diff mbox series

[v10,09/10] gpio: uniphier: Utilize for_each_set_clump8 macro

Message ID 9487b6bd8f9c2242448729f5f8fc9534f724b221.1552566114.git.vilhelm.gray@gmail.com (mailing list archive)
State New, archived
Headers show
Series Introduce the for_each_set_clump8 macro | expand

Commit Message

William Breathitt Gray March 14, 2019, 12:32 p.m. UTC
Replace verbose implementation in set_multiple callback with
for_each_set_clump8 macro to simplify code and improve clarity. An
improvement in this case is that banks that are not masked will now be
skipped.

Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
---
 drivers/gpio/gpio-uniphier.c | 16 ++++++----------
 1 file changed, 6 insertions(+), 10 deletions(-)

Comments

William Breathitt Gray March 14, 2019, 12:53 p.m. UTC | #1
On Thu, Mar 14, 2019 at 09:32:37PM +0900, William Breathitt Gray wrote:
> Replace verbose implementation in set_multiple callback with
> for_each_set_clump8 macro to simplify code and improve clarity. An
> improvement in this case is that banks that are not masked will now be
> skipped.
> 
> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
> ---
>  drivers/gpio/gpio-uniphier.c | 16 ++++++----------
>  1 file changed, 6 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/gpio/gpio-uniphier.c b/drivers/gpio/gpio-uniphier.c
> index 0f662b297a95..df640cb29b9c 100644
> --- a/drivers/gpio/gpio-uniphier.c
> +++ b/drivers/gpio/gpio-uniphier.c
> @@ -15,9 +15,6 @@
>  #include <linux/spinlock.h>
>  #include <dt-bindings/gpio/uniphier-gpio.h>
>  
> -#define UNIPHIER_GPIO_BANK_MASK		\
> -				GENMASK((UNIPHIER_GPIO_LINES_PER_BANK) - 1, 0)
> -
>  #define UNIPHIER_GPIO_IRQ_MAX_NUM	24
>  
>  #define UNIPHIER_GPIO_PORT_DATA		0x0	/* data */
> @@ -147,15 +144,14 @@ static void uniphier_gpio_set(struct gpio_chip *chip,
>  static void uniphier_gpio_set_multiple(struct gpio_chip *chip,
>  				       unsigned long *mask, unsigned long *bits)
>  {
> -	unsigned int bank, shift, bank_mask, bank_bits;
> -	int i;
> +	unsigned int i;
> +	unsigned long bank_mask;
> +	unsigned int bank;
> +	unsigned int bank_bits;
>  
> -	for (i = 0; i < chip->ngpio; i += UNIPHIER_GPIO_LINES_PER_BANK) {
> +	for_each_set_clump8(i, bank_mask, mask, chip->ngpio) {
>  		bank = i / UNIPHIER_GPIO_LINES_PER_BANK;
> -		shift = i % BITS_PER_LONG;
> -		bank_mask = (mask[BIT_WORD(i)] >> shift) &
> -						UNIPHIER_GPIO_BANK_MASK;
> -		bank_bits = bits[BIT_WORD(i)] >> shift;
> +		bank_bits = bitmap_get_value8(bits, chip->ngpio, i);
>  
>  		uniphier_gpio_bank_write(chip, bank, UNIPHIER_GPIO_PORT_DATA,
>  					 bank_mask, bank_bits);
> -- 
> 2.21.0

Masahiro,

I noticed this loops per GPIO bank and uniphier_gpio_bank_write is
called each time to update the respective bank. The
uniphier_gpio_reg_update function however is calling writel to update
the registers; yet only 8 bits (UNIPHIER_GPIO_LINES_PER_BANK) are
updated at a time via the uniphier_gpio_bank_write call in the
uniphier_gpio_set_multiple function.

Can more than one bank be updated at a time via writel (e.g. 4 banks at
8 bits per bank via a single 32-bit writel call)? If so, instead of
using the for_each_set_clump8 macro, it may be more efficient to loop
through 4 banks at a time.

William Breathitt Gray
diff mbox series

Patch

diff --git a/drivers/gpio/gpio-uniphier.c b/drivers/gpio/gpio-uniphier.c
index 0f662b297a95..df640cb29b9c 100644
--- a/drivers/gpio/gpio-uniphier.c
+++ b/drivers/gpio/gpio-uniphier.c
@@ -15,9 +15,6 @@ 
 #include <linux/spinlock.h>
 #include <dt-bindings/gpio/uniphier-gpio.h>
 
-#define UNIPHIER_GPIO_BANK_MASK		\
-				GENMASK((UNIPHIER_GPIO_LINES_PER_BANK) - 1, 0)
-
 #define UNIPHIER_GPIO_IRQ_MAX_NUM	24
 
 #define UNIPHIER_GPIO_PORT_DATA		0x0	/* data */
@@ -147,15 +144,14 @@  static void uniphier_gpio_set(struct gpio_chip *chip,
 static void uniphier_gpio_set_multiple(struct gpio_chip *chip,
 				       unsigned long *mask, unsigned long *bits)
 {
-	unsigned int bank, shift, bank_mask, bank_bits;
-	int i;
+	unsigned int i;
+	unsigned long bank_mask;
+	unsigned int bank;
+	unsigned int bank_bits;
 
-	for (i = 0; i < chip->ngpio; i += UNIPHIER_GPIO_LINES_PER_BANK) {
+	for_each_set_clump8(i, bank_mask, mask, chip->ngpio) {
 		bank = i / UNIPHIER_GPIO_LINES_PER_BANK;
-		shift = i % BITS_PER_LONG;
-		bank_mask = (mask[BIT_WORD(i)] >> shift) &
-						UNIPHIER_GPIO_BANK_MASK;
-		bank_bits = bits[BIT_WORD(i)] >> shift;
+		bank_bits = bitmap_get_value8(bits, chip->ngpio, i);
 
 		uniphier_gpio_bank_write(chip, bank, UNIPHIER_GPIO_PORT_DATA,
 					 bank_mask, bank_bits);