| Message ID | 20190311133122.11417-18-s.miroshnichenko@yadro.com (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Bjorn Helgaas |
| Headers | show |
| Series | PCI: Allow BAR movement during hotplug | expand |
On Mon, Mar 11, 2019 at 04:31:18PM +0300, Sergey Miroshnichenko wrote: > If a bridge window contains fixed areas (there are PCIe devices with > immovable BARs located on this bus), I think what you mean by "immovable BARs" is "drivers that don't support moving BARs". I want to keep the concept of legacy and EA resources separate because those are immovable in principle, but drivers can always be improved. > this window must be allocated > within the bound memory area, limited by windows size and by address > range of fixed resources, calculated as follows: > > | <-- bus's fixed_range_hard --> | > | <-- fixed_range_hard.end - window size --> | > | <-- fixed_range_hard.start + window size --> | > | <-- bus's fixed_range_soft --> | > > Signed-off-by: Sergey Miroshnichenko <s.miroshnichenko@yadro.com> > --- > drivers/pci/setup-bus.c | 56 +++++++++++++++++++++++++++++++++++++++++ > include/linux/pci.h | 4 ++- > 2 files changed, 59 insertions(+), 1 deletion(-) > > diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c > index a1fd7f3c5ea8..f4737339d5ec 100644 > --- a/drivers/pci/setup-bus.c > +++ b/drivers/pci/setup-bus.c > @@ -1809,6 +1809,61 @@ static enum enable_type pci_realloc_detect(struct pci_bus *bus, > } > #endif > > +static void pci_bus_update_fixed_range_soft(struct pci_bus *bus) > +{ > + struct pci_dev *dev; > + struct pci_bus *parent = bus->parent; > + int idx; > + > + list_for_each_entry(dev, &bus->devices, bus_list) > + if (dev->subordinate) > + pci_bus_update_fixed_range_soft(dev->subordinate); > + > + if (!parent || !bus->self) > + return; > + > + for (idx = 0; idx < ARRAY_SIZE(bus->fixed_range_hard); ++idx) { > + struct resource *r; > + resource_size_t soft_start, soft_end; > + resource_size_t hard_start = bus->fixed_range_hard[idx].start; > + resource_size_t hard_end = bus->fixed_range_hard[idx].end; > + > + if (hard_start > hard_end) > + continue; > + > + r = bus->resource[idx]; > + > + soft_start = hard_end - resource_size(r) + 1; > + soft_end = hard_start + resource_size(r) - 1; > + > + if (soft_start > hard_start) > + soft_start = hard_start; > + > + if (soft_end < hard_end) > + soft_end = hard_end; > + > + list_for_each_entry(dev, &parent->devices, bus_list) { > + struct pci_bus *sibling = dev->subordinate; > + resource_size_t s_start, s_end; > + > + if (!sibling || sibling == bus) > + continue; > + > + s_start = sibling->fixed_range_hard[idx].start; > + s_end = sibling->fixed_range_hard[idx].end; > + > + if (s_start > s_end) > + continue; > + > + if (s_end < hard_start && s_end > soft_start) > + soft_start = s_end; > + } > + > + bus->fixed_range_soft[idx].start = soft_start; > + bus->fixed_range_soft[idx].end = soft_end; > + } > +} > + > /* > * first try will not touch pci bridge res > * second and later try will clear small leaf bridge res > @@ -1847,6 +1902,7 @@ void pci_assign_unassigned_root_bus_resources(struct pci_bus *bus) > /* Depth first, calculate sizes and alignments of all > subordinate buses. */ > __pci_bus_size_bridges(bus, add_list); > + pci_bus_update_fixed_range_soft(bus); > > /* Depth last, allocate resources and update the hardware. */ > __pci_bus_assign_resources(bus, add_list, &fail_head); > diff --git a/include/linux/pci.h b/include/linux/pci.h > index 7a4d62d84bc1..75a56db73ad4 100644 > --- a/include/linux/pci.h > +++ b/include/linux/pci.h > @@ -574,9 +574,11 @@ struct pci_bus { > > /* > * If there are fixed resources in the bridge window, the hard range > - * contains the lowest and the highest addresses of them. > + * contains the lowest and the highest addresses of them, and this > + * bridge window must reside within the soft range. > */ > struct resource fixed_range_hard[PCI_BRIDGE_RESOURCE_NUM]; > + struct resource fixed_range_soft[PCI_BRIDGE_RESOURCE_NUM]; > > struct pci_ops *ops; /* Configuration access functions */ > struct msi_controller *msi; /* MSI controller */ > -- > 2.20.1 >
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index a1fd7f3c5ea8..f4737339d5ec 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -1809,6 +1809,61 @@ static enum enable_type pci_realloc_detect(struct pci_bus *bus, } #endif +static void pci_bus_update_fixed_range_soft(struct pci_bus *bus) +{ + struct pci_dev *dev; + struct pci_bus *parent = bus->parent; + int idx; + + list_for_each_entry(dev, &bus->devices, bus_list) + if (dev->subordinate) + pci_bus_update_fixed_range_soft(dev->subordinate); + + if (!parent || !bus->self) + return; + + for (idx = 0; idx < ARRAY_SIZE(bus->fixed_range_hard); ++idx) { + struct resource *r; + resource_size_t soft_start, soft_end; + resource_size_t hard_start = bus->fixed_range_hard[idx].start; + resource_size_t hard_end = bus->fixed_range_hard[idx].end; + + if (hard_start > hard_end) + continue; + + r = bus->resource[idx]; + + soft_start = hard_end - resource_size(r) + 1; + soft_end = hard_start + resource_size(r) - 1; + + if (soft_start > hard_start) + soft_start = hard_start; + + if (soft_end < hard_end) + soft_end = hard_end; + + list_for_each_entry(dev, &parent->devices, bus_list) { + struct pci_bus *sibling = dev->subordinate; + resource_size_t s_start, s_end; + + if (!sibling || sibling == bus) + continue; + + s_start = sibling->fixed_range_hard[idx].start; + s_end = sibling->fixed_range_hard[idx].end; + + if (s_start > s_end) + continue; + + if (s_end < hard_start && s_end > soft_start) + soft_start = s_end; + } + + bus->fixed_range_soft[idx].start = soft_start; + bus->fixed_range_soft[idx].end = soft_end; + } +} + /* * first try will not touch pci bridge res * second and later try will clear small leaf bridge res @@ -1847,6 +1902,7 @@ void pci_assign_unassigned_root_bus_resources(struct pci_bus *bus) /* Depth first, calculate sizes and alignments of all subordinate buses. */ __pci_bus_size_bridges(bus, add_list); + pci_bus_update_fixed_range_soft(bus); /* Depth last, allocate resources and update the hardware. */ __pci_bus_assign_resources(bus, add_list, &fail_head); diff --git a/include/linux/pci.h b/include/linux/pci.h index 7a4d62d84bc1..75a56db73ad4 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -574,9 +574,11 @@ struct pci_bus { /* * If there are fixed resources in the bridge window, the hard range - * contains the lowest and the highest addresses of them. + * contains the lowest and the highest addresses of them, and this + * bridge window must reside within the soft range. */ struct resource fixed_range_hard[PCI_BRIDGE_RESOURCE_NUM]; + struct resource fixed_range_soft[PCI_BRIDGE_RESOURCE_NUM]; struct pci_ops *ops; /* Configuration access functions */ struct msi_controller *msi; /* MSI controller */
If a bridge window contains fixed areas (there are PCIe devices with immovable BARs located on this bus), this window must be allocated within the bound memory area, limited by windows size and by address range of fixed resources, calculated as follows: | <-- bus's fixed_range_hard --> | | <-- fixed_range_hard.end - window size --> | | <-- fixed_range_hard.start + window size --> | | <-- bus's fixed_range_soft --> | Signed-off-by: Sergey Miroshnichenko <s.miroshnichenko@yadro.com> --- drivers/pci/setup-bus.c | 56 +++++++++++++++++++++++++++++++++++++++++ include/linux/pci.h | 4 ++- 2 files changed, 59 insertions(+), 1 deletion(-)