mbox series

[v3,00/11] Add support for Orange Pi 3

Message ID 20190411101951.30223-1-megous@megous.com (mailing list archive)
Headers show
Series Add support for Orange Pi 3 | expand

Message

Ondřej Jirman April 11, 2019, 10:19 a.m. UTC
From: Ondrej Jirman <megous@megous.com>

This series implements support for Xunlong Orange Pi 3 board.

Unfortunately, this board needs some small driver patches, so I have
split the boards DT patch into chunks that require patches for drivers
in various subsystems.

Suggested merging plan/dependencies:

- Pinctrl and stmmac patches are needed for ethernet support.
  (patches 1-5)
- HDMI support was changed, please review. (patches 6-8)
- brcmfmac patch 9, fixing firmware file selection, can be merged
  now, after review, as it doesn't depend on anything (please
  review :))
- mmc1 pinconf (patch 10) can probably be merged now, too (it will
  certainly be used soon by all the other WiFi featuring boards
  based on H6)
- WiFi dts patch will have to wait for H6 RTC patches, which in turn
  depend on ChenYu's RTC series, to be merged. That will take a
  while yet. I'm just keeping it in the series for completness.
  (patch 11)

This patch is also needed to not get segfault on boot (it was already
merged): 
  https://lkml.org/lkml/2019/4/5/856

Changes in v2:
- added dt-bindings documentation for the board's compatible string
  (suggested by Clement)
- addressed checkpatch warnings and code formatting issues (on Maxime's
  suggestions)
- stmmac: dropped useless parenthesis, reworded description of the patch
  (suggested by Sergei)
- drop useles dev_info() about the selected io bias voltage
- docummented io voltage bias selection variant macros
- wifi: marked WiFi DTS patch and realted mmc1_pins as "DO NOT MERGE",
  because wifi depends on H6 RTC support that's not merged yet (suggested
  by Clement)
- added missing signed-of-bys
- changed &usb2otg dr_mode to otg, and added a note about VBUS
- improved wording of HDMI driver's DDC power supply patch

Changes in v3:
- dropped already applied patches
- changed pinctrl I/O bias selection constants to enum and renamed
- added /omit-if-no-ref/ to mmc1_pins
- made mmc1_pins default pinconf for mmc1 in H6 dtsi
- move ddc-supply to HDMI connector node, updated patch descriptions,
  changed dt-bindings docs

Please take a look.

thank you and regards,
  Ondrej Jirman

Icenowy Zheng (2):
  net: stmmac: sun8i: add support for Allwinner H6 EMAC
  net: stmmac: sun8i: force select external PHY when no internal one

Ondrej Jirman (9):
  pinctrl: sunxi: Prepare for alternative bias voltage setting methods
  pinctrl: sunxi: Support I/O bias voltage setting on H6
  arm64: dts: allwinner: orange-pi-3: Enable ethernet
  dt-bindings: display: hdmi-connector: Add DDC power supply
  drm: sun4i: Add support for enabling DDC I2C bus power to dw_hdmi glue
  arm64: dts: allwinner: orange-pi-3: Enable HDMI output
  brcmfmac: Loading the correct firmware for brcm43456
  arm64: dts: allwinner: h6: Add MMC1 pins
  [DO NOT MERGE] arm64: dts: allwinner: orange-pi-3: Enable WiFi

 .../display/connector/hdmi-connector.txt      |   1 +
 .../dts/allwinner/sun50i-h6-orangepi-3.dts    | 127 ++++++++++++++++++
 arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi  |  11 ++
 drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c         |  60 ++++++++-
 drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h         |   2 +
 .../net/ethernet/stmicro/stmmac/dwmac-sun8i.c |  21 +++
 .../broadcom/brcm80211/brcmfmac/sdio.c        |   4 +-
 drivers/pinctrl/sunxi/pinctrl-sun50i-h6.c     |   1 +
 drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c     |   2 +-
 drivers/pinctrl/sunxi/pinctrl-sunxi.c         |  56 +++++---
 drivers/pinctrl/sunxi/pinctrl-sunxi.h         |  14 +-
 11 files changed, 275 insertions(+), 24 deletions(-)

Comments

Chen-Yu Tsai April 12, 2019, 11:05 a.m. UTC | #1
On Thu, Apr 11, 2019 at 6:19 PM megous via linux-sunxi
<linux-sunxi@googlegroups.com> wrote:
>
> From: Ondrej Jirman <megous@megous.com>
>
> This series implements support for Xunlong Orange Pi 3 board.
>
> Unfortunately, this board needs some small driver patches, so I have
> split the boards DT patch into chunks that require patches for drivers
> in various subsystems.
>
> Suggested merging plan/dependencies:
>
> - Pinctrl and stmmac patches are needed for ethernet support.
>   (patches 1-5)
> - HDMI support was changed, please review. (patches 6-8)
> - brcmfmac patch 9, fixing firmware file selection, can be merged
>   now, after review, as it doesn't depend on anything (please
>   review :))
> - mmc1 pinconf (patch 10) can probably be merged now, too (it will
>   certainly be used soon by all the other WiFi featuring boards
>   based on H6)
> - WiFi dts patch will have to wait for H6 RTC patches, which in turn
>   depend on ChenYu's RTC series, to be merged. That will take a
>   while yet. I'm just keeping it in the series for completness.
>   (patch 11)

Unfortunately I will not have time to tackle this for the next release.
Furthermore, I'd like to do this after the new clk parenting stuff lands.
Otherwise it's going to be a mess, as the clock tree is a bit convoluted
compared to previous SoCs.

ChenYu
Ondřej Jirman April 12, 2019, 12:10 p.m. UTC | #2
Hello ChenYu,

On Fri, Apr 12, 2019 at 07:05:05PM +0800, Chen-Yu Tsai wrote:
> On Thu, Apr 11, 2019 at 6:19 PM megous via linux-sunxi
> <linux-sunxi@googlegroups.com> wrote:
> >
> > From: Ondrej Jirman <megous@megous.com>
> >
> > This series implements support for Xunlong Orange Pi 3 board.
> >
> > Unfortunately, this board needs some small driver patches, so I have
> > split the boards DT patch into chunks that require patches for drivers
> > in various subsystems.
> >
> > Suggested merging plan/dependencies:
> >
> > - Pinctrl and stmmac patches are needed for ethernet support.
> >   (patches 1-5)
> > - HDMI support was changed, please review. (patches 6-8)
> > - brcmfmac patch 9, fixing firmware file selection, can be merged
> >   now, after review, as it doesn't depend on anything (please
> >   review :))
> > - mmc1 pinconf (patch 10) can probably be merged now, too (it will
> >   certainly be used soon by all the other WiFi featuring boards
> >   based on H6)
> > - WiFi dts patch will have to wait for H6 RTC patches, which in turn
> >   depend on ChenYu's RTC series, to be merged. That will take a
> >   while yet. I'm just keeping it in the series for completness.
> >   (patch 11)
> 
> Unfortunately I will not have time to tackle this for the next release.
> Furthermore, I'd like to do this after the new clk parenting stuff lands.
> Otherwise it's going to be a mess, as the clock tree is a bit convoluted
> compared to previous SoCs.

I've sent out a patch series that addresses part of that for now.

So perhaps we can start with that and incrementally get to a full support,
of H6's complexities around clocks managed by RTC.

thanks,
	o.

> ChenYu
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel