ref:`h264`. Unless there's a specific comment, refer to the
> > > > > +    specification for the documentation of these fields, section 7.4.2.1.1
> > > > > +    "Sequence Parameter Set Data Semantics".
> > > >
> > > > I don't see this section being added by this patch. Where does it come from?
> > >
> > > This is referring to the the H264 spec itself, as I was trying to
> > > point out with the reference in that paragraph. How would you write
> > > this down to make it more obvious?
> > >
> >
> > Aha, somehow it didn't come to my mind when reading it. How about
> > something like below?
> >
> > Unless there is a specific comment, refer to the ITU-T Rec. H.264
> > specification, section "7.4.2.1.1 Sequence parameter set data semantics"
> > (as of the 04/2017 edition).
>
> The :ref:`h264` currently expands to "ITU H.264", which means in the
> documentation, in the case above, it ends up as
>
>  The bitstream parameters are defined according to ITU H.264. Unless
>  there’s a specific comment, refer to the specification for the
>  documentation of these fields, section 7.4.2.1.1 “Sequence Parameter
>  Set Data Semantics”.
>
> I could change the reference to have "ITU-T Rec. H.264 Specification
> (04/2017 Edition)". Would that work for you?
>

Sounds good to me.

How about tweaking the text a bit too?

The bitstream parameters are defined according to ITU-T Rec. H.264
Specification (04/2017 Edition), section 7.4.2.1.1 “Sequence Parameter
Set Data Semantics”. For further documentation, refer to the above
specification, unless there is an explicit comment stating otherwise.

Best regards,
Tomasz
diff mbox series

Patch

diff --git a/Documentation/media/uapi/v4l/biblio.rst b/Documentation/media/uapi/v4l/biblio.rst
index ec33768c055e..3fc3f7ff338a 100644
--- a/Documentation/media/uapi/v4l/biblio.rst
+++ b/Documentation/media/uapi/v4l/biblio.rst
@@ -122,6 +122,15 @@  ITU BT.1119
 
 :author:    International Telecommunication Union (http://www.itu.ch)
 
+.. _h264:
+
+ITU H.264
+=========
+
+:title:     ITU-T Recommendation H.264 "Advanced Video Coding for Generic Audiovisual Services"
+
+:author:    International Telecommunication Union (http://www.itu.ch)
+
 .. _jfif:
 
 JFIF
diff --git a/Documentation/media/uapi/v4l/ext-ctrls-codec.rst b/Documentation/media/uapi/v4l/ext-ctrls-codec.rst
index 54b3797b67dd..685942f0300e 100644
--- a/Documentation/media/uapi/v4l/ext-ctrls-codec.rst
+++ b/Documentation/media/uapi/v4l/ext-ctrls-codec.rst
@@ -1343,6 +1343,555 @@  enum v4l2_mpeg_video_h264_hierarchical_coding_type -
       - Layer number
 
 
+.. _v4l2-mpeg-h264:
+
+``V4L2_CID_MPEG_VIDEO_H264_SPS (struct)``
+    Specifies the sequence parameter set (as extracted from the
+    bitstream) for the associated H264 slice data. This includes the
+    necessary parameters for configuring a stateless hardware decoding
+    pipeline for H264.  The bitstream parameters are defined according
+    to :ref:`h264`. Unless there's a specific comment, refer to the
+    specification for the documentation of these fields, section 7.4.2.1.1
+    "Sequence Parameter Set Data Semantics".
+
+    .. note::
+
+       This compound control is not yet part of the public kernel API and
+       it is expected to change.
+
+.. c:type:: v4l2_ctrl_h264_sps
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_ctrl_h264_sps
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u8
+      - ``profile_idc``
+      -
+    * - __u8
+      - ``constraint_set_flags``
+      - See :ref:`Sequence Parameter Set Constraints Set Flags <h264_sps_constraints_set_flags>`
+    * - __u8
+      - ``level_idc``
+      -
+    * - __u8
+      - ``seq_parameter_set_id``
+      -
+    * - __u8
+      - ``chroma_format_idc``
+      -
+    * - __u8
+      - ``bit_depth_luma_minus8``
+      -
+    * - __u8
+      - ``bit_depth_chroma_minus8``
+      -
+    * - __u8
+      - ``log2_max_frame_num_minus4``
+      -
+    * - __u8
+      - ``pic_order_cnt_type``
+      -
+    * - __u8
+      - ``log2_max_pic_order_cnt_lsb_minus4``
+      -
+    * - __u8
+      - ``max_num_ref_frames``
+      -
+    * - __u8
+      - ``num_ref_frames_in_pic_order_cnt_cycle``
+      -
+    * - __s32
+      - ``offset_for_ref_frame[255]``
+      -
+    * - __s32
+      - ``offset_for_non_ref_pic``
+      -
+    * - __s32
+      - ``offset_for_top_to_bottom_field``
+      -
+    * - __u16
+      - ``pic_width_in_mbs_minus1``
+      -
+    * - __u16
+      - ``pic_height_in_map_units_minus1``
+      -
+    * - __u32
+      - ``flags``
+      - See :ref:`Sequence Parameter Set Flags <h264_sps_flags>`
+
+.. _h264_sps_constraints_set_flags:
+
+``Sequence Parameter Set Constraints Set Flags``
+
+.. cssclass:: longtable
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - ``V4L2_H264_SPS_CONSTRAINT_SET0_FLAG``
+      - 0x00000001
+      -
+    * - ``V4L2_H264_SPS_CONSTRAINT_SET1_FLAG``
+      - 0x00000002
+      -
+    * - ``V4L2_H264_SPS_CONSTRAINT_SET2_FLAG``
+      - 0x00000004
+      -
+    * - ``V4L2_H264_SPS_CONSTRAINT_SET3_FLAG``
+      - 0x00000008
+      -
+    * - ``V4L2_H264_SPS_CONSTRAINT_SET4_FLAG``
+      - 0x00000010
+      -
+    * - ``V4L2_H264_SPS_CONSTRAINT_SET5_FLAG``
+      - 0x00000020
+      -
+
+.. _h264_sps_flags:
+
+``Sequence Parameter Set Flags``
+
+.. cssclass:: longtable
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - ``V4L2_H264_SPS_FLAG_SEPARATE_COLOUR_PLANE``
+      - 0x00000001
+      -
+    * - ``V4L2_H264_SPS_FLAG_QPPRIME_Y_ZERO_TRANSFORM_BYPASS``
+      - 0x00000002
+      -
+    * - ``V4L2_H264_SPS_FLAG_DELTA_PIC_ORDER_ALWAYS_ZERO``
+      - 0x00000004
+      -
+    * - ``V4L2_H264_SPS_FLAG_GAPS_IN_FRAME_NUM_VALUE_ALLOWED``
+      - 0x00000008
+      -
+    * - ``V4L2_H264_SPS_FLAG_FRAME_MBS_ONLY``
+      - 0x00000010
+      -
+    * - ``V4L2_H264_SPS_FLAG_MB_ADAPTIVE_FRAME_FIELD``
+      - 0x00000020
+      -
+    * - ``V4L2_H264_SPS_FLAG_DIRECT_8X8_INFERENCE``
+      - 0x00000040
+      -
+
+``V4L2_CID_MPEG_VIDEO_H264_PPS (struct)``
+    Specifies the picture parameter set (as extracted from the
+    bitstream) for the associated H264 slice data. This includes the
+    necessary parameters for configuring a stateless hardware decoding
+    pipeline for H264.  The bitstream parameters are defined according
+    to :ref:`h264`. Unless there's a specific comment, refer to the
+    specification for the documentation of these fields, section 7.4.2.2
+    "Picture Parameter Set RBSP Semantics".
+
+    .. note::
+
+       This compound control is not yet part of the public kernel API and
+       it is expected to change.
+
+.. c:type:: v4l2_ctrl_h264_pps
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_ctrl_h264_pps
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u8
+      - ``pic_parameter_set_id``
+      -
+    * - __u8
+      - ``seq_parameter_set_id``
+      -
+    * - __u8
+      - ``num_slice_groups_minus1``
+      -
+    * - __u8
+      - ``num_ref_idx_l0_default_active_minus1``
+      -
+    * - __u8
+      - ``num_ref_idx_l1_default_active_minus1``
+      -
+    * - __u8
+      - ``weighted_bipred_idc``
+      -
+    * - __s8
+      - ``pic_init_qp_minus26``
+      -
+    * - __s8
+      - ``pic_init_qs_minus26``
+      -
+    * - __s8
+      - ``chroma_qp_index_offset``
+      -
+    * - __s8
+      - ``second_chroma_qp_index_offset``
+      -
+    * - __u16
+      - ``flags``
+      - See :ref:`Picture Parameter Set Flags <h264_pps_flags>`
+
+.. _h264_pps_flags:
+
+``Picture Parameter Set Flags``
+
+.. cssclass:: longtable
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - ``V4L2_H264_PPS_FLAG_ENTROPY_CODING_MODE``
+      - 0x00000001
+      -
+    * - ``V4L2_H264_PPS_FLAG_BOTTOM_FIELD_PIC_ORDER_IN_FRAME_PRESENT``
+      - 0x00000002
+      -
+    * - ``V4L2_H264_PPS_FLAG_WEIGHTED_PRED``
+      - 0x00000004
+      -
+    * - ``V4L2_H264_PPS_FLAG_DEBLOCKING_FILTER_CONTROL_PRESENT``
+      - 0x00000008
+      -
+    * - ``V4L2_H264_PPS_FLAG_CONSTRAINED_INTRA_PRED``
+      - 0x00000010
+      -
+    * - ``V4L2_H264_PPS_FLAG_REDUNDANT_PIC_CNT_PRESENT``
+      - 0x00000020
+      -
+    * - ``V4L2_H264_PPS_FLAG_TRANSFORM_8X8_MODE``
+      - 0x00000040
+      -
+    * - ``V4L2_H264_PPS_FLAG_PIC_SCALING_MATRIX_PRESENT``
+      - 0x00000080
+      -
+
+``V4L2_CID_MPEG_VIDEO_H264_SCALING_MATRIX (struct)``
+    Specifies the scaling matrix (as extracted from the bitstream) for
+    the associated H264 slice data. The bitstream parameters are
+    defined according to :ref:`h264`. Unless there's a specific
+    comment, refer to the specification for the documentation of these
+    fields, section 7.4.2.1.1.1  "Scaling List Semantics".
+
+    .. note::
+
+       This compound control is not yet part of the public kernel API and
+       it is expected to change.
+
+.. c:type:: v4l2_ctrl_h264_scaling_matrix
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_ctrl_h264_scaling_matrix
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u8
+      - ``scaling_list_4x4[6][16]``
+      -
+    * - __u8
+      - ``scaling_list_8x8[6][64]``
+      -
+
+``V4L2_CID_MPEG_VIDEO_H264_SLICE_PARAMS (struct)``
+    Specifies the slice parameters (as extracted from the bitstream)
+    for the associated H264 slice data. This includes the necessary
+    parameters for configuring a stateless hardware decoding pipeline
+    for H264.  The bitstream parameters are defined according to
+    :ref:`h264`. Unless there's a specific comment, refer to the
+    specification for the documentation of these fields, section 7.4.3
+    "Slice Header Semantics".
+
+    .. note::
+
+       This compound control is not yet part of the public kernel API
+       and it is expected to change.
+
+       This structure is expected to be passed as an array, with one
+       entry for each slice included in the bitstream buffer.
+
+.. c:type:: v4l2_ctrl_h264_slice_param
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_ctrl_h264_slice_param
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``size``
+      -
+    * - __u32
+      - ``header_bit_size``
+      -
+    * - __u16
+      - ``first_mb_in_slice``
+      -
+    * - __u8
+      - ``slice_type``
+      -
+    * - __u8
+      - ``pic_parameter_set_id``
+      -
+    * - __u8
+      - ``colour_plane_id``
+      -
+    * - __u8
+      - ``redundant_pic_cnt``
+      -
+    * - __u16
+      - ``frame_num``
+      -
+    * - __u16
+      - ``idr_pic_id``
+      -
+    * - __u16
+      - ``pic_order_cnt_lsb``
+      -
+    * - __s32
+      - ``delta_pic_order_cnt_bottom``
+      -
+    * - __s32
+      - ``delta_pic_order_cnt0``
+      -
+    * - __s32
+      - ``delta_pic_order_cnt1``
+      -
+    * - struct :c:type:`v4l2_h264_pred_weight_table`
+      - ``pred_weight_table``
+      -
+    * - __u32
+      - ``dec_ref_pic_marking_bit_size``
+      -
+    * - __u32
+      - ``pic_order_cnt_bit_size``
+      -
+    * - __u8
+      - ``cabac_init_idc``
+      -
+    * - __s8
+      - ``slice_qp_delta``
+      -
+    * - __s8
+      - ``slice_qs_delta``
+      -
+    * - __u8
+      - ``disable_deblocking_filter_idc``
+      -
+    * - __s8
+      - ``slice_alpha_c0_offset_div2``
+      -
+    * - __s8
+      - ``slice_beta_offset_div2``
+      -
+    * - __u8
+      - ``num_ref_idx_l0_active_minus1``
+      -
+    * - __u8
+      - ``num_ref_idx_l1_active_minus1``
+      -
+    * - __u32
+      - ``slice_group_change_cycle``
+      -
+    * - __u8
+      - ``ref_pic_list0[32]``
+      - Reference picture list after applying the per-slic modifications
+    * - __u8
+      - ``ref_pic_list1[32]``
+      - Reference picture list after applying the per-slic modifications
+    * - __u32
+      - ``flags``
+      - See :ref:`Slice Parameter Flags <h264_slice_flags>`
+
+.. _h264_slice_flags:
+
+``Slice Parameter Set Flags``
+
+.. cssclass:: longtable
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - ``V4L2_H264_SLICE_FLAG_FIELD_PIC``
+      - 0x00000001
+      -
+    * - ``V4L2_H264_SLICE_FLAG_BOTTOM_FIELD``
+      - 0x00000002
+      -
+    * - ``V4L2_H264_SLICE_FLAG_DIRECT_SPATIAL_MV_PRED``
+      - 0x00000004
+      -
+    * - ``V4L2_H264_SLICE_FLAG_SP_FOR_SWITCH``
+      - 0x00000008
+      -
+
+``Prediction Weight Table``
+
+    Unless there's a specific comment, refer to the specification for
+    the documentation of these fields, section 7.4.3.2 "Prediction
+    Weight Table Semantics".
+
+.. c:type:: v4l2_h264_pred_weight_table
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_h264_pred_weight_table
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u16
+      - ``luma_log2_weight_denom``
+      -
+    * - __u16
+      - ``chroma_log2_weight_denom``
+      -
+    * - struct :c:type:`v4l2_h264_weight_factors`
+      - ``weight_factors[2]``
+      - The weight factors at index 0 are the weight factors for the reference
+        list 0, the one at index 1 for the reference list 1.
+
+.. c:type:: v4l2_h264_weight_factors
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_h264_weight_factors
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __s16
+      - ``luma_weight[32]``
+      -
+    * - __s16
+      - ``luma_offset[32]``
+      -
+    * - __s16
+      - ``chroma_weight[32][2]``
+      -
+    * - __s16
+      - ``chroma_offset[32][2]``
+      -
+
+``V4L2_CID_MPEG_VIDEO_H264_DECODE_PARAMS (struct)``
+    Specifies the decode parameters (as extracted from the bitstream)
+    for the associated H264 slice data. This includes the necessary
+    parameters for configuring a stateless hardware decoding pipeline
+    for H264.  The bitstream parameters are defined according to
+    :ref:`h264`. Unless there's a specific comment, refer to the
+    specification for the documentation of these fields.
+
+    .. note::
+
+       This compound control is not yet part of the public kernel API and
+       it is expected to change.
+
+.. c:type:: v4l2_ctrl_h264_decode_param
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_ctrl_h264_decode_param
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``num_slices``
+      - Number of slices needed to decode the current frame
+    * - __u16
+      - ``idr_pic_flag``
+      - Is the picture an IDR picture?
+    * - __u16
+      - ``nal_ref_idc``
+      - NAL reference ID value coming from the NAL Unit header
+    * - __u8
+      - ``ref_pic_list_p0[32]``
+      - Backward reference list used by P-frames in the original bitstream order
+    * - __u8
+      - ``ref_pic_list_b0[32]``
+      - Backward reference list used by B-frames in the original bitstream order
+    * - __u8
+      - ``ref_pic_list_b1[32]``
+      - Forward reference list used by B-frames in the original bitstream order
+    * - __s32
+      - ``top_field_order_cnt``
+      - Picture Order Count for the coded top field
+    * - __s32
+      - ``bottom_field_order_cnt``
+      - Picture Order Count for the coded bottom field
+    * - struct :c:type:`v4l2_h264_dpb_entry`
+      - ``dpb[16]``
+      -
+
+.. c:type:: v4l2_h264_dpb_entry
+
+.. cssclass:: longtable
+
+.. flat-table:: struct v4l2_h264_dpb_entry
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``timestamp``
+      - Timestamp of the V4L2 capture buffer to use as reference, used
+        with B-coded and P-coded frames. The timestamp refers to the
+	``timestamp`` field in struct :c:type:`v4l2_buffer`. Use the
+	:c:func:`v4l2_timeval_to_ns()` function to convert the struct
+	:c:type:`timeval` in struct :c:type:`v4l2_buffer` to a __u64.
+    * - __u16
+      - ``frame_num``
+      -
+    * - __u16
+      - ``pic_num``
+      -
+    * - __s32
+      - ``top_field_order_cnt``
+      -
+    * - __s32
+      - ``bottom_field_order_cnt``
+      -
+    * - __u32
+      - ``flags``
+      - See :ref:`DPB Entry Flags <h264_dpb_flags>`
+
+.. _h264_dpb_flags:
+
+``DPB Entries Flags``
+
+.. cssclass:: longtable
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - ``V4L2_H264_DPB_ENTRY_FLAG_VALID``
+      - 0x00000001
+      - The DPB entry is valid and should be considered
+    * - ``V4L2_H264_DPB_ENTRY_FLAG_ACTIVE``
+      - 0x00000002
+      - The DPB entry is currently being used as a reference frame
+    * - ``V4L2_H264_DPB_ENTRY_FLAG_LONG_TERM``
+      - 0x00000004
+      - The DPB entry is a long term reference frame
 
 .. _v4l2-mpeg-mpeg2:
 
diff --git a/Documentation/media/uapi/v4l/pixfmt-compressed.rst b/Documentation/media/uapi/v4l/pixfmt-compressed.rst
index 2675bef3eefe..8e5cc0b10b95 100644
--- a/Documentation/media/uapi/v4l/pixfmt-compressed.rst
+++ b/Documentation/media/uapi/v4l/pixfmt-compressed.rst
@@ -52,6 +52,25 @@  Compressed Formats
       - ``V4L2_PIX_FMT_H264_MVC``
       - 'M264'
       - H264 MVC video elementary stream.
+    * .. _V4L2-PIX-FMT-H264-SLICE:
+
+      - ``V4L2_PIX_FMT_H264_SLICE_RAW``
+      - 'S264'
+      - H264 parsed slice data, as extracted from the H264 bitstream.
+	This format is adapted for stateless video decoders that
+	implement an H264 pipeline (using the :ref:`codec` and
+	:ref:`media-request-api`).  Metadata associated with the frame
+	to decode are required to be passed through the
+	``V4L2_CID_MPEG_VIDEO_H264_SPS``,
+	``V4L2_CID_MPEG_VIDEO_H264_PPS``,
+	``V4L2_CID_MPEG_VIDEO_H264_SCALING_MATRIX``,
+	``V4L2_CID_MPEG_VIDEO_H264_SLICE_PARAMS`` and
+	``V4L2_CID_MPEG_VIDEO_H264_DECODE_PARAMS`` controls.  See the
+	:ref:`associated Codec Control IDs <v4l2-mpeg-h264>`.
+	Exactly one output and one capture buffer must be provided for
+	use with this pixel format. The output buffer must contain the
+	appropriate number of macroblocks to decode a full
+	corresponding frame to the matching capture buffer.
     * .. _V4L2-PIX-FMT-H263:
 
       - ``V4L2_PIX_FMT_H263``
diff --git a/Documentation/media/uapi/v4l/vidioc-queryctrl.rst b/Documentation/media/uapi/v4l/vidioc-queryctrl.rst
index f824162d0ea9..bf29dc5b9758 100644
--- a/Documentation/media/uapi/v4l/vidioc-queryctrl.rst
+++ b/Documentation/media/uapi/v4l/vidioc-queryctrl.rst
@@ -443,6 +443,36 @@  See also the examples in :ref:`control`.
       - n/a
       - A struct :c:type:`v4l2_ctrl_mpeg2_quantization`, containing MPEG-2
 	quantization matrices for stateless video decoders.
+    * - ``V4L2_CTRL_TYPE_H264_SPS``
+      - n/a
+      - n/a
+      - n/a
+      - A struct :c:type:`v4l2_ctrl_h264_sps`, containing H264
+	sequence parameters for stateless video decoders.
+    * - ``V4L2_CTRL_TYPE_H264_PPS``
+      - n/a
+      - n/a
+      - n/a
+      - A struct :c:type:`v4l2_ctrl_h264_pps`, containing H264
+	picture parameters for stateless video decoders.
+    * - ``V4L2_CTRL_TYPE_H264_SCALING_MATRIX``
+      - n/a
+      - n/a
+      - n/a
+      - A struct :c:type:`v4l2_ctrl_h264_scaling_matrix`, containing H264
+	scaling matrices for stateless video decoders.
+    * - ``V4L2_CTRL_TYPE_H264_SLICE_PARAMS``
+      - n/a
+      - n/a
+      - n/a
+      - A struct :c:type:`v4l2_ctrl_h264_slice_param`, containing H264
+	slice parameters for stateless video decoders.
+    * - ``V4L2_CTRL_TYPE_H264_DECODE_PARAMS``
+      - n/a
+      - n/a
+      - n/a
+      - A struct :c:type:`v4l2_ctrl_h264_decode_param`, containing H264
+	decode parameters for stateless video decoders.
 
 .. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
 
diff --git a/Documentation/media/videodev2.h.rst.exceptions b/Documentation/media/videodev2.h.rst.exceptions
index 64d348e67df9..55cbe324b9fc 100644
--- a/Documentation/media/videodev2.h.rst.exceptions
+++ b/Documentation/media/videodev2.h.rst.exceptions
@@ -136,6 +136,11 @@  replace symbol V4L2_CTRL_TYPE_U32 :c:type:`v4l2_ctrl_type`
 replace symbol V4L2_CTRL_TYPE_U8 :c:type:`v4l2_ctrl_type`
 replace symbol V4L2_CTRL_TYPE_MPEG2_SLICE_PARAMS :c:type:`v4l2_ctrl_type`
 replace symbol V4L2_CTRL_TYPE_MPEG2_QUANTIZATION :c:type:`v4l2_ctrl_type`
+replace symbol V4L2_CTRL_TYPE_H264_SPS :c:type:`v4l2_ctrl_type`
+replace symbol V4L2_CTRL_TYPE_H264_PPS :c:type:`v4l2_ctrl_type`
+replace symbol V4L2_CTRL_TYPE_H264_SCALING_MATRIX :c:type:`v4l2_ctrl_type`
+replace symbol V4L2_CTRL_TYPE_H264_SLICE_PARAMS :c:type:`v4l2_ctrl_type`
+replace symbol V4L2_CTRL_TYPE_H264_DECODE_PARAMS :c:type:`v4l2_ctrl_type`
 
 # V4L2 capability defines
 replace define V4L2_CAP_VIDEO_CAPTURE device-capabilities
diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c
index b79d3bbd8350..8afdf5e0d312 100644
--- a/drivers/media/v4l2-core/v4l2-ctrls.c
+++ b/drivers/media/v4l2-core/v4l2-ctrls.c
@@ -828,6 +828,11 @@  const char *v4l2_ctrl_get_name(u32 id)
 	case V4L2_CID_MPEG_VIDEO_H264_CONSTRAINED_INTRA_PREDICTION:
 								return "H264 Constrained Intra Pred";
 	case V4L2_CID_MPEG_VIDEO_H264_CHROMA_QP_INDEX_OFFSET:	return "H264 Chroma QP Index Offset";
+	case V4L2_CID_MPEG_VIDEO_H264_SPS:			return "H264 Sequence Parameter Set";
+	case V4L2_CID_MPEG_VIDEO_H264_PPS:			return "H264 Picture Parameter Set";
+	case V4L2_CID_MPEG_VIDEO_H264_SCALING_MATRIX:		return "H264 Scaling Matrix";
+	case V4L2_CID_MPEG_VIDEO_H264_SLICE_PARAMS:		return "H264 Slice Parameters";
+	case V4L2_CID_MPEG_VIDEO_H264_DECODE_PARAMS:		return "H264 Decode Parameters";
 	case V4L2_CID_MPEG_VIDEO_MPEG4_I_FRAME_QP:		return "MPEG4 I-Frame QP Value";
 	case V4L2_CID_MPEG_VIDEO_MPEG4_P_FRAME_QP:		return "MPEG4 P-Frame QP Value";
 	case V4L2_CID_MPEG_VIDEO_MPEG4_B_FRAME_QP:		return "MPEG4 B-Frame QP Value";
@@ -1303,6 +1308,21 @@  void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
 	case V4L2_CID_MPEG_VIDEO_MPEG2_QUANTIZATION:
 		*type = V4L2_CTRL_TYPE_MPEG2_QUANTIZATION;
 		break;
+	case V4L2_CID_MPEG_VIDEO_H264_SPS:
+		*type = V4L2_CTRL_TYPE_H264_SPS;
+		break;
+	case V4L2_CID_MPEG_VIDEO_H264_PPS:
+		*type = V4L2_CTRL_TYPE_H264_PPS;
+		break;
+	case V4L2_CID_MPEG_VIDEO_H264_SCALING_MATRIX:
+		*type = V4L2_CTRL_TYPE_H264_SCALING_MATRIX;
+		break;
+	case V4L2_CID_MPEG_VIDEO_H264_SLICE_PARAMS:
+		*type = V4L2_CTRL_TYPE_H264_SLICE_PARAMS;
+		break;
+	case V4L2_CID_MPEG_VIDEO_H264_DECODE_PARAMS:
+		*type = V4L2_CTRL_TYPE_H264_DECODE_PARAMS;
+		break;
 	default:
 		*type = V4L2_CTRL_TYPE_INTEGER;
 		break;
@@ -1669,6 +1689,13 @@  static int std_validate(const struct v4l2_ctrl *ctrl, u32 idx,
 	case V4L2_CTRL_TYPE_MPEG2_QUANTIZATION:
 		return 0;
 
+	case V4L2_CTRL_TYPE_H264_SPS:
+	case V4L2_CTRL_TYPE_H264_PPS:
+	case V4L2_CTRL_TYPE_H264_SCALING_MATRIX:
+	case V4L2_CTRL_TYPE_H264_SLICE_PARAMS:
+	case V4L2_CTRL_TYPE_H264_DECODE_PARAMS:
+		return 0;
+
 	default:
 		return -EINVAL;
 	}
@@ -2249,6 +2276,21 @@  static struct v4l2_ctrl *v4l2_ctrl_new(struct v4l2_ctrl_handler *hdl,
 	case V4L2_CTRL_TYPE_MPEG2_QUANTIZATION:
 		elem_size = sizeof(struct v4l2_ctrl_mpeg2_quantization);
 		break;
+	case V4L2_CTRL_TYPE_H264_SPS:
+		elem_size = sizeof(struct v4l2_ctrl_h264_sps);
+		break;
+	case V4L2_CTRL_TYPE_H264_PPS:
+		elem_size = sizeof(struct v4l2_ctrl_h264_pps);
+		break;
+	case V4L2_CTRL_TYPE_H264_SCALING_MATRIX:
+		elem_size = sizeof(struct v4l2_ctrl_h264_scaling_matrix);
+		break;
+	case V4L2_CTRL_TYPE_H264_SLICE_PARAMS:
+		elem_size = sizeof(struct v4l2_ctrl_h264_slice_param);
+		break;
+	case V4L2_CTRL_TYPE_H264_DECODE_PARAMS:
+		elem_size = sizeof(struct v4l2_ctrl_h264_decode_param);
+		break;
 	default:
 		if (type < V4L2_CTRL_COMPOUND_TYPES)
 			elem_size = sizeof(s32);
diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c
index 6f707466b5d2..ee17d9169f04 100644
--- a/drivers/media/v4l2-core/v4l2-ioctl.c
+++ b/drivers/media/v4l2-core/v4l2-ioctl.c
@@ -1325,6 +1325,7 @@  static void v4l_fill_fmtdesc(struct v4l2_fmtdesc *fmt)
 		case V4L2_PIX_FMT_H264:		descr = "H.264"; break;
 		case V4L2_PIX_FMT_H264_NO_SC:	descr = "H.264 (No Start Codes)"; break;
 		case V4L2_PIX_FMT_H264_MVC:	descr = "H.264 MVC"; break;
+		case V4L2_PIX_FMT_H264_SLICE_RAW:	descr = "H.264 Parsed Slice Data"; break;
 		case V4L2_PIX_FMT_H263:		descr = "H.263"; break;
 		case V4L2_PIX_FMT_MPEG1:	descr = "MPEG-1 ES"; break;
 		case V4L2_PIX_FMT_MPEG2:	descr = "MPEG-2 ES"; break;
diff --git a/include/media/h264-ctrls.h b/include/media/h264-ctrls.h
new file mode 100644
index 000000000000..cf9663d9d470
--- /dev/null
+++ b/include/media/h264-ctrls.h
@@ -0,0 +1,190 @@ 
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * These are the H.264 state controls for use with stateless H.264
+ * codec drivers.
+ *
+ * It turns out that these structs are not stable yet and will undergo
+ * more changes. So keep them private until they are stable and ready to
+ * become part of the official public API.
+ */
+
+#ifndef _H264_CTRLS_H_
+#define _H264_CTRLS_H_
+
+/*
+ * This is put insanely high to avoid conflicting with controls that
+ * would be added during the phase where those controls are not
+ * stable. It should be fixed eventually.
+ */
+#define V4L2_CID_MPEG_VIDEO_H264_SPS		(V4L2_CID_MPEG_BASE+1000)
+#define V4L2_CID_MPEG_VIDEO_H264_PPS		(V4L2_CID_MPEG_BASE+1001)
+#define V4L2_CID_MPEG_VIDEO_H264_SCALING_MATRIX	(V4L2_CID_MPEG_BASE+1002)
+#define V4L2_CID_MPEG_VIDEO_H264_SLICE_PARAMS	(V4L2_CID_MPEG_BASE+1003)
+#define V4L2_CID_MPEG_VIDEO_H264_DECODE_PARAMS	(V4L2_CID_MPEG_BASE+1004)
+
+/* enum v4l2_ctrl_type type values */
+#define V4L2_CTRL_TYPE_H264_SPS 0x0105
+#define	V4L2_CTRL_TYPE_H264_PPS 0x0106
+#define	V4L2_CTRL_TYPE_H264_SCALING_MATRIX 0x0107
+#define	V4L2_CTRL_TYPE_H264_SLICE_PARAMS 0x0108
+#define	V4L2_CTRL_TYPE_H264_DECODE_PARAMS 0x0109
+
+#define V4L2_H264_SPS_CONSTRAINT_SET0_FLAG			0x01
+#define V4L2_H264_SPS_CONSTRAINT_SET1_FLAG			0x02
+#define V4L2_H264_SPS_CONSTRAINT_SET2_FLAG			0x04
+#define V4L2_H264_SPS_CONSTRAINT_SET3_FLAG			0x08
+#define V4L2_H264_SPS_CONSTRAINT_SET4_FLAG			0x10
+#define V4L2_H264_SPS_CONSTRAINT_SET5_FLAG			0x20
+
+#define V4L2_H264_SPS_FLAG_SEPARATE_COLOUR_PLANE		0x01
+#define V4L2_H264_SPS_FLAG_QPPRIME_Y_ZERO_TRANSFORM_BYPASS	0x02
+#define V4L2_H264_SPS_FLAG_DELTA_PIC_ORDER_ALWAYS_ZERO		0x04
+#define V4L2_H264_SPS_FLAG_GAPS_IN_FRAME_NUM_VALUE_ALLOWED	0x08
+#define V4L2_H264_SPS_FLAG_FRAME_MBS_ONLY			0x10
+#define V4L2_H264_SPS_FLAG_MB_ADAPTIVE_FRAME_FIELD		0x20
+#define V4L2_H264_SPS_FLAG_DIRECT_8X8_INFERENCE			0x40
+
+struct v4l2_ctrl_h264_sps {
+	__u8 profile_idc;
+	__u8 constraint_set_flags;
+	__u8 level_idc;
+	__u8 seq_parameter_set_id;
+	__u8 chroma_format_idc;
+	__u8 bit_depth_luma_minus8;
+	__u8 bit_depth_chroma_minus8;
+	__u8 log2_max_frame_num_minus4;
+	__u8 pic_order_cnt_type;
+	__u8 log2_max_pic_order_cnt_lsb_minus4;
+	__u8 max_num_ref_frames;
+	__u8 num_ref_frames_in_pic_order_cnt_cycle;
+	__s32 offset_for_ref_frame[255];
+	__s32 offset_for_non_ref_pic;
+	__s32 offset_for_top_to_bottom_field;
+	__u16 pic_width_in_mbs_minus1;
+	__u16 pic_height_in_map_units_minus1;
+	__u32 flags;
+};
+
+#define V4L2_H264_PPS_FLAG_ENTROPY_CODING_MODE				0x0001
+#define V4L2_H264_PPS_FLAG_BOTTOM_FIELD_PIC_ORDER_IN_FRAME_PRESENT	0x0002
+#define V4L2_H264_PPS_FLAG_WEIGHTED_PRED				0x0004
+#define V4L2_H264_PPS_FLAG_DEBLOCKING_FILTER_CONTROL_PRESENT		0x0008
+#define V4L2_H264_PPS_FLAG_CONSTRAINED_INTRA_PRED			0x0010
+#define V4L2_H264_PPS_FLAG_REDUNDANT_PIC_CNT_PRESENT			0x0020
+#define V4L2_H264_PPS_FLAG_TRANSFORM_8X8_MODE				0x0040
+#define V4L2_H264_PPS_FLAG_PIC_SCALING_MATRIX_PRESENT			0x0080
+
+struct v4l2_ctrl_h264_pps {
+	__u8 pic_parameter_set_id;
+	__u8 seq_parameter_set_id;
+	__u8 num_slice_groups_minus1;
+	__u8 num_ref_idx_l0_default_active_minus1;
+	__u8 num_ref_idx_l1_default_active_minus1;
+	__u8 weighted_bipred_idc;
+	__s8 pic_init_qp_minus26;
+	__s8 pic_init_qs_minus26;
+	__s8 chroma_qp_index_offset;
+	__s8 second_chroma_qp_index_offset;
+	__u16 flags;
+};
+
+struct v4l2_ctrl_h264_scaling_matrix {
+	__u8 scaling_list_4x4[6][16];
+	__u8 scaling_list_8x8[6][64];
+};
+
+struct v4l2_h264_weight_factors {
+	__s16 luma_weight[32];
+	__s16 luma_offset[32];
+	__s16 chroma_weight[32][2];
+	__s16 chroma_offset[32][2];
+};
+
+struct v4l2_h264_pred_weight_table {
+	__u16 luma_log2_weight_denom;
+	__u16 chroma_log2_weight_denom;
+	struct v4l2_h264_weight_factors weight_factors[2];
+};
+
+#define V4L2_H264_SLICE_TYPE_P				0
+#define V4L2_H264_SLICE_TYPE_B				1
+#define V4L2_H264_SLICE_TYPE_I				2
+#define V4L2_H264_SLICE_TYPE_SP				3
+#define V4L2_H264_SLICE_TYPE_SI				4
+
+#define V4L2_H264_SLICE_FLAG_FIELD_PIC			0x01
+#define V4L2_H264_SLICE_FLAG_BOTTOM_FIELD		0x02
+#define V4L2_H264_SLICE_FLAG_DIRECT_SPATIAL_MV_PRED	0x04
+#define V4L2_H264_SLICE_FLAG_SP_FOR_SWITCH		0x08
+
+struct v4l2_ctrl_h264_slice_param {
+	/* Size in bytes, including header */
+	__u32 size;
+	/* Offset in bits to slice_data() from the beginning of this slice. */
+	__u32 header_bit_size;
+
+	__u16 first_mb_in_slice;
+	__u8 slice_type;
+	__u8 pic_parameter_set_id;
+	__u8 colour_plane_id;
+	__u8 redundant_pic_cnt;
+	__u16 frame_num;
+	__u16 idr_pic_id;
+	__u16 pic_order_cnt_lsb;
+	__s32 delta_pic_order_cnt_bottom;
+	__s32 delta_pic_order_cnt0;
+	__s32 delta_pic_order_cnt1;
+
+	struct v4l2_h264_pred_weight_table pred_weight_table;
+	/* Size in bits of dec_ref_pic_marking() syntax element. */
+	__u32 dec_ref_pic_marking_bit_size;
+	/* Size in bits of pic order count syntax. */
+	__u32 pic_order_cnt_bit_size;
+
+	__u8 cabac_init_idc;
+	__s8 slice_qp_delta;
+	__s8 slice_qs_delta;
+	__u8 disable_deblocking_filter_idc;
+	__s8 slice_alpha_c0_offset_div2;
+	__s8 slice_beta_offset_div2;
+	__u8 num_ref_idx_l0_active_minus1;
+	__u8 num_ref_idx_l1_active_minus1;
+	__u32 slice_group_change_cycle;
+
+	/*
+	 * Entries on each list are indices into
+	 * v4l2_ctrl_h264_decode_param.dpb[].
+	 */
+	__u8 ref_pic_list0[32];
+	__u8 ref_pic_list1[32];
+
+	__u32 flags;
+};
+
+#define V4L2_H264_DPB_ENTRY_FLAG_VALID		0x01
+#define V4L2_H264_DPB_ENTRY_FLAG_ACTIVE		0x02
+#define V4L2_H264_DPB_ENTRY_FLAG_LONG_TERM	0x04
+
+struct v4l2_h264_dpb_entry {
+	__u64 timestamp;
+	__u16 frame_num;
+	__u16 pic_num;
+	/* Note that field is indicated by v4l2_buffer.field */
+	__s32 top_field_order_cnt;
+	__s32 bottom_field_order_cnt;
+	__u32 flags; /* V4L2_H264_DPB_ENTRY_FLAG_* */
+};
+
+struct v4l2_ctrl_h264_decode_param {
+	__u32 num_slices;
+	__u16 idr_pic_flag;
+	__u16 nal_ref_idc;
+	__u8 ref_pic_list_p0[32];
+	__u8 ref_pic_list_b0[32];
+	__u8 ref_pic_list_b1[32];
+	__s32 top_field_order_cnt;
+	__s32 bottom_field_order_cnt;
+	struct v4l2_h264_dpb_entry dpb[16];
+};
+
+#endif
diff --git a/include/media/v4l2-ctrls.h b/include/media/v4l2-ctrls.h
index d63cf227b0ab..22b6d09c4764 100644
--- a/include/media/v4l2-ctrls.h
+++ b/include/media/v4l2-ctrls.h
@@ -23,10 +23,11 @@ 
 #include <media/media-request.h>
 
 /*
- * Include the mpeg2 stateless codec compound control definitions.
+ * Include the stateless codec compound control definitions.
  * This will move to the public headers once this API is fully stable.
  */
 #include <media/mpeg2-ctrls.h>
+#include <media/h264-ctrls.h>
 
 /* forward references */
 struct file;
@@ -49,6 +50,11 @@  struct poll_table_struct;
  * @p_char:			Pointer to a string.
  * @p_mpeg2_slice_params:	Pointer to a MPEG2 slice parameters structure.
  * @p_mpeg2_quantization:	Pointer to a MPEG2 quantization data structure.
+ * @p_h264_sps:			Pointer to a struct v4l2_ctrl_h264_sps.
+ * @p_h264_pps:			Pointer to a struct v4l2_ctrl_h264_pps.
+ * @p_h264_scaling_matrix:	Pointer to a struct v4l2_ctrl_h264_scaling_matrix.
+ * @p_h264_slice_param:		Pointer to a struct v4l2_ctrl_h264_slice_param.
+ * @p_h264_decode_param:	Pointer to a struct v4l2_ctrl_h264_decode_param.
  * @p:				Pointer to a compound value.
  */
 union v4l2_ctrl_ptr {
@@ -60,6 +66,11 @@  union v4l2_ctrl_ptr {
 	char *p_char;
 	struct v4l2_ctrl_mpeg2_slice_params *p_mpeg2_slice_params;
 	struct v4l2_ctrl_mpeg2_quantization *p_mpeg2_quantization;
+	struct v4l2_ctrl_h264_sps *p_h264_sps;
+	struct v4l2_ctrl_h264_pps *p_h264_pps;
+	struct v4l2_ctrl_h264_scaling_matrix *p_h264_scaling_matrix;
+	struct v4l2_ctrl_h264_slice_param *p_h264_slice_param;
+	struct v4l2_ctrl_h264_decode_param *p_h264_decode_param;
 	void *p;
 };
 
diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h
index 1db220da3bcc..dd5da9802d2c 100644
--- a/include/uapi/linux/videodev2.h
+++ b/include/uapi/linux/videodev2.h
@@ -657,6 +657,7 @@  struct v4l2_pix_format {
 #define V4L2_PIX_FMT_H264     v4l2_fourcc('H', '2', '6', '4') /* H264 with start codes */
 #define V4L2_PIX_FMT_H264_NO_SC v4l2_fourcc('A', 'V', 'C', '1') /* H264 without start codes */
 #define V4L2_PIX_FMT_H264_MVC v4l2_fourcc('M', '2', '6', '4') /* H264 MVC */
+#define V4L2_PIX_FMT_H264_SLICE_RAW v4l2_fourcc('S', '2', '6', '4') /* H264 parsed slices */
 #define V4L2_PIX_FMT_H263     v4l2_fourcc('H', '2', '6', '3') /* H263          */
 #define V4L2_PIX_FMT_MPEG1    v4l2_fourcc('M', 'P', 'G', '1') /* MPEG-1 ES     */
 #define V4L2_PIX_FMT_MPEG2    v4l2_fourcc('M', 'P', 'G', '2') /* MPEG-2 ES     */