| Message ID | 20190413082748.29990-1-andrew.smirnov@gmail.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | QorIQ TMU multi-sensor and HWMON support | expand |
Series is: Tested-by: Lucas Stach <l.stach@pengutronix.de> Regards, Lucas Am Samstag, den 13.04.2019, 01:27 -0700 schrieb Andrey Smirnov: > Everyone: > > This series contains patches adding support for HWMON integration, bug > fixes and general improvements (hopefully) for TMU driver I made while > working on it on i.MX8MQ. > > Feedback is welcome! > > Thanks, > Andrey Smirnov > > Changes since [v3] > > - Series reabse on top of [rfc] > > - Fixed incorrect goto label in "thermal: qoriq: Pass data to > qoriq_tmu_calibration()" > > - Added REGS_TRITSR() register description to "thermal: qoriq: Do > not report invalid temperature reading" > > - Reworded commit message of "thermal: qoriq: Remove unnecessary > DT node is NULL check" > > Changes since [v2] > > - Patches rebased on v5.1-rc1 > > Changes since [v1] > > - Rebased on "linus" branch of > git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal.git > that included latest chagnes adding multi-sensors support > > - Dropped > > thermal: qoriq: Add support for multiple thremal sites > thermal: qoriq: Be more strict when parsing > thermal: qoriq: Simplify error handling in qoriq_tmu_get_sensor_id() > > since they are no longer relevant > > - Added > > thermal: qoriq: Don't store struct thermal_zone_device reference > thermal: qoriq: Add local struct qoriq_sensor pointer > thermal: qoriq: Embed per-sensor data into struct qoriq_tmu_data > thermal: qoriq: Pass data to qoriq_tmu_register_tmu_zone() directly > > to simplify latest codebase > > - Changed "thermal: qoriq: Do not report invalid temperature > reading" to use regmap_read_poll_timeout() to make sure that > tmu_get_temp() waits for fist sample to be ready before > reporting it. This case is triggered on my setup if > qoriq_thermal is compiled as a module > > [v1] lore.kernel.org/lkml/20190218191141.3729-1-andrew.smirnov@gmail.com > [v2] lore.kernel.org/lkml/20190222200508.26325-1-andrew.smirnov@gmail.com > [v3] lore.kernel.org/lkml/20190401041418.5999-1-andrew.smirnov@gmail.com > [rfc] lore.kernel.org/lkml/20190404080647.8173-1-daniel.lezcano@linaro.org > > Andrey Smirnov (12): > thermal: qoriq: Remove unnecessary DT node is NULL check > thermal: qoriq: Add local struct device pointer > thermal: qoriq: Don't store struct thermal_zone_device reference > thermal: qoriq: Drop per-sensor data > thermal: qoriq: Pass data to qoriq_tmu_register_tmu_zone() directly > thermal: qoriq: Pass data to qoriq_tmu_calibration() directly > thermal: qoriq: Convert driver to use devm_ioremap() > thermal: qoriq: Convert driver to use regmap API > thermal: qoriq: Enable all sensors before registering them > thermal: qoriq: Do not report invalid temperature reading > thermal_hwmon: Add devres wrapper for thermal_add_hwmon_sysfs() > thermal: qoriq: Add hwmon support > > drivers/thermal/qoriq_thermal.c | 287 +++++++++++++++----------------- > drivers/thermal/thermal_hwmon.c | 28 ++++ > drivers/thermal/thermal_hwmon.h | 7 + > 3 files changed, 171 insertions(+), 151 deletions(-) >
Everyone: This series contains patches adding support for HWMON integration, bug fixes and general improvements (hopefully) for TMU driver I made while working on it on i.MX8MQ. Feedback is welcome! Thanks, Andrey Smirnov Changes since [v3] - Series reabse on top of [rfc] - Fixed incorrect goto label in "thermal: qoriq: Pass data to qoriq_tmu_calibration()" - Added REGS_TRITSR() register description to "thermal: qoriq: Do not report invalid temperature reading" - Reworded commit message of "thermal: qoriq: Remove unnecessary DT node is NULL check" Changes since [v2] - Patches rebased on v5.1-rc1 Changes since [v1] - Rebased on "linus" branch of git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal.git that included latest chagnes adding multi-sensors support - Dropped thermal: qoriq: Add support for multiple thremal sites thermal: qoriq: Be more strict when parsing thermal: qoriq: Simplify error handling in qoriq_tmu_get_sensor_id() since they are no longer relevant - Added thermal: qoriq: Don't store struct thermal_zone_device reference thermal: qoriq: Add local struct qoriq_sensor pointer thermal: qoriq: Embed per-sensor data into struct qoriq_tmu_data thermal: qoriq: Pass data to qoriq_tmu_register_tmu_zone() directly to simplify latest codebase - Changed "thermal: qoriq: Do not report invalid temperature reading" to use regmap_read_poll_timeout() to make sure that tmu_get_temp() waits for fist sample to be ready before reporting it. This case is triggered on my setup if qoriq_thermal is compiled as a module [v1] lore.kernel.org/lkml/20190218191141.3729-1-andrew.smirnov@gmail.com [v2] lore.kernel.org/lkml/20190222200508.26325-1-andrew.smirnov@gmail.com [v3] lore.kernel.org/lkml/20190401041418.5999-1-andrew.smirnov@gmail.com [rfc] lore.kernel.org/lkml/20190404080647.8173-1-daniel.lezcano@linaro.org Andrey Smirnov (12): thermal: qoriq: Remove unnecessary DT node is NULL check thermal: qoriq: Add local struct device pointer thermal: qoriq: Don't store struct thermal_zone_device reference thermal: qoriq: Drop per-sensor data thermal: qoriq: Pass data to qoriq_tmu_register_tmu_zone() directly thermal: qoriq: Pass data to qoriq_tmu_calibration() directly thermal: qoriq: Convert driver to use devm_ioremap() thermal: qoriq: Convert driver to use regmap API thermal: qoriq: Enable all sensors before registering them thermal: qoriq: Do not report invalid temperature reading thermal_hwmon: Add devres wrapper for thermal_add_hwmon_sysfs() thermal: qoriq: Add hwmon support drivers/thermal/qoriq_thermal.c | 287 +++++++++++++++----------------- drivers/thermal/thermal_hwmon.c | 28 ++++ drivers/thermal/thermal_hwmon.h | 7 + 3 files changed, 171 insertions(+), 151 deletions(-)