| Message ID | 20190329215455.159717-1-dianders@chromium.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | clk: rockchip: Fix video codec clocks on rk3288 | expand |
On Fri, 29 Mar 2019 at 18:55, Douglas Anderson <dianders@chromium.org> wrote: > > It appears that there is a typo in the rk3288 TRM. For > GRF_SOC_CON0[7] it says that 0 means "vepu" and 1 means "vdpu". It's > the other way around. > > How do I know? Here's my evidence: > > 1. Prior to commit 4d3e84f99628 ("clk: rockchip: describe aclk_vcodec > using the new muxgrf type on rk3288") we always pretended that we > were using "aclk_vdpu" and the comment in the code said that this > matched the default setting in the system. In fact the default > setting is 0 according to the TRM and according to reading memory > at bootup. In addition rk3288-based Chromebooks ran like this and > the video codecs worked. > 2. With the existing clock code if you boot up and try to enable the > new VIDEO_ROCKCHIP_VPU as a module (and without "clk_ignore_unused" > on the command line), you get errors like "failed to get ack on > domain 'pd_video', val=0x80208". After flipping vepu/vdpu things > init OK. > 3. If I export and add both the vepu and vdpu to the list of clocks > for RK3288_PD_VIDEO I can get past the power domain errors, but now > I freeze when the vpu_mmu gets initted. > 4. If I just mark the "vdpu" as IGNORE_UNUSED then everything boots up > and probes OK showing that somehow the "vdpu" was important to keep > enabled. This is because we were actually using it as a parent. > 5. After this change I can hack "aclk_vcodec_pre" to parent from > "aclk_vepu" using assigned-clocks and the video codec still probes > OK. > > Fixes: 4d3e84f99628 ("clk: rockchip: describe aclk_vcodec using the new muxgrf type on rk3288") > Signed-off-by: Douglas Anderson <dianders@chromium.org> > --- > I currently have no way to test the JPEG mem2mem driver, so hopefully > others can test this and make sure it's happy for them. I'm just > happy not to get strange errors at boot anymore. > I won't have access to this hardware for a few days, but I am happy to provide a simple test tool. Still haven't reviewed this, but thanks for chasing it down! EZe > drivers/clk/rockchip/clk-rk3288.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c > index 5a67b7869960..4d767f9c3a80 100644 > --- a/drivers/clk/rockchip/clk-rk3288.c > +++ b/drivers/clk/rockchip/clk-rk3288.c > @@ -219,7 +219,7 @@ PNAME(mux_hsadcout_p) = { "hsadc_src", "ext_hsadc" }; > PNAME(mux_edp_24m_p) = { "ext_edp_24m", "xin24m" }; > PNAME(mux_tspout_p) = { "cpll", "gpll", "npll", "xin27m" }; > > -PNAME(mux_aclk_vcodec_pre_p) = { "aclk_vepu", "aclk_vdpu" }; > +PNAME(mux_aclk_vcodec_pre_p) = { "aclk_vdpu", "aclk_vepu" }; > PNAME(mux_usbphy480m_p) = { "sclk_otgphy1_480m", "sclk_otgphy2_480m", > "sclk_otgphy0_480m" }; > PNAME(mux_hsicphy480m_p) = { "cpll", "gpll", "usbphy480m_src" }; > -- > 2.21.0.392.gf8f6787159e-goog >
On Fri, 29 Mar 2019 at 20:28, Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> wrote: > > On Fri, 29 Mar 2019 at 18:55, Douglas Anderson <dianders@chromium.org> wrote: > > > > It appears that there is a typo in the rk3288 TRM. For > > GRF_SOC_CON0[7] it says that 0 means "vepu" and 1 means "vdpu". It's > > the other way around. > > > > How do I know? Here's my evidence: > > > > 1. Prior to commit 4d3e84f99628 ("clk: rockchip: describe aclk_vcodec > > using the new muxgrf type on rk3288") we always pretended that we > > were using "aclk_vdpu" and the comment in the code said that this > > matched the default setting in the system. In fact the default > > setting is 0 according to the TRM and according to reading memory > > at bootup. In addition rk3288-based Chromebooks ran like this and > > the video codecs worked. > > 2. With the existing clock code if you boot up and try to enable the > > new VIDEO_ROCKCHIP_VPU as a module (and without "clk_ignore_unused" > > on the command line), you get errors like "failed to get ack on > > domain 'pd_video', val=0x80208". After flipping vepu/vdpu things > > init OK. > > 3. If I export and add both the vepu and vdpu to the list of clocks > > for RK3288_PD_VIDEO I can get past the power domain errors, but now > > I freeze when the vpu_mmu gets initted. > > 4. If I just mark the "vdpu" as IGNORE_UNUSED then everything boots up > > and probes OK showing that somehow the "vdpu" was important to keep > > enabled. This is because we were actually using it as a parent. > > 5. After this change I can hack "aclk_vcodec_pre" to parent from > > "aclk_vepu" using assigned-clocks and the video codec still probes > > OK. > > > > Fixes: 4d3e84f99628 ("clk: rockchip: describe aclk_vcodec using the new muxgrf type on rk3288") > > Signed-off-by: Douglas Anderson <dianders@chromium.org> > > --- > > I currently have no way to test the JPEG mem2mem driver, so hopefully > > others can test this and make sure it's happy for them. I'm just > > happy not to get strange errors at boot anymore. > > > > I won't have access to this hardware for a few days, but I am happy > to provide a simple test tool. > > Still haven't reviewed this, but thanks for chasing it down! > Here's a simple tool that tests JPEG encoding. There are two branches, with request API and without request API: https://gitlab.collabora.com/ezequiel/v4l-jpeg Usage is fairly simple, there's a test.sh that runs three tests, writing three JPEG images. You can also use v4l2jpegenc gstreamer element, but it's slightly more involved to set up. Hope it helps, Eze
Hi, On Sat, Mar 30, 2019 at 7:25 AM Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> wrote: > > On Fri, 29 Mar 2019 at 20:28, Ezequiel Garcia > <ezequiel@vanguardiasur.com.ar> wrote: > > > > On Fri, 29 Mar 2019 at 18:55, Douglas Anderson <dianders@chromium.org> wrote: > > > > > > It appears that there is a typo in the rk3288 TRM. For > > > GRF_SOC_CON0[7] it says that 0 means "vepu" and 1 means "vdpu". It's > > > the other way around. > > > > > > How do I know? Here's my evidence: > > > > > > 1. Prior to commit 4d3e84f99628 ("clk: rockchip: describe aclk_vcodec > > > using the new muxgrf type on rk3288") we always pretended that we > > > were using "aclk_vdpu" and the comment in the code said that this > > > matched the default setting in the system. In fact the default > > > setting is 0 according to the TRM and according to reading memory > > > at bootup. In addition rk3288-based Chromebooks ran like this and > > > the video codecs worked. > > > 2. With the existing clock code if you boot up and try to enable the > > > new VIDEO_ROCKCHIP_VPU as a module (and without "clk_ignore_unused" > > > on the command line), you get errors like "failed to get ack on > > > domain 'pd_video', val=0x80208". After flipping vepu/vdpu things > > > init OK. > > > 3. If I export and add both the vepu and vdpu to the list of clocks > > > for RK3288_PD_VIDEO I can get past the power domain errors, but now > > > I freeze when the vpu_mmu gets initted. > > > 4. If I just mark the "vdpu" as IGNORE_UNUSED then everything boots up > > > and probes OK showing that somehow the "vdpu" was important to keep > > > enabled. This is because we were actually using it as a parent. > > > 5. After this change I can hack "aclk_vcodec_pre" to parent from > > > "aclk_vepu" using assigned-clocks and the video codec still probes > > > OK. > > > > > > Fixes: 4d3e84f99628 ("clk: rockchip: describe aclk_vcodec using the new muxgrf type on rk3288") > > > Signed-off-by: Douglas Anderson <dianders@chromium.org> > > > --- > > > I currently have no way to test the JPEG mem2mem driver, so hopefully > > > others can test this and make sure it's happy for them. I'm just > > > happy not to get strange errors at boot anymore. > > > > > > > I won't have access to this hardware for a few days, but I am happy > > to provide a simple test tool. > > > > Still haven't reviewed this, but thanks for chasing it down! > > > > Here's a simple tool that tests JPEG encoding. There are two branches, > with request API and without request API: > > https://gitlab.collabora.com/ezequiel/v4l-jpeg > > Usage is fairly simple, there's a test.sh that runs three tests, > writing three JPEG images. Didn't work for me. I got: unable to allocate media request 25 === OK, after a bunch of debugging, I realized that I needed your series from <https://patchwork.kernel.org/cover/10838323/>. I applied that together with my patch to the to of Heiko's current for-next tree and I see: destination plane sizeimage 76800 bytes source plane 0 sizeimage 76800 bytes source plane 1 sizeimage 19200 bytes source plane 2 sizeimage 19200 bytes src plane 0 mapped 76800 bytes src plane 1 mapped 19200 bytes src plane 2 mapped 19200 bytes capture buffer size: 76800 capture bytes: 6385 bars-i420-320_240.jpeg written, 6385 bytes destination plane sizeimage 76800 bytes source plane 0 sizeimage 76800 bytes source plane 1 sizeimage 38400 bytes src plane 0 mapped 76800 bytes src plane 1 mapped 38400 bytes capture buffer size: 76800 capture bytes: 6385 bars-nv12-320_240.jpeg written, 6385 bytes destination plane sizeimage 76800 bytes source plane 0 sizeimage 153600 bytes src plane 0 mapped 153600 bytes capture buffer size: 76800 capture bytes: 6385 bars-yuy2-320_240.jpeg written, 6385 bytes -Doug
Hi, On Fri, Mar 29, 2019 at 2:55 PM Douglas Anderson <dianders@chromium.org> wrote: > > It appears that there is a typo in the rk3288 TRM. For > GRF_SOC_CON0[7] it says that 0 means "vepu" and 1 means "vdpu". It's > the other way around. > > How do I know? Here's my evidence: > > 1. Prior to commit 4d3e84f99628 ("clk: rockchip: describe aclk_vcodec > using the new muxgrf type on rk3288") we always pretended that we > were using "aclk_vdpu" and the comment in the code said that this > matched the default setting in the system. In fact the default > setting is 0 according to the TRM and according to reading memory > at bootup. In addition rk3288-based Chromebooks ran like this and > the video codecs worked. > 2. With the existing clock code if you boot up and try to enable the > new VIDEO_ROCKCHIP_VPU as a module (and without "clk_ignore_unused" > on the command line), you get errors like "failed to get ack on > domain 'pd_video', val=0x80208". After flipping vepu/vdpu things > init OK. > 3. If I export and add both the vepu and vdpu to the list of clocks > for RK3288_PD_VIDEO I can get past the power domain errors, but now > I freeze when the vpu_mmu gets initted. > 4. If I just mark the "vdpu" as IGNORE_UNUSED then everything boots up > and probes OK showing that somehow the "vdpu" was important to keep > enabled. This is because we were actually using it as a parent. > 5. After this change I can hack "aclk_vcodec_pre" to parent from > "aclk_vepu" using assigned-clocks and the video codec still probes > OK. > > Fixes: 4d3e84f99628 ("clk: rockchip: describe aclk_vcodec using the new muxgrf type on rk3288") > Signed-off-by: Douglas Anderson <dianders@chromium.org> > --- > I currently have no way to test the JPEG mem2mem driver, so hopefully > others can test this and make sure it's happy for them. I'm just > happy not to get strange errors at boot anymore. > > drivers/clk/rockchip/clk-rk3288.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) Any thoughts about this patch? I'm 99.9% certain it's correct and it'd be nice to get it landed. Heiko: I assume you're still collecting Rockchip clock patches and would be the one to apply it and (at some point) send a pull request to the clock tree? -Doug
On 2019-04-10 17:45, Doug Anderson wrote: > Hi, > > On Fri, Mar 29, 2019 at 2:55 PM Douglas Anderson <dianders@chromium.org> wrote: >> It appears that there is a typo in the rk3288 TRM. For >> GRF_SOC_CON0[7] it says that 0 means "vepu" and 1 means "vdpu". It's >> the other way around. >> >> How do I know? Here's my evidence: >> >> 1. Prior to commit 4d3e84f99628 ("clk: rockchip: describe aclk_vcodec >> using the new muxgrf type on rk3288") we always pretended that we >> were using "aclk_vdpu" and the comment in the code said that this >> matched the default setting in the system. In fact the default >> setting is 0 according to the TRM and according to reading memory >> at bootup. In addition rk3288-based Chromebooks ran like this and >> the video codecs worked. >> 2. With the existing clock code if you boot up and try to enable the >> new VIDEO_ROCKCHIP_VPU as a module (and without "clk_ignore_unused" >> on the command line), you get errors like "failed to get ack on >> domain 'pd_video', val=0x80208". After flipping vepu/vdpu things >> init OK. >> 3. If I export and add both the vepu and vdpu to the list of clocks >> for RK3288_PD_VIDEO I can get past the power domain errors, but now >> I freeze when the vpu_mmu gets initted. >> 4. If I just mark the "vdpu" as IGNORE_UNUSED then everything boots up >> and probes OK showing that somehow the "vdpu" was important to keep >> enabled. This is because we were actually using it as a parent. >> 5. After this change I can hack "aclk_vcodec_pre" to parent from >> "aclk_vepu" using assigned-clocks and the video codec still probes >> OK. >> >> Fixes: 4d3e84f99628 ("clk: rockchip: describe aclk_vcodec using the new muxgrf type on rk3288") >> Signed-off-by: Douglas Anderson <dianders@chromium.org> >> --- >> I currently have no way to test the JPEG mem2mem driver, so hopefully >> others can test this and make sure it's happy for them. I'm just >> happy not to get strange errors at boot anymore. >> >> drivers/clk/rockchip/clk-rk3288.c | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) > Any thoughts about this patch? I'm 99.9% certain it's correct and > it'd be nice to get it landed. Heiko: I assume you're still > collecting Rockchip clock patches and would be the one to apply it and > (at some point) send a pull request to the clock tree? > > -Doug This clk fix is needed to make MPEG-2 decoding work on my RK3288 Tinker Board using the rockchip vpu patchset and a patch to add RK3288 specific MPEG-2 code [1]. Also note that the same change was suggested in a previous patch [2] from by ayaka. If possible please also add the CLK_SET_RATE_PARENT change from [3] in a possible v2, that fixes assigning the aclk_vcodec clk to 400Mhz in the rockchip vpu driver. [1] https://github.com/Kwiboo/linux-rockchip/commit/1f78093e05c7360515a185f48b7c5cb8ba1e3e15 [2] https://patchwork.kernel.org/patch/9725553/ [3] https://github.com/Kwiboo/linux-rockchip/commit/9216da3f1521a0be5889235abe7fa093a4894160 Regards, Jonas
Hi, On Wed, Apr 10, 2019 at 11:38 AM Jonas Karlman <jonas@kwiboo.se> wrote: > > On 2019-04-10 17:45, Doug Anderson wrote: > > Hi, > > > > On Fri, Mar 29, 2019 at 2:55 PM Douglas Anderson <dianders@chromium.org> wrote: > >> It appears that there is a typo in the rk3288 TRM. For > >> GRF_SOC_CON0[7] it says that 0 means "vepu" and 1 means "vdpu". It's > >> the other way around. > >> > >> How do I know? Here's my evidence: > >> > >> 1. Prior to commit 4d3e84f99628 ("clk: rockchip: describe aclk_vcodec > >> using the new muxgrf type on rk3288") we always pretended that we > >> were using "aclk_vdpu" and the comment in the code said that this > >> matched the default setting in the system. In fact the default > >> setting is 0 according to the TRM and according to reading memory > >> at bootup. In addition rk3288-based Chromebooks ran like this and > >> the video codecs worked. > >> 2. With the existing clock code if you boot up and try to enable the > >> new VIDEO_ROCKCHIP_VPU as a module (and without "clk_ignore_unused" > >> on the command line), you get errors like "failed to get ack on > >> domain 'pd_video', val=0x80208". After flipping vepu/vdpu things > >> init OK. > >> 3. If I export and add both the vepu and vdpu to the list of clocks > >> for RK3288_PD_VIDEO I can get past the power domain errors, but now > >> I freeze when the vpu_mmu gets initted. > >> 4. If I just mark the "vdpu" as IGNORE_UNUSED then everything boots up > >> and probes OK showing that somehow the "vdpu" was important to keep > >> enabled. This is because we were actually using it as a parent. > >> 5. After this change I can hack "aclk_vcodec_pre" to parent from > >> "aclk_vepu" using assigned-clocks and the video codec still probes > >> OK. > >> > >> Fixes: 4d3e84f99628 ("clk: rockchip: describe aclk_vcodec using the new muxgrf type on rk3288") > >> Signed-off-by: Douglas Anderson <dianders@chromium.org> > >> --- > >> I currently have no way to test the JPEG mem2mem driver, so hopefully > >> others can test this and make sure it's happy for them. I'm just > >> happy not to get strange errors at boot anymore. > >> > >> drivers/clk/rockchip/clk-rk3288.c | 2 +- > >> 1 file changed, 1 insertion(+), 1 deletion(-) > > Any thoughts about this patch? I'm 99.9% certain it's correct and > > it'd be nice to get it landed. Heiko: I assume you're still > > collecting Rockchip clock patches and would be the one to apply it and > > (at some point) send a pull request to the clock tree? > > > > -Doug > > This clk fix is needed to make MPEG-2 decoding work on my RK3288 Tinker Board using the > rockchip vpu patchset and a patch to add RK3288 specific MPEG-2 code [1]. > > Also note that the same change was suggested in a previous patch [2] from by ayaka. > > If possible please also add the CLK_SET_RATE_PARENT change from [3] in a possible v2, > that fixes assigning the aclk_vcodec clk to 400Mhz in the rockchip vpu driver. > > [1] https://github.com/Kwiboo/linux-rockchip/commit/1f78093e05c7360515a185f48b7c5cb8ba1e3e15 > [2] https://patchwork.kernel.org/patch/9725553/ > [3] https://github.com/Kwiboo/linux-rockchip/commit/9216da3f1521a0be5889235abe7fa093a4894160 Thanks for the pointers! Now I'm 99.9999% certain that my patch is correct instead of just 99.9%. ;-) IMO the CLK_SET_RATE_PARENT should probably be a separate patch but it does seem like we need it. ...and actually the patch adding it should have a Fixes tag of the same commit. Prior to that commit the parent of "aclk_vcodec" was "aclk_vdpu". As a gate clock it would automatically have CLK_SET_RATE_PARENT so you could easily set the rate. ...and it looks as if the downstream video codec driver in Chrome OS relies on this too. I'm happy to add that in a v2 if Heiko is happy with it. -Doug
hi, 在 2019/4/11 上午7:37, Doug Anderson 写道: > Hi, > > On Wed, Apr 10, 2019 at 11:38 AM Jonas Karlman <jonas@kwiboo.se> wrote: >> On 2019-04-10 17:45, Doug Anderson wrote: >>> Hi, >>> >>> On Fri, Mar 29, 2019 at 2:55 PM Douglas Anderson <dianders@chromium.org> wrote: >>>> It appears that there is a typo in the rk3288 TRM. For >>>> GRF_SOC_CON0[7] it says that 0 means "vepu" and 1 means "vdpu". It's >>>> the other way around. >>>> >>>> How do I know? Here's my evidence: >>>> >>>> 1. Prior to commit 4d3e84f99628 ("clk: rockchip: describe aclk_vcodec >>>> using the new muxgrf type on rk3288") we always pretended that we >>>> were using "aclk_vdpu" and the comment in the code said that this >>>> matched the default setting in the system. In fact the default >>>> setting is 0 according to the TRM and according to reading memory >>>> at bootup. In addition rk3288-based Chromebooks ran like this and >>>> the video codecs worked. >>>> 2. With the existing clock code if you boot up and try to enable the >>>> new VIDEO_ROCKCHIP_VPU as a module (and without "clk_ignore_unused" >>>> on the command line), you get errors like "failed to get ack on >>>> domain 'pd_video', val=0x80208". After flipping vepu/vdpu things >>>> init OK. >>>> 3. If I export and add both the vepu and vdpu to the list of clocks >>>> for RK3288_PD_VIDEO I can get past the power domain errors, but now >>>> I freeze when the vpu_mmu gets initted. >>>> 4. If I just mark the "vdpu" as IGNORE_UNUSED then everything boots up >>>> and probes OK showing that somehow the "vdpu" was important to keep >>>> enabled. This is because we were actually using it as a parent. >>>> 5. After this change I can hack "aclk_vcodec_pre" to parent from >>>> "aclk_vepu" using assigned-clocks and the video codec still probes >>>> OK. >>>> >>>> Fixes: 4d3e84f99628 ("clk: rockchip: describe aclk_vcodec using the new muxgrf type on rk3288") >>>> Signed-off-by: Douglas Anderson <dianders@chromium.org> >>>> --- >>>> I currently have no way to test the JPEG mem2mem driver, so hopefully >>>> others can test this and make sure it's happy for them. I'm just >>>> happy not to get strange errors at boot anymore. >>>> >>>> drivers/clk/rockchip/clk-rk3288.c | 2 +- >>>> 1 file changed, 1 insertion(+), 1 deletion(-) >>> Any thoughts about this patch? I'm 99.9% certain it's correct and >>> it'd be nice to get it landed. Heiko: I assume you're still >>> collecting Rockchip clock patches and would be the one to apply it and >>> (at some point) send a pull request to the clock tree? >>> >>> -Doug >> This clk fix is needed to make MPEG-2 decoding work on my RK3288 Tinker Board using the >> rockchip vpu patchset and a patch to add RK3288 specific MPEG-2 code [1]. >> >> Also note that the same change was suggested in a previous patch [2] from by ayaka. >> >> If possible please also add the CLK_SET_RATE_PARENT change from [3] in a possible v2, >> that fixes assigning the aclk_vcodec clk to 400Mhz in the rockchip vpu driver. >> >> [1] https://github.com/Kwiboo/linux-rockchip/commit/1f78093e05c7360515a185f48b7c5cb8ba1e3e15 >> [2] https://patchwork.kernel.org/patch/9725553/ >> [3] https://github.com/Kwiboo/linux-rockchip/commit/9216da3f1521a0be5889235abe7fa093a4894160 > Thanks for the pointers! Now I'm 99.9999% certain that my patch is > correct instead of just 99.9%. ;-) > > IMO the CLK_SET_RATE_PARENT should probably be a separate patch but it > does seem like we need it. ...and actually the patch adding it should > have a Fixes tag of the same commit. Prior to that commit the parent > of "aclk_vcodec" was "aclk_vdpu". As a gate clock it would > automatically have CLK_SET_RATE_PARENT so you could easily set the > rate. ...and it looks as if the downstream video codec driver in > Chrome OS relies on this too. > > I'm happy to add that in a v2 if Heiko is happy with it. I also agree with this modification, which is completely correct. Thank you for your modification. (We didn't push for this change because the GRF_SOC_CON0[7] is setting in vcodec driver(RK mainline branch)) > > -Doug > > >
Hi Doug, Am Donnerstag, 11. April 2019, 01:37:33 CEST schrieb Doug Anderson: > Hi, > > On Wed, Apr 10, 2019 at 11:38 AM Jonas Karlman <jonas@kwiboo.se> wrote: > > > > On 2019-04-10 17:45, Doug Anderson wrote: > > > Hi, > > > > > > On Fri, Mar 29, 2019 at 2:55 PM Douglas Anderson <dianders@chromium.org> wrote: > > >> It appears that there is a typo in the rk3288 TRM. For > > >> GRF_SOC_CON0[7] it says that 0 means "vepu" and 1 means "vdpu". It's > > >> the other way around. > > >> > > >> How do I know? Here's my evidence: > > >> > > >> 1. Prior to commit 4d3e84f99628 ("clk: rockchip: describe aclk_vcodec > > >> using the new muxgrf type on rk3288") we always pretended that we > > >> were using "aclk_vdpu" and the comment in the code said that this > > >> matched the default setting in the system. In fact the default > > >> setting is 0 according to the TRM and according to reading memory > > >> at bootup. In addition rk3288-based Chromebooks ran like this and > > >> the video codecs worked. > > >> 2. With the existing clock code if you boot up and try to enable the > > >> new VIDEO_ROCKCHIP_VPU as a module (and without "clk_ignore_unused" > > >> on the command line), you get errors like "failed to get ack on > > >> domain 'pd_video', val=0x80208". After flipping vepu/vdpu things > > >> init OK. > > >> 3. If I export and add both the vepu and vdpu to the list of clocks > > >> for RK3288_PD_VIDEO I can get past the power domain errors, but now > > >> I freeze when the vpu_mmu gets initted. > > >> 4. If I just mark the "vdpu" as IGNORE_UNUSED then everything boots up > > >> and probes OK showing that somehow the "vdpu" was important to keep > > >> enabled. This is because we were actually using it as a parent. > > >> 5. After this change I can hack "aclk_vcodec_pre" to parent from > > >> "aclk_vepu" using assigned-clocks and the video codec still probes > > >> OK. > > >> > > >> Fixes: 4d3e84f99628 ("clk: rockchip: describe aclk_vcodec using the new muxgrf type on rk3288") > > >> Signed-off-by: Douglas Anderson <dianders@chromium.org> > > >> --- > > >> I currently have no way to test the JPEG mem2mem driver, so hopefully > > >> others can test this and make sure it's happy for them. I'm just > > >> happy not to get strange errors at boot anymore. > > >> > > >> drivers/clk/rockchip/clk-rk3288.c | 2 +- > > >> 1 file changed, 1 insertion(+), 1 deletion(-) > > > Any thoughts about this patch? I'm 99.9% certain it's correct and > > > it'd be nice to get it landed. Heiko: I assume you're still > > > collecting Rockchip clock patches and would be the one to apply it and > > > (at some point) send a pull request to the clock tree? > > > > > > -Doug > > > > This clk fix is needed to make MPEG-2 decoding work on my RK3288 Tinker Board using the > > rockchip vpu patchset and a patch to add RK3288 specific MPEG-2 code [1]. > > > > Also note that the same change was suggested in a previous patch [2] from by ayaka. > > > > If possible please also add the CLK_SET_RATE_PARENT change from [3] in a possible v2, > > that fixes assigning the aclk_vcodec clk to 400Mhz in the rockchip vpu driver. > > > > [1] https://github.com/Kwiboo/linux-rockchip/commit/1f78093e05c7360515a185f48b7c5cb8ba1e3e15 > > [2] https://patchwork.kernel.org/patch/9725553/ > > [3] https://github.com/Kwiboo/linux-rockchip/commit/9216da3f1521a0be5889235abe7fa093a4894160 > > Thanks for the pointers! Now I'm 99.9999% certain that my patch is > correct instead of just 99.9%. ;-) > > IMO the CLK_SET_RATE_PARENT should probably be a separate patch but it > does seem like we need it. ...and actually the patch adding it should > have a Fixes tag of the same commit. Prior to that commit the parent > of "aclk_vcodec" was "aclk_vdpu". As a gate clock it would > automatically have CLK_SET_RATE_PARENT so you could easily set the > rate. ...and it looks as if the downstream video codec driver in > Chrome OS relies on this too. > > I'm happy to add that in a v2 if Heiko is happy with it. Sounds very sensible to me to combine these 2 parts. Heiko
diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c index 5a67b7869960..4d767f9c3a80 100644 --- a/drivers/clk/rockchip/clk-rk3288.c +++ b/drivers/clk/rockchip/clk-rk3288.c @@ -219,7 +219,7 @@ PNAME(mux_hsadcout_p) = { "hsadc_src", "ext_hsadc" }; PNAME(mux_edp_24m_p) = { "ext_edp_24m", "xin24m" }; PNAME(mux_tspout_p) = { "cpll", "gpll", "npll", "xin27m" }; -PNAME(mux_aclk_vcodec_pre_p) = { "aclk_vepu", "aclk_vdpu" }; +PNAME(mux_aclk_vcodec_pre_p) = { "aclk_vdpu", "aclk_vepu" }; PNAME(mux_usbphy480m_p) = { "sclk_otgphy1_480m", "sclk_otgphy2_480m", "sclk_otgphy0_480m" }; PNAME(mux_hsicphy480m_p) = { "cpll", "gpll", "usbphy480m_src" };
It appears that there is a typo in the rk3288 TRM. For GRF_SOC_CON0[7] it says that 0 means "vepu" and 1 means "vdpu". It's the other way around. How do I know? Here's my evidence: 1. Prior to commit 4d3e84f99628 ("clk: rockchip: describe aclk_vcodec using the new muxgrf type on rk3288") we always pretended that we were using "aclk_vdpu" and the comment in the code said that this matched the default setting in the system. In fact the default setting is 0 according to the TRM and according to reading memory at bootup. In addition rk3288-based Chromebooks ran like this and the video codecs worked. 2. With the existing clock code if you boot up and try to enable the new VIDEO_ROCKCHIP_VPU as a module (and without "clk_ignore_unused" on the command line), you get errors like "failed to get ack on domain 'pd_video', val=0x80208". After flipping vepu/vdpu things init OK. 3. If I export and add both the vepu and vdpu to the list of clocks for RK3288_PD_VIDEO I can get past the power domain errors, but now I freeze when the vpu_mmu gets initted. 4. If I just mark the "vdpu" as IGNORE_UNUSED then everything boots up and probes OK showing that somehow the "vdpu" was important to keep enabled. This is because we were actually using it as a parent. 5. After this change I can hack "aclk_vcodec_pre" to parent from "aclk_vepu" using assigned-clocks and the video codec still probes OK. Fixes: 4d3e84f99628 ("clk: rockchip: describe aclk_vcodec using the new muxgrf type on rk3288") Signed-off-by: Douglas Anderson <dianders@chromium.org> --- I currently have no way to test the JPEG mem2mem driver, so hopefully others can test this and make sure it's happy for them. I'm just happy not to get strange errors at boot anymore. drivers/clk/rockchip/clk-rk3288.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)