| Message ID | 1555407487-35394-4-git-send-email-biju.das@bp.renesas.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add USB3.0 and TI HD3SS3220 driver support | expand |
On Tue, Apr 16, 2019 at 10:38:03AM +0100, Biju Das wrote: > Driver for TI HD3SS3220 USB Type-C DRP port controller. > > The driver currently registers the port and supports data role swapping. > > Signed-off-by: Biju Das <biju.das@bp.renesas.com> It's too bad they call it "port controller" even though it's not Port Controller Interface compliant. I put a few minor nitpicks below. Otherwise this looks okay to me, so if there are no other comments: Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> > --- > Note: This patch has compilation dependency on > https://patchwork.kernel.org/patch/10882555/ > > V3-->V4 > * Incorporated Chunfeng Yun's review comment > * Used fwnode API's to get usb role switch handle. > > V2-->V3 > * Used the new api "usb_role_switch by node" for getting > remote endpoint associated with Type-C USB DRP port > controller devices. > V1-->V2 > * Driver uses usb role class instead of extcon for dual role switch > and also handles connect/disconnect events. > --- > drivers/usb/typec/Kconfig | 10 ++ > drivers/usb/typec/Makefile | 1 + > drivers/usb/typec/hd3ss3220.c | 263 ++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 274 insertions(+) > create mode 100644 drivers/usb/typec/hd3ss3220.c > > diff --git a/drivers/usb/typec/Kconfig b/drivers/usb/typec/Kconfig > index 89d9193..92a3717 100644 > --- a/drivers/usb/typec/Kconfig > +++ b/drivers/usb/typec/Kconfig > @@ -50,6 +50,16 @@ source "drivers/usb/typec/tcpm/Kconfig" > > source "drivers/usb/typec/ucsi/Kconfig" > > +config TYPEC_HD3SS3220 > + tristate "TI HD3SS3220 Type-C DRP Port controller driver" > + depends on I2C > + help > + Say Y or M here if your system has TI HD3SS3220 Type-C DRP Port > + controller driver. > + > + If you choose to build this driver as a dynamically linked module, the > + module will be called hd3ss3220.ko. > + > config TYPEC_TPS6598X > tristate "TI TPS6598x USB Power Delivery controller driver" > depends on I2C > diff --git a/drivers/usb/typec/Makefile b/drivers/usb/typec/Makefile > index 6696b72..7753a5c3 100644 > --- a/drivers/usb/typec/Makefile > +++ b/drivers/usb/typec/Makefile > @@ -4,5 +4,6 @@ typec-y := class.o mux.o bus.o > obj-$(CONFIG_TYPEC) += altmodes/ > obj-$(CONFIG_TYPEC_TCPM) += tcpm/ > obj-$(CONFIG_TYPEC_UCSI) += ucsi/ > +obj-$(CONFIG_TYPEC_HD3SS3220) += hd3ss3220.o > obj-$(CONFIG_TYPEC_TPS6598X) += tps6598x.o > obj-$(CONFIG_TYPEC) += mux/ > diff --git a/drivers/usb/typec/hd3ss3220.c b/drivers/usb/typec/hd3ss3220.c > new file mode 100644 > index 0000000..e98a38f > --- /dev/null > +++ b/drivers/usb/typec/hd3ss3220.c > @@ -0,0 +1,263 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * TI HD3SS3220 Type-C DRP Port Controller Driver > + * > + * Copyright (C) 2019 Renesas Electronics Corp. > + */ > + > +#include <linux/module.h> > +#include <linux/i2c.h> > +#include <linux/usb/role.h> > +#include <linux/irqreturn.h> > +#include <linux/interrupt.h> > +#include <linux/module.h> > +#include <linux/regmap.h> > +#include <linux/slab.h> > +#include <linux/usb/typec.h> > +#include <linux/delay.h> > + > +#define HD3SS3220_REG_CN_STAT_CTRL 0x09 > +#define HD3SS3220_REG_GEN_CTRL 0x0A > +#define HD3SS3220_REG_DEV_REV 0xA0 > + > +/* Register HD3SS3220_REG_CN_STAT_CTRL*/ > +#define HD3SS3220_REG_CN_STAT_CTRL_ATTACHED_STATE_MASK (BIT(7) | BIT(6)) > +#define HD3SS3220_REG_CN_STAT_CTRL_AS_DFP BIT(6) > +#define HD3SS3220_REG_CN_STAT_CTRL_AS_UFP BIT(7) > +#define HD3SS3220_REG_CN_STAT_CTRL_TO_ACCESSORY (BIT(7) | BIT(6)) > +#define HD3SS3220_REG_CN_STAT_CTRL_INT_STATUS BIT(4) > + > +/* Register HD3SS3220_REG_GEN_CTRL*/ > +#define HD3SS3220_REG_GEN_CTRL_SRC_PREF_MASK (BIT(2) | BIT(1)) > +#define HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_DEFAULT 0x00 > +#define HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_TRY_SNK BIT(1) > +#define HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_TRY_SRC (BIT(2) | BIT(1)) > + > +struct hd3ss3220 { > + struct device *dev; > + struct regmap *regmap; > + struct usb_role_switch *role_sw; > + struct typec_port *port; > + struct typec_capability typec_cap; > +}; > + > +static int hd3ss3220_set_source_pref(struct hd3ss3220 *hd3ss3220, int src_pref) > +{ > + return regmap_update_bits(hd3ss3220->regmap, HD3SS3220_REG_GEN_CTRL, > + HD3SS3220_REG_GEN_CTRL_SRC_PREF_MASK, > + src_pref); > +} > + > +static enum usb_role hd3ss3220_get_attached_state(struct hd3ss3220 *hd3ss3220) > +{ > + unsigned int reg_val; > + enum usb_role attached_state; > + int ret; > + > + ret = regmap_read(hd3ss3220->regmap, HD3SS3220_REG_CN_STAT_CTRL, > + ®_val); > + if (ret < 0) > + return ret; > + > + switch (reg_val & HD3SS3220_REG_CN_STAT_CTRL_ATTACHED_STATE_MASK) { > + case HD3SS3220_REG_CN_STAT_CTRL_AS_DFP: > + attached_state = USB_ROLE_HOST; > + break; > + case HD3SS3220_REG_CN_STAT_CTRL_AS_UFP: > + attached_state = USB_ROLE_DEVICE; > + break; It looks like your line indentation has collapsed here. I pretty sure scripts/checkpatch.pl would have found these. > + default: > + attached_state = USB_ROLE_NONE; > + } > + > + return attached_state; > +} > + > +static int hd3ss3220_dr_set(const struct typec_capability *cap, > + enum typec_data_role role) > +{ > + struct hd3ss3220 *hd3ss3220 = container_of(cap, struct hd3ss3220, > + typec_cap); > + enum usb_role role_val; > + int pref, ret = 0; > + > + if (role == TYPEC_HOST) { > + role_val = USB_ROLE_HOST; > + pref = HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_TRY_SRC; > + } else { > + role_val = USB_ROLE_DEVICE; > + pref = HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_TRY_SNK; > + } > + > + ret = hd3ss3220_set_source_pref(hd3ss3220, pref); > + usleep_range(10, 100); > + > + usb_role_switch_set_role(hd3ss3220->role_sw, role_val); > + typec_set_data_role(hd3ss3220->port, role); > + > + return ret; > +} > + > +static void hd3ss3220_set_role(struct hd3ss3220 *hd3ss3220) > +{ > + enum usb_role role_state = hd3ss3220_get_attached_state(hd3ss3220); > + > + usb_role_switch_set_role(hd3ss3220->role_sw, role_state); > + if (role_state == USB_ROLE_NONE) > + hd3ss3220_set_source_pref(hd3ss3220, > + HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_DEFAULT); > + > + switch (role_state) { > + case USB_ROLE_HOST: > + typec_set_data_role(hd3ss3220->port, TYPEC_HOST); > + break; > + case USB_ROLE_DEVICE: > + typec_set_data_role(hd3ss3220->port, TYPEC_DEVICE); > + break; > + default: > + break; > + } > +} > + > +irqreturn_t hd3ss3220_irq(struct hd3ss3220 *hd3ss3220) > +{ > + int err; > + > + hd3ss3220_set_role(hd3ss3220); > + err = regmap_update_bits_base(hd3ss3220->regmap, > + HD3SS3220_REG_CN_STAT_CTRL, > + HD3SS3220_REG_CN_STAT_CTRL_INT_STATUS, > + HD3SS3220_REG_CN_STAT_CTRL_INT_STATUS, > + NULL, false, true); > + if (err < 0) > + return IRQ_NONE; > + > + return IRQ_HANDLED; > +} > + > +static irqreturn_t hd3ss3220_irq_handler(int irq, void *data) > +{ > + struct i2c_client *client = to_i2c_client(data); > + struct hd3ss3220 *hd3ss3220 = i2c_get_clientdata(client); > + > + return hd3ss3220_irq(hd3ss3220); > +} > + > +static const struct regmap_config config = { > + .reg_bits = 8, > + .val_bits = 8, > + .max_register = 0x0A, > +}; > + > +static int hd3ss3220_probe(struct i2c_client *client, > + const struct i2c_device_id *id) > +{ > + struct hd3ss3220 *hd3ss3220; > + struct fwnode_handle *parent, *child; > + int ret; > + unsigned int data; > + > + hd3ss3220 = devm_kzalloc(&client->dev, sizeof(struct hd3ss3220), > + GFP_KERNEL); > + if (!hd3ss3220) > + return -ENOMEM; > + > + i2c_set_clientdata(client, hd3ss3220); > + > + hd3ss3220->dev = &client->dev; > + hd3ss3220->regmap = devm_regmap_init_i2c(client, &config); > + if (IS_ERR(hd3ss3220->regmap)) > + return PTR_ERR(hd3ss3220->regmap); > + > + hd3ss3220_set_source_pref(hd3ss3220, > + HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_DEFAULT); > + child = fwnode_graph_get_next_endpoint(dev_fwnode(hd3ss3220->dev), > + NULL); > + parent = fwnode_graph_get_remote_port_parent(child); > + hd3ss3220->role_sw = fwnode_usb_role_switch_get(parent); > + if (IS_ERR_OR_NULL(hd3ss3220->role_sw)) { > + fwnode_handle_put(child); > + fwnode_handle_put(parent); > + return PTR_ERR(hd3ss3220->role_sw); > + } > + > + fwnode_handle_put(child); > + fwnode_handle_put(parent); > + > + hd3ss3220->typec_cap.prefer_role = TYPEC_NO_PREFERRED_ROLE; > + hd3ss3220->typec_cap.dr_set = hd3ss3220_dr_set; > + hd3ss3220->typec_cap.type = TYPEC_PORT_DRP; > + hd3ss3220->typec_cap.data = TYPEC_PORT_DRD; > + > + hd3ss3220->port = typec_register_port(&client->dev, > + &hd3ss3220->typec_cap); > + if (IS_ERR(hd3ss3220->port)) > + return PTR_ERR(hd3ss3220->port); > + > + hd3ss3220_set_role(hd3ss3220); > + if (client->irq > 0) { > + ret = regmap_read(hd3ss3220->regmap, HD3SS3220_REG_CN_STAT_CTRL, > + &data); > + if (ret < 0) > + goto error; > + > + if (data & HD3SS3220_REG_CN_STAT_CTRL_INT_STATUS) { > + ret = regmap_write(hd3ss3220->regmap, > + HD3SS3220_REG_CN_STAT_CTRL, > + data | HD3SS3220_REG_CN_STAT_CTRL_INT_STATUS); > + if (ret < 0) > + goto error; > + } > + if (data & HD3SS3220_REG_CN_STAT_CTRL_INT_STATUS) { > + ret = regmap_write(hd3ss3220->regmap, > + HD3SS3220_REG_CN_STAT_CTRL, > + data | HD3SS3220_REG_CN_STAT_CTRL_INT_STATUS); > + if (ret < 0) > + goto error; > + } > + > + ret = devm_request_threaded_irq(&client->dev, client->irq, NULL, > + hd3ss3220_irq_handler, > + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, > + "hd3ss3220", &client->dev); > + if (ret) > + goto error; > + } I would move the above if (client->irq > 0) case to it's own function. > + ret = i2c_smbus_read_byte_data(client, HD3SS3220_REG_DEV_REV); > + if (ret < 0) > + goto error; > + > + dev_info(&client->dev, "probed revision=0x%x\n", ret); > + > + return 0; > +error: > + typec_unregister_port(hd3ss3220->port); > + usb_role_switch_put(hd3ss3220->role_sw); > + > + return ret; > +} > + > +static int hd3ss3220_remove(struct i2c_client *client) > +{ > + struct hd3ss3220 *hd3ss3220 = i2c_get_clientdata(client); > + > + typec_unregister_port(hd3ss3220->port); > + usb_role_switch_put(hd3ss3220->role_sw); > + > + return 0; > +} > + > +static const struct of_device_id dev_ids[] = { > + { .compatible = "ti,hd3ss3220"}, > + {} > +}; > +MODULE_DEVICE_TABLE(of, dev_ids); > + > +static struct i2c_driver hd3ss3220_driver = { > + .driver = { > + .name = "hd3ss3220", > + .of_match_table = of_match_ptr(dev_ids), > + }, > + .probe = hd3ss3220_probe, > + .remove = hd3ss3220_remove, > +}; > + > +module_i2c_driver(hd3ss3220_driver); > + > +MODULE_AUTHOR("Biju Das <biju.das@bp.renesas.com>"); > +MODULE_DESCRIPTION("TI HD3SS3220 DRP Port Controller Driver"); > +MODULE_LICENSE("GPL"); > -- > 2.7.4 thanks,
Hi Heikki, Thanks for the feedback. > Subject: Re: [PATCH V4 3/7] usb: typec: driver for TI HD3SS3220 USB Type-C > DRP port controller > > On Tue, Apr 16, 2019 at 10:38:03AM +0100, Biju Das wrote: > > Driver for TI HD3SS3220 USB Type-C DRP port controller. > > > > The driver currently registers the port and supports data role swapping. > > > > Signed-off-by: Biju Das <biju.das@bp.renesas.com> > > It's too bad they call it "port controller" even though it's not Port Controller > Interface compliant. I put a few minor nitpicks below. > Otherwise this looks okay to me, so if there are no other comments: > > Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> > > > --- > > Note: This patch has compilation dependency on > > https://patchwork.kernel.org/patch/10882555/ > > > > V3-->V4 > > * Incorporated Chunfeng Yun's review comment > > * Used fwnode API's to get usb role switch handle. > > > > V2-->V3 > > * Used the new api "usb_role_switch by node" for getting > > remote endpoint associated with Type-C USB DRP port > > controller devices. > > V1-->V2 > > * Driver uses usb role class instead of extcon for dual role switch > > and also handles connect/disconnect events. > > --- > > drivers/usb/typec/Kconfig | 10 ++ > > drivers/usb/typec/Makefile | 1 + > > drivers/usb/typec/hd3ss3220.c | 263 > > ++++++++++++++++++++++++++++++++++++++++++ > > 3 files changed, 274 insertions(+) > > create mode 100644 drivers/usb/typec/hd3ss3220.c > > > > diff --git a/drivers/usb/typec/Kconfig b/drivers/usb/typec/Kconfig > > index 89d9193..92a3717 100644 > > --- a/drivers/usb/typec/Kconfig > > +++ b/drivers/usb/typec/Kconfig > > @@ -50,6 +50,16 @@ source "drivers/usb/typec/tcpm/Kconfig" > > > > source "drivers/usb/typec/ucsi/Kconfig" > > > > +config TYPEC_HD3SS3220 > > + tristate "TI HD3SS3220 Type-C DRP Port controller driver" > > + depends on I2C > > + help > > + Say Y or M here if your system has TI HD3SS3220 Type-C DRP Port > > + controller driver. > > + > > + If you choose to build this driver as a dynamically linked module, the > > + module will be called hd3ss3220.ko. > > + > > config TYPEC_TPS6598X > > tristate "TI TPS6598x USB Power Delivery controller driver" > > depends on I2C > > diff --git a/drivers/usb/typec/Makefile b/drivers/usb/typec/Makefile > > index 6696b72..7753a5c3 100644 > > --- a/drivers/usb/typec/Makefile > > +++ b/drivers/usb/typec/Makefile > > @@ -4,5 +4,6 @@ typec-y := class.o mux.o bus.o > > obj-$(CONFIG_TYPEC) += altmodes/ > > obj-$(CONFIG_TYPEC_TCPM) += tcpm/ > > obj-$(CONFIG_TYPEC_UCSI) += ucsi/ > > +obj-$(CONFIG_TYPEC_HD3SS3220) += hd3ss3220.o > > obj-$(CONFIG_TYPEC_TPS6598X) += tps6598x.o > > obj-$(CONFIG_TYPEC) += mux/ > > diff --git a/drivers/usb/typec/hd3ss3220.c > > b/drivers/usb/typec/hd3ss3220.c new file mode 100644 index > > 0000000..e98a38f > > --- /dev/null > > +++ b/drivers/usb/typec/hd3ss3220.c > > @@ -0,0 +1,263 @@ > > +// SPDX-License-Identifier: GPL-2.0+ > > +/* > > + * TI HD3SS3220 Type-C DRP Port Controller Driver > > + * > > + * Copyright (C) 2019 Renesas Electronics Corp. > > + */ > > + > > +#include <linux/module.h> > > +#include <linux/i2c.h> > > +#include <linux/usb/role.h> > > +#include <linux/irqreturn.h> > > +#include <linux/interrupt.h> > > +#include <linux/module.h> > > +#include <linux/regmap.h> > > +#include <linux/slab.h> > > +#include <linux/usb/typec.h> > > +#include <linux/delay.h> > > + > > +#define HD3SS3220_REG_CN_STAT_CTRL 0x09 > > +#define HD3SS3220_REG_GEN_CTRL 0x0A > > +#define HD3SS3220_REG_DEV_REV 0xA0 > > + > > +/* Register HD3SS3220_REG_CN_STAT_CTRL*/ > > +#define HD3SS3220_REG_CN_STAT_CTRL_ATTACHED_STATE_MASK > (BIT(7) | BIT(6)) > > +#define HD3SS3220_REG_CN_STAT_CTRL_AS_DFP BIT(6) > > +#define HD3SS3220_REG_CN_STAT_CTRL_AS_UFP BIT(7) > > +#define HD3SS3220_REG_CN_STAT_CTRL_TO_ACCESSORY > (BIT(7) | BIT(6)) > > +#define HD3SS3220_REG_CN_STAT_CTRL_INT_STATUS BIT(4) > > + > > +/* Register HD3SS3220_REG_GEN_CTRL*/ > > +#define HD3SS3220_REG_GEN_CTRL_SRC_PREF_MASK > (BIT(2) | BIT(1)) > > +#define HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_DEFAULT 0x00 > > +#define HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_TRY_SNK BIT(1) > > +#define HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_TRY_SRC > (BIT(2) | BIT(1)) > > + > > +struct hd3ss3220 { > > + struct device *dev; > > + struct regmap *regmap; > > + struct usb_role_switch *role_sw; > > + struct typec_port *port; > > + struct typec_capability typec_cap; > > +}; > > + > > +static int hd3ss3220_set_source_pref(struct hd3ss3220 *hd3ss3220, int > > +src_pref) { > > + return regmap_update_bits(hd3ss3220->regmap, > HD3SS3220_REG_GEN_CTRL, > > + > HD3SS3220_REG_GEN_CTRL_SRC_PREF_MASK, > > + src_pref); > > +} > > + > > +static enum usb_role hd3ss3220_get_attached_state(struct hd3ss3220 > > +*hd3ss3220) { > > + unsigned int reg_val; > > + enum usb_role attached_state; > > + int ret; > > + > > + ret = regmap_read(hd3ss3220->regmap, > HD3SS3220_REG_CN_STAT_CTRL, > > + ®_val); > > + if (ret < 0) > > + return ret; > > + > > + switch (reg_val & > HD3SS3220_REG_CN_STAT_CTRL_ATTACHED_STATE_MASK) { > > + case HD3SS3220_REG_CN_STAT_CTRL_AS_DFP: > > + attached_state = USB_ROLE_HOST; > > + break; > > + case HD3SS3220_REG_CN_STAT_CTRL_AS_UFP: > > + attached_state = USB_ROLE_DEVICE; > > + break; > > It looks like your line indentation has collapsed here. I pretty sure > scripts/checkpatch.pl would have found these. OK. Will fix this in V5. I have ran Check patch before sending the patch and it didn't complain this. > > + default: > > + attached_state = USB_ROLE_NONE; > > + } > > + > > + return attached_state; > > +} > > + > > +static int hd3ss3220_dr_set(const struct typec_capability *cap, > > + enum typec_data_role role) > > +{ > > + struct hd3ss3220 *hd3ss3220 = container_of(cap, struct hd3ss3220, > > + typec_cap); > > + enum usb_role role_val; > > + int pref, ret = 0; > > + > > + if (role == TYPEC_HOST) { > > + role_val = USB_ROLE_HOST; > > + pref = > HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_TRY_SRC; > > + } else { > > + role_val = USB_ROLE_DEVICE; > > + pref = > HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_TRY_SNK; > > + } > > + > > + ret = hd3ss3220_set_source_pref(hd3ss3220, pref); > > + usleep_range(10, 100); > > + > > + usb_role_switch_set_role(hd3ss3220->role_sw, role_val); > > + typec_set_data_role(hd3ss3220->port, role); > > + > > + return ret; > > +} > > + > > +static void hd3ss3220_set_role(struct hd3ss3220 *hd3ss3220) { > > + enum usb_role role_state = > hd3ss3220_get_attached_state(hd3ss3220); > > + > > + usb_role_switch_set_role(hd3ss3220->role_sw, role_state); > > + if (role_state == USB_ROLE_NONE) > > + hd3ss3220_set_source_pref(hd3ss3220, > > + > HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_DEFAULT); > > + > > + switch (role_state) { > > + case USB_ROLE_HOST: > > + typec_set_data_role(hd3ss3220->port, TYPEC_HOST); > > + break; > > + case USB_ROLE_DEVICE: > > + typec_set_data_role(hd3ss3220->port, TYPEC_DEVICE); > > + break; > > + default: > > + break; > > + } > > +} > > + > > +irqreturn_t hd3ss3220_irq(struct hd3ss3220 *hd3ss3220) { > > + int err; > > + > > + hd3ss3220_set_role(hd3ss3220); > > + err = regmap_update_bits_base(hd3ss3220->regmap, > > + HD3SS3220_REG_CN_STAT_CTRL, > > + > HD3SS3220_REG_CN_STAT_CTRL_INT_STATUS, > > + > HD3SS3220_REG_CN_STAT_CTRL_INT_STATUS, > > + NULL, false, true); > > + if (err < 0) > > + return IRQ_NONE; > > + > > + return IRQ_HANDLED; > > +} > > + > > +static irqreturn_t hd3ss3220_irq_handler(int irq, void *data) { > > + struct i2c_client *client = to_i2c_client(data); > > + struct hd3ss3220 *hd3ss3220 = i2c_get_clientdata(client); > > + > > + return hd3ss3220_irq(hd3ss3220); > > +} > > + > > +static const struct regmap_config config = { > > + .reg_bits = 8, > > + .val_bits = 8, > > + .max_register = 0x0A, > > +}; > > + > > +static int hd3ss3220_probe(struct i2c_client *client, > > + const struct i2c_device_id *id) > > +{ > > + struct hd3ss3220 *hd3ss3220; > > + struct fwnode_handle *parent, *child; > > + int ret; > > + unsigned int data; > > + > > + hd3ss3220 = devm_kzalloc(&client->dev, sizeof(struct hd3ss3220), > > + GFP_KERNEL); > > + if (!hd3ss3220) > > + return -ENOMEM; > > + > > + i2c_set_clientdata(client, hd3ss3220); > > + > > + hd3ss3220->dev = &client->dev; > > + hd3ss3220->regmap = devm_regmap_init_i2c(client, &config); > > + if (IS_ERR(hd3ss3220->regmap)) > > + return PTR_ERR(hd3ss3220->regmap); > > + > > + hd3ss3220_set_source_pref(hd3ss3220, > > + > HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_DEFAULT); > > + child = fwnode_graph_get_next_endpoint(dev_fwnode(hd3ss3220- > >dev), > > + NULL); > > + parent = fwnode_graph_get_remote_port_parent(child); > > + hd3ss3220->role_sw = fwnode_usb_role_switch_get(parent); > > + if (IS_ERR_OR_NULL(hd3ss3220->role_sw)) { > > + fwnode_handle_put(child); > > + fwnode_handle_put(parent); > > + return PTR_ERR(hd3ss3220->role_sw); > > + } > > + > > + fwnode_handle_put(child); > > + fwnode_handle_put(parent); > > + > > + hd3ss3220->typec_cap.prefer_role = TYPEC_NO_PREFERRED_ROLE; > > + hd3ss3220->typec_cap.dr_set = hd3ss3220_dr_set; > > + hd3ss3220->typec_cap.type = TYPEC_PORT_DRP; > > + hd3ss3220->typec_cap.data = TYPEC_PORT_DRD; > > + > > + hd3ss3220->port = typec_register_port(&client->dev, > > + &hd3ss3220->typec_cap); > > + if (IS_ERR(hd3ss3220->port)) > > + return PTR_ERR(hd3ss3220->port); > > + > > + hd3ss3220_set_role(hd3ss3220); > > + if (client->irq > 0) { > > + ret = regmap_read(hd3ss3220->regmap, > HD3SS3220_REG_CN_STAT_CTRL, > > + &data); > > + if (ret < 0) > > + goto error; > > + > > + if (data & HD3SS3220_REG_CN_STAT_CTRL_INT_STATUS) { > > + ret = regmap_write(hd3ss3220->regmap, > > + HD3SS3220_REG_CN_STAT_CTRL, > > + data | > HD3SS3220_REG_CN_STAT_CTRL_INT_STATUS); > > + if (ret < 0) > > + goto error; > > + } > > + if (data & HD3SS3220_REG_CN_STAT_CTRL_INT_STATUS) { > > + ret = regmap_write(hd3ss3220->regmap, > > + HD3SS3220_REG_CN_STAT_CTRL, > > + data | > HD3SS3220_REG_CN_STAT_CTRL_INT_STATUS); > > + if (ret < 0) > > + goto error; > > + } > > + > > + ret = devm_request_threaded_irq(&client->dev, client->irq, > NULL, > > + hd3ss3220_irq_handler, > > + IRQF_TRIGGER_FALLING | > IRQF_ONESHOT, > > + "hd3ss3220", &client->dev); > > + if (ret) > > + goto error; > > + } > > I would move the above if (client->irq > 0) case to it's own function. OK. Will fix this in V5. Regards, Biju > > + ret = i2c_smbus_read_byte_data(client, HD3SS3220_REG_DEV_REV); > > + if (ret < 0) > > + goto error; > > + > > + dev_info(&client->dev, "probed revision=0x%x\n", ret); > > + > > + return 0; > > +error: > > + typec_unregister_port(hd3ss3220->port); > > + usb_role_switch_put(hd3ss3220->role_sw); > > + > > + return ret; > > +} > > + > > +static int hd3ss3220_remove(struct i2c_client *client) { > > + struct hd3ss3220 *hd3ss3220 = i2c_get_clientdata(client); > > + > > + typec_unregister_port(hd3ss3220->port); > > + usb_role_switch_put(hd3ss3220->role_sw); > > + > > + return 0; > > +} > > + > > +static const struct of_device_id dev_ids[] = { > > + { .compatible = "ti,hd3ss3220"}, > > + {} > > +}; > > +MODULE_DEVICE_TABLE(of, dev_ids); > > + > > +static struct i2c_driver hd3ss3220_driver = { > > + .driver = { > > + .name = "hd3ss3220", > > + .of_match_table = of_match_ptr(dev_ids), > > + }, > > + .probe = hd3ss3220_probe, > > + .remove = hd3ss3220_remove, > > +}; > > + > > +module_i2c_driver(hd3ss3220_driver); > > + > > +MODULE_AUTHOR("Biju Das <biju.das@bp.renesas.com>"); > > +MODULE_DESCRIPTION("TI HD3SS3220 DRP Port Controller Driver"); > > +MODULE_LICENSE("GPL"); > > -- > > 2.7.4 > > thanks, > > -- > heikki
diff --git a/drivers/usb/typec/Kconfig b/drivers/usb/typec/Kconfig index 89d9193..92a3717 100644 --- a/drivers/usb/typec/Kconfig +++ b/drivers/usb/typec/Kconfig @@ -50,6 +50,16 @@ source "drivers/usb/typec/tcpm/Kconfig" source "drivers/usb/typec/ucsi/Kconfig" +config TYPEC_HD3SS3220 + tristate "TI HD3SS3220 Type-C DRP Port controller driver" + depends on I2C + help + Say Y or M here if your system has TI HD3SS3220 Type-C DRP Port + controller driver. + + If you choose to build this driver as a dynamically linked module, the + module will be called hd3ss3220.ko. + config TYPEC_TPS6598X tristate "TI TPS6598x USB Power Delivery controller driver" depends on I2C diff --git a/drivers/usb/typec/Makefile b/drivers/usb/typec/Makefile index 6696b72..7753a5c3 100644 --- a/drivers/usb/typec/Makefile +++ b/drivers/usb/typec/Makefile @@ -4,5 +4,6 @@ typec-y := class.o mux.o bus.o obj-$(CONFIG_TYPEC) += altmodes/ obj-$(CONFIG_TYPEC_TCPM) += tcpm/ obj-$(CONFIG_TYPEC_UCSI) += ucsi/ +obj-$(CONFIG_TYPEC_HD3SS3220) += hd3ss3220.o obj-$(CONFIG_TYPEC_TPS6598X) += tps6598x.o obj-$(CONFIG_TYPEC) += mux/ diff --git a/drivers/usb/typec/hd3ss3220.c b/drivers/usb/typec/hd3ss3220.c new file mode 100644 index 0000000..e98a38f --- /dev/null +++ b/drivers/usb/typec/hd3ss3220.c @@ -0,0 +1,263 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * TI HD3SS3220 Type-C DRP Port Controller Driver + * + * Copyright (C) 2019 Renesas Electronics Corp. + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/usb/role.h> +#include <linux/irqreturn.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <linux/usb/typec.h> +#include <linux/delay.h> + +#define HD3SS3220_REG_CN_STAT_CTRL 0x09 +#define HD3SS3220_REG_GEN_CTRL 0x0A +#define HD3SS3220_REG_DEV_REV 0xA0 + +/* Register HD3SS3220_REG_CN_STAT_CTRL*/ +#define HD3SS3220_REG_CN_STAT_CTRL_ATTACHED_STATE_MASK (BIT(7) | BIT(6)) +#define HD3SS3220_REG_CN_STAT_CTRL_AS_DFP BIT(6) +#define HD3SS3220_REG_CN_STAT_CTRL_AS_UFP BIT(7) +#define HD3SS3220_REG_CN_STAT_CTRL_TO_ACCESSORY (BIT(7) | BIT(6)) +#define HD3SS3220_REG_CN_STAT_CTRL_INT_STATUS BIT(4) + +/* Register HD3SS3220_REG_GEN_CTRL*/ +#define HD3SS3220_REG_GEN_CTRL_SRC_PREF_MASK (BIT(2) | BIT(1)) +#define HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_DEFAULT 0x00 +#define HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_TRY_SNK BIT(1) +#define HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_TRY_SRC (BIT(2) | BIT(1)) + +struct hd3ss3220 { + struct device *dev; + struct regmap *regmap; + struct usb_role_switch *role_sw; + struct typec_port *port; + struct typec_capability typec_cap; +}; + +static int hd3ss3220_set_source_pref(struct hd3ss3220 *hd3ss3220, int src_pref) +{ + return regmap_update_bits(hd3ss3220->regmap, HD3SS3220_REG_GEN_CTRL, + HD3SS3220_REG_GEN_CTRL_SRC_PREF_MASK, + src_pref); +} + +static enum usb_role hd3ss3220_get_attached_state(struct hd3ss3220 *hd3ss3220) +{ + unsigned int reg_val; + enum usb_role attached_state; + int ret; + + ret = regmap_read(hd3ss3220->regmap, HD3SS3220_REG_CN_STAT_CTRL, + ®_val); + if (ret < 0) + return ret; + + switch (reg_val & HD3SS3220_REG_CN_STAT_CTRL_ATTACHED_STATE_MASK) { + case HD3SS3220_REG_CN_STAT_CTRL_AS_DFP: + attached_state = USB_ROLE_HOST; + break; + case HD3SS3220_REG_CN_STAT_CTRL_AS_UFP: + attached_state = USB_ROLE_DEVICE; + break; + default: + attached_state = USB_ROLE_NONE; + } + + return attached_state; +} + +static int hd3ss3220_dr_set(const struct typec_capability *cap, + enum typec_data_role role) +{ + struct hd3ss3220 *hd3ss3220 = container_of(cap, struct hd3ss3220, + typec_cap); + enum usb_role role_val; + int pref, ret = 0; + + if (role == TYPEC_HOST) { + role_val = USB_ROLE_HOST; + pref = HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_TRY_SRC; + } else { + role_val = USB_ROLE_DEVICE; + pref = HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_TRY_SNK; + } + + ret = hd3ss3220_set_source_pref(hd3ss3220, pref); + usleep_range(10, 100); + + usb_role_switch_set_role(hd3ss3220->role_sw, role_val); + typec_set_data_role(hd3ss3220->port, role); + + return ret; +} + +static void hd3ss3220_set_role(struct hd3ss3220 *hd3ss3220) +{ + enum usb_role role_state = hd3ss3220_get_attached_state(hd3ss3220); + + usb_role_switch_set_role(hd3ss3220->role_sw, role_state); + if (role_state == USB_ROLE_NONE) + hd3ss3220_set_source_pref(hd3ss3220, + HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_DEFAULT); + + switch (role_state) { + case USB_ROLE_HOST: + typec_set_data_role(hd3ss3220->port, TYPEC_HOST); + break; + case USB_ROLE_DEVICE: + typec_set_data_role(hd3ss3220->port, TYPEC_DEVICE); + break; + default: + break; + } +} + +irqreturn_t hd3ss3220_irq(struct hd3ss3220 *hd3ss3220) +{ + int err; + + hd3ss3220_set_role(hd3ss3220); + err = regmap_update_bits_base(hd3ss3220->regmap, + HD3SS3220_REG_CN_STAT_CTRL, + HD3SS3220_REG_CN_STAT_CTRL_INT_STATUS, + HD3SS3220_REG_CN_STAT_CTRL_INT_STATUS, + NULL, false, true); + if (err < 0) + return IRQ_NONE; + + return IRQ_HANDLED; +} + +static irqreturn_t hd3ss3220_irq_handler(int irq, void *data) +{ + struct i2c_client *client = to_i2c_client(data); + struct hd3ss3220 *hd3ss3220 = i2c_get_clientdata(client); + + return hd3ss3220_irq(hd3ss3220); +} + +static const struct regmap_config config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = 0x0A, +}; + +static int hd3ss3220_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct hd3ss3220 *hd3ss3220; + struct fwnode_handle *parent, *child; + int ret; + unsigned int data; + + hd3ss3220 = devm_kzalloc(&client->dev, sizeof(struct hd3ss3220), + GFP_KERNEL); + if (!hd3ss3220) + return -ENOMEM; + + i2c_set_clientdata(client, hd3ss3220); + + hd3ss3220->dev = &client->dev; + hd3ss3220->regmap = devm_regmap_init_i2c(client, &config); + if (IS_ERR(hd3ss3220->regmap)) + return PTR_ERR(hd3ss3220->regmap); + + hd3ss3220_set_source_pref(hd3ss3220, + HD3SS3220_REG_GEN_CTRL_SRC_PREF_DRP_DEFAULT); + child = fwnode_graph_get_next_endpoint(dev_fwnode(hd3ss3220->dev), + NULL); + parent = fwnode_graph_get_remote_port_parent(child); + hd3ss3220->role_sw = fwnode_usb_role_switch_get(parent); + if (IS_ERR_OR_NULL(hd3ss3220->role_sw)) { + fwnode_handle_put(child); + fwnode_handle_put(parent); + return PTR_ERR(hd3ss3220->role_sw); + } + + fwnode_handle_put(child); + fwnode_handle_put(parent); + + hd3ss3220->typec_cap.prefer_role = TYPEC_NO_PREFERRED_ROLE; + hd3ss3220->typec_cap.dr_set = hd3ss3220_dr_set; + hd3ss3220->typec_cap.type = TYPEC_PORT_DRP; + hd3ss3220->typec_cap.data = TYPEC_PORT_DRD; + + hd3ss3220->port = typec_register_port(&client->dev, + &hd3ss3220->typec_cap); + if (IS_ERR(hd3ss3220->port)) + return PTR_ERR(hd3ss3220->port); + + hd3ss3220_set_role(hd3ss3220); + if (client->irq > 0) { + ret = regmap_read(hd3ss3220->regmap, HD3SS3220_REG_CN_STAT_CTRL, + &data); + if (ret < 0) + goto error; + + if (data & HD3SS3220_REG_CN_STAT_CTRL_INT_STATUS) { + ret = regmap_write(hd3ss3220->regmap, + HD3SS3220_REG_CN_STAT_CTRL, + data | HD3SS3220_REG_CN_STAT_CTRL_INT_STATUS); + if (ret < 0) + goto error; + } + + ret = devm_request_threaded_irq(&client->dev, client->irq, NULL, + hd3ss3220_irq_handler, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + "hd3ss3220", &client->dev); + if (ret) + goto error; + } + + ret = i2c_smbus_read_byte_data(client, HD3SS3220_REG_DEV_REV); + if (ret < 0) + goto error; + + dev_info(&client->dev, "probed revision=0x%x\n", ret); + + return 0; +error: + typec_unregister_port(hd3ss3220->port); + usb_role_switch_put(hd3ss3220->role_sw); + + return ret; +} + +static int hd3ss3220_remove(struct i2c_client *client) +{ + struct hd3ss3220 *hd3ss3220 = i2c_get_clientdata(client); + + typec_unregister_port(hd3ss3220->port); + usb_role_switch_put(hd3ss3220->role_sw); + + return 0; +} + +static const struct of_device_id dev_ids[] = { + { .compatible = "ti,hd3ss3220"}, + {} +}; +MODULE_DEVICE_TABLE(of, dev_ids); + +static struct i2c_driver hd3ss3220_driver = { + .driver = { + .name = "hd3ss3220", + .of_match_table = of_match_ptr(dev_ids), + }, + .probe = hd3ss3220_probe, + .remove = hd3ss3220_remove, +}; + +module_i2c_driver(hd3ss3220_driver); + +MODULE_AUTHOR("Biju Das <biju.das@bp.renesas.com>"); +MODULE_DESCRIPTION("TI HD3SS3220 DRP Port Controller Driver"); +MODULE_LICENSE("GPL");
Driver for TI HD3SS3220 USB Type-C DRP port controller. The driver currently registers the port and supports data role swapping. Signed-off-by: Biju Das <biju.das@bp.renesas.com> --- Note: This patch has compilation dependency on https://patchwork.kernel.org/patch/10882555/ V3-->V4 * Incorporated Chunfeng Yun's review comment * Used fwnode API's to get usb role switch handle. V2-->V3 * Used the new api "usb_role_switch by node" for getting remote endpoint associated with Type-C USB DRP port controller devices. V1-->V2 * Driver uses usb role class instead of extcon for dual role switch and also handles connect/disconnect events. --- drivers/usb/typec/Kconfig | 10 ++ drivers/usb/typec/Makefile | 1 + drivers/usb/typec/hd3ss3220.c | 263 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 274 insertions(+) create mode 100644 drivers/usb/typec/hd3ss3220.c