| Message ID | 20190329181313.21009-4-afd@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/4] ARM: dts: imx6: RDU2: Use new CODEC reset pin name | expand |
* Andrew F. Davis <afd@ti.com> [190329 11:13]: > The correct DT property for specifying a GPIO used for reset > is "reset-gpios", the driver now accepts this name, use it here. I'll apply this patch into omap-for-v5.2/dt thanks. Tony
diff --git a/arch/arm/boot/dts/omap2420-n810.dts b/arch/arm/boot/dts/omap2420-n810.dts index 96b9913ecc1f..09c1dbc0bb69 100644 --- a/arch/arm/boot/dts/omap2420-n810.dts +++ b/arch/arm/boot/dts/omap2420-n810.dts @@ -48,7 +48,7 @@ pinctrl-names = "default"; pinctrl-0 = <&aic33_pins>; - gpio-reset = <&gpio4 22 GPIO_ACTIVE_LOW>; /* gpio118 */ + reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; /* gpio118 */ ai3x-gpio-func = < 10 /* AIC3X_GPIO1_FUNC_DIGITAL_MIC_MODCLK */
The correct DT property for specifying a GPIO used for reset is "reset-gpios", the driver now accepts this name, use it here. Signed-off-by: Andrew F. Davis <afd@ti.com> --- arch/arm/boot/dts/omap2420-n810.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)