| Message ID | 3319783f60fedd7f0029dd60a51c76a75003fe05.1553523114.git.agx@sigxcpu.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Mixel DPHY support for i.MX8 | expand |
On Mon, Mar 25, 2019 at 9:14 AM Guido Günther <agx@sigxcpu.org> wrote: > > Add support for the MIXEL DPHY IP as found in the NXP's i.MX8MQ. Please use get_maintainers.pl and send patches to the correct lists. > > Signed-off-by: Guido Günther <agx@sigxcpu.org> > Reviewed-by: Sam Ravnborg <sam@ravnborg.org> > --- > .../bindings/phy/mixel,mipi-dsi-phy.txt | 29 +++++++++++++++++++ > 1 file changed, 29 insertions(+) > create mode 100644 Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt > > diff --git a/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt > new file mode 100644 > index 000000000000..d3646580412a > --- /dev/null > +++ b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt > @@ -0,0 +1,29 @@ > +Mixel DSI PHY for i.MX8 > + > +The Mixel MIPI-DSI PHY IP block is e.g. found on i.MX8 platforms (along the > +MIPI-DSI IP from Northwest Logic). It represents the physical layer for the > +electrical signals for DSI. > + > +Required properties: > +- compatible: Must be: > + - "mixel,imx8mq-mipi-dphy" > +- clocks: Must contain an entry for each entry in clock-names. > +- clock-names: Must contain the following entries: > + - "phy_ref": phandle and specifier referring to the DPHY ref clock > +- reg: the register range of the PHY controller > +- #phy-cells: number of cells in PHY, as defined in > + Documentation/devicetree/bindings/phy/phy-bindings.txt > + this must be <0> > + > +Optional properties: > +- power-domains: phandle to power domain > + > +Example: > + mipi_dphy: mipi_dphy@30A0030 { dphy@30a0030 > + compatible = "mixel,imx8mq-mipi-dphy"; > + clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>; > + clock-names = "phy_ref"; > + reg = <0x30A00300 0x100>; > + power-domains = <&pd_mipi0>; > + #phy-cells = <0>; > + }; > -- > 2.20.1 > > _______________________________________________ > dri-devel mailing list > dri-devel@lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/dri-devel
diff --git a/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt new file mode 100644 index 000000000000..d3646580412a --- /dev/null +++ b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt @@ -0,0 +1,29 @@ +Mixel DSI PHY for i.MX8 + +The Mixel MIPI-DSI PHY IP block is e.g. found on i.MX8 platforms (along the +MIPI-DSI IP from Northwest Logic). It represents the physical layer for the +electrical signals for DSI. + +Required properties: +- compatible: Must be: + - "mixel,imx8mq-mipi-dphy" +- clocks: Must contain an entry for each entry in clock-names. +- clock-names: Must contain the following entries: + - "phy_ref": phandle and specifier referring to the DPHY ref clock +- reg: the register range of the PHY controller +- #phy-cells: number of cells in PHY, as defined in + Documentation/devicetree/bindings/phy/phy-bindings.txt + this must be <0> + +Optional properties: +- power-domains: phandle to power domain + +Example: + mipi_dphy: mipi_dphy@30A0030 { + compatible = "mixel,imx8mq-mipi-dphy"; + clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>; + clock-names = "phy_ref"; + reg = <0x30A00300 0x100>; + power-domains = <&pd_mipi0>; + #phy-cells = <0>; + };