diff mbox series

ARM: dts: sun8i: a83t: Add missing cooling device properties for CPUs

Message ID 20190327004837.10384-1-megous@megous.com (mailing list archive)
State New, archived
Headers show
Series ARM: dts: sun8i: a83t: Add missing cooling device properties for CPUs | expand

Commit Message

Ondřej Jirman March 27, 2019, 12:48 a.m. UTC 
From: Ondrej Jirman <megous@megous.com>

This is inspired by the similar patch for H3. Original description
applies, and is copied below:

The cooling device properties, like "#cooling-cells" and
"dynamic-power-coefficient", should either be present for all the CPUs
of a cluster or none. If these are present only for a subset of CPUs of
a cluster then things will start falling apart as soon as the CPUs are
brought online in a different order. For example, this will happen
because the operating system looks for such properties in the CPU node
it is trying to bring up, so that it can register a cooling device.

Add such missing properties.

Fix other missing properties (clocks, clock-names) as well to make it all
work.

Signed-off-by: Ondrej Jirman <megous@megous.com>
---
 arch/arm/boot/dts/sun8i-a83t.dtsi | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

Comments

Chen-Yu Tsai March 28, 2019, 8:04 a.m. UTC | #1 
On Wed, Mar 27, 2019 at 8:49 AM megous via linux-sunxi
<linux-sunxi@googlegroups.com> wrote:
>
> From: Ondrej Jirman <megous@megous.com>
>
> This is inspired by the similar patch for H3. Original description
> applies, and is copied below:
>
> The cooling device properties, like "#cooling-cells" and
> "dynamic-power-coefficient", should either be present for all the CPUs
> of a cluster or none. If these are present only for a subset of CPUs of
> a cluster then things will start falling apart as soon as the CPUs are
> brought online in a different order. For example, this will happen
> because the operating system looks for such properties in the CPU node
> it is trying to bring up, so that it can register a cooling device.
>
> Add such missing properties.
>
> Fix other missing properties (clocks, clock-names) as well to make it all
> work.

Could you split this out into a separate patch? It actually touches more
lines than the primary part of your patch.

ChenYu
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index fcb7ef5ce2df..1b0b025b9250 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -69,33 +69,43 @@ 
 			cci-control-port = <&cci_control0>;
 			enable-method = "allwinner,sun8i-a83t-smp";
 			reg = <0>;
+			#cooling-cells = <2>;
 		};
 
 		cpu@1 {
+			clocks = <&ccu CLK_C0CPUX>;
+			clock-names = "cpu";
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			operating-points-v2 = <&cpu0_opp_table>;
 			cci-control-port = <&cci_control0>;
 			enable-method = "allwinner,sun8i-a83t-smp";
 			reg = <1>;
+			#cooling-cells = <2>;
 		};
 
 		cpu@2 {
+			clocks = <&ccu CLK_C0CPUX>;
+			clock-names = "cpu";
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			operating-points-v2 = <&cpu0_opp_table>;
 			cci-control-port = <&cci_control0>;
 			enable-method = "allwinner,sun8i-a83t-smp";
 			reg = <2>;
+			#cooling-cells = <2>;
 		};
 
 		cpu@3 {
+			clocks = <&ccu CLK_C0CPUX>;
+			clock-names = "cpu";
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			operating-points-v2 = <&cpu0_opp_table>;
 			cci-control-port = <&cci_control0>;
 			enable-method = "allwinner,sun8i-a83t-smp";
 			reg = <3>;
+			#cooling-cells = <2>;
 		};
 
 		cpu100: cpu@100 {
@@ -107,33 +117,43 @@ 
 			cci-control-port = <&cci_control1>;
 			enable-method = "allwinner,sun8i-a83t-smp";
 			reg = <0x100>;
+			#cooling-cells = <2>;
 		};
 
 		cpu@101 {
+			clocks = <&ccu CLK_C1CPUX>;
+			clock-names = "cpu";
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			operating-points-v2 = <&cpu1_opp_table>;
 			cci-control-port = <&cci_control1>;
 			enable-method = "allwinner,sun8i-a83t-smp";
 			reg = <0x101>;
+			#cooling-cells = <2>;
 		};
 
 		cpu@102 {
+			clocks = <&ccu CLK_C1CPUX>;
+			clock-names = "cpu";
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			operating-points-v2 = <&cpu1_opp_table>;
 			cci-control-port = <&cci_control1>;
 			enable-method = "allwinner,sun8i-a83t-smp";
 			reg = <0x102>;
+			#cooling-cells = <2>;
 		};
 
 		cpu@103 {
+			clocks = <&ccu CLK_C1CPUX>;
+			clock-names = "cpu";
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			operating-points-v2 = <&cpu1_opp_table>;
 			cci-control-port = <&cci_control1>;
 			enable-method = "allwinner,sun8i-a83t-smp";
 			reg = <0x103>;
+			#cooling-cells = <2>;
 		};
 	};