diff mbox series

[2/2] edac: sifive: Add EDAC driver for SiFive FU540-C000 chip

Message ID 1553082728-9232-3-git-send-email-yash.shah@sifive.com (mailing list archive)
State New, archived
Headers show
Series EDAC Support for SiFive SoCs | expand

Commit Message

Yash Shah March 20, 2019, 11:52 a.m. UTC 
This EDAC driver supports:
- Initial configuration reporting on bootup via debug logs
- ECC event monitoring and reporting through the EDAC framework
- ECC event injection

This driver is partially based on pnd2_edac.c and altera_edac.c

Initially L2 Cache controller is added as a subcomponent to
this EDAC driver.

Signed-off-by: Yash Shah <yash.shah@sifive.com>
---
 arch/riscv/Kconfig         |   1 +
 drivers/edac/Kconfig       |  13 ++
 drivers/edac/Makefile      |   1 +
 drivers/edac/sifive_edac.c | 297 +++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 312 insertions(+)
 create mode 100644 drivers/edac/sifive_edac.c

Comments

Borislav Petkov March 21, 2019, 1:33 p.m. UTC | #1 
On Wed, Mar 20, 2019 at 05:22:08PM +0530, Yash Shah wrote:
> This EDAC driver supports:
> - Initial configuration reporting on bootup via debug logs
> - ECC event monitoring and reporting through the EDAC framework
> - ECC event injection
> 
> This driver is partially based on pnd2_edac.c and altera_edac.c
> 
> Initially L2 Cache controller is added as a subcomponent to
> this EDAC driver.
> 
> Signed-off-by: Yash Shah <yash.shah@sifive.com>

...

> diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
> index e286b5b..112d9d1 100644
> --- a/drivers/edac/Kconfig
> +++ b/drivers/edac/Kconfig
> @@ -440,6 +440,19 @@ config EDAC_ALTERA_SDMMC
>  	  Support for error detection and correction on the
>  	  Altera SDMMC FIFO Memory for Altera SoCs.
>  
> +config EDAC_SIFIVE
> +	tristate "Sifive ECC"
> +	depends on RISCV
> +	help
> +	  Support for error detection and correction on the SiFive SoCs.
> +
> +config EDAC_SIFIVE_L2

That config item is unused. Drop it.

> +	bool "SiFive L2 Cache ECC"
> +	depends on EDAC_SIFIVE=y
> +	help
> +	  Support for error detection and correction of the L2 cache
> +	  memory on SiFive SoCs.
> +
>  config EDAC_SYNOPSYS
>  	tristate "Synopsys DDR Memory Controller"
>  	depends on ARCH_ZYNQ || ARCH_ZYNQMP

...

> +/*
> + * sifive_edac_l2_int_handler - ISR function for l2 cache controller
> + * @irq:	Irq Number
> + * @device:	Pointer to the edac device controller instance
> + *
> + * This routine is triggered whenever there is ECC error detected
> + *
> + * Return: Always returns IRQ_HANDLED
> + */
> +static irqreturn_t sifive_edac_l2_int_handler(int irq, void *device)
> +{
> +	struct edac_device_ctl_info *dci =
> +					(struct edac_device_ctl_info *)device;

No ugly linebreaks like that - just let it stick out even if it is > 80
cols long.

> +	struct sifive_edac_device_dev *drvdata = dci->pvt_info;
> +	u32 regval, add_h, add_l;
> +
> +	if (irq == drvdata->irq[dir_corr]) {
> +		add_h = readl(drvdata->base + SIFIVE_EDAC_DIRFIX_HIGH);
> +		add_l = readl(drvdata->base + SIFIVE_EDAC_DIRFIX_LOW);
> +		dev_err(dci->dev,
> +			"DirError at address 0x%08X.%08X\n", add_h, add_l);

Same here and below.

> +		regval = readl(drvdata->base + SIFIVE_EDAC_DIRFIX_COUNT);
> +		edac_device_handle_ce(dci, 0, 0, "DirECCFix");
> +	}
> +	if (irq == drvdata->irq[data_corr]) {
> +		add_h = readl(drvdata->base + SIFIVE_EDAC_DATFIX_HIGH);
> +		add_l = readl(drvdata->base + SIFIVE_EDAC_DATFIX_LOW);
> +		dev_err(dci->dev,
> +			"DataError at address 0x%08X.%08X\n", add_h, add_l);
> +		regval = readl(drvdata->base + SIFIVE_EDAC_DATFIX_COUNT);
> +		edac_device_handle_ce(dci, 0, 0, "DatECCFix");
> +	}
> +	if (irq == drvdata->irq[data_uncorr]) {
> +		add_h = readl(drvdata->base + SIFIVE_EDAC_DATFAIL_HIGH);
> +		add_l = readl(drvdata->base + SIFIVE_EDAC_DATFAIL_LOW);
> +		dev_err(dci->dev,
> +			"DataFail at address 0x%08X.%08X\n", add_h, add_l);
> +		regval = readl(drvdata->base + SIFIVE_EDAC_DATFAIL_COUNT);
> +		edac_device_handle_ue(dci, 0, 0, "DatECCFail");
> +	}
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static void sifive_edac_l2_config_read(struct edac_device_ctl_info *dci)
> +{
> +	struct sifive_edac_device_dev *drvdata = dci->pvt_info;
> +	u32 regval, val;
> +
> +	regval = readl(drvdata->base + SIFIVE_EDAC_CONFIG);
> +	val = regval & 0xFF;
> +	dev_info(dci->dev, "No. of Banks in the cache: %d\n", val);
> +	val = (regval & 0xFF00) >> 8;
> +	dev_info(dci->dev, "No. of ways per bank: %d\n", val);
> +	val = (regval & 0xFF0000) >> 16;
> +	dev_info(dci->dev, "Sets per bank: %llu\n", (uint64_t)1 << val);
> +	val = (regval & 0xFF000000) >> 24;
> +	dev_info(dci->dev,
> +		 "Bytes per cache block: %llu\n", (uint64_t)1 << val);
> +}
> +
> +static const struct sifive_edac_device_prv l2ecc_data = {
> +	.setup = sifive_edac_l2_config_read,
> +	.inject_fops = &sifive_edac_l2_fops,
> +	.ecc_irq_handler = sifive_edac_l2_int_handler,
> +};
> +
> +/*
> + * sifive_edac_device_probe()
> + *	This is a generic EDAC device driver that will support
> + *	various SiFive memory devices as well as the memories
> + *	for other peripherals. Module specific initialization is
> + *	done by passing the function index in the device tree.

This comment doesn't have anything to do with that function but rather
belongs at the top of this file.

> + */
> +static int sifive_edac_device_probe(struct platform_device *pdev)
> +{
> +	struct edac_device_ctl_info *dci;
> +	struct sifive_edac_device_dev *drvdata;
> +	int rc, i;
> +	struct resource *res;
> +	void __iomem *baseaddr;
> +	struct device_node *np = pdev->dev.of_node;
> +	char *ecc_name = (char *)np->name;
> +	static int dev_instance;

Please sort function local variables declaration in a reverse christmas
tree order:

	<type_a> longest_variable_name;
	<type_b> shorter_var_name;
	<type_c> even_shorter;
	<type_d> i;

> +
> +	/* Get the data from the platform device */
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	baseaddr = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(baseaddr))
> +		return PTR_ERR(baseaddr);
> +
> +	dci = edac_device_alloc_ctl_info(sizeof(*drvdata), ecc_name,
> +					 1, ecc_name, 1, 1, NULL, 0,
> +					 dev_instance++);
> +	if (IS_ERR(dci))
> +		return PTR_ERR(dci);
> +
> +	drvdata = dci->pvt_info;
> +	drvdata->base = baseaddr;
> +	drvdata->edac_dev_name = ecc_name;
> +	dci->dev = &pdev->dev;
> +	dci->mod_name = "Sifive ECC Manager";
> +	dci->ctl_name = dev_name(&pdev->dev);
> +	dci->dev_name = dev_name(&pdev->dev);
> +
> +	 /* Get driver specific data for this EDAC device */
> +	drvdata->data = of_match_node(sifive_edac_device_of_match, np)->data;
> +
> +	setup_sifive_debug(dci, drvdata->data);
> +
> +	if (drvdata->data->setup)
> +		drvdata->data->setup(dci);
> +
> +	for (i = 0; i < SIFIVE_EDAC_MAX_INTR; i++) {
> +		drvdata->irq[i] = platform_get_irq(pdev, i);
> +		rc = devm_request_irq(&pdev->dev, drvdata->irq[i],
> +				      sifive_edac_l2_int_handler, 0,
> +				      dev_name(&pdev->dev), (void *)dci);
> +		if (rc) {
> +			dev_err(&pdev->dev,
> +				"Could not request IRQ %d\n", drvdata->irq[i]);
> +			goto del_edac_device;
> +		}
> +	}
> +
> +	rc = edac_device_add_device(dci);
> +	if (rc) {
> +		dev_err(&pdev->dev, "failed to register with EDAC core\n");
> +		goto del_edac_device;
> +	}

Call setup_sifive_debug() in the success case here so that you don't
have to teardown below.

> +
> +	return rc;
> +
> +del_edac_device:
> +	teardown_sifive_debug();
> +	edac_device_del_device(&pdev->dev);
> +	edac_device_free_ctl_info(dci);

Those three can be replaced by a call to sifive_edac_device_remove() ?

Btw, you have prefixed your static functions with "sifive_edac_" which
doesn't make much sense and you have long names for no good reason.

> +
> +	return rc;
> +}
> +
> +static int sifive_edac_device_remove(struct platform_device *pdev)
> +{
> +	struct edac_device_ctl_info *dci = platform_get_drvdata(pdev);
> +
> +	teardown_sifive_debug();
> +	edac_device_del_device(&pdev->dev);
> +	edac_device_free_ctl_info(dci);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id sifive_edac_device_of_match[] = {
> +	{ .compatible = "sifive,ccache0", .data = &l2ecc_data },
> +	{ /* end of table */ },
> +};
> +MODULE_DEVICE_TABLE(of, sifive_edac_device_of_match);
> +
> +static struct platform_driver sifive_edac_device_driver = {
> +	.driver = {
> +		 .name = "sifive_edac_device",

"device"? I think it is clear that it is a device and thus kinda
tautological. "sifive_edac" should be enough...

Last but not least, building this driver with the riscv64 cross compilers from
here:

http://cdn.kernel.org/pub/tools/crosstool/files/bin/

fails like below. With the riscv32 compiler it fails the same.

Provided I'm not doing anything wrong, you should not be sending me
half-baked stuff which doesn't even build.

drivers/edac/sifive_edac.c: In function 'sifive_edac_device_probe':
drivers/edac/sifive_edac.c:231:16: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
  drvdata->data = of_match_node(sifive_edac_device_of_match, np)->data;
                ^
In file included from drivers/edac/sifive_edac.c:10:
drivers/edac/sifive_edac.c: At top level:
./include/linux/module.h:130:42: error: redefinition of '__inittest'
  static inline initcall_t __maybe_unused __inittest(void)  \
                                          ^~~~~~~~~~
./include/linux/device.h:1647:1: note: in expansion of macro 'module_init'
 module_init(__driver##_init); \
 ^~~~~~~~~~~
./include/linux/platform_device.h:233:2: note: in expansion of macro 'module_driver'
  module_driver(__platform_driver, platform_driver_register, \
  ^~~~~~~~~~~~~
drivers/edac/sifive_edac.c:293:1: note: in expansion of macro 'module_platform_driver'
 module_platform_driver(sifive_edac_device_driver);
 ^~~~~~~~~~~~~~~~~~~~~~
./include/linux/module.h:130:42: note: previous definition of '__inittest' was here
  static inline initcall_t __maybe_unused __inittest(void)  \
                                          ^~~~~~~~~~
./include/linux/device.h:1647:1: note: in expansion of macro 'module_init'
 module_init(__driver##_init); \
 ^~~~~~~~~~~
./include/linux/platform_device.h:233:2: note: in expansion of macro 'module_driver'
  module_driver(__platform_driver, platform_driver_register, \
  ^~~~~~~~~~~~~
drivers/edac/sifive_edac.c:57:1: note: in expansion of macro 'module_platform_driver'
 module_platform_driver(sifive_edac_driver);
 ^~~~~~~~~~~~~~~~~~~~~~
./include/linux/module.h:132:6: error: redefinition of 'init_module'
  int init_module(void) __copy(initfn) __attribute__((alias(#initfn)));
      ^~~~~~~~~~~
./include/linux/device.h:1647:1: note: in expansion of macro 'module_init'
 module_init(__driver##_init); \
 ^~~~~~~~~~~
./include/linux/platform_device.h:233:2: note: in expansion of macro 'module_driver'
  module_driver(__platform_driver, platform_driver_register, \
  ^~~~~~~~~~~~~
drivers/edac/sifive_edac.c:293:1: note: in expansion of macro 'module_platform_driver'
 module_platform_driver(sifive_edac_device_driver);
 ^~~~~~~~~~~~~~~~~~~~~~
./include/linux/module.h:132:6: note: previous definition of 'init_module' was here
  int init_module(void) __copy(initfn) __attribute__((alias(#initfn)));
      ^~~~~~~~~~~
./include/linux/device.h:1647:1: note: in expansion of macro 'module_init'
 module_init(__driver##_init); \
 ^~~~~~~~~~~
./include/linux/platform_device.h:233:2: note: in expansion of macro 'module_driver'
  module_driver(__platform_driver, platform_driver_register, \
  ^~~~~~~~~~~~~
drivers/edac/sifive_edac.c:57:1: note: in expansion of macro 'module_platform_driver'
 module_platform_driver(sifive_edac_driver);
 ^~~~~~~~~~~~~~~~~~~~~~
./include/linux/module.h:136:42: error: redefinition of '__exittest'
  static inline exitcall_t __maybe_unused __exittest(void)  \
                                          ^~~~~~~~~~
./include/linux/device.h:1652:1: note: in expansion of macro 'module_exit'
 module_exit(__driver##_exit);
 ^~~~~~~~~~~
./include/linux/platform_device.h:233:2: note: in expansion of macro 'module_driver'
  module_driver(__platform_driver, platform_driver_register, \
  ^~~~~~~~~~~~~
drivers/edac/sifive_edac.c:293:1: note: in expansion of macro 'module_platform_driver'
 module_platform_driver(sifive_edac_device_driver);
 ^~~~~~~~~~~~~~~~~~~~~~
./include/linux/module.h:136:42: note: previous definition of '__exittest' was here
  static inline exitcall_t __maybe_unused __exittest(void)  \
                                          ^~~~~~~~~~
./include/linux/device.h:1652:1: note: in expansion of macro 'module_exit'
 module_exit(__driver##_exit);
 ^~~~~~~~~~~
./include/linux/platform_device.h:233:2: note: in expansion of macro 'module_driver'
  module_driver(__platform_driver, platform_driver_register, \
  ^~~~~~~~~~~~~
drivers/edac/sifive_edac.c:57:1: note: in expansion of macro 'module_platform_driver'
 module_platform_driver(sifive_edac_driver);
 ^~~~~~~~~~~~~~~~~~~~~~
./include/linux/module.h:138:7: error: redefinition of 'cleanup_module'
  void cleanup_module(void) __copy(exitfn) __attribute__((alias(#exitfn)));
       ^~~~~~~~~~~~~~
./include/linux/device.h:1652:1: note: in expansion of macro 'module_exit'
 module_exit(__driver##_exit);
 ^~~~~~~~~~~
./include/linux/platform_device.h:233:2: note: in expansion of macro 'module_driver'
  module_driver(__platform_driver, platform_driver_register, \
  ^~~~~~~~~~~~~
drivers/edac/sifive_edac.c:293:1: note: in expansion of macro 'module_platform_driver'
 module_platform_driver(sifive_edac_device_driver);
 ^~~~~~~~~~~~~~~~~~~~~~
./include/linux/module.h:138:7: note: previous definition of 'cleanup_module' was here
  void cleanup_module(void) __copy(exitfn) __attribute__((alias(#exitfn)));
       ^~~~~~~~~~~~~~
./include/linux/device.h:1652:1: note: in expansion of macro 'module_exit'
 module_exit(__driver##_exit);
 ^~~~~~~~~~~
./include/linux/platform_device.h:233:2: note: in expansion of macro 'module_driver'
  module_driver(__platform_driver, platform_driver_register, \
  ^~~~~~~~~~~~~
drivers/edac/sifive_edac.c:57:1: note: in expansion of macro 'module_platform_driver'
 module_platform_driver(sifive_edac_driver);
 ^~~~~~~~~~~~~~~~~~~~~~
make[3]: *** [scripts/Makefile.build:285: drivers/edac/sifive_edac.o] Error 1
make[2]: *** [scripts/Makefile.build:489: drivers/edac] Error 2
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [/home/boris/kernel/linux-2.6/Makefile:1046: drivers] Error 2
make: *** [Makefile:170: sub-make] Error 2
Yash Shah March 22, 2019, 6 a.m. UTC | #2 
On Thu, Mar 21, 2019 at 7:03 PM Borislav Petkov <bp@alien8.de> wrote:
>
> On Wed, Mar 20, 2019 at 05:22:08PM +0530, Yash Shah wrote:
> > This EDAC driver supports:
> > - Initial configuration reporting on bootup via debug logs
> > - ECC event monitoring and reporting through the EDAC framework
> > - ECC event injection
> >
> > This driver is partially based on pnd2_edac.c and altera_edac.c
> >
> > Initially L2 Cache controller is added as a subcomponent to
> > this EDAC driver.
> >
> > Signed-off-by: Yash Shah <yash.shah@sifive.com>
>
> ...
>
> > diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
> > index e286b5b..112d9d1 100644
> > --- a/drivers/edac/Kconfig
> > +++ b/drivers/edac/Kconfig
> > @@ -440,6 +440,19 @@ config EDAC_ALTERA_SDMMC
> >         Support for error detection and correction on the
> >         Altera SDMMC FIFO Memory for Altera SoCs.
> >
> > +config EDAC_SIFIVE
> > +     tristate "Sifive ECC"
> > +     depends on RISCV
> > +     help
> > +       Support for error detection and correction on the SiFive SoCs.
> > +
> > +config EDAC_SIFIVE_L2
>
> That config item is unused. Drop it.

Sure, will drop it.

> > +static irqreturn_t sifive_edac_l2_int_handler(int irq, void *device)
> > +{
> > +     struct edac_device_ctl_info *dci =
> > +                                     (struct edac_device_ctl_info *)device;
>
> No ugly linebreaks like that - just let it stick out even if it is > 80
> cols long.

Ok. Will let it stick out.

> > +
> > +/*
> > + * sifive_edac_device_probe()
> > + *   This is a generic EDAC device driver that will support
> > + *   various SiFive memory devices as well as the memories
> > + *   for other peripherals. Module specific initialization is
> > + *   done by passing the function index in the device tree.
>
> This comment doesn't have anything to do with that function but rather
> belongs at the top of this file.

Will move it at the top.

>
> > + */
> > +static int sifive_edac_device_probe(struct platform_device *pdev)
> > +{
> > +     struct edac_device_ctl_info *dci;
> > +     struct sifive_edac_device_dev *drvdata;
> > +     int rc, i;
> > +     struct resource *res;
> > +     void __iomem *baseaddr;
> > +     struct device_node *np = pdev->dev.of_node;
> > +     char *ecc_name = (char *)np->name;
> > +     static int dev_instance;
>
> Please sort function local variables declaration in a reverse christmas
> tree order:
>
>         <type_a> longest_variable_name;
>         <type_b> shorter_var_name;
>         <type_c> even_shorter;
>         <type_d> i;
>

Sure, will be done.

> > +
> > +     rc = edac_device_add_device(dci);
> > +     if (rc) {
> > +             dev_err(&pdev->dev, "failed to register with EDAC core\n");
> > +             goto del_edac_device;
> > +     }
>
> Call setup_sifive_debug() in the success case here so that you don't
> have to teardown below.

Ok.

>
> > +
> > +     return rc;
> > +
> > +del_edac_device:
> > +     teardown_sifive_debug();
> > +     edac_device_del_device(&pdev->dev);
> > +     edac_device_free_ctl_info(dci);
>
> Those three can be replaced by a call to sifive_edac_device_remove() ?

Since now there won't be a need to teardown, I will stick with this
(bottom two function calls).

>
> Btw, you have prefixed your static functions with "sifive_edac_" which
> doesn't make much sense and you have long names for no good reason.

Will remove the prefix "sifive_edac_" on static functions wherever feasible.

> > +static struct platform_driver sifive_edac_device_driver = {
> > +     .driver = {
> > +              .name = "sifive_edac_device",
>
> "device"? I think it is clear that it is a device and thus kinda
> tautological. "sifive_edac" should be enough...

Sure. Will keep it just "sifive_edac"

>
> Last but not least, building this driver with the riscv64 cross compilers from
> here:
>
> http://cdn.kernel.org/pub/tools/crosstool/files/bin/
>
> fails like below. With the riscv32 compiler it fails the same.
>
> Provided I'm not doing anything wrong, you should not be sending me
> half-baked stuff which doesn't even build.

Sorry about that. It fails if configured as 'module'.
I intended this driver to be built-in only hence I never came across
these errors while testing.
I somehow missed it in Kconfig file.
I will make the correction in Kconfig (change 'tristate' to 'bool')
and make sure everything builds fine.

> --
> Regards/Gruss,
>     Boris.

Thanks for your comments.

- Yash

>
> ECO tip #101: Trim your mails when you reply.
> --
Paul Walmsley March 25, 2019, 12:23 a.m. UTC | #3 
Hi Yash,

Just a few brief comments here:

On Wed, 20 Mar 2019, Yash Shah wrote:

> This EDAC driver supports:
> - Initial configuration reporting on bootup via debug logs
> - ECC event monitoring and reporting through the EDAC framework
> - ECC event injection
> 

It's probably worth mentioning here, as you did in the subject line, that 
this is for the FU540-C000 platform.

> This driver is partially based on pnd2_edac.c and altera_edac.c
> 
> Initially L2 Cache controller is added as a subcomponent to
> this EDAC driver.
> 
> Signed-off-by: Yash Shah <yash.shah@sifive.com>
> ---
>  arch/riscv/Kconfig         |   1 +
>  drivers/edac/Kconfig       |  13 ++
>  drivers/edac/Makefile      |   1 +
>  drivers/edac/sifive_edac.c | 297 +++++++++++++++++++++++++++++++++++++++++++++
>  4 files changed, 312 insertions(+)
>  create mode 100644 drivers/edac/sifive_edac.c
> 
> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> index 515fc3c..fede4b6 100644
> --- a/arch/riscv/Kconfig
> +++ b/arch/riscv/Kconfig
> @@ -49,6 +49,7 @@ config RISCV
>  	select RISCV_TIMER
>  	select GENERIC_IRQ_MULTI_HANDLER
>  	select ARCH_HAS_PTE_SPECIAL
> +	select EDAC_SUPPORT
>  
>  config MMU
>  	def_bool y

This part of the patch either needs to get an ack from Palmer, or should 
be split into a final, separate patch that Palmer can merge separately.  
That way it will avoid unexpected merge conflicts if anything that Palmer 
merges changes this file.

> diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
> index e286b5b..112d9d1 100644
> --- a/drivers/edac/Kconfig
> +++ b/drivers/edac/Kconfig
> @@ -440,6 +440,19 @@ config EDAC_ALTERA_SDMMC
>  	  Support for error detection and correction on the
>  	  Altera SDMMC FIFO Memory for Altera SoCs.
>  
> +config EDAC_SIFIVE
> +	tristate "Sifive ECC"
> +	depends on RISCV
> +	help
> +	  Support for error detection and correction on the SiFive SoCs.
> +
> +config EDAC_SIFIVE_L2
> +	bool "SiFive L2 Cache ECC"
> +	depends on EDAC_SIFIVE=y
> +	help
> +	  Support for error detection and correction of the L2 cache
> +	  memory on SiFive SoCs.
> +
>  config EDAC_SYNOPSYS
>  	tristate "Synopsys DDR Memory Controller"
>  	depends on ARCH_ZYNQ || ARCH_ZYNQMP
> diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
> index 716096d..b16dce8 100644
> --- a/drivers/edac/Makefile
> +++ b/drivers/edac/Makefile
> @@ -74,6 +74,7 @@ obj-$(CONFIG_EDAC_OCTEON_PCI)		+= octeon_edac-pci.o
>  obj-$(CONFIG_EDAC_THUNDERX)		+= thunderx_edac.o
>  
>  obj-$(CONFIG_EDAC_ALTERA)		+= altera_edac.o
> +obj-$(CONFIG_EDAC_SIFIVE)		+= sifive_edac.o
>  obj-$(CONFIG_EDAC_SYNOPSYS)		+= synopsys_edac.o
>  obj-$(CONFIG_EDAC_XGENE)		+= xgene_edac.o
>  obj-$(CONFIG_EDAC_TI)			+= ti_edac.o
> diff --git a/drivers/edac/sifive_edac.c b/drivers/edac/sifive_edac.c
> new file mode 100644
> index 0000000..e11ae6b5
> --- /dev/null
> +++ b/drivers/edac/sifive_edac.c
> @@ -0,0 +1,297 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * SiFive EDAC Driver
> + *
> + * Copyright (C) 2018-2019 SiFive, Inc.
> + *
> + */
> +#include <linux/edac.h>
> +#include <linux/interrupt.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/of.h>
> +#include <linux/of_platform.h>
> +#include "edac_module.h"
> +
> +#define SIFIVE_EDAC_DIRFIX_LOW 0x100
> +#define SIFIVE_EDAC_DIRFIX_HIGH 0x104
> +#define SIFIVE_EDAC_DIRFIX_COUNT 0x108
> +
> +#define SIFIVE_EDAC_DATFIX_LOW 0x140
> +#define SIFIVE_EDAC_DATFIX_HIGH 0x144
> +#define SIFIVE_EDAC_DATFIX_COUNT 0x148
> +
> +#define SIFIVE_EDAC_DATFAIL_LOW 0x160
> +#define SIFIVE_EDAC_DATFAIL_HIGH 0x164
> +#define SIFIVE_EDAC_DATFAIL_COUNT 0x168
> +
> +#define SIFIVE_EDAC_ECCINJECTERR 0x40
> +#define SIFIVE_EDAC_CONFIG 0x00
> +
> +#define SIFIVE_EDAC_MAX_INTR 3
> +
> +/************************* EDAC Parent Probe *************************/
> +
> +static const struct of_device_id sifive_edac_device_of_match[];
> +
> +static const struct of_device_id sifive_edac_of_match[] = {
> +	{ .compatible = "sifive,ecc-manager" },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, sifive_edac_of_match);
> +
> +static int sifive_edac_probe(struct platform_device *pdev)
> +{
> +	of_platform_populate(pdev->dev.of_node, sifive_edac_device_of_match,
> +			     NULL, &pdev->dev);
> +	return 0;
> +}
> +
> +static struct platform_driver sifive_edac_driver = {
> +	.probe =  sifive_edac_probe,
> +	.driver = {
> +		.name = "ecc_manager",

As mentioned before we don't have an ECC manager IP block, so we probably 
should figure out a different approach here, if possible.

> +		.of_match_table = sifive_edac_of_match,
> +	},
> +};
> +module_platform_driver(sifive_edac_driver);
> +
> +struct sifive_edac_device_prv {
> +	void (*setup)(struct edac_device_ctl_info *dci);
> +	irqreturn_t (*ecc_irq_handler)(int irq, void *dev_id);
> +	const struct file_operations *inject_fops;
> +};
> +
> +struct sifive_edac_device_dev {
> +	void __iomem *base;
> +	int irq[SIFIVE_EDAC_MAX_INTR];
> +	struct sifive_edac_device_prv *data;
> +	char *edac_dev_name;
> +};
> +
> +enum {
> +	dir_corr = 0,
> +	data_corr,
> +	data_uncorr,
> +};

Best to put these in all caps, per coding-style.rst:

https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/process/coding-style.rst#n727

> +
> +static struct dentry *sifive_edac_test;
> +
> +static ssize_t sifive_edac_l2_write(struct file *file, const char __user *data,
> +				    size_t count, loff_t *ppos)
> +{
> +	struct edac_device_ctl_info *dci = file->private_data;
> +	struct sifive_edac_device_dev *drvdata = dci->pvt_info;
> +	unsigned int val;
> +
> +	if (kstrtouint_from_user(data, count, 0, &val))
> +		return -EINVAL;
> +	if ((val >= 0 && val < 0xFF) || (val >= 0x10000 && val < 0x100FF))
> +		writel(val, drvdata->base + SIFIVE_EDAC_ECCINJECTERR);
> +	else
> +		return -EINVAL;
> +	return count;
> +}
> +
> +static const struct file_operations sifive_edac_l2_fops = {
> +	.owner = THIS_MODULE,
> +	.open = simple_open,
> +	.write = sifive_edac_l2_write
> +};
> +
> +static void setup_sifive_debug(struct edac_device_ctl_info *edac_dci,
> +			       const struct sifive_edac_device_prv *prv)
> +{
> +	struct sifive_edac_device_dev *drvdata = edac_dci->pvt_info;
> +
> +	if (!IS_ENABLED(CONFIG_EDAC_DEBUG))
> +		return;

Can all of these debugfs functions be wrapped with an #if ... #endif such 
that, if CONFIG_EDAC_DEBUG is not set, they will all be stripped out by 
the preprocessor?

> +
> +	sifive_edac_test = edac_debugfs_create_dir(drvdata->edac_dev_name);
> +	if (!sifive_edac_test)
> +		return;
> +
> +	if (!edac_debugfs_create_file("sifive_debug_inject_error", 0200,
> +				      sifive_edac_test, edac_dci,
> +				      prv->inject_fops))
> +		debugfs_remove_recursive(sifive_edac_test);
> +}
> +
> +static void teardown_sifive_debug(void)
> +{
> +	debugfs_remove_recursive(sifive_edac_test);
> +}
> +
> +/*
> + * sifive_edac_l2_int_handler - ISR function for l2 cache controller
> + * @irq:	Irq Number
> + * @device:	Pointer to the edac device controller instance
> + *
> + * This routine is triggered whenever there is ECC error detected
> + *
> + * Return: Always returns IRQ_HANDLED
> + */
> +static irqreturn_t sifive_edac_l2_int_handler(int irq, void *device)
> +{
> +	struct edac_device_ctl_info *dci =
> +					(struct edac_device_ctl_info *)device;
> +	struct sifive_edac_device_dev *drvdata = dci->pvt_info;
> +	u32 regval, add_h, add_l;
> +
> +	if (irq == drvdata->irq[dir_corr]) {
> +		add_h = readl(drvdata->base + SIFIVE_EDAC_DIRFIX_HIGH);
> +		add_l = readl(drvdata->base + SIFIVE_EDAC_DIRFIX_LOW);
> +		dev_err(dci->dev,
> +			"DirError at address 0x%08X.%08X\n", add_h, add_l);
> +		regval = readl(drvdata->base + SIFIVE_EDAC_DIRFIX_COUNT);
> +		edac_device_handle_ce(dci, 0, 0, "DirECCFix");
> +	}
> +	if (irq == drvdata->irq[data_corr]) {
> +		add_h = readl(drvdata->base + SIFIVE_EDAC_DATFIX_HIGH);
> +		add_l = readl(drvdata->base + SIFIVE_EDAC_DATFIX_LOW);
> +		dev_err(dci->dev,
> +			"DataError at address 0x%08X.%08X\n", add_h, add_l);
> +		regval = readl(drvdata->base + SIFIVE_EDAC_DATFIX_COUNT);
> +		edac_device_handle_ce(dci, 0, 0, "DatECCFix");
> +	}
> +	if (irq == drvdata->irq[data_uncorr]) {
> +		add_h = readl(drvdata->base + SIFIVE_EDAC_DATFAIL_HIGH);
> +		add_l = readl(drvdata->base + SIFIVE_EDAC_DATFAIL_LOW);
> +		dev_err(dci->dev,
> +			"DataFail at address 0x%08X.%08X\n", add_h, add_l);
> +		regval = readl(drvdata->base + SIFIVE_EDAC_DATFAIL_COUNT);
> +		edac_device_handle_ue(dci, 0, 0, "DatECCFail");
> +	}
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static void sifive_edac_l2_config_read(struct edac_device_ctl_info *dci)
> +{
> +	struct sifive_edac_device_dev *drvdata = dci->pvt_info;
> +	u32 regval, val;
> +
> +	regval = readl(drvdata->base + SIFIVE_EDAC_CONFIG);
> +	val = regval & 0xFF;
> +	dev_info(dci->dev, "No. of Banks in the cache: %d\n", val);
> +	val = (regval & 0xFF00) >> 8;
> +	dev_info(dci->dev, "No. of ways per bank: %d\n", val);
> +	val = (regval & 0xFF0000) >> 16;
> +	dev_info(dci->dev, "Sets per bank: %llu\n", (uint64_t)1 << val);
> +	val = (regval & 0xFF000000) >> 24;
> +	dev_info(dci->dev,
> +		 "Bytes per cache block: %llu\n", (uint64_t)1 << val);
> +}
> +
> +static const struct sifive_edac_device_prv l2ecc_data = {
> +	.setup = sifive_edac_l2_config_read,
> +	.inject_fops = &sifive_edac_l2_fops,
> +	.ecc_irq_handler = sifive_edac_l2_int_handler,
> +};
> +
> +/*
> + * sifive_edac_device_probe()
> + *	This is a generic EDAC device driver that will support
> + *	various SiFive memory devices as well as the memories
> + *	for other peripherals. Module specific initialization is
> + *	done by passing the function index in the device tree.
> + */
> +static int sifive_edac_device_probe(struct platform_device *pdev)
> +{
> +	struct edac_device_ctl_info *dci;
> +	struct sifive_edac_device_dev *drvdata;
> +	int rc, i;
> +	struct resource *res;
> +	void __iomem *baseaddr;
> +	struct device_node *np = pdev->dev.of_node;
> +	char *ecc_name = (char *)np->name;
> +	static int dev_instance;
> +
> +	/* Get the data from the platform device */
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	baseaddr = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(baseaddr))
> +		return PTR_ERR(baseaddr);
> +
> +	dci = edac_device_alloc_ctl_info(sizeof(*drvdata), ecc_name,
> +					 1, ecc_name, 1, 1, NULL, 0,
> +					 dev_instance++);
> +	if (IS_ERR(dci))
> +		return PTR_ERR(dci);
> +
> +	drvdata = dci->pvt_info;
> +	drvdata->base = baseaddr;
> +	drvdata->edac_dev_name = ecc_name;
> +	dci->dev = &pdev->dev;
> +	dci->mod_name = "Sifive ECC Manager";
> +	dci->ctl_name = dev_name(&pdev->dev);
> +	dci->dev_name = dev_name(&pdev->dev);
> +
> +	 /* Get driver specific data for this EDAC device */
> +	drvdata->data = of_match_node(sifive_edac_device_of_match, np)->data;
> +
> +	setup_sifive_debug(dci, drvdata->data);
> +
> +	if (drvdata->data->setup)
> +		drvdata->data->setup(dci);
> +
> +	for (i = 0; i < SIFIVE_EDAC_MAX_INTR; i++) {
> +		drvdata->irq[i] = platform_get_irq(pdev, i);
> +		rc = devm_request_irq(&pdev->dev, drvdata->irq[i],
> +				      sifive_edac_l2_int_handler, 0,
> +				      dev_name(&pdev->dev), (void *)dci);
> +		if (rc) {
> +			dev_err(&pdev->dev,
> +				"Could not request IRQ %d\n", drvdata->irq[i]);
> +			goto del_edac_device;
> +		}
> +	}
> +
> +	rc = edac_device_add_device(dci);
> +	if (rc) {
> +		dev_err(&pdev->dev, "failed to register with EDAC core\n");
> +		goto del_edac_device;
> +	}
> +
> +	return rc;
> +
> +del_edac_device:
> +	teardown_sifive_debug();
> +	edac_device_del_device(&pdev->dev);
> +	edac_device_free_ctl_info(dci);
> +
> +	return rc;
> +}
> +
> +static int sifive_edac_device_remove(struct platform_device *pdev)
> +{
> +	struct edac_device_ctl_info *dci = platform_get_drvdata(pdev);
> +
> +	teardown_sifive_debug();
> +	edac_device_del_device(&pdev->dev);
> +	edac_device_free_ctl_info(dci);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id sifive_edac_device_of_match[] = {
> +	{ .compatible = "sifive,ccache0", .data = &l2ecc_data },

This match string should be "sifive,fu540-c000-ccache" if 
the intention is to probe against the L2 controller.

> +	{ /* end of table */ },
> +};
> +MODULE_DEVICE_TABLE(of, sifive_edac_device_of_match);
> +
> +static struct platform_driver sifive_edac_device_driver = {
> +	.driver = {
> +		 .name = "sifive_edac_device",
> +		 .owner = THIS_MODULE,
> +		 .of_match_table = sifive_edac_device_of_match,
> +	},
> +	.probe = sifive_edac_device_probe,
> +	.remove = sifive_edac_device_remove,
> +};
> +
> +module_platform_driver(sifive_edac_device_driver);
> +
> +MODULE_AUTHOR("SiFive Inc.");
> +MODULE_DESCRIPTION("SiFive EDAC driver");
> +MODULE_LICENSE("GPL v2");

- Paul
Borislav Petkov March 25, 2019, 6:57 a.m. UTC | #4 
On Sun, Mar 24, 2019 at 05:23:27PM -0700, Paul Walmsley wrote:
> > +	if (!IS_ENABLED(CONFIG_EDAC_DEBUG))
> > +		return;
> 
> Can all of these debugfs functions be wrapped with an #if ... #endif such 
> that, if CONFIG_EDAC_DEBUG is not set, they will all be stripped out by 
> the preprocessor?

Why would you make the code more ugly with ifdeffery?

Do you have any serious code size constraints so that you absolutely
need to remove a couple of KBs?
Paul Walmsley March 25, 2019, 9:26 p.m. UTC | #5 
On Mon, 25 Mar 2019, Borislav Petkov wrote:

> On Sun, Mar 24, 2019 at 05:23:27PM -0700, Paul Walmsley wrote:
> > > +	if (!IS_ENABLED(CONFIG_EDAC_DEBUG))
> > > +		return;
> > 
> > Can all of these debugfs functions be wrapped with an #if ... #endif such 
> > that, if CONFIG_EDAC_DEBUG is not set, they will all be stripped out by 
> > the preprocessor?
> 
> Why would you make the code more ugly with ifdeffery?
> 
> Do you have any serious code size constraints so that you absolutely
> need to remove a couple of KBs?

We'll definitely take the RAM savings that a few #ifdefs will deliver to 
us.  They add up.  We're selling chips for embedded use cases, not just 
big-iron x86 systems.

Other EDAC drivers have far more #ifdef lines than the single set that I'm 
proposing, so I don't understand why you're singling this driver out for 
criticism.  Consider:

./altera_edac.c:#ifdef CONFIG_EDAC_ALTERA_SDRAM
./altera_edac.c:#ifdef CONFIG_EDAC_ALTERA_L2C
./altera_edac.c:#ifdef CONFIG_EDAC_ALTERA_OCRAM
./altera_edac.c:#ifdef CONFIG_EDAC_ALTERA_OCRAM
./altera_edac.c:#ifdef CONFIG_EDAC_ALTERA_L2C
./altera_edac.c:#ifdef CONFIG_EDAC_ALTERA_ETHERNET
./altera_edac.c:#ifdef CONFIG_EDAC_ALTERA_NAND
./altera_edac.c:#ifdef CONFIG_EDAC_ALTERA_DMA
./altera_edac.c:#ifdef CONFIG_EDAC_ALTERA_USB
./altera_edac.c:#ifdef CONFIG_EDAC_ALTERA_QSPI
./altera_edac.c:#ifdef CONFIG_EDAC_ALTERA_SDMMC
./altera_edac.c:#ifdef CONFIG_EDAC_ALTERA_L2C
./altera_edac.c:#ifdef CONFIG_EDAC_ALTERA_OCRAM
./altera_edac.c:#ifdef CONFIG_EDAC_ALTERA_ETHERNET
./altera_edac.c:#ifdef CONFIG_EDAC_ALTERA_NAND
./altera_edac.c:#ifdef CONFIG_EDAC_ALTERA_DMA
./altera_edac.c:#ifdef CONFIG_EDAC_ALTERA_USB
./altera_edac.c:#ifdef CONFIG_EDAC_ALTERA_QSPI
./altera_edac.c:#ifdef CONFIG_EDAC_ALTERA_SDMMC
./altera_edac.c:#ifdef CONFIG_EDAC_ALTERA_SDRAM
./synopsys_edac.c:#ifdef CONFIG_EDAC_DEBUG
./synopsys_edac.c:#ifdef CONFIG_EDAC_DEBUG
./synopsys_edac.c:#ifdef CONFIG_EDAC_DEBUG
./synopsys_edac.c:#ifdef CONFIG_EDAC_DEBUG
./synopsys_edac.c:#ifdef CONFIG_EDAC_DEBUG


- Paul
Borislav Petkov March 25, 2019, 9:50 p.m. UTC | #6 
On Mon, Mar 25, 2019 at 02:26:52PM -0700, Paul Walmsley wrote:
> We'll definitely take the RAM savings that a few #ifdefs will deliver to 
> us.  They add up.  We're selling chips for embedded use cases, not just 
> big-iron x86 systems.

Fair enough.

Btw, while we're at it, this driver would need a MAINTAINERS entry so
that you guys can get CCed on bugs.

Thx.
Paul Walmsley March 29, 2019, 7:45 p.m. UTC | #7 
On Wed, 20 Mar 2019, Yash Shah wrote:

> This EDAC driver supports:
> - Initial configuration reporting on bootup via debug logs
> - ECC event monitoring and reporting through the EDAC framework
> - ECC event injection
> 
> This driver is partially based on pnd2_edac.c and altera_edac.c
> 
> Initially L2 Cache controller is added as a subcomponent to
> this EDAC driver.
> 
> Signed-off-by: Yash Shah <yash.shah@sifive.com>

Based on the discussion with Borislav, we're going to move the L2 driver 
elsewhere in the tree.  We'll look into creating a platform-specific EDAC 
driver on top of that.


- Paul
diff mbox series

Patch

diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 515fc3c..fede4b6 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -49,6 +49,7 @@  config RISCV
 	select RISCV_TIMER
 	select GENERIC_IRQ_MULTI_HANDLER
 	select ARCH_HAS_PTE_SPECIAL
+	select EDAC_SUPPORT
 
 config MMU
 	def_bool y
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index e286b5b..112d9d1 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -440,6 +440,19 @@  config EDAC_ALTERA_SDMMC
 	  Support for error detection and correction on the
 	  Altera SDMMC FIFO Memory for Altera SoCs.
 
+config EDAC_SIFIVE
+	tristate "Sifive ECC"
+	depends on RISCV
+	help
+	  Support for error detection and correction on the SiFive SoCs.
+
+config EDAC_SIFIVE_L2
+	bool "SiFive L2 Cache ECC"
+	depends on EDAC_SIFIVE=y
+	help
+	  Support for error detection and correction of the L2 cache
+	  memory on SiFive SoCs.
+
 config EDAC_SYNOPSYS
 	tristate "Synopsys DDR Memory Controller"
 	depends on ARCH_ZYNQ || ARCH_ZYNQMP
diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
index 716096d..b16dce8 100644
--- a/drivers/edac/Makefile
+++ b/drivers/edac/Makefile
@@ -74,6 +74,7 @@  obj-$(CONFIG_EDAC_OCTEON_PCI)		+= octeon_edac-pci.o
 obj-$(CONFIG_EDAC_THUNDERX)		+= thunderx_edac.o
 
 obj-$(CONFIG_EDAC_ALTERA)		+= altera_edac.o
+obj-$(CONFIG_EDAC_SIFIVE)		+= sifive_edac.o
 obj-$(CONFIG_EDAC_SYNOPSYS)		+= synopsys_edac.o
 obj-$(CONFIG_EDAC_XGENE)		+= xgene_edac.o
 obj-$(CONFIG_EDAC_TI)			+= ti_edac.o
diff --git a/drivers/edac/sifive_edac.c b/drivers/edac/sifive_edac.c
new file mode 100644
index 0000000..e11ae6b5
--- /dev/null
+++ b/drivers/edac/sifive_edac.c
@@ -0,0 +1,297 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SiFive EDAC Driver
+ *
+ * Copyright (C) 2018-2019 SiFive, Inc.
+ *
+ */
+#include <linux/edac.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include "edac_module.h"
+
+#define SIFIVE_EDAC_DIRFIX_LOW 0x100
+#define SIFIVE_EDAC_DIRFIX_HIGH 0x104
+#define SIFIVE_EDAC_DIRFIX_COUNT 0x108
+
+#define SIFIVE_EDAC_DATFIX_LOW 0x140
+#define SIFIVE_EDAC_DATFIX_HIGH 0x144
+#define SIFIVE_EDAC_DATFIX_COUNT 0x148
+
+#define SIFIVE_EDAC_DATFAIL_LOW 0x160
+#define SIFIVE_EDAC_DATFAIL_HIGH 0x164
+#define SIFIVE_EDAC_DATFAIL_COUNT 0x168
+
+#define SIFIVE_EDAC_ECCINJECTERR 0x40
+#define SIFIVE_EDAC_CONFIG 0x00
+
+#define SIFIVE_EDAC_MAX_INTR 3
+
+/************************* EDAC Parent Probe *************************/
+
+static const struct of_device_id sifive_edac_device_of_match[];
+
+static const struct of_device_id sifive_edac_of_match[] = {
+	{ .compatible = "sifive,ecc-manager" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, sifive_edac_of_match);
+
+static int sifive_edac_probe(struct platform_device *pdev)
+{
+	of_platform_populate(pdev->dev.of_node, sifive_edac_device_of_match,
+			     NULL, &pdev->dev);
+	return 0;
+}
+
+static struct platform_driver sifive_edac_driver = {
+	.probe =  sifive_edac_probe,
+	.driver = {
+		.name = "ecc_manager",
+		.of_match_table = sifive_edac_of_match,
+	},
+};
+module_platform_driver(sifive_edac_driver);
+
+struct sifive_edac_device_prv {
+	void (*setup)(struct edac_device_ctl_info *dci);
+	irqreturn_t (*ecc_irq_handler)(int irq, void *dev_id);
+	const struct file_operations *inject_fops;
+};
+
+struct sifive_edac_device_dev {
+	void __iomem *base;
+	int irq[SIFIVE_EDAC_MAX_INTR];
+	struct sifive_edac_device_prv *data;
+	char *edac_dev_name;
+};
+
+enum {
+	dir_corr = 0,
+	data_corr,
+	data_uncorr,
+};
+
+static struct dentry *sifive_edac_test;
+
+static ssize_t sifive_edac_l2_write(struct file *file, const char __user *data,
+				    size_t count, loff_t *ppos)
+{
+	struct edac_device_ctl_info *dci = file->private_data;
+	struct sifive_edac_device_dev *drvdata = dci->pvt_info;
+	unsigned int val;
+
+	if (kstrtouint_from_user(data, count, 0, &val))
+		return -EINVAL;
+	if ((val >= 0 && val < 0xFF) || (val >= 0x10000 && val < 0x100FF))
+		writel(val, drvdata->base + SIFIVE_EDAC_ECCINJECTERR);
+	else
+		return -EINVAL;
+	return count;
+}
+
+static const struct file_operations sifive_edac_l2_fops = {
+	.owner = THIS_MODULE,
+	.open = simple_open,
+	.write = sifive_edac_l2_write
+};
+
+static void setup_sifive_debug(struct edac_device_ctl_info *edac_dci,
+			       const struct sifive_edac_device_prv *prv)
+{
+	struct sifive_edac_device_dev *drvdata = edac_dci->pvt_info;
+
+	if (!IS_ENABLED(CONFIG_EDAC_DEBUG))
+		return;
+
+	sifive_edac_test = edac_debugfs_create_dir(drvdata->edac_dev_name);
+	if (!sifive_edac_test)
+		return;
+
+	if (!edac_debugfs_create_file("sifive_debug_inject_error", 0200,
+				      sifive_edac_test, edac_dci,
+				      prv->inject_fops))
+		debugfs_remove_recursive(sifive_edac_test);
+}
+
+static void teardown_sifive_debug(void)
+{
+	debugfs_remove_recursive(sifive_edac_test);
+}
+
+/*
+ * sifive_edac_l2_int_handler - ISR function for l2 cache controller
+ * @irq:	Irq Number
+ * @device:	Pointer to the edac device controller instance
+ *
+ * This routine is triggered whenever there is ECC error detected
+ *
+ * Return: Always returns IRQ_HANDLED
+ */
+static irqreturn_t sifive_edac_l2_int_handler(int irq, void *device)
+{
+	struct edac_device_ctl_info *dci =
+					(struct edac_device_ctl_info *)device;
+	struct sifive_edac_device_dev *drvdata = dci->pvt_info;
+	u32 regval, add_h, add_l;
+
+	if (irq == drvdata->irq[dir_corr]) {
+		add_h = readl(drvdata->base + SIFIVE_EDAC_DIRFIX_HIGH);
+		add_l = readl(drvdata->base + SIFIVE_EDAC_DIRFIX_LOW);
+		dev_err(dci->dev,
+			"DirError at address 0x%08X.%08X\n", add_h, add_l);
+		regval = readl(drvdata->base + SIFIVE_EDAC_DIRFIX_COUNT);
+		edac_device_handle_ce(dci, 0, 0, "DirECCFix");
+	}
+	if (irq == drvdata->irq[data_corr]) {
+		add_h = readl(drvdata->base + SIFIVE_EDAC_DATFIX_HIGH);
+		add_l = readl(drvdata->base + SIFIVE_EDAC_DATFIX_LOW);
+		dev_err(dci->dev,
+			"DataError at address 0x%08X.%08X\n", add_h, add_l);
+		regval = readl(drvdata->base + SIFIVE_EDAC_DATFIX_COUNT);
+		edac_device_handle_ce(dci, 0, 0, "DatECCFix");
+	}
+	if (irq == drvdata->irq[data_uncorr]) {
+		add_h = readl(drvdata->base + SIFIVE_EDAC_DATFAIL_HIGH);
+		add_l = readl(drvdata->base + SIFIVE_EDAC_DATFAIL_LOW);
+		dev_err(dci->dev,
+			"DataFail at address 0x%08X.%08X\n", add_h, add_l);
+		regval = readl(drvdata->base + SIFIVE_EDAC_DATFAIL_COUNT);
+		edac_device_handle_ue(dci, 0, 0, "DatECCFail");
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void sifive_edac_l2_config_read(struct edac_device_ctl_info *dci)
+{
+	struct sifive_edac_device_dev *drvdata = dci->pvt_info;
+	u32 regval, val;
+
+	regval = readl(drvdata->base + SIFIVE_EDAC_CONFIG);
+	val = regval & 0xFF;
+	dev_info(dci->dev, "No. of Banks in the cache: %d\n", val);
+	val = (regval & 0xFF00) >> 8;
+	dev_info(dci->dev, "No. of ways per bank: %d\n", val);
+	val = (regval & 0xFF0000) >> 16;
+	dev_info(dci->dev, "Sets per bank: %llu\n", (uint64_t)1 << val);
+	val = (regval & 0xFF000000) >> 24;
+	dev_info(dci->dev,
+		 "Bytes per cache block: %llu\n", (uint64_t)1 << val);
+}
+
+static const struct sifive_edac_device_prv l2ecc_data = {
+	.setup = sifive_edac_l2_config_read,
+	.inject_fops = &sifive_edac_l2_fops,
+	.ecc_irq_handler = sifive_edac_l2_int_handler,
+};
+
+/*
+ * sifive_edac_device_probe()
+ *	This is a generic EDAC device driver that will support
+ *	various SiFive memory devices as well as the memories
+ *	for other peripherals. Module specific initialization is
+ *	done by passing the function index in the device tree.
+ */
+static int sifive_edac_device_probe(struct platform_device *pdev)
+{
+	struct edac_device_ctl_info *dci;
+	struct sifive_edac_device_dev *drvdata;
+	int rc, i;
+	struct resource *res;
+	void __iomem *baseaddr;
+	struct device_node *np = pdev->dev.of_node;
+	char *ecc_name = (char *)np->name;
+	static int dev_instance;
+
+	/* Get the data from the platform device */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	baseaddr = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(baseaddr))
+		return PTR_ERR(baseaddr);
+
+	dci = edac_device_alloc_ctl_info(sizeof(*drvdata), ecc_name,
+					 1, ecc_name, 1, 1, NULL, 0,
+					 dev_instance++);
+	if (IS_ERR(dci))
+		return PTR_ERR(dci);
+
+	drvdata = dci->pvt_info;
+	drvdata->base = baseaddr;
+	drvdata->edac_dev_name = ecc_name;
+	dci->dev = &pdev->dev;
+	dci->mod_name = "Sifive ECC Manager";
+	dci->ctl_name = dev_name(&pdev->dev);
+	dci->dev_name = dev_name(&pdev->dev);
+
+	 /* Get driver specific data for this EDAC device */
+	drvdata->data = of_match_node(sifive_edac_device_of_match, np)->data;
+
+	setup_sifive_debug(dci, drvdata->data);
+
+	if (drvdata->data->setup)
+		drvdata->data->setup(dci);
+
+	for (i = 0; i < SIFIVE_EDAC_MAX_INTR; i++) {
+		drvdata->irq[i] = platform_get_irq(pdev, i);
+		rc = devm_request_irq(&pdev->dev, drvdata->irq[i],
+				      sifive_edac_l2_int_handler, 0,
+				      dev_name(&pdev->dev), (void *)dci);
+		if (rc) {
+			dev_err(&pdev->dev,
+				"Could not request IRQ %d\n", drvdata->irq[i]);
+			goto del_edac_device;
+		}
+	}
+
+	rc = edac_device_add_device(dci);
+	if (rc) {
+		dev_err(&pdev->dev, "failed to register with EDAC core\n");
+		goto del_edac_device;
+	}
+
+	return rc;
+
+del_edac_device:
+	teardown_sifive_debug();
+	edac_device_del_device(&pdev->dev);
+	edac_device_free_ctl_info(dci);
+
+	return rc;
+}
+
+static int sifive_edac_device_remove(struct platform_device *pdev)
+{
+	struct edac_device_ctl_info *dci = platform_get_drvdata(pdev);
+
+	teardown_sifive_debug();
+	edac_device_del_device(&pdev->dev);
+	edac_device_free_ctl_info(dci);
+
+	return 0;
+}
+
+static const struct of_device_id sifive_edac_device_of_match[] = {
+	{ .compatible = "sifive,ccache0", .data = &l2ecc_data },
+	{ /* end of table */ },
+};
+MODULE_DEVICE_TABLE(of, sifive_edac_device_of_match);
+
+static struct platform_driver sifive_edac_device_driver = {
+	.driver = {
+		 .name = "sifive_edac_device",
+		 .owner = THIS_MODULE,
+		 .of_match_table = sifive_edac_device_of_match,
+	},
+	.probe = sifive_edac_device_probe,
+	.remove = sifive_edac_device_remove,
+};
+
+module_platform_driver(sifive_edac_device_driver);
+
+MODULE_AUTHOR("SiFive Inc.");
+MODULE_DESCRIPTION("SiFive EDAC driver");
+MODULE_LICENSE("GPL v2");