diff mbox series

[net-next] net: phy: switch drivers to use dynamic feature detection

Message ID 0cc96fab-e102-c0d1-ade0-90e3e06dc9f1@gmail.com (mailing list archive)
State Superseded
Headers show
Series [net-next] net: phy: switch drivers to use dynamic feature detection | expand

Commit Message

Heiner Kallweit April 7, 2019, 9:57 a.m. UTC 
Recently genphy_read_abilities() has been added that dynamically detects
clause 22 PHY abilities. I *think* this detection should work with all
supported PHY's, at least for the ones with basic features sets, i.e.
PHY_BASIC_FEATURES and PHY_GBIT_FEATURES. So let's remove setting these
features explicitly and rely on phylib feature detection.

I don't have access to most of these PHY's, therefore I'd appreciate
regression testing.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
 drivers/net/phy/amd.c        |  1 -
 drivers/net/phy/asix.c       |  1 -
 drivers/net/phy/at803x.c     |  3 ---
 drivers/net/phy/bcm-cygnus.c |  2 --
 drivers/net/phy/bcm63xx.c    |  2 --
 drivers/net/phy/bcm7xxx.c    |  3 ---
 drivers/net/phy/broadcom.c   | 17 -----------------
 drivers/net/phy/cicada.c     |  2 --
 drivers/net/phy/davicom.c    |  4 ----
 drivers/net/phy/dp83640.c    |  1 -
 drivers/net/phy/dp83822.c    |  1 -
 drivers/net/phy/dp83848.c    |  1 -
 drivers/net/phy/dp83867.c    |  1 -
 drivers/net/phy/dp83tc811.c  |  1 -
 drivers/net/phy/et1011c.c    |  1 -
 drivers/net/phy/icplus.c     |  3 ---
 drivers/net/phy/intel-xway.c | 10 ----------
 drivers/net/phy/lxt.c        |  4 ----
 drivers/net/phy/marvell.c    | 14 --------------
 drivers/net/phy/meson-gxl.c  |  2 --
 drivers/net/phy/micrel.c     | 16 ----------------
 drivers/net/phy/microchip.c  |  2 --
 drivers/net/phy/mscc.c       |  6 ------
 drivers/net/phy/national.c   |  1 -
 drivers/net/phy/qsemi.c      |  1 -
 drivers/net/phy/rockchip.c   |  1 -
 drivers/net/phy/smsc.c       | 11 -----------
 drivers/net/phy/ste10Xp.c    |  2 --
 drivers/net/phy/uPD60620.c   |  1 -
 drivers/net/phy/vitesse.c    | 12 ------------
 30 files changed, 127 deletions(-)

Comments

Florian Fainelli April 7, 2019, 8:31 p.m. UTC | #1 
On 4/7/2019 2:57 AM, Heiner Kallweit wrote:
> Recently genphy_read_abilities() has been added that dynamically detects
> clause 22 PHY abilities. I *think* this detection should work with all
> supported PHY's, at least for the ones with basic features sets, i.e.
> PHY_BASIC_FEATURES and PHY_GBIT_FEATURES. So let's remove setting these
> features explicitly and rely on phylib feature detection.
> 
> I don't have access to most of these PHY's, therefore I'd appreciate
> regression testing.

The nice thing about the features is that we can right away tell which
PHY entries are Fast Ethernet/Gigabit etc... so if you remove that
assignment, we would need at least a standardized comment allowing us to
quickly grep for that information.
Heiner Kallweit April 7, 2019, 8:48 p.m. UTC | #2 
On 07.04.2019 22:31, Florian Fainelli wrote:
> 
> 
> On 4/7/2019 2:57 AM, Heiner Kallweit wrote:
>> Recently genphy_read_abilities() has been added that dynamically detects
>> clause 22 PHY abilities. I *think* this detection should work with all
>> supported PHY's, at least for the ones with basic features sets, i.e.
>> PHY_BASIC_FEATURES and PHY_GBIT_FEATURES. So let's remove setting these
>> features explicitly and rely on phylib feature detection.
>>
>> I don't have access to most of these PHY's, therefore I'd appreciate
>> regression testing.
> 
> The nice thing about the features is that we can right away tell which
> PHY entries are Fast Ethernet/Gigabit etc... so if you remove that
> assignment, we would need at least a standardized comment allowing us to
> quickly grep for that information.
> 
Yes, that gets lost. Well, in a lot (most?) of cases you still have it in
the name. But who needs this information what for? At runtime e.g. ethtool
tells what's supported. And for all PHY's w/o dedicated driver that are
using the genphy driver you don't know anyway.
For c45 PHY's this would become even more tricky as they can support much
more speeds.
Andrew Lunn April 7, 2019, 10:13 p.m. UTC | #3 
On Sun, Apr 07, 2019 at 11:57:13AM +0200, Heiner Kallweit wrote:
> Recently genphy_read_abilities() has been added that dynamically detects
> clause 22 PHY abilities. I *think* this detection should work with all
> supported PHY's, at least for the ones with basic features sets, i.e.
> PHY_BASIC_FEATURES and PHY_GBIT_FEATURES. So let's remove setting these
> features explicitly and rely on phylib feature detection.

Hi Heiner

We could make this a two step process, to avoid regressions. For one
cycle compare genphy_read_abilities() against .features and raise a
WARN_ON() if they differ. And keep using the .features value.

Then a release late, complete the swap removing .features and the
WARN_ON.

	Andrew
Richard Cochran April 8, 2019, 2:38 a.m. UTC | #4 
On Sun, Apr 07, 2019 at 11:57:13AM +0200, Heiner Kallweit wrote:
> Recently genphy_read_abilities() has been added that dynamically detects
> clause 22 PHY abilities. I *think* this detection should work with all

Famous last words!

> supported PHY's, at least for the ones with basic features sets, i.e.
> PHY_BASIC_FEATURES and PHY_GBIT_FEATURES. So let's remove setting these
> features explicitly and rely on phylib feature detection.
> 
> I don't have access to most of these PHY's, therefore I'd appreciate
> regression testing.

How about testing first, then merging?  I suggest breaking this out
into individual patches that can be Tested-by.

Thanks,
Richard
Heiner Kallweit April 8, 2019, 5:45 p.m. UTC | #5 
On 08.04.2019 00:13, Andrew Lunn wrote:
> On Sun, Apr 07, 2019 at 11:57:13AM +0200, Heiner Kallweit wrote:
>> Recently genphy_read_abilities() has been added that dynamically detects
>> clause 22 PHY abilities. I *think* this detection should work with all
>> supported PHY's, at least for the ones with basic features sets, i.e.
>> PHY_BASIC_FEATURES and PHY_GBIT_FEATURES. So let's remove setting these
>> features explicitly and rely on phylib feature detection.
> 
> Hi Heiner
> 
Hi Andrew,

> We could make this a two step process, to avoid regressions. For one
> cycle compare genphy_read_abilities() against .features and raise a
> WARN_ON() if they differ. And keep using the .features value.
> 
in general this is a good idea. I say in general because this would fail
with several, if not most GBit PHY's. Reason is that the hardcoded
features currently pretend we're supporting 1000BT/Half, whilst several
PHY's don't support this mode. 1000BT/Half has been specified but never
really been used. If we see it from this angle, the series is actually
a fix. The feature detection uses very basic C22 registers/bits,
therefore I consider the risk of breaking something to be relatively low.
And just in case we have the rc phase to fix support for a broken PHY.

Splitting the series and waiting for a Tested-by, as proposed by Richard,
may be problematic because most PHY drivers don't have a dedicated
maintainer, and we lack the hardware to test.

> Then a release late, complete the swap removing .features and the
> WARN_ON.
> 
> 	Andrew
> .
> 
Heiner
Andrew Lunn April 8, 2019, 6:12 p.m. UTC | #6 
> Splitting the series and waiting for a Tested-by, as proposed by Richard,
> may be problematic because most PHY drivers don't have a dedicated
> maintainer, and we lack the hardware to test.

Well, we could split out those we know are likely to get tested.  I
have a number of boards with Marvell devices i can test. Florian has
Broadcom boards. I also have a couple of boards with Micrel KSZ8041,
which would be interesting because they are Fast Ethernet. Bootlin can
test some of the mscc PHYs.

We also might want to get some targeted testing. The microchip_t1.c
could be interesting, since it is a T1 device. There was another T1
added in the last year, but i forget which.

Just doing this testing might give us an idea if we really should
expect problems.

      Andrew
Heiner Kallweit April 8, 2019, 6:45 p.m. UTC | #7 
On 08.04.2019 20:12, Andrew Lunn wrote:
>> Splitting the series and waiting for a Tested-by, as proposed by Richard,
>> may be problematic because most PHY drivers don't have a dedicated
>> maintainer, and we lack the hardware to test.
> 
> Well, we could split out those we know are likely to get tested.  I
> have a number of boards with Marvell devices i can test. Florian has
> Broadcom boards. I also have a couple of boards with Micrel KSZ8041,
> which would be interesting because they are Fast Ethernet. Bootlin can
> test some of the mscc PHYs.
> 
Great. Could you also test based on the series and the provide a
Tested-by for the PHY's which have been tested? Even if I split out
let's say the Marvell PHY driver, most likely just few of all the
supported Marvell PHY's can be tested.

> We also might want to get some targeted testing. The microchip_t1.c
> could be interesting, since it is a T1 device. There was another T1
> added in the last year, but i forget which.
> 
The T1 PHY driver isn't included in this series. It uses another
feature constant: PHY_BASIC_T1_FEATURES

> Just doing this testing might give us an idea if we really should
> expect problems.
> 
Sure. I tested and applied this change to the Realtek PHY driver
already.

>       Andrew
> 
Heiner
David Miller April 9, 2019, 8:59 p.m. UTC | #8 
From: Heiner Kallweit <hkallweit1@gmail.com>
Date: Sun, 7 Apr 2019 11:57:13 +0200

> Recently genphy_read_abilities() has been added that dynamically detects
> clause 22 PHY abilities. I *think* this detection should work with all
> supported PHY's, at least for the ones with basic features sets, i.e.
> PHY_BASIC_FEATURES and PHY_GBIT_FEATURES. So let's remove setting these
> features explicitly and rely on phylib feature detection.
> 
> I don't have access to most of these PHY's, therefore I'd appreciate
> regression testing.
> 
> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

This appears to need to be done differently.

A question was asked as to why fast ethernet PHY identification from the
source is important, well I'd say it's important for someone working on
the PHY code to see how "all fast ethernet PHY drivers do or handle X"

:-)
Heiner Kallweit April 10, 2019, 7:31 p.m. UTC | #9 
On 09.04.2019 22:59, David Miller wrote:
> From: Heiner Kallweit <hkallweit1@gmail.com>
> Date: Sun, 7 Apr 2019 11:57:13 +0200
> 
>> Recently genphy_read_abilities() has been added that dynamically detects
>> clause 22 PHY abilities. I *think* this detection should work with all
>> supported PHY's, at least for the ones with basic features sets, i.e.
>> PHY_BASIC_FEATURES and PHY_GBIT_FEATURES. So let's remove setting these
>> features explicitly and rely on phylib feature detection.
>>
>> I don't have access to most of these PHY's, therefore I'd appreciate
>> regression testing.
>>
>> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
> 
> This appears to need to be done differently.
> 
> A question was asked as to why fast ethernet PHY identification from the
> source is important, well I'd say it's important for someone working on
> the PHY code to see how "all fast ethernet PHY drivers do or handle X"
> 
Then, what we could do: Change all occurrences of
.features = PHY_XXX_FEATURES
to
/* PHY_XXX_FEATURES */

Would this be an acceptable option?

> :-)
>
Florian Fainelli April 10, 2019, 7:33 p.m. UTC | #10 
On 4/10/2019 12:31 PM, Heiner Kallweit wrote:
> On 09.04.2019 22:59, David Miller wrote:
>> From: Heiner Kallweit <hkallweit1@gmail.com>
>> Date: Sun, 7 Apr 2019 11:57:13 +0200
>>
>>> Recently genphy_read_abilities() has been added that dynamically detects
>>> clause 22 PHY abilities. I *think* this detection should work with all
>>> supported PHY's, at least for the ones with basic features sets, i.e.
>>> PHY_BASIC_FEATURES and PHY_GBIT_FEATURES. So let's remove setting these
>>> features explicitly and rely on phylib feature detection.
>>>
>>> I don't have access to most of these PHY's, therefore I'd appreciate
>>> regression testing.
>>>
>>> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
>>
>> This appears to need to be done differently.
>>
>> A question was asked as to why fast ethernet PHY identification from the
>> source is important, well I'd say it's important for someone working on
>> the PHY code to see how "all fast ethernet PHY drivers do or handle X"
>>
> Then, what we could do: Change all occurrences of
> .features = PHY_XXX_FEATURES
> to
> /* PHY_XXX_FEATURES */
> 
> Would this be an acceptable option?

Yes absolutely, I was not thinking about anything more complicated than
that, should have made it more obvious in my replies. Thanks!
diff mbox series

Patch

diff --git a/drivers/net/phy/amd.c b/drivers/net/phy/amd.c
index 65b4b0960..c2948e4d2 100644
--- a/drivers/net/phy/amd.c
+++ b/drivers/net/phy/amd.c
@@ -60,7 +60,6 @@  static struct phy_driver am79c_driver[] = { {
 	.phy_id		= PHY_ID_AM79C874,
 	.name		= "AM79C874",
 	.phy_id_mask	= 0xfffffff0,
-	.features	= PHY_BASIC_FEATURES,
 	.config_init	= am79c_config_init,
 	.ack_interrupt	= am79c_ack_interrupt,
 	.config_intr	= am79c_config_intr,
diff --git a/drivers/net/phy/asix.c b/drivers/net/phy/asix.c
index f14ba5366..53b408b95 100644
--- a/drivers/net/phy/asix.c
+++ b/drivers/net/phy/asix.c
@@ -43,7 +43,6 @@  static struct phy_driver asix_driver[] = { {
 	.phy_id		= PHY_ID_ASIX_AX88796B,
 	.name		= "Asix Electronics AX88796B",
 	.phy_id_mask	= 0xfffffff0,
-	.features	= PHY_BASIC_FEATURES,
 	.soft_reset	= asix_soft_reset,
 } };
 
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index f315ab468..23276816e 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -389,7 +389,6 @@  static struct phy_driver at803x_driver[] = {
 	.get_wol		= at803x_get_wol,
 	.suspend		= at803x_suspend,
 	.resume			= at803x_resume,
-	.features		= PHY_GBIT_FEATURES,
 	.ack_interrupt		= at803x_ack_interrupt,
 	.config_intr		= at803x_config_intr,
 }, {
@@ -404,7 +403,6 @@  static struct phy_driver at803x_driver[] = {
 	.get_wol		= at803x_get_wol,
 	.suspend		= at803x_suspend,
 	.resume			= at803x_resume,
-	.features		= PHY_BASIC_FEATURES,
 	.ack_interrupt		= at803x_ack_interrupt,
 	.config_intr		= at803x_config_intr,
 }, {
@@ -418,7 +416,6 @@  static struct phy_driver at803x_driver[] = {
 	.get_wol		= at803x_get_wol,
 	.suspend		= at803x_suspend,
 	.resume			= at803x_resume,
-	.features		= PHY_GBIT_FEATURES,
 	.aneg_done		= at803x_aneg_done,
 	.ack_interrupt		= &at803x_ack_interrupt,
 	.config_intr		= &at803x_config_intr,
diff --git a/drivers/net/phy/bcm-cygnus.c b/drivers/net/phy/bcm-cygnus.c
index 625b7cb76..35e1fd3a1 100644
--- a/drivers/net/phy/bcm-cygnus.c
+++ b/drivers/net/phy/bcm-cygnus.c
@@ -254,7 +254,6 @@  static struct phy_driver bcm_cygnus_phy_driver[] = {
 	.phy_id        = PHY_ID_BCM_CYGNUS,
 	.phy_id_mask   = 0xfffffff0,
 	.name          = "Broadcom Cygnus PHY",
-	.features      = PHY_GBIT_FEATURES,
 	.config_init   = bcm_cygnus_config_init,
 	.ack_interrupt = bcm_phy_ack_intr,
 	.config_intr   = bcm_phy_config_intr,
@@ -264,7 +263,6 @@  static struct phy_driver bcm_cygnus_phy_driver[] = {
 	.phy_id		= PHY_ID_BCM_OMEGA,
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Broadcom Omega Combo GPHY",
-	.features	= PHY_GBIT_FEATURES,
 	.flags		= PHY_IS_INTERNAL,
 	.config_init	= bcm_omega_config_init,
 	.suspend	= genphy_suspend,
diff --git a/drivers/net/phy/bcm63xx.c b/drivers/net/phy/bcm63xx.c
index 44e6cff41..ff921b1ee 100644
--- a/drivers/net/phy/bcm63xx.c
+++ b/drivers/net/phy/bcm63xx.c
@@ -64,7 +64,6 @@  static struct phy_driver bcm63xx_driver[] = {
 	.phy_id		= 0x00406000,
 	.phy_id_mask	= 0xfffffc00,
 	.name		= "Broadcom BCM63XX (1)",
-	.features	= PHY_BASIC_FEATURES,
 	.flags		= PHY_IS_INTERNAL,
 	.config_init	= bcm63xx_config_init,
 	.ack_interrupt	= bcm_phy_ack_intr,
@@ -73,7 +72,6 @@  static struct phy_driver bcm63xx_driver[] = {
 	/* same phy as above, with just a different OUI */
 	.phy_id		= 0x002bdc00,
 	.phy_id_mask	= 0xfffffc00,
-	.features	= PHY_BASIC_FEATURES,
 	.flags		= PHY_IS_INTERNAL,
 	.config_init	= bcm63xx_config_init,
 	.ack_interrupt	= bcm_phy_ack_intr,
diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c
index a75e1b283..1d44aee75 100644
--- a/drivers/net/phy/bcm7xxx.c
+++ b/drivers/net/phy/bcm7xxx.c
@@ -538,7 +538,6 @@  static int bcm7xxx_28nm_probe(struct phy_device *phydev)
 	.phy_id		= (_oui),					\
 	.phy_id_mask	= 0xfffffff0,					\
 	.name		= _name,					\
-	.features	= PHY_GBIT_FEATURES,				\
 	.flags		= PHY_IS_INTERNAL,				\
 	.config_init	= bcm7xxx_28nm_config_init,			\
 	.resume		= bcm7xxx_28nm_resume,				\
@@ -555,7 +554,6 @@  static int bcm7xxx_28nm_probe(struct phy_device *phydev)
 	.phy_id		= (_oui),					\
 	.phy_id_mask	= 0xfffffff0,					\
 	.name		= _name,					\
-	.features	= PHY_BASIC_FEATURES,				\
 	.flags		= PHY_IS_INTERNAL,				\
 	.config_init	= bcm7xxx_28nm_ephy_config_init,		\
 	.resume		= bcm7xxx_28nm_ephy_resume,			\
@@ -570,7 +568,6 @@  static int bcm7xxx_28nm_probe(struct phy_device *phydev)
 	.phy_id         = (_oui),					\
 	.phy_id_mask    = 0xfffffff0,					\
 	.name           = _name,					\
-	.features       = PHY_BASIC_FEATURES,				\
 	.flags          = PHY_IS_INTERNAL,				\
 	.config_init    = bcm7xxx_config_init,				\
 	.suspend        = bcm7xxx_suspend,				\
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index cb86a3e90..601cdef91 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -610,7 +610,6 @@  static struct phy_driver broadcom_drivers[] = {
 	.phy_id		= PHY_ID_BCM5411,
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Broadcom BCM5411",
-	.features	= PHY_GBIT_FEATURES,
 	.config_init	= bcm54xx_config_init,
 	.ack_interrupt	= bcm_phy_ack_intr,
 	.config_intr	= bcm_phy_config_intr,
@@ -618,7 +617,6 @@  static struct phy_driver broadcom_drivers[] = {
 	.phy_id		= PHY_ID_BCM5421,
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Broadcom BCM5421",
-	.features	= PHY_GBIT_FEATURES,
 	.config_init	= bcm54xx_config_init,
 	.ack_interrupt	= bcm_phy_ack_intr,
 	.config_intr	= bcm_phy_config_intr,
@@ -626,7 +624,6 @@  static struct phy_driver broadcom_drivers[] = {
 	.phy_id		= PHY_ID_BCM54210E,
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Broadcom BCM54210E",
-	.features	= PHY_GBIT_FEATURES,
 	.config_init	= bcm54xx_config_init,
 	.ack_interrupt	= bcm_phy_ack_intr,
 	.config_intr	= bcm_phy_config_intr,
@@ -634,7 +631,6 @@  static struct phy_driver broadcom_drivers[] = {
 	.phy_id		= PHY_ID_BCM5461,
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Broadcom BCM5461",
-	.features	= PHY_GBIT_FEATURES,
 	.config_init	= bcm54xx_config_init,
 	.ack_interrupt	= bcm_phy_ack_intr,
 	.config_intr	= bcm_phy_config_intr,
@@ -642,7 +638,6 @@  static struct phy_driver broadcom_drivers[] = {
 	.phy_id		= PHY_ID_BCM54612E,
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Broadcom BCM54612E",
-	.features	= PHY_GBIT_FEATURES,
 	.config_init	= bcm54xx_config_init,
 	.ack_interrupt	= bcm_phy_ack_intr,
 	.config_intr	= bcm_phy_config_intr,
@@ -650,7 +645,6 @@  static struct phy_driver broadcom_drivers[] = {
 	.phy_id		= PHY_ID_BCM54616S,
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Broadcom BCM54616S",
-	.features	= PHY_GBIT_FEATURES,
 	.config_init	= bcm54xx_config_init,
 	.config_aneg	= bcm54616s_config_aneg,
 	.ack_interrupt	= bcm_phy_ack_intr,
@@ -659,7 +653,6 @@  static struct phy_driver broadcom_drivers[] = {
 	.phy_id		= PHY_ID_BCM5464,
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Broadcom BCM5464",
-	.features	= PHY_GBIT_FEATURES,
 	.config_init	= bcm54xx_config_init,
 	.ack_interrupt	= bcm_phy_ack_intr,
 	.config_intr	= bcm_phy_config_intr,
@@ -667,7 +660,6 @@  static struct phy_driver broadcom_drivers[] = {
 	.phy_id		= PHY_ID_BCM5481,
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Broadcom BCM5481",
-	.features	= PHY_GBIT_FEATURES,
 	.config_init	= bcm54xx_config_init,
 	.config_aneg	= bcm5481_config_aneg,
 	.ack_interrupt	= bcm_phy_ack_intr,
@@ -676,7 +668,6 @@  static struct phy_driver broadcom_drivers[] = {
 	.phy_id         = PHY_ID_BCM54810,
 	.phy_id_mask    = 0xfffffff0,
 	.name           = "Broadcom BCM54810",
-	.features       = PHY_GBIT_FEATURES,
 	.config_init    = bcm54xx_config_init,
 	.config_aneg    = bcm5481_config_aneg,
 	.ack_interrupt  = bcm_phy_ack_intr,
@@ -685,7 +676,6 @@  static struct phy_driver broadcom_drivers[] = {
 	.phy_id		= PHY_ID_BCM5482,
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Broadcom BCM5482",
-	.features	= PHY_GBIT_FEATURES,
 	.config_init	= bcm5482_config_init,
 	.read_status	= bcm5482_read_status,
 	.ack_interrupt	= bcm_phy_ack_intr,
@@ -694,7 +684,6 @@  static struct phy_driver broadcom_drivers[] = {
 	.phy_id		= PHY_ID_BCM50610,
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Broadcom BCM50610",
-	.features	= PHY_GBIT_FEATURES,
 	.config_init	= bcm54xx_config_init,
 	.ack_interrupt	= bcm_phy_ack_intr,
 	.config_intr	= bcm_phy_config_intr,
@@ -702,7 +691,6 @@  static struct phy_driver broadcom_drivers[] = {
 	.phy_id		= PHY_ID_BCM50610M,
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Broadcom BCM50610M",
-	.features	= PHY_GBIT_FEATURES,
 	.config_init	= bcm54xx_config_init,
 	.ack_interrupt	= bcm_phy_ack_intr,
 	.config_intr	= bcm_phy_config_intr,
@@ -710,7 +698,6 @@  static struct phy_driver broadcom_drivers[] = {
 	.phy_id		= PHY_ID_BCM57780,
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Broadcom BCM57780",
-	.features	= PHY_GBIT_FEATURES,
 	.config_init	= bcm54xx_config_init,
 	.ack_interrupt	= bcm_phy_ack_intr,
 	.config_intr	= bcm_phy_config_intr,
@@ -718,7 +705,6 @@  static struct phy_driver broadcom_drivers[] = {
 	.phy_id		= PHY_ID_BCMAC131,
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Broadcom BCMAC131",
-	.features	= PHY_BASIC_FEATURES,
 	.config_init	= brcm_fet_config_init,
 	.ack_interrupt	= brcm_fet_ack_interrupt,
 	.config_intr	= brcm_fet_config_intr,
@@ -726,7 +712,6 @@  static struct phy_driver broadcom_drivers[] = {
 	.phy_id		= PHY_ID_BCM5241,
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Broadcom BCM5241",
-	.features	= PHY_BASIC_FEATURES,
 	.config_init	= brcm_fet_config_init,
 	.ack_interrupt	= brcm_fet_ack_interrupt,
 	.config_intr	= brcm_fet_config_intr,
@@ -735,7 +720,6 @@  static struct phy_driver broadcom_drivers[] = {
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Broadcom BCM5395",
 	.flags		= PHY_IS_INTERNAL,
-	.features	= PHY_GBIT_FEATURES,
 	.get_sset_count	= bcm_phy_get_sset_count,
 	.get_strings	= bcm_phy_get_strings,
 	.get_stats	= bcm53xx_phy_get_stats,
@@ -744,7 +728,6 @@  static struct phy_driver broadcom_drivers[] = {
 	.phy_id         = PHY_ID_BCM89610,
 	.phy_id_mask    = 0xfffffff0,
 	.name           = "Broadcom BCM89610",
-	.features       = PHY_GBIT_FEATURES,
 	.config_init    = bcm54xx_config_init,
 	.ack_interrupt  = bcm_phy_ack_intr,
 	.config_intr    = bcm_phy_config_intr,
diff --git a/drivers/net/phy/cicada.c b/drivers/net/phy/cicada.c
index 108ed24f8..216606958 100644
--- a/drivers/net/phy/cicada.c
+++ b/drivers/net/phy/cicada.c
@@ -102,7 +102,6 @@  static struct phy_driver cis820x_driver[] = {
 	.phy_id		= 0x000fc410,
 	.name		= "Cicada Cis8201",
 	.phy_id_mask	= 0x000ffff0,
-	.features	= PHY_GBIT_FEATURES,
 	.config_init	= &cis820x_config_init,
 	.ack_interrupt	= &cis820x_ack_interrupt,
 	.config_intr	= &cis820x_config_intr,
@@ -110,7 +109,6 @@  static struct phy_driver cis820x_driver[] = {
 	.phy_id		= 0x000fc440,
 	.name		= "Cicada Cis8204",
 	.phy_id_mask	= 0x000fffc0,
-	.features	= PHY_GBIT_FEATURES,
 	.config_init	= &cis820x_config_init,
 	.ack_interrupt	= &cis820x_ack_interrupt,
 	.config_intr	= &cis820x_config_intr,
diff --git a/drivers/net/phy/davicom.c b/drivers/net/phy/davicom.c
index bf39baa7f..eb55054b5 100644
--- a/drivers/net/phy/davicom.c
+++ b/drivers/net/phy/davicom.c
@@ -144,7 +144,6 @@  static struct phy_driver dm91xx_driver[] = {
 	.phy_id		= 0x0181b880,
 	.name		= "Davicom DM9161E",
 	.phy_id_mask	= 0x0ffffff0,
-	.features	= PHY_BASIC_FEATURES,
 	.config_init	= dm9161_config_init,
 	.config_aneg	= dm9161_config_aneg,
 	.ack_interrupt	= dm9161_ack_interrupt,
@@ -153,7 +152,6 @@  static struct phy_driver dm91xx_driver[] = {
 	.phy_id		= 0x0181b8b0,
 	.name		= "Davicom DM9161B/C",
 	.phy_id_mask	= 0x0ffffff0,
-	.features	= PHY_BASIC_FEATURES,
 	.config_init	= dm9161_config_init,
 	.config_aneg	= dm9161_config_aneg,
 	.ack_interrupt	= dm9161_ack_interrupt,
@@ -162,7 +160,6 @@  static struct phy_driver dm91xx_driver[] = {
 	.phy_id		= 0x0181b8a0,
 	.name		= "Davicom DM9161A",
 	.phy_id_mask	= 0x0ffffff0,
-	.features	= PHY_BASIC_FEATURES,
 	.config_init	= dm9161_config_init,
 	.config_aneg	= dm9161_config_aneg,
 	.ack_interrupt	= dm9161_ack_interrupt,
@@ -171,7 +168,6 @@  static struct phy_driver dm91xx_driver[] = {
 	.phy_id		= 0x00181b80,
 	.name		= "Davicom DM9131",
 	.phy_id_mask	= 0x0ffffff0,
-	.features	= PHY_BASIC_FEATURES,
 	.ack_interrupt	= dm9161_ack_interrupt,
 	.config_intr	= dm9161_config_intr,
 } };
diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c
index 2fe2ebaf6..4f2bf2cd8 100644
--- a/drivers/net/phy/dp83640.c
+++ b/drivers/net/phy/dp83640.c
@@ -1514,7 +1514,6 @@  static struct phy_driver dp83640_driver = {
 	.phy_id		= DP83640_PHY_ID,
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "NatSemi DP83640",
-	.features	= PHY_BASIC_FEATURES,
 	.probe		= dp83640_probe,
 	.remove		= dp83640_remove,
 	.soft_reset	= dp83640_soft_reset,
diff --git a/drivers/net/phy/dp83822.c b/drivers/net/phy/dp83822.c
index 97d45bd5b..10053a761 100644
--- a/drivers/net/phy/dp83822.c
+++ b/drivers/net/phy/dp83822.c
@@ -310,7 +310,6 @@  static int dp83822_resume(struct phy_device *phydev)
 	{							\
 		PHY_ID_MATCH_MODEL(_id),			\
 		.name		= (_name),			\
-		.features	= PHY_BASIC_FEATURES,		\
 		.soft_reset	= dp83822_phy_reset,		\
 		.config_init	= dp83822_config_init,		\
 		.get_wol = dp83822_get_wol,			\
diff --git a/drivers/net/phy/dp83848.c b/drivers/net/phy/dp83848.c
index f55dc907c..86d005815 100644
--- a/drivers/net/phy/dp83848.c
+++ b/drivers/net/phy/dp83848.c
@@ -99,7 +99,6 @@  MODULE_DEVICE_TABLE(mdio, dp83848_tbl);
 		.phy_id		= _id,				\
 		.phy_id_mask	= 0xfffffff0,			\
 		.name		= _name,			\
-		.features	= PHY_BASIC_FEATURES,		\
 								\
 		.soft_reset	= genphy_soft_reset,		\
 		.config_init	= _config_init,			\
diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c
index 8448d0181..11768de2e 100644
--- a/drivers/net/phy/dp83867.c
+++ b/drivers/net/phy/dp83867.c
@@ -315,7 +315,6 @@  static struct phy_driver dp83867_driver[] = {
 		.phy_id		= DP83867_PHY_ID,
 		.phy_id_mask	= 0xfffffff0,
 		.name		= "TI DP83867",
-		.features	= PHY_GBIT_FEATURES,
 
 		.config_init	= dp83867_config_init,
 		.soft_reset	= dp83867_phy_reset,
diff --git a/drivers/net/phy/dp83tc811.c b/drivers/net/phy/dp83tc811.c
index e9704af1d..012749d35 100644
--- a/drivers/net/phy/dp83tc811.c
+++ b/drivers/net/phy/dp83tc811.c
@@ -338,7 +338,6 @@  static struct phy_driver dp83811_driver[] = {
 		.phy_id = DP83TC811_PHY_ID,
 		.phy_id_mask = 0xfffffff0,
 		.name = "TI DP83TC811",
-		.features = PHY_BASIC_FEATURES,
 		.config_init = dp83811_config_init,
 		.config_aneg = dp83811_config_aneg,
 		.soft_reset = dp83811_phy_reset,
diff --git a/drivers/net/phy/et1011c.c b/drivers/net/phy/et1011c.c
index 2aa367c04..34354c737 100644
--- a/drivers/net/phy/et1011c.c
+++ b/drivers/net/phy/et1011c.c
@@ -86,7 +86,6 @@  static struct phy_driver et1011c_driver[] = { {
 	.phy_id		= 0x0282f014,
 	.name		= "ET1011C",
 	.phy_id_mask	= 0xfffffff0,
-	.features	= PHY_GBIT_FEATURES,
 	.config_aneg	= et1011c_config_aneg,
 	.read_status	= et1011c_read_status,
 } };
diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c
index ebef8354b..89e99760f 100644
--- a/drivers/net/phy/icplus.c
+++ b/drivers/net/phy/icplus.c
@@ -311,7 +311,6 @@  static struct phy_driver icplus_driver[] = {
 	.phy_id		= 0x02430d80,
 	.name		= "ICPlus IP175C",
 	.phy_id_mask	= 0x0ffffff0,
-	.features	= PHY_BASIC_FEATURES,
 	.config_init	= &ip175c_config_init,
 	.config_aneg	= &ip175c_config_aneg,
 	.read_status	= &ip175c_read_status,
@@ -321,7 +320,6 @@  static struct phy_driver icplus_driver[] = {
 	.phy_id		= 0x02430d90,
 	.name		= "ICPlus IP1001",
 	.phy_id_mask	= 0x0ffffff0,
-	.features	= PHY_GBIT_FEATURES,
 	.config_init	= &ip1001_config_init,
 	.suspend	= genphy_suspend,
 	.resume		= genphy_resume,
@@ -329,7 +327,6 @@  static struct phy_driver icplus_driver[] = {
 	.phy_id		= 0x02430c54,
 	.name		= "ICPlus IP101A/G",
 	.phy_id_mask	= 0x0ffffff0,
-	.features	= PHY_BASIC_FEATURES,
 	.probe		= ip101a_g_probe,
 	.config_intr	= ip101a_g_config_intr,
 	.did_interrupt	= ip101a_g_did_interrupt,
diff --git a/drivers/net/phy/intel-xway.c b/drivers/net/phy/intel-xway.c
index 02d971331..abad888ba 100644
--- a/drivers/net/phy/intel-xway.c
+++ b/drivers/net/phy/intel-xway.c
@@ -232,7 +232,6 @@  static struct phy_driver xway_gphy[] = {
 		.phy_id		= PHY_ID_PHY11G_1_3,
 		.phy_id_mask	= 0xffffffff,
 		.name		= "Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.3",
-		.features	= PHY_GBIT_FEATURES,
 		.config_init	= xway_gphy_config_init,
 		.config_aneg	= xway_gphy14_config_aneg,
 		.ack_interrupt	= xway_gphy_ack_interrupt,
@@ -244,7 +243,6 @@  static struct phy_driver xway_gphy[] = {
 		.phy_id		= PHY_ID_PHY22F_1_3,
 		.phy_id_mask	= 0xffffffff,
 		.name		= "Intel XWAY PHY22F (PEF 7061) v1.3",
-		.features	= PHY_BASIC_FEATURES,
 		.config_init	= xway_gphy_config_init,
 		.config_aneg	= xway_gphy14_config_aneg,
 		.ack_interrupt	= xway_gphy_ack_interrupt,
@@ -256,7 +254,6 @@  static struct phy_driver xway_gphy[] = {
 		.phy_id		= PHY_ID_PHY11G_1_4,
 		.phy_id_mask	= 0xffffffff,
 		.name		= "Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.4",
-		.features	= PHY_GBIT_FEATURES,
 		.config_init	= xway_gphy_config_init,
 		.config_aneg	= xway_gphy14_config_aneg,
 		.ack_interrupt	= xway_gphy_ack_interrupt,
@@ -268,7 +265,6 @@  static struct phy_driver xway_gphy[] = {
 		.phy_id		= PHY_ID_PHY22F_1_4,
 		.phy_id_mask	= 0xffffffff,
 		.name		= "Intel XWAY PHY22F (PEF 7061) v1.4",
-		.features	= PHY_BASIC_FEATURES,
 		.config_init	= xway_gphy_config_init,
 		.config_aneg	= xway_gphy14_config_aneg,
 		.ack_interrupt	= xway_gphy_ack_interrupt,
@@ -280,7 +276,6 @@  static struct phy_driver xway_gphy[] = {
 		.phy_id		= PHY_ID_PHY11G_1_5,
 		.phy_id_mask	= 0xffffffff,
 		.name		= "Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.5 / v1.6",
-		.features	= PHY_GBIT_FEATURES,
 		.config_init	= xway_gphy_config_init,
 		.ack_interrupt	= xway_gphy_ack_interrupt,
 		.did_interrupt	= xway_gphy_did_interrupt,
@@ -291,7 +286,6 @@  static struct phy_driver xway_gphy[] = {
 		.phy_id		= PHY_ID_PHY22F_1_5,
 		.phy_id_mask	= 0xffffffff,
 		.name		= "Intel XWAY PHY22F (PEF 7061) v1.5 / v1.6",
-		.features	= PHY_BASIC_FEATURES,
 		.config_init	= xway_gphy_config_init,
 		.ack_interrupt	= xway_gphy_ack_interrupt,
 		.did_interrupt	= xway_gphy_did_interrupt,
@@ -302,7 +296,6 @@  static struct phy_driver xway_gphy[] = {
 		.phy_id		= PHY_ID_PHY11G_VR9_1_1,
 		.phy_id_mask	= 0xffffffff,
 		.name		= "Intel XWAY PHY11G (xRX v1.1 integrated)",
-		.features	= PHY_GBIT_FEATURES,
 		.config_init	= xway_gphy_config_init,
 		.ack_interrupt	= xway_gphy_ack_interrupt,
 		.did_interrupt	= xway_gphy_did_interrupt,
@@ -313,7 +306,6 @@  static struct phy_driver xway_gphy[] = {
 		.phy_id		= PHY_ID_PHY22F_VR9_1_1,
 		.phy_id_mask	= 0xffffffff,
 		.name		= "Intel XWAY PHY22F (xRX v1.1 integrated)",
-		.features	= PHY_BASIC_FEATURES,
 		.config_init	= xway_gphy_config_init,
 		.ack_interrupt	= xway_gphy_ack_interrupt,
 		.did_interrupt	= xway_gphy_did_interrupt,
@@ -324,7 +316,6 @@  static struct phy_driver xway_gphy[] = {
 		.phy_id		= PHY_ID_PHY11G_VR9_1_2,
 		.phy_id_mask	= 0xffffffff,
 		.name		= "Intel XWAY PHY11G (xRX v1.2 integrated)",
-		.features	= PHY_GBIT_FEATURES,
 		.config_init	= xway_gphy_config_init,
 		.ack_interrupt	= xway_gphy_ack_interrupt,
 		.did_interrupt	= xway_gphy_did_interrupt,
@@ -335,7 +326,6 @@  static struct phy_driver xway_gphy[] = {
 		.phy_id		= PHY_ID_PHY22F_VR9_1_2,
 		.phy_id_mask	= 0xffffffff,
 		.name		= "Intel XWAY PHY22F (xRX v1.2 integrated)",
-		.features	= PHY_BASIC_FEATURES,
 		.config_init	= xway_gphy_config_init,
 		.ack_interrupt	= xway_gphy_ack_interrupt,
 		.did_interrupt	= xway_gphy_did_interrupt,
diff --git a/drivers/net/phy/lxt.c b/drivers/net/phy/lxt.c
index a93d673ba..e540ff32e 100644
--- a/drivers/net/phy/lxt.c
+++ b/drivers/net/phy/lxt.c
@@ -251,7 +251,6 @@  static struct phy_driver lxt97x_driver[] = {
 	.phy_id		= 0x78100000,
 	.name		= "LXT970",
 	.phy_id_mask	= 0xfffffff0,
-	.features	= PHY_BASIC_FEATURES,
 	.config_init	= lxt970_config_init,
 	.ack_interrupt	= lxt970_ack_interrupt,
 	.config_intr	= lxt970_config_intr,
@@ -259,14 +258,12 @@  static struct phy_driver lxt97x_driver[] = {
 	.phy_id		= 0x001378e0,
 	.name		= "LXT971",
 	.phy_id_mask	= 0xfffffff0,
-	.features	= PHY_BASIC_FEATURES,
 	.ack_interrupt	= lxt971_ack_interrupt,
 	.config_intr	= lxt971_config_intr,
 }, {
 	.phy_id		= 0x00137a10,
 	.name		= "LXT973-A2",
 	.phy_id_mask	= 0xffffffff,
-	.features	= PHY_BASIC_FEATURES,
 	.flags		= 0,
 	.probe		= lxt973_probe,
 	.config_aneg	= lxt973_config_aneg,
@@ -275,7 +272,6 @@  static struct phy_driver lxt97x_driver[] = {
 	.phy_id		= 0x00137a10,
 	.name		= "LXT973",
 	.phy_id_mask	= 0xfffffff0,
-	.features	= PHY_BASIC_FEATURES,
 	.flags		= 0,
 	.probe		= lxt973_probe,
 	.config_aneg	= lxt973_config_aneg,
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 65350186d..96664f62b 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -2126,7 +2126,6 @@  static struct phy_driver marvell_drivers[] = {
 		.phy_id = MARVELL_PHY_ID_88E1101,
 		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1101",
-		.features = PHY_GBIT_FEATURES,
 		.probe = marvell_probe,
 		.config_init = &marvell_config_init,
 		.config_aneg = &m88e1101_config_aneg,
@@ -2144,7 +2143,6 @@  static struct phy_driver marvell_drivers[] = {
 		.phy_id = MARVELL_PHY_ID_88E1112,
 		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1112",
-		.features = PHY_GBIT_FEATURES,
 		.probe = marvell_probe,
 		.config_init = &m88e1111_config_init,
 		.config_aneg = &marvell_config_aneg,
@@ -2162,7 +2160,6 @@  static struct phy_driver marvell_drivers[] = {
 		.phy_id = MARVELL_PHY_ID_88E1111,
 		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1111",
-		.features = PHY_GBIT_FEATURES,
 		.probe = marvell_probe,
 		.config_init = &m88e1111_config_init,
 		.config_aneg = &marvell_config_aneg,
@@ -2181,7 +2178,6 @@  static struct phy_driver marvell_drivers[] = {
 		.phy_id = MARVELL_PHY_ID_88E1118,
 		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1118",
-		.features = PHY_GBIT_FEATURES,
 		.probe = marvell_probe,
 		.config_init = &m88e1118_config_init,
 		.config_aneg = &m88e1118_config_aneg,
@@ -2199,7 +2195,6 @@  static struct phy_driver marvell_drivers[] = {
 		.phy_id = MARVELL_PHY_ID_88E1121R,
 		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1121R",
-		.features = PHY_GBIT_FEATURES,
 		.probe = &m88e1121_probe,
 		.config_init = &marvell_config_init,
 		.config_aneg = &m88e1121_config_aneg,
@@ -2219,7 +2214,6 @@  static struct phy_driver marvell_drivers[] = {
 		.phy_id = MARVELL_PHY_ID_88E1318S,
 		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1318S",
-		.features = PHY_GBIT_FEATURES,
 		.probe = marvell_probe,
 		.config_init = &m88e1318_config_init,
 		.config_aneg = &m88e1318_config_aneg,
@@ -2241,7 +2235,6 @@  static struct phy_driver marvell_drivers[] = {
 		.phy_id = MARVELL_PHY_ID_88E1145,
 		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1145",
-		.features = PHY_GBIT_FEATURES,
 		.probe = marvell_probe,
 		.config_init = &m88e1145_config_init,
 		.config_aneg = &m88e1101_config_aneg,
@@ -2260,7 +2253,6 @@  static struct phy_driver marvell_drivers[] = {
 		.phy_id = MARVELL_PHY_ID_88E1149R,
 		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1149R",
-		.features = PHY_GBIT_FEATURES,
 		.probe = marvell_probe,
 		.config_init = &m88e1149_config_init,
 		.config_aneg = &m88e1118_config_aneg,
@@ -2278,7 +2270,6 @@  static struct phy_driver marvell_drivers[] = {
 		.phy_id = MARVELL_PHY_ID_88E1240,
 		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1240",
-		.features = PHY_GBIT_FEATURES,
 		.probe = marvell_probe,
 		.config_init = &m88e1111_config_init,
 		.config_aneg = &marvell_config_aneg,
@@ -2296,7 +2287,6 @@  static struct phy_driver marvell_drivers[] = {
 		.phy_id = MARVELL_PHY_ID_88E1116R,
 		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1116R",
-		.features = PHY_GBIT_FEATURES,
 		.probe = marvell_probe,
 		.config_init = &m88e1116r_config_init,
 		.ack_interrupt = &marvell_ack_interrupt,
@@ -2336,7 +2326,6 @@  static struct phy_driver marvell_drivers[] = {
 		.phy_id = MARVELL_PHY_ID_88E1540,
 		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1540",
-		.features = PHY_GBIT_FEATURES,
 		.probe = m88e1510_probe,
 		.config_init = &marvell_config_init,
 		.config_aneg = &m88e1510_config_aneg,
@@ -2359,7 +2348,6 @@  static struct phy_driver marvell_drivers[] = {
 		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1545",
 		.probe = m88e1510_probe,
-		.features = PHY_GBIT_FEATURES,
 		.config_init = &marvell_config_init,
 		.config_aneg = &m88e1510_config_aneg,
 		.read_status = &marvell_read_status,
@@ -2378,7 +2366,6 @@  static struct phy_driver marvell_drivers[] = {
 		.phy_id = MARVELL_PHY_ID_88E3016,
 		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E3016",
-		.features = PHY_BASIC_FEATURES,
 		.probe = marvell_probe,
 		.config_init = &m88e3016_config_init,
 		.aneg_done = &marvell_aneg_done,
@@ -2398,7 +2385,6 @@  static struct phy_driver marvell_drivers[] = {
 		.phy_id = MARVELL_PHY_ID_88E6390,
 		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E6390",
-		.features = PHY_GBIT_FEATURES,
 		.probe = m88e6390_probe,
 		.config_init = &marvell_config_init,
 		.config_aneg = &m88e6390_config_aneg,
diff --git a/drivers/net/phy/meson-gxl.c b/drivers/net/phy/meson-gxl.c
index 6d4a8c508..d7d1b6b80 100644
--- a/drivers/net/phy/meson-gxl.c
+++ b/drivers/net/phy/meson-gxl.c
@@ -226,7 +226,6 @@  static struct phy_driver meson_gxl_phy[] = {
 	{
 		PHY_ID_MATCH_EXACT(0x01814400),
 		.name		= "Meson GXL Internal PHY",
-		.features	= PHY_BASIC_FEATURES,
 		.flags		= PHY_IS_INTERNAL,
 		.soft_reset     = genphy_soft_reset,
 		.config_init	= meson_gxl_config_init,
@@ -238,7 +237,6 @@  static struct phy_driver meson_gxl_phy[] = {
 	}, {
 		PHY_ID_MATCH_EXACT(0x01803301),
 		.name		= "Meson G12A Internal PHY",
-		.features	= PHY_BASIC_FEATURES,
 		.flags		= PHY_IS_INTERNAL,
 		.soft_reset     = genphy_soft_reset,
 		.ack_interrupt	= meson_gxl_ack_interrupt,
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 352da24f1..084e8917a 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -908,7 +908,6 @@  static struct phy_driver ksphy_driver[] = {
 	.phy_id		= PHY_ID_KS8737,
 	.phy_id_mask	= MICREL_PHY_ID_MASK,
 	.name		= "Micrel KS8737",
-	.features	= PHY_BASIC_FEATURES,
 	.driver_data	= &ks8737_type,
 	.config_init	= kszphy_config_init,
 	.ack_interrupt	= kszphy_ack_interrupt,
@@ -919,7 +918,6 @@  static struct phy_driver ksphy_driver[] = {
 	.phy_id		= PHY_ID_KSZ8021,
 	.phy_id_mask	= 0x00ffffff,
 	.name		= "Micrel KSZ8021 or KSZ8031",
-	.features	= PHY_BASIC_FEATURES,
 	.driver_data	= &ksz8021_type,
 	.probe		= kszphy_probe,
 	.config_init	= kszphy_config_init,
@@ -934,7 +932,6 @@  static struct phy_driver ksphy_driver[] = {
 	.phy_id		= PHY_ID_KSZ8031,
 	.phy_id_mask	= 0x00ffffff,
 	.name		= "Micrel KSZ8031",
-	.features	= PHY_BASIC_FEATURES,
 	.driver_data	= &ksz8021_type,
 	.probe		= kszphy_probe,
 	.config_init	= kszphy_config_init,
@@ -949,7 +946,6 @@  static struct phy_driver ksphy_driver[] = {
 	.phy_id		= PHY_ID_KSZ8041,
 	.phy_id_mask	= MICREL_PHY_ID_MASK,
 	.name		= "Micrel KSZ8041",
-	.features	= PHY_BASIC_FEATURES,
 	.driver_data	= &ksz8041_type,
 	.probe		= kszphy_probe,
 	.config_init	= ksz8041_config_init,
@@ -965,7 +961,6 @@  static struct phy_driver ksphy_driver[] = {
 	.phy_id		= PHY_ID_KSZ8041RNLI,
 	.phy_id_mask	= MICREL_PHY_ID_MASK,
 	.name		= "Micrel KSZ8041RNLI",
-	.features	= PHY_BASIC_FEATURES,
 	.driver_data	= &ksz8041_type,
 	.probe		= kszphy_probe,
 	.config_init	= kszphy_config_init,
@@ -980,7 +975,6 @@  static struct phy_driver ksphy_driver[] = {
 	.phy_id		= PHY_ID_KSZ8051,
 	.phy_id_mask	= MICREL_PHY_ID_MASK,
 	.name		= "Micrel KSZ8051",
-	.features	= PHY_BASIC_FEATURES,
 	.driver_data	= &ksz8051_type,
 	.probe		= kszphy_probe,
 	.config_init	= kszphy_config_init,
@@ -995,7 +989,6 @@  static struct phy_driver ksphy_driver[] = {
 	.phy_id		= PHY_ID_KSZ8001,
 	.name		= "Micrel KSZ8001 or KS8721",
 	.phy_id_mask	= 0x00fffffc,
-	.features	= PHY_BASIC_FEATURES,
 	.driver_data	= &ksz8041_type,
 	.probe		= kszphy_probe,
 	.config_init	= kszphy_config_init,
@@ -1010,7 +1003,6 @@  static struct phy_driver ksphy_driver[] = {
 	.phy_id		= PHY_ID_KSZ8081,
 	.name		= "Micrel KSZ8081 or KSZ8091",
 	.phy_id_mask	= MICREL_PHY_ID_MASK,
-	.features	= PHY_BASIC_FEATURES,
 	.driver_data	= &ksz8081_type,
 	.probe		= kszphy_probe,
 	.config_init	= kszphy_config_init,
@@ -1025,7 +1017,6 @@  static struct phy_driver ksphy_driver[] = {
 	.phy_id		= PHY_ID_KSZ8061,
 	.name		= "Micrel KSZ8061",
 	.phy_id_mask	= MICREL_PHY_ID_MASK,
-	.features	= PHY_BASIC_FEATURES,
 	.config_init	= ksz8061_config_init,
 	.ack_interrupt	= kszphy_ack_interrupt,
 	.config_intr	= kszphy_config_intr,
@@ -1035,7 +1026,6 @@  static struct phy_driver ksphy_driver[] = {
 	.phy_id		= PHY_ID_KSZ9021,
 	.phy_id_mask	= 0x000ffffe,
 	.name		= "Micrel KSZ9021 Gigabit PHY",
-	.features	= PHY_GBIT_FEATURES,
 	.driver_data	= &ksz9021_type,
 	.probe		= kszphy_probe,
 	.config_init	= ksz9021_config_init,
@@ -1052,7 +1042,6 @@  static struct phy_driver ksphy_driver[] = {
 	.phy_id		= PHY_ID_KSZ9031,
 	.phy_id_mask	= MICREL_PHY_ID_MASK,
 	.name		= "Micrel KSZ9031 Gigabit PHY",
-	.features	= PHY_GBIT_FEATURES,
 	.driver_data	= &ksz9021_type,
 	.probe		= kszphy_probe,
 	.config_init	= ksz9031_config_init,
@@ -1069,7 +1058,6 @@  static struct phy_driver ksphy_driver[] = {
 	.phy_id		= PHY_ID_KSZ9131,
 	.phy_id_mask	= MICREL_PHY_ID_MASK,
 	.name		= "Microchip KSZ9131 Gigabit PHY",
-	.features	= PHY_GBIT_FEATURES,
 	.driver_data	= &ksz9021_type,
 	.probe		= kszphy_probe,
 	.config_init	= ksz9131_config_init,
@@ -1085,7 +1073,6 @@  static struct phy_driver ksphy_driver[] = {
 	.phy_id		= PHY_ID_KSZ8873MLL,
 	.phy_id_mask	= MICREL_PHY_ID_MASK,
 	.name		= "Micrel KSZ8873MLL Switch",
-	.features	= PHY_BASIC_FEATURES,
 	.config_init	= kszphy_config_init,
 	.config_aneg	= ksz8873mll_config_aneg,
 	.read_status	= ksz8873mll_read_status,
@@ -1095,7 +1082,6 @@  static struct phy_driver ksphy_driver[] = {
 	.phy_id		= PHY_ID_KSZ886X,
 	.phy_id_mask	= MICREL_PHY_ID_MASK,
 	.name		= "Micrel KSZ886X Switch",
-	.features	= PHY_BASIC_FEATURES,
 	.config_init	= kszphy_config_init,
 	.suspend	= genphy_suspend,
 	.resume		= genphy_resume,
@@ -1103,7 +1089,6 @@  static struct phy_driver ksphy_driver[] = {
 	.phy_id		= PHY_ID_KSZ8795,
 	.phy_id_mask	= MICREL_PHY_ID_MASK,
 	.name		= "Micrel KSZ8795",
-	.features	= PHY_BASIC_FEATURES,
 	.config_init	= kszphy_config_init,
 	.config_aneg	= ksz8873mll_config_aneg,
 	.read_status	= ksz8873mll_read_status,
@@ -1113,7 +1098,6 @@  static struct phy_driver ksphy_driver[] = {
 	.phy_id		= PHY_ID_KSZ9477,
 	.phy_id_mask	= MICREL_PHY_ID_MASK,
 	.name		= "Microchip KSZ9477",
-	.features	= PHY_GBIT_FEATURES,
 	.config_init	= kszphy_config_init,
 	.suspend	= genphy_suspend,
 	.resume		= genphy_resume,
diff --git a/drivers/net/phy/microchip.c b/drivers/net/phy/microchip.c
index c6cbb3aa8..f77130d31 100644
--- a/drivers/net/phy/microchip.c
+++ b/drivers/net/phy/microchip.c
@@ -333,8 +333,6 @@  static struct phy_driver microchip_phy_driver[] = {
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Microchip LAN88xx",
 
-	.features	= PHY_GBIT_FEATURES,
-
 	.probe		= lan88xx_probe,
 	.remove		= lan88xx_remove,
 
diff --git a/drivers/net/phy/mscc.c b/drivers/net/phy/mscc.c
index db50efb30..a40c89fc6 100644
--- a/drivers/net/phy/mscc.c
+++ b/drivers/net/phy/mscc.c
@@ -1882,7 +1882,6 @@  static struct phy_driver vsc85xx_driver[] = {
 	.phy_id		= PHY_ID_VSC8530,
 	.name		= "Microsemi FE VSC8530",
 	.phy_id_mask	= 0xfffffff0,
-	.features	= PHY_BASIC_FEATURES,
 	.soft_reset	= &genphy_soft_reset,
 	.config_init	= &vsc85xx_config_init,
 	.config_aneg    = &vsc85xx_config_aneg,
@@ -1907,7 +1906,6 @@  static struct phy_driver vsc85xx_driver[] = {
 	.phy_id		= PHY_ID_VSC8531,
 	.name		= "Microsemi VSC8531",
 	.phy_id_mask    = 0xfffffff0,
-	.features	= PHY_GBIT_FEATURES,
 	.soft_reset	= &genphy_soft_reset,
 	.config_init    = &vsc85xx_config_init,
 	.config_aneg    = &vsc85xx_config_aneg,
@@ -1932,7 +1930,6 @@  static struct phy_driver vsc85xx_driver[] = {
 	.phy_id		= PHY_ID_VSC8540,
 	.name		= "Microsemi FE VSC8540 SyncE",
 	.phy_id_mask	= 0xfffffff0,
-	.features	= PHY_BASIC_FEATURES,
 	.soft_reset	= &genphy_soft_reset,
 	.config_init	= &vsc85xx_config_init,
 	.config_aneg	= &vsc85xx_config_aneg,
@@ -1957,7 +1954,6 @@  static struct phy_driver vsc85xx_driver[] = {
 	.phy_id		= PHY_ID_VSC8541,
 	.name		= "Microsemi VSC8541 SyncE",
 	.phy_id_mask    = 0xfffffff0,
-	.features	= PHY_GBIT_FEATURES,
 	.soft_reset	= &genphy_soft_reset,
 	.config_init    = &vsc85xx_config_init,
 	.config_aneg    = &vsc85xx_config_aneg,
@@ -1982,7 +1978,6 @@  static struct phy_driver vsc85xx_driver[] = {
 	.phy_id		= PHY_ID_VSC8574,
 	.name		= "Microsemi GE VSC8574 SyncE",
 	.phy_id_mask	= 0xfffffff0,
-	.features	= PHY_GBIT_FEATURES,
 	.soft_reset	= &genphy_soft_reset,
 	.config_init    = &vsc8584_config_init,
 	.config_aneg    = &vsc85xx_config_aneg,
@@ -2008,7 +2003,6 @@  static struct phy_driver vsc85xx_driver[] = {
 	.phy_id		= PHY_ID_VSC8584,
 	.name		= "Microsemi GE VSC8584 SyncE",
 	.phy_id_mask	= 0xfffffff0,
-	.features	= PHY_GBIT_FEATURES,
 	.soft_reset	= &genphy_soft_reset,
 	.config_init    = &vsc8584_config_init,
 	.config_aneg    = &vsc85xx_config_aneg,
diff --git a/drivers/net/phy/national.c b/drivers/net/phy/national.c
index 42282a86b..d233ebe27 100644
--- a/drivers/net/phy/national.c
+++ b/drivers/net/phy/national.c
@@ -128,7 +128,6 @@  static struct phy_driver dp83865_driver[] = { {
 	.phy_id = DP83865_PHY_ID,
 	.phy_id_mask = 0xfffffff0,
 	.name = "NatSemi DP83865",
-	.features = PHY_GBIT_FEATURES,
 	.config_init = ns_config_init,
 	.ack_interrupt = ns_ack_interrupt,
 	.config_intr = ns_config_intr,
diff --git a/drivers/net/phy/qsemi.c b/drivers/net/phy/qsemi.c
index 5486f6fb2..6cffae137 100644
--- a/drivers/net/phy/qsemi.c
+++ b/drivers/net/phy/qsemi.c
@@ -110,7 +110,6 @@  static struct phy_driver qs6612_driver[] = { {
 	.phy_id		= 0x00181440,
 	.name		= "QS6612",
 	.phy_id_mask	= 0xfffffff0,
-	.features	= PHY_BASIC_FEATURES,
 	.config_init	= qs6612_config_init,
 	.ack_interrupt	= qs6612_ack_interrupt,
 	.config_intr	= qs6612_config_intr,
diff --git a/drivers/net/phy/rockchip.c b/drivers/net/phy/rockchip.c
index 9053b1d01..039c051d2 100644
--- a/drivers/net/phy/rockchip.c
+++ b/drivers/net/phy/rockchip.c
@@ -175,7 +175,6 @@  static struct phy_driver rockchip_phy_driver[] = {
 	.phy_id			= INTERNAL_EPHY_ID,
 	.phy_id_mask		= 0xfffffff0,
 	.name			= "Rockchip integrated EPHY",
-	.features		= PHY_BASIC_FEATURES,
 	.flags			= 0,
 	.link_change_notify	= rockchip_link_change_notify,
 	.soft_reset		= genphy_soft_reset,
diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c
index c94d3bfbc..0d44709e9 100644
--- a/drivers/net/phy/smsc.c
+++ b/drivers/net/phy/smsc.c
@@ -214,8 +214,6 @@  static struct phy_driver smsc_phy_driver[] = {
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "SMSC LAN83C185",
 
-	.features	= PHY_BASIC_FEATURES,
-
 	.probe		= smsc_phy_probe,
 
 	/* basic functions */
@@ -233,8 +231,6 @@  static struct phy_driver smsc_phy_driver[] = {
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "SMSC LAN8187",
 
-	.features	= PHY_BASIC_FEATURES,
-
 	.probe		= smsc_phy_probe,
 
 	/* basic functions */
@@ -257,8 +253,6 @@  static struct phy_driver smsc_phy_driver[] = {
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "SMSC LAN8700",
 
-	.features	= PHY_BASIC_FEATURES,
-
 	.probe		= smsc_phy_probe,
 
 	/* basic functions */
@@ -282,8 +276,6 @@  static struct phy_driver smsc_phy_driver[] = {
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "SMSC LAN911x Internal PHY",
 
-	.features	= PHY_BASIC_FEATURES,
-
 	.probe		= smsc_phy_probe,
 
 	/* basic functions */
@@ -300,7 +292,6 @@  static struct phy_driver smsc_phy_driver[] = {
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "SMSC LAN8710/LAN8720",
 
-	.features	= PHY_BASIC_FEATURES,
 	.flags		= PHY_RST_AFTER_CLK_EN,
 
 	.probe		= smsc_phy_probe,
@@ -326,8 +317,6 @@  static struct phy_driver smsc_phy_driver[] = {
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "SMSC LAN8740",
 
-	.features	= PHY_BASIC_FEATURES,
-
 	.probe		= smsc_phy_probe,
 
 	/* basic functions */
diff --git a/drivers/net/phy/ste10Xp.c b/drivers/net/phy/ste10Xp.c
index 5b6acf431..a5aa89667 100644
--- a/drivers/net/phy/ste10Xp.c
+++ b/drivers/net/phy/ste10Xp.c
@@ -81,7 +81,6 @@  static struct phy_driver ste10xp_pdriver[] = {
 	.phy_id = STE101P_PHY_ID,
 	.phy_id_mask = 0xfffffff0,
 	.name = "STe101p",
-	.features = PHY_BASIC_FEATURES,
 	.config_init = ste10Xp_config_init,
 	.ack_interrupt = ste10Xp_ack_interrupt,
 	.config_intr = ste10Xp_config_intr,
@@ -91,7 +90,6 @@  static struct phy_driver ste10xp_pdriver[] = {
 	.phy_id = STE100P_PHY_ID,
 	.phy_id_mask = 0xffffffff,
 	.name = "STe100p",
-	.features = PHY_BASIC_FEATURES,
 	.config_init = ste10Xp_config_init,
 	.ack_interrupt = ste10Xp_ack_interrupt,
 	.config_intr = ste10Xp_config_intr,
diff --git a/drivers/net/phy/uPD60620.c b/drivers/net/phy/uPD60620.c
index 219fc7cdc..145689813 100644
--- a/drivers/net/phy/uPD60620.c
+++ b/drivers/net/phy/uPD60620.c
@@ -87,7 +87,6 @@  static struct phy_driver upd60620_driver[1] = { {
 	.phy_id         = UPD60620_PHY_ID,
 	.phy_id_mask    = 0xfffffffe,
 	.name           = "Renesas uPD60620",
-	.features       = PHY_BASIC_FEATURES,
 	.flags          = 0,
 	.config_init    = upd60620_config_init,
 	.read_status    = upd60620_read_status,
diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c
index dc0dd87a6..34077e475 100644
--- a/drivers/net/phy/vitesse.c
+++ b/drivers/net/phy/vitesse.c
@@ -389,7 +389,6 @@  static struct phy_driver vsc82xx_driver[] = {
 	.phy_id         = PHY_ID_VSC8234,
 	.name           = "Vitesse VSC8234",
 	.phy_id_mask    = 0x000ffff0,
-	.features       = PHY_GBIT_FEATURES,
 	.config_init    = &vsc824x_config_init,
 	.config_aneg    = &vsc82x4_config_aneg,
 	.ack_interrupt  = &vsc824x_ack_interrupt,
@@ -398,7 +397,6 @@  static struct phy_driver vsc82xx_driver[] = {
 	.phy_id		= PHY_ID_VSC8244,
 	.name		= "Vitesse VSC8244",
 	.phy_id_mask	= 0x000fffc0,
-	.features	= PHY_GBIT_FEATURES,
 	.config_init	= &vsc824x_config_init,
 	.config_aneg	= &vsc82x4_config_aneg,
 	.ack_interrupt	= &vsc824x_ack_interrupt,
@@ -407,7 +405,6 @@  static struct phy_driver vsc82xx_driver[] = {
 	.phy_id		= PHY_ID_VSC8514,
 	.name		= "Vitesse VSC8514",
 	.phy_id_mask	= 0x000ffff0,
-	.features	= PHY_GBIT_FEATURES,
 	.config_init	= &vsc824x_config_init,
 	.config_aneg	= &vsc82x4_config_aneg,
 	.ack_interrupt	= &vsc824x_ack_interrupt,
@@ -416,7 +413,6 @@  static struct phy_driver vsc82xx_driver[] = {
 	.phy_id         = PHY_ID_VSC8572,
 	.name           = "Vitesse VSC8572",
 	.phy_id_mask    = 0x000ffff0,
-	.features       = PHY_GBIT_FEATURES,
 	.config_init    = &vsc824x_config_init,
 	.config_aneg    = &vsc82x4_config_aneg,
 	.ack_interrupt  = &vsc824x_ack_interrupt,
@@ -425,7 +421,6 @@  static struct phy_driver vsc82xx_driver[] = {
 	.phy_id         = PHY_ID_VSC8601,
 	.name           = "Vitesse VSC8601",
 	.phy_id_mask    = 0x000ffff0,
-	.features       = PHY_GBIT_FEATURES,
 	.config_init    = &vsc8601_config_init,
 	.ack_interrupt  = &vsc824x_ack_interrupt,
 	.config_intr    = &vsc82xx_config_intr,
@@ -433,7 +428,6 @@  static struct phy_driver vsc82xx_driver[] = {
 	.phy_id         = PHY_ID_VSC7385,
 	.name           = "Vitesse VSC7385",
 	.phy_id_mask    = 0x000ffff0,
-	.features       = PHY_GBIT_FEATURES,
 	.config_init    = vsc738x_config_init,
 	.config_aneg    = vsc73xx_config_aneg,
 	.read_page      = vsc73xx_read_page,
@@ -442,7 +436,6 @@  static struct phy_driver vsc82xx_driver[] = {
 	.phy_id         = PHY_ID_VSC7388,
 	.name           = "Vitesse VSC7388",
 	.phy_id_mask    = 0x000ffff0,
-	.features       = PHY_GBIT_FEATURES,
 	.config_init    = vsc738x_config_init,
 	.config_aneg    = vsc73xx_config_aneg,
 	.read_page      = vsc73xx_read_page,
@@ -451,7 +444,6 @@  static struct phy_driver vsc82xx_driver[] = {
 	.phy_id         = PHY_ID_VSC7395,
 	.name           = "Vitesse VSC7395",
 	.phy_id_mask    = 0x000ffff0,
-	.features       = PHY_GBIT_FEATURES,
 	.config_init    = vsc739x_config_init,
 	.config_aneg    = vsc73xx_config_aneg,
 	.read_page      = vsc73xx_read_page,
@@ -460,7 +452,6 @@  static struct phy_driver vsc82xx_driver[] = {
 	.phy_id         = PHY_ID_VSC7398,
 	.name           = "Vitesse VSC7398",
 	.phy_id_mask    = 0x000ffff0,
-	.features       = PHY_GBIT_FEATURES,
 	.config_init    = vsc739x_config_init,
 	.config_aneg    = vsc73xx_config_aneg,
 	.read_page      = vsc73xx_read_page,
@@ -469,7 +460,6 @@  static struct phy_driver vsc82xx_driver[] = {
 	.phy_id         = PHY_ID_VSC8662,
 	.name           = "Vitesse VSC8662",
 	.phy_id_mask    = 0x000ffff0,
-	.features       = PHY_GBIT_FEATURES,
 	.config_init    = &vsc824x_config_init,
 	.config_aneg    = &vsc82x4_config_aneg,
 	.ack_interrupt  = &vsc824x_ack_interrupt,
@@ -479,7 +469,6 @@  static struct phy_driver vsc82xx_driver[] = {
 	.phy_id		= PHY_ID_VSC8221,
 	.phy_id_mask	= 0x000ffff0,
 	.name		= "Vitesse VSC8221",
-	.features	= PHY_GBIT_FEATURES,
 	.config_init	= &vsc8221_config_init,
 	.ack_interrupt	= &vsc824x_ack_interrupt,
 	.config_intr	= &vsc82xx_config_intr,
@@ -488,7 +477,6 @@  static struct phy_driver vsc82xx_driver[] = {
 	.phy_id		= PHY_ID_VSC8211,
 	.phy_id_mask	= 0x000ffff0,
 	.name		= "Vitesse VSC8211",
-	.features	= PHY_GBIT_FEATURES,
 	.config_init	= &vsc8221_config_init,
 	.ack_interrupt	= &vsc824x_ack_interrupt,
 	.config_intr	= &vsc82xx_config_intr,